Installation stuck on "generating glibc base locales"

I've been using Arch Linux for about a year in a VM, and it's been working great. Today, I finally try dual booting XP and Arch. I partitioned my drive using a GParted live CD, installed XP, and started the Arch installation. I got through the installation up until finishing the Configure System step.
For about three hours now, I've been on "generating glibc base locales..." There's a 0 in the top right corner, and a cursor blinking in the bottom left. In my VM, this step usually took less than five minutes. The computer I'm currently installing Arch on has an Athlon 64 3500+, so I wouldn't expect it to take that long.
Any ideas? Is it safe to reboot the computer and start the installation again?

I rebooted, started over, and the install went fine this time. Thanks for the help.

Similar Messages

  • Exception generated during defered local transaction handling

    Hi All,
    We are using data direct connect 3.3 driver with MS SQL Server 7 on WebSphere 4.0. We are getting the exception "Exception generated during defered local transaction handling". Anyone encountered similar problem?> please let me know the solution. I am pasting the stack trace here.
    Thanks in advance.
    Regards,
    Girish
    [7/29/05 9:19:31:210 EDT] 37c1f1 SystemOut U 2005-07-29 09:19:31,177 [Servlet.Engine.Transports:10] ERROR com.xyz.nuuw.bus.dao.JDBCWrapper -livdsqa11122643171177
    java.sql.SQLException: [IBM][SQLServer JDBC Driver]Exception generated during defered local transaction handling. See next exception via SQLException.getNextException for details.
    at com.ibm.websphere.jdbc.base.BaseExceptions.createException(Unknown Source)
    at com.ibm.websphere.jdbc.base.BaseExceptions.getException(Unknown Source)
    at com.ibm.websphere.jdbc.base.BaseExceptions.getException(Unknown Source)
    at com.ibm.websphere.jdbc.base.BaseConnection.transactionableWorkStarting(Unknown Source)
    at com.ibm.websphere.jdbc.base.BaseStatement.commonExecute(Unknown Source)
    at com.ibm.websphere.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
    at com.ibm.websphere.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
    at com.ibm.websphere.jdbcx.base.BasePreparedStatementWrapper.executeQuery(Unknown Source)
    at com.ibm.ejs.cm.cache.CachedStatement.executeQuery(CachedStatement.java:312)
    at com.ibm.ejs.cm.proxy.StatementProxy.executeQueryCommon(StatementProxy.java:410)
    at com.ibm.ejs.cm.proxy.PreparedStatementProxy.executeQuery(PreparedStatementProxy.java:53)
    at com.xyz.nuuw.bus.dao.JDBCWrapper.getdata(JDBCWrapper.java:164)
    at com.xyz.nuuw.bus.dao.AccountSetupPH.getKeyID(AccountSetupPH.java:445)
    at com.xyz.nuuw.bus.bo.AccountSetupBO.getKeyID(AccountSetupBO.java:50)
    at com.xyz.nuuw.accountSetup.bus.ejb.AccountSetupSBBean.getKeyID(AccountSetupSBBean.java:85)
    at com.xyz.nuuw.accountSetup.bus.ejb.EJSRemoteStatelessAccountSetupSB_14ea1086.getKeyID(EJSRemoteStatelessAccountSetupSB_14ea1086.java:99)
    at com.xyz.nuuw.accountSetup.bus.ejb._AccountSetupSB_Stub.getKeyID(_AccountSetupSB_Stub.java:310)
    at com.xyz.nuuw.bus.AccountSetupBD.getKeyID(AccountSetupBD.java:73)

    I am currently working with IBM on a similar problem with WAS 5.1 and SQL Server 2000. The SQLException has a nested exception that can be retrieved using the getNextException() method. This will give you some more information as to what is causing the problem. Ours seems to be triggered by a dropped connection at the SQL end. normally WAS will recover from that gracefully, but in our situation it is not.
    Doug

  • Not able to generate excel file locally

    Hi guys,
    My web server & database server are on 2 different systems. I am trying to generate excel file locally but the excel is getting generated on server. Output path is
        c:\\" + output + ".xls
       There is no problem anywhere else in code. If a user on any system is trying to generate excel file it's getting
    generated on server in C drive. But the excel should generate on local system of that particular user.
    Is this code fine?
    \\c:\\" + output + ".xls

    wickedrahul9 wrote:
    It's on intranet, so security is not an issue.Yes, it is. Because of the inherent security problems, servers just plain can't do that. Do you think there's an "I'm running in an intranet" flag in your server? If there was, then bad guys would just set that flag on and write malware to any client that connected. Intranets aren't an excuse for sloppy security.
    Do I need to download the file from server?That's what I said.

  • Windows 8.1 installation stucked at 'Finalizing your settings' stage!

    I have G580 model. yesterday I was trying to install windows 8.1 but the installation stucked at "Finalizing your system" stage for about 18 hours! I tried several times to go to the BIOS for reinstall 8.1 or fresh installation of windows 7. but I cant enter into the BIOS by pressing F2/F8/F10/DEL whatever after restarting my system immidiately! what should I do! please help me to install my previous windows 7 OS.
    Solved!
    Go to Solution.

    If you performed a clean install, try again and see if it works out. The same thing which you faced happened to me while I was upgrading from windows 8 to 8.1, it took me a couple of tries before 8.1 would finally install.
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo

  • Why is the installer stuck on "Checking System Profile-"?

    I'm trying to install Flash Catalyst Beta on a MacBook Pro running OS 10.6.1 (Snow Leopard).
    The installer starts to work, but then it stops at the point where it checks the system profile (see attached screenshot). It doesn't seem to have crashed as the dock icon allows me to quit without force quitting the application.
    I've tried it in my regular user account and the administrator account, but the behaviour is identical.
    Any help would be appreciated.

    I appreciate all your efforts, but I¹ve just received my new copy of CS5, so
    I¹ll be installing the final version.
    G
    From: ritesh kapoor <[email protected]>
    Reply-To: <[email protected]>
    Date: Thu, 29 Apr 2010 04:32:06 -0600
    To: Gary Horsman <[email protected]>
    Subject: Why is the installer stuck on "Checking System
    Profile…"?
    Thanks Gary.
    I need to ask you a few questions and request you to perform some more steps
    so that I can debug your problem.
    1. Have you modified any folder permissions, authorization setup using
    Keychain Access utility (or any other tool)?
    2. Open a Terminal window, and run the command 'ls -l /tmp' and copy-paste
    the output printed on your screen in your reply.
    3. Delete all files whose name start with 'asu' in your /tmp folder. Run the
    command 'rm -rf /tmp/asu*'. Restart your machine.
    4. Launch the Flash Catalyst setup and check if installation proceeds
    successfully. If it doesn't, proceed to the step below.
    5. Open the folder containing the Flash Catalyst setup. Browse to the
    'packages' folder and rename the file 'install.sig' to 'update.sig'. Double
    click and launch the Flash Catalyst setup. This will not install the
    application but install the Adobe Application Manager. Let me know if you
    see a small dialog with a progress bar. Rename back update.sig to
    install.sig. Update us your observations. Continue to next step.
    6. Launch 'Disk Utility' app (from /Applications/Utilities). Select your OS
    partition in the left panel and click on 'First Aid' tab on the top. Click
    on the 'Repair Disk Permissions' button at the bottom.
    7. Again, launch the Flash Catalyst setup and check if installation proceeds
    successfully. If it doesn't, proceed to the step below.
    8. Open a Terminal window and navigate to the directory containing the Flash
    Catalyst setup. Run the command 'sudo Install.app/Contents/MacOS/Install'
    and enter the password. Let me know if the installer launches and on
    following the screen instructions do you still see the error screen or does
    the installation proceed successfully.

  • OBIEE 11g installation stuck at step 12 of 14 (0% copying files...)

    Hi All,
    I am installing OBIEE 11g on Windows7 32Bit OS.
    I have done with all the steps till step 11 without any error. However, ASA it starts the step 12 (i.e. Configuring WebLogic- Copying files...), installation stuck at 0% and do not continue. I waited for 8-10 Hrs but it never started copying files.
    Also, I tried the installation numerous times, but every time I got the same problem.
    I verified the logs as well, but there was no error.
    Please help me to resolve the issue.
    Regards,
    Ashish

    Yes, I got an idea, install OBIEE in a supported platform as your it's not supported at the moment:
    http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls

  • Solman installation stuck with error - SLES 10 , Oracle 10.2.0.4

    Hi,
    Solman 7.0 installation with ehp1 installation stuck with error - SLES 10 , Oracle 10.2.0.4
    the error is at the step install DBA tools -> error is 'select status from v$instance did not match /^\s(\S+)\s$S/gNaNOPEN MIGRATE'.)
    Just FYI : we had issue while installing Oracle , we have followed work arround 3 in the SAP Note 980426
    Kindly help to proceed further
    Thanks & regards,
    Prabhakar Reddy.Y.C.

    sapinst.log
    CJS-00084  SQL statement or script failed. DIAGNOSIS: Error message: ORA-01092: ORACLE instance terminated. Disconnection forced
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Data Mining and Real Application Testing options
    . SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
    ERROR 2010-11-21 06:55:22.502
    MUT-03025  Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Data Mining and Real Application Testing options
    ERROR 2010-11-21 06:55:22.533
    FCO-00011  The step runSapdbaroleSql with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|
    NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbaTools|ind|ind|ind|ind|11|0|
    runSapdbaroleSql was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-01092: ORACLE instance terminated. Disconnection forced
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Data Mining and Real Application Testing options
    Edited by: prabhakaryc on Nov 21, 2010 7:01 AM

  • Stuck at Generating Thumbnails

    Almost every time I import from my cameras it gets stuck on Generating Thumbnails. It will first say Time Remaining: 2 minutes, and then it will say 2 hours or more and just spin. I have to Force Quit. This time I can't get past this? What should I try?

    I'm still stuck on Generating Thumbs. I guess I'll have to call support.

  • My iMovie is stuck on Generating Thumbnails. Timer increases instead of decreasing.

    My iMovie11 is stuck on generating thumbnails. Timer increases rather than decreases.Have to force quit.

    You might be able to trick iMovie by temporarily moving that project folder out of the following location:
    Mac HD > Users > (your home folder) > Movies > iMovie Projects > (look for the name of the project that blew-up)
    Drag that project folder to the Desktop for the time being. Launch iMovie and see if it still tries to create the Project Thumbnails. If it gets past any error messages or other house keeping, you can create a new project. Otherwise, quit iMovie. Drag that project folder from the desktop BACK into your iMovie Projects folder. Try launching iMovie again and see if it gets stuck generating the Thumbnails.

  • Stuck on 'Generating report'

    I've seen this issue all over the web but nobody seems to have found a solution yet!  And solutions suggested don't seem to work for me!
    When trying to generate any report on a machine accessed through ARD 3.6.1, the system just gets stuck on "Generating report" but never actually produces the report.
    Viewing the machine's screen and controlling the screen all work fine.
    I've tried everything from removing preference files to completely removing and reinstalling ARD but no luck.
    I suspect it's a port forwarding issue (I forward ports 3283, 5900 & 5988) but just don't know.
    Any ideas?

    have you tried forcing reporting to run on the client?
    while the client is listed as online in ARD
    select the computer record in ARD
    in the computer record set reporting to run a few minutes from the current time.
    save the change to the record.
    wait a few minutes past the time you set reporting to run. Then try running a report on the client.

  • Stuck on generating previews for 13 files

    No matter what I do aperture is stuck on generating previews for 13 files. Canceling the task does not help. In fact after canceling I have to force quit aperture. And when I start it up again the same 13 files are being updated, but as usual the 13 files do not count down to zero but stay stuck on 13. I have no idea on how to find these 13 files that are supposedly being updated.
    Does anyone have any ideas. If these are corrupt files that aperture is stuck on is there any way I can find the culprit or do I have to rebuild something??? Any advice would be much appreciated.

    fotoguy wrote:
    No matter what I do aperture is stuck on generating previews for 13 files. Canceling the task does not help. In fact after canceling I have to force quit aperture. And when I start it up again the same 13 files are being updated, but as usual the 13 files do not count down to zero but stay stuck on 13. I have no idea on how to find these 13 files that are supposedly being updated.
    Does anyone have any ideas. If these are corrupt files that aperture is stuck on is there any way I can find the culprit or do I have to rebuild something??? Any advice would be much appreciated.
    in the Projects pane select Recent Projects it should be in that Projects list. If the thumbnails are grayed out you might think about Rebuilding the Library, hold down the "apple and option" keys when opening Aperture

  • Bootcamp Drivers Installer stuck at installing iSight

    I don't know why the installer stucked at installing iSight. Also, I tried to manually install Apple drivers but it also stucked at 'Copying files'. What happened?
    This Windows was converted from Parallels Virtual Hard Disk and cloned to Bootcamp disk.
    Will this affect the installation process?
    Cuz' I don't get any Windows disc.

    I'm sorry, I mean ' Searching drivers for device' or something

  • Oracle 11g R2 Grid Infrastructure Installation stuck on 65%

    Dear All,
    I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies. Have anyone of you encounter similar situation before? I can attach oraInventory logs as well if you want to have a look at that. Please let me know if you find any pointer or clue of this problem.
    Many Thanks
    Nukesh

    No nothing was being copied, the /u01/app/11.2.0/grid directory was empty and nothing was adding to the log or err files.
    Actually I found/resolved the problem and forgot about this post.
    It happens that in staging my server, iptables was enabled which stopped the progress.
    I had to issue 'service iptables stop' and 'chkconfig iptables off' AND REBOOT ALL NODES.
    Simply stopping the service allowed the installer to continue, but eventually the root.sh script has problems. Rebooting both nodes resolved the issue.
    Thanks

  • Installer stuck....please help =[

    I just got the 5300 xpress music phone and i decided to come here and install the nokia PC suite.
    I have windows vista, but if you need anymore information just ask.
    I get to the installer, and it goes smoothly until the "installing connectivity cable driver" at 61% and it won't go anymore =[

    Hi,
    How long did you wait when "installer stuck" happen?
    Anyway, see this:
    /discussions/board/message?board.id=pcsuite&message.id=16560

  • I'm trying to upgrade to itunes 10.x on Windows 7 Pro.  The installation stuck at the stage "Registering iTunes automation server".  I removed the Antivirus software and re-install iTunes again.  But still get same problem.  Any solution?

    I was trying to upgrade to itunes 10.x on Windows 7 Pro.  The installation stuck at the stage "Registering iTunes automation server".  I removed the Antivirus software and re-install iTunes again.  But still get same problem.  Any solution?
    JA

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

Maybe you are looking for

  • When exporting a .wmv in After Effects 5 the export adds additional black/Blank frames at the end

    We are experiencing an issue where we or a client provides us with a video that is a .wmv video, exported from After Effects 5 and it adds almost a second of data less video. What I mean by data less is the video renders out as WMV, 30FPS, 24 Bitrate

  • Can't get from ServletInputStream to ZipInputStream

    Here's a problem that's been bothering me: I'm trying to set up an import program where I submit a .zip file via POST to a servlet. I can submit the .zip and read its binary data just fine. I can also open a zip file that's on the server and parse it

  • Yahoo! Geocities preventing pdf files from opening in browser

    This is for information I have a web site hosted by Yahoo!Geocities. For some time I have noticed that pdf files mounted on the site will not open in an IE or Firefox browser window. Instead they bring up a pop up window asking what to do with the fi

  • Adobe, please checkout this application

    Hello Adobe, You should checkout our Flex / AIR Application. It is the largest Flex / AIR project / application I had ever seen. It has over 150 modules, built on 5 Flex projects and uses over 1150 libraries. The Functionality is enormous and the app

  • SAP GUI for JAVA - Search Help ALV display

    I need to be able to display search helps in the ALV grid format or the ' Dialog Modal ' option as seen on the <b>Settings for all F4 helps</b> tab under the personalize option for search helps. Currently when I am using a Macintosh machine the syste