Installed BPC 7.0 for MS, but cannot connect to server in admin console

I have installed BPC 7.0, and in the server manager, everything is ok, and seems to be running and there are no errors.  When I attempt to connect to the server with the Admin Console, I am getting the following error:
"The sstem cannot connect to the XXXXX Application server.  Verify that you have Specified a valid Application server name, or see if the Application server is unavailable at this time"
any help would be appreciated.

Hi,
I would request you to try few things.
1. This is might be because there are other processes using port 1080.
   Log on to the application server via Remote Desktop.
   Open Task Manager and select the Processes tab.
   Select ManagementAgentNT.exe and choose End Process.
   Select RouterNT.exe and choose End Process.
   Log into IIS and START the Default Website.
2. Another possible cause can be if the Server and Client are running different versions of BPC. If the version of BPC is different on the server and the client then an uninstall will need to be done on the client
3. The APPINFO.XML file is corrupt. Delete the APPINFO.XML file located on the client machine in folder "My Documents\OutlookSoft" and login again using the connection wizard.
Hope one of the above resolves your issue.

Similar Messages

  • I established a VPN configuration and connected but cannot connect to server?

    I work from an imac at home and need to connect to my work server and files.  I established the VPN configuration and connected to the building but cannot access the server.  What am I doing wrong or what else do I need to do.

    Once your VPN is connected, you still need to log in to the server(s) you are using.  This does not necessarily happen automatically - you may have to manually log in to your server(s).   To do this, in the Finder menu do Go > Connect to Server and enter the server address.  If these are windows servers it's probably an SMB connection in which case you would enter  smb://<serveraddress> in the server address field.
    Best bet is to talk with the IT folks where you work, as you may need specific information about how to log in to your server(s).  There are ways to automate the login but you first need the correct login details (server address, userID, password).
    If you want to automate the login process, here's a simple Applescript that I wrote in my own case.  Create this using Applescript Editor.  After testing, save it as an Application; then in System Preferences you can add it to your list of Login Items so it runs automatically whenever you sign in to your Mac.  Of course, your VPN will have to already be connected in order for this to actually work.
    delay 30
    tell application "Finder"
        mount volume "smb://servername1/mountpoint_A"
        mount volume "smb://servername2/mountpoint_B"
    end tell
    (Note: "servernameX/mountpoint_Y" is the address of each of the 2 servers I log into, except that in this example they are completely fictitious names.)

  • Trying to update my iPhone and iPad but cannot connect to server

    I have been trying to update my iPhone and iPad for 2 days but cannot connect to update server despite letting it try forever.  What is the problem?  Never encountered this before.

    Have your devices ever been jailbroken?

  • Wifi on but cannot connect to server

    Hi i have eventually got my touch to work on wifi but when i try any apps it says cannot connect to server, is there anything i can do to get it to work?
    im not techy minded so will need idiot guiding please hahaha

    See is this helps: http://support.apple.com/kb/TS1559

  • "send for shared review" cannot connect to server

    I'm trying use the "Send for Shared Review" feature in Acrobat 9. I want to send a pdf document to acrobat.com and share with others for review and comment. I first used this feature about 2 months ago and it worked without a hitch.
    Every time I try it by clicking in the menu "Send for Shared Review", I'm asked for my user name and password to connect to Acrobat.com. I type it in (I know it's correct because I can go to acrobat.com using my browser and the password works), the Acrobat.com dialog box comes up telling me it "can't connect to server." It has my correct log in information. If I use my browser to go to acrobat.com, I can log in fine, but then of course I can't get the mark-up feature for my shared pdf files. Any ideas what I can do to troubleshoot? I'm at a loss.
    I'm using Acrobat 9 and Mac OS 10.5.8

    I'm having the same problem. I've
    been using this for over a year without an issue, today I am getting the same message, can't log into the server. It works on my pc but not my mac. Any answers

  • HI,,,,, i HAVE USED THE SITE CALLED OUTPERSONALS FOR SOMETIME BUT CANNOT CONNECT ANYMORE EVEN THROUGH EMAILS RECEIVED FROM THE SITE ,,, ANYBODY THERE HAVE SUGGESTIONS PLEASE ,,, THANK YOU ,,,

    used the site lots in the past but it now says its insecure site
    and wont connect me

    Hi Ken,
    Wow, I've logged into adobe and never seen your response until now.
    I need to make the forums more of a daily stop I guess.
    Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared  
    Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
    I have of course rebooted,
    Gone into taskmanager, killed all the relevant threads,  tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
    On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
    Is there a way we can use it more of a "ftp" sort of thing, when I want to I can  put files there?  There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting.  Just an fyi. for what it's worth.
    Please, feel free to contact me,
    I'm on g+ chat [email protected]

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Just installed the latest upgrade for iTunes. Cannot open iTunes store?

    Hey there Ray Neilson,
    It sounds like you are able to open iTunes but cannot access the store. I recommend the troubleshooting from the article named:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Troubleshoot issues in Windows
    If you haven't been able to connect to the iTunes Store for more than a day (and other customers on our discussion boards aren't experiencing similar issues) a software or Internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If iTunes Store appears empty and only displays the message iTunes Store, follow these steps.
    Try the steps to troubleshoot iTunes Store connectivity in Windows.
    As with all firewalls not manufactured by Apple, you may need to configure Windows Firewall to allow iTunes to access the iTunes Store. Follow these steps for Windows XP, Windows Vista, and Windows 7.
    Try disabling any proxies built-in to Windows. You should avoid proxies because they can cause issues.
    If you're receiving a specific error message, follow these steps.
    If the issue still persists, contact your Internet service provider and confirm that these ports and servers are enabled over your network.
    Note: The hosts file may be blocking the iTunes Store.Microsoft's article How do I reset the hosts file back to the default? has instructions and a FixIt to have Windows try to reset the hosts defaults for you.Note: Some workplaces may put internal resources in the hosts file and may block iTunes Store. The FixIt doesn't work for Windows 8.To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions below:
    You can find the hosts file at: C:\WINDOWS\SYSTEM32\DRIVERS\ETC.
    Select the hosts file. There should now be a duplicate of the hosts file named "Copy of hosts" (Windows XP) or "hosts-copy" (Windows Vista, Windows 7, or Windows 8).
    Drag the original hosts file to your desktop.
    Right-click the duplicate file and choose Open. You may be prompted to choose the program you want to use to open this file. Double-click Notepad.
    When Notepad opens, choose Edit > Select All.
    Choose Edit > Delete.
    Choose File > Save.
    Close Notepad.
    Right-click the duplicate file, and choose Rename.
    Type "hosts" (without quotation marks) and press Enter.
    Restart your computer and try connecting to the iTunes Store.
     If you still can't connect to the iTunes Store, your security software or firewall may be blocking the ability of iTunes to communicate with the Internet. Learn how to resolve security software issues.
    If the issue persists, try the troubleshooting in this article:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • JavaService - can install java program into win2k service, but cannot run

    i have a JavaService problem: i can install java program into win2k service, but cannot run
    the version of javaservice is 2.0.7.0
    the following is the message:
    C:\DailyUpdate\dist>JavaService.exe -install DailyUpdate C:\Program Files\Java\j
    dk1.5.0_05\jre\bin\client\jvm.dll -Djava.class.path=C:\DailyUpdate\dist\ftpbean.
    jar;C:\DailyUpdate\dist\mysql-connector-java-3.0.10-stable-bin.jar;C:\DailyUpdat
    e\dist\DailyUpdater.jar -Xms16M -Xmx64M -start DailyUpdateHandler -params C:\Dai
    lyUpdate\dist -out C:\DailyUpdate\dist\logs\out.log -err C:\DailyUpdate\dist\lo
    gs\err.log
    The DailyUpdate automatic service was successfully installed
    The DailyUpdate service is starting.
    The DailyUpdate service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.

    I might be doing some programming for my company soon
    which will require a program to monitor a database
    and whenever there is a change to certain fields, it
    must copy certain fields into another database. When I see "whenever thiere is a change to certain fields" I tend to think "triggers" - but maybe this won't work for you 'cause of the "another database" part. And the fact that triggers are inherently evil.
    [snip]
    Is it possible to run a Java program as a windows
    service? And if so then how would you go about it? I'd hit Google - there're a couple ways to do this.
    [snip]
    Also,...if I were to use one of those programs which
    can make an .exe of a Java program, then do you still
    require the JRE to be on the machine? It depends on how you did the conversion. If you compile to native then no, if you just wrap up a JRE then yes.
    Why I ask is
    that I occasionally get asked to do small development
    projects for my company, but we are a microsoft
    partner and therefore do all the development in C#
    and the like. So I would like to just implement as
    many things in Java as I can, just to show everyone
    that Java can do exactly what C# can do. But its
    difficult to convince people of this since I always
    require the JRE and they dont. Of course, they require the .NET framework and you don't. And last I looked that thing was around 23 Meg.

  • Windows 7 displays the icon for my C3180 (connected to an XP PC) but cannot connect to it

    I have a Photosmart C3180 connected to an XP Pro PC on a LAN. I have a 2nd PC connected to the LAN. I upgraded this 2nd PC from vista business to win 7 32 bit home. The Win 7 PC can 'see' the printer on the network but cannot connect to it. It says: 'Operation failed with error 0x0000046a'. I downloaded and installed the Win 7 32 bit programs and drivers for this printer. It works if I connect it to the Win 7 USB but not across the network. Any advice greatfully received.
    Thanks

    Here is a url that goes to a great HP printer diagnostics utilities page. You should be able to find a network connection utility on the page that helps you solve your connection issue.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Installed Facetime on MacOSX10.6.8 but cannot send or receive calls?

    Installed Facetime on MacOSX10.6.8 but cannot send or receive calls?

    Hello, Tinapepina.
    Thank you for the question.  This article will help you troubleshoot the issue you are experiencing with FaceTime on your iMac. 
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Cheers,
    Jason H. 

  • I purchased a 1 year license for Acrobat but cannot download it?

    I purchased a 1 year license for Acrobat but cannot download it? Anyway I can talk w someone via telephone?

    Download and install the trial version from http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html then activate it with your Adobe ID.
    Make sure you follow the Very Important Instructions on that page.
    If you still need help Contact Customer Care - click on the Still need help? button to chat with an agent.  Phone support is only available Mon-Fri during US daytime.

  • HT1926 iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    iTunes will not install on my computer (Windows 8) and i tried everything in "Issues installing iTunes or QuickTime for Windows" but nothing worked. any help?

    Many thanks.
    Error 7 (Windows error 127)
    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    I have CS2. I shot RAW files with my Nikon D90 and now cannot open them in PS.  I heard there was a plug-in to download for this, but cannot find it. Help?

    You would need at least CS3 with ACR 4.6 to natively edit NEFs from a D90 in PS:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    It might also work to use the DNG Converter 4.6 or newer to convert the NEF files to DNGs and then those might open in your older CS2 ACR, but I’m not sure, since it’s a 9 year old program I haven’t used in years.
    The DNG Converter can be found, here:
    http://www.adobe.com/downloads/updates.html

  • HT2731 I want to use I tunes prepaid amt to buy music, I checked none for cc, but cannot seem to purchase music eith money on my acct, send how to instructions

    I want to use I tunes prepaid amt to buy music, I checked none for cc, but cannot seem to purchase music eith money on my acct, send how to instructions

    I have the same issue and it does not m,ake sense. No fix for it yet. it *****.

Maybe you are looking for