Installed itunes and now cant see my cd stations on my computer

so first off thanks for forceing me to install this virus on my computer that completly caused tons of problems for me.
So the problem i have is that i installed Itunes and now i cant see my cd stations i tryed to update the drivers and it doesent work. so what can i do to solve this problem except to format my whole dam computer.
The CD/DVD station that i use is a sony optriac AD7280s

Hello there, elainefromnaul.
It sounds like your iPod nano has stopped being recognized in iTunes. the following Knowledge Base article offers up some great, in-depth steps for troubleshooting that very issue:
iPod not appearing in iTunes - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • Hi, I've got no music or videos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    Hi, I'm unable to see if I have any music/videos/photos on my ipad and itunes advise that I have 23gb of 'other' material therefore the sync is unable to perform when  transfering music/videos to the ipad. I was forced to perform a restore earlier and now cant see the videos/music so want to replace. Pls assist, thanks

    23 GB  of other indicates a corrupt file(s).  A restore should resolve.

  • Downloaded the latesty update for itunes and now cant open itunes at all keep getting a file missing error whats doing on ????????????

    installed latest update of itunes and now cant open it at all i get a message saying theres a file missing and i need to re-install itunes but after the 6th time its still the same ,getting really ****** off with it now !!!!! HELP!!!!!!!!!

    Hey crebely!
    I have an article here for you that may help you troubleshoot and resolve this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • After an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    after an update itunes will not open. there is a missing msvcr80.dll i tried to re install itunes and now it says check system services. I have full admin to pc

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

  • At the starting iphone showed up in my computer as digital camera then i installed itunes. and now iphone isnt showing in my computer neither in itunes :(

    i have recently bought iphone 3GS and when connected it to pc it showed up in my computer named as digital camera .. itunes was not installed at that time. then i installed itunes. and tried to connect it since then iphone isnt showing in my computer neither in itunes

    http://support.apple.com/kb/TS1538

  • HT1296 my computer crashed and I had to reinstall itunes and now I cannot sync my ipod with my computer

    My computer crashed and I had to reinstall iTunes.  Now I cannot sync my iPod with my computer.  Any suggestions?

    Was this issue ever resolved?
    Ditto for me!  I am so upset because about 15 years, I've had the same old Toshiba Gigabeat MP3 player which worked perfectly fine until the day Gigabeat (the software) upgraded to a Vista-compatibility program which made the MP3 go haywired!!  I couldn't get the MP3 player (again) to work as normal prior to the update.  Then, two years later, the business no longer supports MP3 players, nor does it invest in software patches!  Now I have a failed equipment ... though it still plays, but just won't let me work the controls to choose or select tracks!  I can only operate the on/off button on the Toshiba Gigabeat MP3 player! AND, concidentally, the battery seems to shorten (lessen)!  Interesting...
    Then, I decided okay, I had enough...I can't play over 5.000 songs just to return to start; I decided to purchase the Apple iPod Classic 160 GB Silver!  I've had it only since March 2012.  It worked wonderfully at first.  It took me months to put all the music from my CDs to this magical device.  And, then, all of a sudden, my computer CRASHED (ironically in JUNE 2012!!) and lost all on the hard drive ... perhaps it is not ironic afterall.
    Here's a tall quesion to Apple manufacturer, are they preparing us to confiscate our equipment?  It sure seems that way to me! 
    No support from Toshiba (which, by the way, are currently investing in so-called "green energy in nuclear projects" in the state of Texas), nor is there any support by Apple ... Interesting!  Sorry for babbling.  But I'm tired of big money making corporations putting on the bluffer masks on the public!  Something just ain't right!  Hold tight to your vinyls, tape decks, cassettes, 8-tracks and CDs...  This may be just another whim to making big time money!

  • Copied Itunes from Win to Mac and now cant see anything in Mac Itunes

    Followed the whole process of copying my itunes (v7) from windows xp to my ipod, and then to my mac (itunes v7).... but now I cant see any music in my mac itunes... help!! been researching this for hours and cant find an answer...

    Hello,
    try the following:
    1. I assume your ipod is in windows format
    2. get Senuti - http://www.fadingred.org/senuti/ this software can copy songs from an ipod back onto a computer. It doesn't matter which format the ipod is
    3. follow the instructions on Senuti. To copy the songs over to you computer just select all of them in Senute and press the green "transfer" arrow.
    4. I have done this 2 days ago and it works perfectly
    5. After all the formating don't forget to reformat the ipod to macformat in case you want to use it with this machine

  • Installed itunes and now my CD won't work!!!!!

    I just bought an ipod, and installed itunes on my PC laptop. then, all of a sudden, My Computer won't show the CD drive anymore. does anybody know how to resolve this???
    Thanks

    hi culatone!
    ... the curse of the Packard Bells strikes again ...
    the treatment from the following MS KB doc has been working for the disappearing optical drives on Packard Bells (even new ones which have never had those versions of Easy CD Creator or InCD installed on them). the Packard Bell versions of this typically show the "code 41" error message in Device Manager:
    (MS) CD-ROM access is missing and messages cite error Code 31, Code 32, Code 19, Code 39, or Code 41 after you remove Easy CD Creator in Windows XP
    keep us posted.
    love, b

  • I updated itunes and now my songs will not sync from the computer to ipod

    I just updated my itunes software and my song will not transfer to the ipod. I tryed a new port but tha seems unlikly because itunes does reconize the ipod it just will not update the songs. I restarted the ipod that did not work so i updated the installed software and refreshed the ipod noe I have no songs because it wiped out the ones that were there from the old sync. I have tryed doing a manual update as apposed to the automatic update but that did not work either. I have tryed turning off my anti virus software but that did not work??? any ideas?

    Ive had the same problem and I restored my i-pod then when i hooked up the i-pod it said it was full and asked If I wanted it to select a few songs to put on, i clicked yes thinking It meant it would just put my selected songs on but then it put 675 songs out of the library on when i only have 67 checked. they play wether tehyre checked in the Library or not, is there any way to fix this?

  • I have upgraded to itunes 11.1.3 and now cant see how I sync my devices?

    Can anyone tell me how I now sync my devices thru itunes on my Macbook, since upgrading to 11.1.3. The only tab for devices is greyed out?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • I had to re-install iTunes and now when I try to sync/modify apps I can't

    I had to reinstall itunes onto the original laptop I synced my phone to and when I try to remove some apps to provide space for an iOS update, I get the error that "apps installed on iPhone can not be determined".  Help...

    This has been discussed here many times. Click on this search link and see if there are any solutions in the threads. Best of luck.

  • I deleted all of my songs on itunes and now cant get them back

    Last night i deleted my songs as i wanted to put the ratings from my ipod nano 3rd gen onto them. However to my horror when I went to put the songs from my nano onto my itunes, they didn't drag across, so i am now left with the horrible choice to download all of my songs again, unless someone can tell me how i can get them back, they weren't all saved to music files on my computer either. So does anyone know what I can do to get them back.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I recently bought a new computer and have installed Itunes and now want to import all of my music from my I tunes folder to the Itunes library.  How can I do this?

    My music is all in a folder in D drive and the folder is called I tunes Music.  When I open the I Tunes program it gives me the option to go to library and then to add files.  I want to add the entire folder as there are too many individual files(songs) to add individually. It would take much too long to add each file.  How can I add the folder and have I tunes recognize all my songs in the library?  I had things nicely working when I was using windows 7. Thanks

    Drag the folder into the library in the open iTunes program window.
    (113784)

  • Installed iTunes and now my pc won't read any cds-PLEASE HELP!

    Anyone have an answer for this? It won't recognize anything...audio cds, cd-roms, nothing. If I go into my computer, the cd drive isn't even listed on there.

    Sorry, was at work. Ok, here's the diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    iTunes 4.7.1.30
    CD Driver 2.0.4.0
    CD Driver DLL 2.0.2.0
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.4.0),
    Video Driver: NVIDIA GeForce4 420 Go 32M GeForce4 420 Go 32M
    Check the website of your computer manufacturer or video card vendor to verify that you have the latest video drivers.
    IDE\CdRomTOSHIBADVD-ROM_SD-R2512________________1A04___
    Failed while scanning for CD / DVD drives, error 2380.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

  • I installed iTunes and now my screensaver won't work.  Windows 7.  I have uninstalled iTunes and all the extras that came with it.

    screensaver wont' work after installing iTunes

    You could try this...
    Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
    cmd /k assoc .scr scrfile
    Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
    In principle that should restore the correct file association for screensaver files.
    tt2

Maybe you are looking for

  • How do I correct File Sharing problems between 2 Lion installs?

    I have having a strange problem with file sharing between 2 mac's that have Lion Installed. One is a MacPro with a clean install of Lion and the other is a MacBook that was upgraded with Lion. Both systems have file sharing enabled (just public folde

  • Separating images within a photo

    I have many birding photos with several birds in one image, such as 3 terns flying.  I want to be able to move one bird closer to another bird. Is that possible?

  • Packaged function not compiling

    This one is driving me mad as I cannot see any possible reason for it. I have two packages containing functions. They are both owned by one schema, different to the schema I am using to build my form. They are both granted execute to public and have

  • Urgent need of some assistance.

    i will post a code here from Table.java.. i have been reading the code for quite a few minutes now. However, i can't find the part where the JTable variable has been initialized. I believe it's this one... JTable table = new JTable(new MyTableModel()

  • XML extracting

    hello, I'm trying to get some values from XML file, but unsuccessfully. I have attached the file. I'm not familiar with XML and don't know what to say more. Have You any ideas?? Thanks in advance. d.acha