Installed lion and now I have a locked harddrive and do not have the persmissions, how do I fix this?
installed lion and now I have a locked harddrive and do not have the persmissions, how do I fix this?
Thanks for the link. It is a wealth of good info. I still haven't been able to determine what caused my crash, but with the link you provided I should be able to track it down. Hopefully it was just a one time thing. After using the power button and rebooting all seems ok now. Thanks again.
Similar Messages
-
iPhone 4S updated to IOS 7.0.6 and now my Photo Stream doesn't synch photos to my Camera Roll - how do I fix this?
seems like your phone isn't activated properly. try doing a hard reset (hold power+home until phone restarts).
if you have a CDMA carrier, this might not fix it for you. call the carrier and ask them to reset the activation. -
I keep trying to install and reinstall itunes but keep getting apple application support not found...how do i fix this?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally.
tt2 -
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Hey I bought an iPhone off gumtree and everything was well. But then I tried to set it up and it asked for the apple if of the previous owner and so I asked him for it his Apple ID but refused to tell me so I can not use the phone. how do I fix this?
Contact them back and have them follow these instructions Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
-
I upgraded to ios5 and now I can't log into my Ipad with the password I had set and been using for the last 2 years. What do I need to do to get logged in?
You will have to format your iPad. Looks like that's the only way to reset your password.
Formatting your iPad
Turn off your iPad, turn on iTunes, hold large button down on ipad while connecting the white ipad cord to your Pc.
When the window prompts format iPad,let the button go and press format button on iTunes.
That is how I solved the same problem. -
My sister changed our primary AppleID email address to her email so now I can't log into my iTunes account on my phone. I tired syncing my iphone to my mac and it wont even sync anymore. We share the same account. Is there a way to fix this?
Hello Alexandra,
Thank you for the details of the issue you are experiencing with iCloud on your devices after updating your Apple ID. I recommend the following steps:
Symptoms
iOS 7 may ask for the password to your previous Apple ID when you sign out of iCloud.
Resolution
1. Use your current Apple ID password
Trying using your current Apple ID password. If that doesn't work, continue to the next step.
2. Sign out and back in to iMessage or FaceTime
If you are currently signed in to iMessage or FaceTime
If you are not signed in to iMessage or FaceTime
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud and try to sign out.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Tap Settings > iCloud and sign in with the new Apple ID.
Find the full article here:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Ive just recently reinstalled both my pc's and now i cant recreate my sync acount.
How can i work around this ??Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
I just updated my itunes after receiving an alert through my windows 8. My laptop automatically restarts after an update to secure the changes in setting and applications. But a minute after opening itunes and its loaded, a windows alert pops up stating that Itunes has stopped working. How can I fix the problem without losing the music in my Itunes?
Hi Meagisamonster,
I would like to suggest the you use the information in the following article to help you address this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My iphone 5s became stuck in recovery mode while I was trying to backup to icloud. How can I get it off of recovery to save my photos? It wants me to restore in itunes but I'm afraid I will lose my photos.
IF your phone is in recovery mode, then there is no data on it.
If you didn't import your pics or have photos stream enabled or have a previous back up, then sorry your pics are gone. -
I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?
Do you see a half moon icon in the upper right corner of the screen? If so, you have Do Not Disturb enabled. Settings>Do Not Disturb. Turn it off.
Or do you have system sounds muted?
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center. Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
About the iPad Side Switch - Apple Support -
Have over 86GB of music now showing as "other" and although it is still on my iPod it is not playable. Most is from imported CDs. I do have a backup file on an external hard drive. How can I fix this?
To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
Delete the "songs" that do not play in your iTunes library and reimport them. -
Recently downloaded new software and now all of my wife's contacts appear in my contacts. How do I change this?
I suggest creating a separate AppleID for iCloud for each individual and using the same one for iTunes. By having a separate one for iCloud you can keep your contacts separated, have more iCloud storage (5 gigs each instead of sharing 5 gigs) and each have your own iMessage contact. Otherwise you both will be able to see each others imessages. You can still use the same AppleID for the iTunes Store to share music and app purchases. The iPhone "Settings" has different location for inputting your iCloud and iTunes AppleID.
-
I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?
The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
I have downloaded iOS 7.1 but now my phone just reboots all the time, how do I fix this?
I have downloaded iOS 7.1 but now my phone just reboots all the time, how do I fix this?
Hi Will555uk,
Thanks for visiting Apple Support Communities.
If your iPhone is restarting unexpectedly, I recommend starting with step three in this troubleshooting guide:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy
Maybe you are looking for
-
Multiple tree objects in ApEx 4.0
Hi all, I'm working on a project where i need to put 2 tree objects in one region. First tree object is correct but when i add my second tree below the first one no data is shown or the wrong data is shown. Strange thing is when i put the second tree
-
When I try to make my purchase from my iCloud upgrade this is purchases cannot be completed at this time try back later
-
Adapter_plain service settings
Hi, We have a user logged on to XI client 100 and he is trying to test the "adapter_plain" service. He tries tcode: sicf>default_host>SAP>xi>adapter_plain--> right click test service --> and he gets logon screen trying to connect to cleint 000 instea
-
This is probably really simple but I can't figure it out. I have a clip on V1 and want to move it up to V2. I don;t want to slip the clip. Shift dragging it doesn't constrain it. How can I do it please?
-
Hey. Why can't i see all my photos after recovery? They are all there (same number as before) but many of them are just grey thumbnails marked with JPG and PNG text. When you open them they look exactly the same as the thumbnails. When i try to send