Installed Oracle database express edition but not can't access c: drive

I downloaded and installed oracle 10g express edition (universal) on my windows 7 64bit computer and went through the set up but I changed the default installed path to just c: drive (thinking it would create a folder by itself). After finishing the installation, my c: drive shows zero gb. When I try to open my c: drive I get a message saying "c:\ is not accessible. Access denied." All my files are there as i used folder shortcuts to access them. I tried uninstalling oracle but hit an error saying:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is valid Windows installer package."
I can't install any programs or save/copy to any folder in my c: drive but I can save/copy to desktop.
Please help by any means, thanks.
Edited by: 796973 on Sep 23, 2010 9:19 PM

796973 wrote:
Please help by any means, thanks.
This happens when you don't follow the installation guide and think you are smarter then the software.
When the installer warned you that the installation path you were choosing was not empty and asked you if you wanted to install anyway...You answered YES!
Now you lost you drive c: file system.
Tough luck!
:p

Similar Messages

Installing Oracle Database Express Edition 11g on UBUNTU

Hello everyone,
I want to install Oracle Database Express Edition 11g on UBUNTU. I followed the steps from this link created by Dude:
https://forums.oracle.com/thread/2303639?start=0&tstart=0
My problem becomes when I type in from the terminal:
sudo /etc/init.d/oracle-xe configure
I followed the instructions there, agreeing t HTTP port 8080, port database listener 1521, specifying a password for my database account, and wanting Oracle Express to be started on boot. This is what I'm getting:
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directory
Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
I have no idea what this means, so I went into the log's location and I found 4 of them, so I clicked on each of them, and this is what I'm getting:
1. cloneDBCreation.log:
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
Create controlfile reuse set database "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system enable restricted session
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database "XE" open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database rename global_name to "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system switch logfile
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system checkpoint
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
2. CloneRmanRestore.log
ORA-00845: MEMORY_TARGET not supported on this system
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
3. postDBCreation.log
begin
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
File created.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN utl_recomp.recomp_serial(); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
4. postScripts.log
CREATE OR REPLACE LIBRARY dbms_sumadv_lib AS '/u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
create or replace directory XMLDIR as '/u01/app/oracle/product/11.2.0/xe/rdbms/xml'
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ORACLE_OCM_CONFIG_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ADMIN_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY WORK_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_swrf_internal.cleanup_database(cleanup_local => FALSE); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
Can somebody that knows this, or has installed Oracle Express on Ubuntu, to please explain it to me what does it mean and why am I getting those errors. Please explain thoroughly as if I am an amateur person, IN DETAIL, STEP-BY-STEP. I want to run it and make it work! I heard that it encourages people to answer for points. I am open for your suggestions and experiences, as long as it's not 'use common sense', 'you're dumb', or an answer that is vaguely explained. Thank you for those that take the time to read it.
ec557fac-f825-4356-a220-1ec941ce7cd0

Hi Pradeepcmst,
Thanks for your suggestion, but I found it sometimes misunderstanding on what he's trying to say - his instructions are not step-by-step and precise. Instead, I found this link that helped me a lot:
Installing Oracle 11gXE on Mint and Ubuntu | The Anti-Kyte

Can I install Oracle Database Express Edition(XE) on Windows 8 (64 bit)

Hi All,
I would like to know whether I can install Oracle Express Edition 11g Release 2 on Windows 8 - 64 bit . Please let me know this is for learning purpose only.

Currently, no Oracle software is certified to be installed on Windows 8. Certified OS versions for 11g XE are documented - http://docs.oracle.com/cd/E17781_01/index.htm
Installing on an unsupported OS may or may not succeed - if the instal succeeds, it is not a indication that the software will work as advertised - any issues you will have to troubleshoot on your own
HTH
Srini

Oracle Database Express Edition 11g Database home Page is not Displaying

As I am Java Developer and wanted to do JDBC connection for Java.....
So I Have Installed Oracle Database Express Edition 11g......
But the home page on url...http://127.0.0.1:8080/apex/f?p=4950
is Not Working.....
I am Using Windows Xp....SP 3.....
Help Me for this....
Thanks & In Advance.....
Jugal Thakkar

972423 wrote:
As I am Java Developer and wanted to do JDBC connection for Java.....For Java, JDBC and JDeveloper related discussions, you'll find plenty of forums:
https://forums.oracle.com/forums/category.jspa?categoryID=285
https://forums.oracle.com/forums/category.jspa?categoryID=500
So I Have Installed Oracle Database Express Edition 11g......
But the home page on url...http://127.0.0.1:8080/apex/f?p=4950
is Not Working.....Just installed? Never worked before? Unreachable 'Get Started' page usually indicates that install was not completely successful, database creation failed because of OS misconfiguration.
Before even trying that url you should see a endpoint with port 8080 in Endpoints summary from lsnrctl stat command.
Use search and have a look through previous threads for this FAQ.
E.g. https://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bpage+%2B4950&objID=f251&dateRange=thisyear&userID=&numResults=15&rankBy=10001

Using Oracle Database Express Edition in development environment

Hi All,
I have doubt regarding the usage Oracle Database Express Edition in Development environment. I am not sure weather I can ask a non technical question here or not. Pleas forgive me if I have done any thing wrong.
I am working in an IT company where we take up projects outsourced by our clients. As part of our current project we are making some modification to a web application used by an institution. Our client is using Oracle Data Base standard edition. Due to budgetary constraints of our Company we can not set up a Oracle standard edition data base in our development environment.
So would it be illegal if we use Oracle Database Express Edition in our development environment? We can guarantee that only our internal development team which comprise a maximum of 10 people will have access to this development database and this development data base will never be opened to our Client for their business purpose(Who have their own Oracle standard edition in their environment). As part of the project we delver only table DDL script and stored procedure to our client and they put it in their environment.The sole purpose of a internal Express database will be development only.
Could some one please tell me if it would be violation of license agreement if we install Oracle Database Express Edition in our development environment.

Hi Paul,
Actually I have already gone through the Oracle Technology Network Developer License Terms for Oracle Database 11g Express Edition . But was not quiet clear about the content. It says in the license terms that "We grant you a nonexclusive, nontransferable limited license to use the programs for: (a) purposes of developing, prototyping and running your applications for your own internal data processing operations". Does the term "your application" includes an application we are developing for another company. Since the Express database is installed in the development environment only and is not opened to any one else not even for Our client it definitely falls under the term "internal data processing operations" right?

Connect Problems with Oracle Database Express Edition 11g Release 2

Hello,
I am a student trying to install Oracle Database Express Edition 11g Release 2 and SQL Developer on my home system, Win7 64Bit, in order to practice some things I've learned from me DBA class and Developer classes.
Anyway, I have everything installed, but I am having difficulty connecting as SYS or SYSDBA in the 'Run SQL Command Line', I keep getting the ORA-01017: invalid username/password: logon denied.
However, If i select the 'Start Database' I get this:
C:\oraclexe\app\oracle\product\11.2.0\server\bin>
and I can type sqlplus / as sysdba and it starts up just fine and show user lists me as "SYS".
but if I go back to 'Run SQL Command Line' I still cannot connect as SYS or SYSDBA...I find this both confusing and frustrating. I don't know if I am in different instances or something like that, but I seem to be limited to connecting only as "SYSTEM". I need SYS because I want to practice creating datafiles, instances and things like that, but I seem to be lost.
Also, I am trying to create a new DB connection with SQL Developer and I can only us SYSTEM for my login which, if I understand correctly, will limit my privileges. Again When I try to sign in with SYS or SYSDBA I get error'd out. When I installed Ora11gDBExpress I was prompted in input a single password that was supposed to grant me access as SYS or SYSTEM, but I am limited to only SYSTEM for some reason.
So, I am looking for help/guidance as to what to do.
Thanks in advance for any and all help,
Warren

General rule of thumb, don't use sysdba unless you want to shut down the database, or grant a database user privileges on a sys object.
A SYSTEM connection is not "limiting", it has the DBA role which means a user with a system connection can do most anything needed, including select/update/delete/drop any user's objects as well as change parameters in the instance.
The system user can indeed add datafiles, tablespaces, etc. The instance and database should already be created as long as the installer completed all its chores correctly. For XE, per the license agreement only one instance can run on one host. If you want to try creating a database, it will require shutting down the XE instance and creating a new database service, creating the database, and installing the system catalog and any other optional components desired. Good practice indeed, but a bit advanced for the new user.
Do create users for schemas ... connect system; create user <username> identified by <password> and connect <username> for the schemas (a collection of objects) within the database. Grant the resource and create session privilege to <username> to allow the database user the ability to create tables, indexes, stored procedures, etc.
There is no "or" in a sys as sysdba connection, from 10g onwards a sys connection requires using the sysdba privilege. To enable a sysdba connection, add your host user to the ORA_DBA group on the host. To verify the OS users in the ORA_DBA group, this might work for win7, in a cmd box ...
$ net localgroup ora_dba
...If your OS user is in the ora_dba group the sys as sysdba password is not relevant, you can in fact type anything for a password. If you wish to connect with the sysdba privilege from a remote client, that is a bit different and requires knowing the password set in the instance password file. Which should be set the same as the system password defined in the installer, but you can change that by creating a new password file. Another slightly advanced topic.
In Windows IMHO its better to leave the listener and database set to Manual start (in the services applet, Start/Run/services.msc) and start the listener, then the database, when its needed. At least for an XE instance, as its intended for practice and learning RDBMS management.
Edited by: clcarter on Mar 2, 2012 6:19 PM
fix typos

Upgrade oracle database express edition

good morning
i've a question i'm working with oracle database express edition but now the memory is full and i want to upgrade it to oracle enterprise edition but i don't know the steps please can you help me in this
best regards

I've a question i'm working with oracle database express edition but now the memory is full and i want to upgrade it to oracle enterprise edition Hi,
Not to dissuade you from that, but that's quite a leap from XE to EE, are you sure that SE One or SE would not be a 'better option' for you?
Also, by 'memory is full', I assume you mean you've reached the 4Gb data limit?

Oracle Database Express Edition 11g for 64bit Windows

Hi Folks
Is it ok to install Oracle Database Express Edition 11g for 32bit windows on a 64 bit Windows 7 (Ultimate Edition) machine? I am not able to fiind a 64 bit Oracle Database Express Edition 11g, only standard edition. Hope someone can advise. Thanks.
regards
John

Hi HuaMin Chen ,
Thanks for the quick reply. I am not sure if I am reading you correctly. You are saying there it's fine to install the 32bit 11g express edition on a 64bit machine?
regards
John

Unable to start Oracle Database Express Edition (XE) on window 7 - 64 bit

I installed Oracle Database Express Edition (XE) on a WINDOWS 7 - 64 bit machine. I tried "Get Started" and http://localhost:8080/apex. It does not start/connect of anything. Please help.
Thanks.
Debbie

I received the following message from lsnrctl status
and sqlplus / as sysdba.
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 20-JUL-2012 17:09
:16
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MW777SXH4ITNY4.dir.svc.a
ccenture.com)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1004: Unknown error
C:\>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Jul 20 17:10:04 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL> select sysdate from dual
2 /
SYSDATE
20-JUL-12
SQL>
Does this mean I am up and running? I selected from dual. I will continue to play with the DB.
If I download SQL Developer, should the version be for 32-bit or 64-bit for PC - Windows 7 - 64 - bit?
Thanks.
Edited by: 893328 on Jul 20, 2012 2:58 PM
Edited by: 893328 on Jul 20, 2012 2:58 PM

Oracle Database Express Edition 11g r2 win_32bit installer

hello frnds ,I installed oracle database express edition 11.2 r2 release and during the installation I faced this problem .plz help me out give your suggestions.
The installer is unable to instantiate the file c:\Users\Sanjeev\AppData\Local\Temp\{1A2BC859-9070-483E-BC9D-A24D29920FDF}\KEY_XE.reg .The file does not appear to exist.

Pl post OS details. Pl review previous threads on this topic
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=KEY_XE.reg&rankBy=relevance&contentType=…
Are you heeding and following all of the instructions in the fine Install Guide ?
HTH
Srini

Not installing Oracle 10g Express Edition Beta 2

Hi,
I am in problem to install Oracle 10g Express Edition Beta 2 on Windows 2000 Pro. I have download OracleXE.exe but when i am double clicking on it, it is not working. What are the problems? Please help me
Dulal

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

Oracle Database Express Edition - install on WIndows XP laptop

I downloaded the Oracle Database Express Edition to my Lenovo T61 laptop - Windows XP professional, execute the setup.exe and load the software fine. When I press the Finish button on the final dialog, the Oracle Database 11G Express Edition Install Wizard is highlighted in the task bar, as if it is awaiting a response from a prompt. The Oracle Database 11G Express Edition option appears in the Start|Programs with the following sub-options: Backup Database, Restore Database, Start Database, Stop Database, Get Help, Get Started, and Run SQL Command Line.
The Get Started option doesn't seen to do anything. This is the third time I've re-run the setup program, as i thought perhaps the Ad-Aware spyware program was blocking the Finish process.
Any help would be greatly appreciated. Thank you, in advance, for your help.
James

Hello James,
Windows XP professionalI assume you use the 32bit version?
Are you logged in with administrative privileges?
When I press the Finish button on the final dialog, the Oracle Database 11G Express Edition Install Wizard is highlighted in the task bar, as if it is awaiting a response from a prompt.Seems as if it's hanging at that point. Could you check whether the Oracle Services the installer created are up and running? Taking you other comments on "Get Started" into account, I wouldn't think so.
In that case, you should start digging for errors in the log files created during your installation.
-Udo

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Installing Oracle 10g Express Edition on x86_64

Hi,
I tried installing Oracle 10g express edition on Arch Linux X86_64 but could not get it running.
I followed guide here http://alodib.com/?q=node/32.
Installation went well. Then I configured it, apparently went well. But could not get it running.
I have following output
$>sudo /etc/rc.d/oracle-xe restart
:: Stopping Oracle Database [FAIL]
:: Starting Oracle Database [DONE]
$>sudo /etc/rc.d/oracle-xe restart
:: Stopping Oracle Database [FAIL]
:: Starting Oracle Database [DONE]
$>sudo /etc/rc.d/oracle-xe status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 26-DEC-2011 12:58:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 26-DEC-2011 12:17:16
Uptime 0 days 0 hr. 41 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
$> sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 26 13:17:43 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact

1) which Linux(freeware) flavor should I install ?Ordinarily, I'd recommend getting Oracle Linux (http://eDelivery.oracle.com/linux) because the default install includes all the prerequisite RPM packages you will need. And failing that, also offers another RPM package "oracle-validated" which will cause the installation of the necessary prerequisites.
But... you mentioned customer: if this is a revenue-producing situation and customer money is at stake, I strongly recommend they obtain commercial O/S support with either Oracle, Red Hat, or maybe SuSE/Novell. Compared to the cost of a downed business, an O/S support arrangement is cheap, cheap, cheap.
2) is there any virtual enviornment available for Linux Os on which I can install 10g Express Edition database ?Sure. You can run Oracle VirtualBox on most Linux, Windows, or Solaris boxes. http://VirtualBox.org for info.
3) If available, is there any difference in using the Linux Os in Virtual enviornment and actual installing Linux ? will there be any difference in installing database and configuration for both the cases?No real differences in either environment.
4) need download link for latest version of Red Hat Linux setupWhat, you didn't try http://eDelivery.oracle.com/linux yet?

Installing Oracle 11g Express Edition

Hello,
I am a little new to this, but I'm trying to install a local database server onto my laptop to use for my OCA preparations...
I was hoping someone can explain what I'm doing wrong... I'll try and provide as much information as I can.
I downloaded Oracle Database Express Edition 11g Release 2 (http://www.oracle.com/technetwork/database/express-edition/downloads/index.html) and installed it... Unzipped the file to Disk 1 folder and ran setup.exe. Got the prompted and left everything with their default values and the install went fine.
Tried to run the "Get Started With Oracle Database 11g Express Edition" from my desktop and it tries to open up APEX on 127.0.0.1:8080 and that fails (cannot establish a connection).
I tried starting up the database with the command provided in the Oracle Database 11g Express Edition folder and then went to "Run SQL Command Line". Tried to connect to the database with system/<password> and it returns an ORA-01089 error - immediate shutdown in progress.
I have already installed Oracle - OraHome92 in the past for work on the machine as just a client...
Is this simply an issue of restarting the computer to get all of the services working properly?
Do I need to install the full blown 11g database from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html instead?
I just want to be able to create the simple schemas and tables that the textbook says are provided and not do it on the company servers...
Any information or links to getting this set up would be greatly appreciated.
If you need me to provide any more details, I will do my best and give you the information as well...
Thank you very much in advance for your time.
Regards,
Ivan

Hi Ivan,
I think in you're case its better to keep with the Express edition. You could have it on you're notebook everywhere, It's not so heavy and doesn't requires a lot of space, but you still have all the Oracle database behaviour.
Regarding the Apex URL you should put one /apex/ at the end of the URL and then login with admin and password you've entered during installation.
Regarding the error this means that the database is in progress of shutting down. Open command prompt and run adrci (Automatic Diagnostic Repository Command Interface), then type show alert and then select the number 1 (should be something like diag/rdbms/xe/XE). Once the new windows opens up scroll to the bottom and you'll see the last event which occurred in the database.
Either way you could try restarting you're computer and then start the service when it boots up.
Regards,
Sve

Installed Oracle database express edition but not can't access c: drive

Similar Messages

Maybe you are looking for