Installed Photoshop CS3 trial, now previous Photoshop 7 won't work

I've downloaded and installed PS CS3 trial and given it a go but decided to stick with version 7 as it's still doing everything I need.
So when the trial period on CS3 has expired I've uninstalled it but now Photoshop 7 won't run. I get this message a few seconds after I click on the PS icon . ..
"An unexpected and unrecoverable problem has occurred due to a program error. Photoshop will now exit"
I've reinstalled PS7 several times to no avail.
Since I installed the CS3 trial I upgraded from Tiger to Leopard - maybe this is the cause!
Any idea's how I can get PS7 working again?
Cheers
steve

>Since I installed the CS3 trial I upgraded from Tiger to Leopard - maybe this is the cause!
Photoshop 7 will not run under Leopard...

Similar Messages

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • Tried to install yosimete software and now my MAC Pro won't work

    Yosimete software won't install

    Yes I was upgrading from 10.6 to 10.10.
    Says OS X could not be installed on your computer.
    File system verify or repair failed.
    Quit the installer to restart your computer and try again.
    I did all that a couple of times and still won't work.

  • Error message when installing Indesign CS3 trial. I need help ASAP

    I have searched the forums and adobe.com and have tried everything that I saw. None of it worked for me. I have tried and tried to install Indesign CS3 trial. I keep getting the error message: Indesign has encountered a problem and must close.
    I have windows XP and plenty of RAM. What can the problem be? I have done everything I can think of to do. I added more memory and did everything the forums said to try. I really need this for my class. I am getting behind. I cannot afford to buy the program. Please help!!!!!
    Thank you,
    Teddy

    If you scroll down you'll see there's Windows info there, too. Aside from being sure the fonts are activated, you might try renaming the Sing folder, which should be in Program Files\Common\Adobe.
    You could also try Help > Configure Plugins and disable the Sing.apln, but I don't know how you can get there if the program won't start. Maybe going to the Adobe InDesign CS3\Plug-Ins\Text folder and changing the name from SING.apln to SING.bak would do the trick.
    If it's really the SING problem, that ought to fix it, but you won't be able to work with Oriental languages.
    Peter

  • If I Install "Dreamweaver CS3 TRIAL VERSION"

    If I Install "Dreamweaver CS3 TRIAL VERSION" , it will delete
    my current "MX 2004 VERSION" ? When the new Dreamweaver version
    after Dreamweaver CS3 will get/scheduled to come out to the market
    (about) ?

    Thanks for the research!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "David Powers" <[email protected]> wrote in message
    news:fmvket$dar$[email protected]..
    > Murray *ACE* wrote:
    >> Thanks, David. Seemed wrong to me....
    >
    > Somewhere at the back of my mind, I had 27 March 2007
    nagging at me, so I
    > went to the press release section of the Adobe site:
    >
    >
    http://www.adobe.com/aboutadobe/pressroom/pressreleases/200703/032707CreativeSuite.html
    >
    > As you can tell from the 032707 in the URL, Creative
    Suite was launched on
    > 27 March, but... scroll down to the bottom of the press
    release:
    >
    > "Pricing and Availability
    >
    > "Adobe Creative Suite 3 Design Premium and Standard, and
    Adobe Creative
    > Suite 3 Web Premium and Standard will begin shipping in
    April 2007."
    >
    > So it was announced in March, but started shipping
    during the following
    > month.
    >
    > --
    > David Powers, Adobe Community Expert
    > Author, "The Essential Guide to Dreamweaver CS3"
    (friends of ED)
    > Author, "PHP Solutions" (friends of ED)
    >
    http://foundationphp.com/

  • I installed iTunes 10.5.3.3 and now my DVD player won't work.

    I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
    This device cannot start. (Code 10)
    Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
    Any ideas why iTunes renders my DVD drive unusable?  I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
    Why is this happening? 
    Here is my computer information:
    Dell
    Latitude D630
    Intel Core  Duo CPU T770 @2.40 Hz
    4.00 GB RAM
    32-bit Operating System
    Thank you,
    Kelly

    There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

  • I installed mountain lion and now my kodak printer is not working.  Any sugestion please

    i installed mountain lion and now my kodak printer is not working.  Any ideas? please help

    What errors do you see?  The /var/log/cups/error_log file might have some more information.

  • Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

    assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
    so there's a faulty component or connection
    from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

  • I loaded software updates to Settings now my lock button won't work. I was told to do a restore but it keeps timing out. I disabled virus software which didn't help. How do I get it to restore?

    I loaded software updates to Settings and now my lock button won't work. I was told to do a Restore but it keeps timing out. It says it will take 58 minutes to do the restore. I disabled my virus software but that didn't help. Any suggestions so I can do a Restore?

    Try the Manual Install discussed here:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly.  please help.

    I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly.  Please help.

    Remove preferences on Mac OS
    Quit Dreamweaver.
    In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
    Rename the Dreamweaver preferences folder:
    Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
    Navigate to /Users/Your User Name/Library/Preferences.
    Rename the Dreamweaver preferences file:
    Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
    Try to re-create problem
    After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
    Then try to re-create the problem that you had before.
    If the problem was resolved, then damaged preferences was the cause.
    If the problem persists, then the preferences are not the cause and you can replace the original preferences.
    To replace the original preferences:
    Quit dreamweaver.
    Delete the new preferences folder and restore the original name of the previous folder.

  • Had to purchase two OS X system upgrades, new iPhoto etc. just to connect new iPhone 5 and now half my apps won't work. No rosetta and missing lost dogs pics from iCloud...HELP!

    I had to purchase two OS X system upgrades, snow leopard and mountain lion,  just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all  just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!

    File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
    That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
    You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
    It can be reverted to 10.6.8 yourself.
    How to revert your Mac to Snow Leopard
    Most commonly used backup methods

  • HT2486 I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

    I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

    Software Update (under the Apple menu).
    Current Snow Leopard version is 10.6.8.

  • Just upgraded to 10.9. was hoping it would fix the bugs in the last system.  now my Epson scanner won't work.  Downloaded their newest software.  No go with the new OSX. Why would Apple roll out a new free upgrade that interferes with Epson?

    Just downloaded OS 10.9.  hoped it would fix bugs from the last version.  now I can't use my Epson perfection 4870 scanner. Cehcked with Epson. They say the software is an Apple update.  checked with Apple-No Go.
    For now my Scanner just won't work.  I'm surprised Apple would introduce new OS material -free- which compromises a good vendor like Epson.

    nope, Barney.
    My issue is   a large amount of money spent over many years on computers for my company, myself, wife and sons. Got an investment here
    The company I favor, Apple sent me a message that they have a wonderful new Maverick operating system.
    I send documents back and forth to friends and people to do business. Hoped maverick would fix the bugs  from Leopard.
    With Maverick system, my main document sender, Epson perfection 4870 and its software doesn't work anymore, or so it seems to me.
    Checked with Apple, very apologetic, they can't help, maybe it will be fixed in a couple of days...
    Epson, referred me to Apple...
    I still ccouldn't send documents.
    Until my buddy Macjack pointed out the obvious- Image capture does the job. Thanks very much,MJ
    I didn't know that- not in the Apple help area, can't find it in their manual, their help line couldn't give me a clue to something as obvious as this
    So, lot of money over the years. Plenty of smart, well compensated folks writin code at both companies.  I can't keep up with tit all, they don't keep up with each other.
    Bottom line Apple releases a product  that doesn't work well for a lot of little people like me.  Maybe some clear expanation would help re:Macjack..
    I certainly don't understand all the ins and outs of a zillion dollar computer behemoth business model.  Do know this though, If I ran my business like this customers would go somewhere else and some would probably sue me.
    Thank you

  • I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.

  • I have a G5 Power Mac with dual 1.8 processors. I recently upgraded the software fro 10.4.11 to 10.5.8 in order to get an iPad 2. Now my Adobe Photoshop 7 won't work any longer. All the newer Phtoshop versions only work with Intell processors. Does anyone

    ..know of an older Photoshop version that will work with my processors and system 10.5.8?
    Thanks,
    Don

    I believe I had this issue with PS7 when I first upgraded from OS 9 to OS X 10.2 Jaguar.
    Couldn't get PS 7 to launch at all.
    I ended up having to update all of my Adobe apps to the CS edition to be sure every Adobe app functioned without a hitch.
    I am not sure where you'll find older versions of Adobe software, though.
    You could try and contact Adobe direct to see if they have any older versions on disc left in stock or not.
    Short or that I  really do not know.
    PS CS 4 was the last universal version that works with PPC Macs.
    Pixelmator used to be available for 10.5 Leopard, but it's no longer available for PPC Macs, either.
    http://www.pixelmator.com/
    Could contact them to see if they have the older version still available on disc or as a download.
    This is a pay app, also.
    Another pay app that may work for you is Graphic Converter.
    http://www.lemkesoft.com/
    The other options are the ones already mentioned in the previous reply.
    Other than Pixelmator, the other offerings are quite limited compared to PS.
    Here's the link to Seashore.
    http://seashore.sourceforge.net/The_Seashore_Project/About.html
    A free open source Unix replacement for PS is The Gimp
    http://www.gimp.org/macintosh/
    You need to install X11 in order to use this app.
    If you installed 10.5, you'll need to check your Applications folder to see if X11 was installed by default.
    If not you'll need to go back to your OS X 10.5 install discs and do a custom install and just install X11 from disc.
    This will just add the additional program and extensions and will not erase your installation of OS X 10.5.

Maybe you are looking for