Installed software it response and feeds but prints nothing

installed software it response and feeds but prints nothing

Which updates were done?
Have you checked and made sure your permissions are correct? This is done with Disk Utility, which is found in the Utility folder in Applications. At the same time Verify the drive, as an added measure.
Also try deleting the following preference file com.apple.systempreferences.plist
It will be replaced by the system when necessary.
If it still is not correct, I would down load the 10.4.11 combo update, repair permissions again, then install the combo update.

Similar Messages

Installing software for a new HP 5530 printer, the utility quit, Apple notified. What now?

I have Yosemite on my iMac and was installing software for a new HP 5530 printer. Message says Utility quit unexpectedly. Apple has been Notified. What do I do now?

Thanks you all so much. It's great to know there are people interested in being helpful and sharing their knowledge. Turned out that some scanner functions worked, but scan to computer did not.The installation of the HP Utility was somehow originally messed up, and what it took was a brief UNPLUG of my iMac (restart or shutdown did not do it), followed by uninstall and reinstall. HP actually called me today after a chat session was cut off yesterday and asked if I would like to continue! Good help on both sides.

Installing software is happen and reboot nearly one day after system recovery.

HP installing software is happen and reboot nearly one day after system recovery.
I have done the recovery for my lap
1)After recovery done system get reboot and hp software installation menu has came.
2)HP software get installed , and then rebooot.
3)This HP software installation menu is come and reboot the pc and again it come. it doesn't finish
this is running more than 24 hrs.
4)please guide to resolve the issue.
System Model: HP Pavilion dv5 Notebook PC
Operating system: Windows Vista Home Premium
Please use the link to download the video of my problem, which used understand the issue:
https://www.dropbox.com/s/bf7e08lmdrn32t1/HPSoftwareInstall-1.rar
https://www.dropbox.com/s/4k4rug8pvs3w6qu/HPSoftwareInstall-2.rar

Satellite C75D-A7370
ordered recovery media from Toshiba and installed it. .... I tried to call Toshiba support, but because I am outside my warranty, I was told I would be charged for support.
It is running Windows 8..even though it is supposed to be on 8.1 (according to the sticker on the bottom of the laptop).
The product key is buried in the hardware.
According to the spec above, the original model shipped with Windows 8 and needed to be upgraded. My guess is that they later shipped the same model with Windows 8.1.
It appears Toshiba shipped the wrong recovery media.
Explain that when you call.

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?

Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work.

Did a new install of Windows 7 and Adobe, but CS won't activate.

Have Adobe Creative Sweet Premium from a couple years ago. Did a new install of Windows 7 and Adobe, but CS won't activate. Probably did not de-activate the old product. I paid for it though and have the install disks and serial numbers.
The adobe.com/go/activate website is less useful. Been on live chat for 20 min. It says an agent is available but no one responds. Help?

Mylenium,
That was a good start. Need one more helpful hint. I just found the Adobe DVDs. It is actually Creative Suite 5 Design Standard. It would be nice to put on a box without a DVD player. Can you please provide me with a download link for CS5 DS?
I think if I can download it I can handle validating it from there. Thank you!

Im trying to download cod 4 and it says give password for billing info which i do and submit but then nothing happens

im trying to download cod 4 and it says give password for billing info which i do and submit but then nothing happens

Did you provide a credit card?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
 Cheers, Tom

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I n

My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!

What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer?

Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help!

Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....

I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing

Why I can not change the brightness of the screen 27-inch cinema display. I pulse the f1 and f2 but does nothing.

Why I can not change the brightness of the screen 27-inch cinema display.
I pulse the f1 and f2 but does nothing.

Look in System Preferences > Displays
See if the brightness is locked.

HT1918 i have a problen on my apple id, i forgot my security question and i try to re-send it to my Emil but i got nothing i look at everywhere on junk, and pop but also nothing !! what i have to do ?

i have a problen on my apple id, i forgot my security question and i try to re-send it to my Emil but i got nothing i look at everywhere on junk, and pop but also nothing !! what i have to do ?

Having an Apple TV has absolutely nothing to do with the iPhone or syncing issues with an iPhone.
How much free space is on the iPhone. What does it actually say in iTunes on the Summary tab?
What is selected to sync?
Have you tried selecting a single song or album to sync? If so, does that sync?

I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8. After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED. What can I do to fix this?

I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.

Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

Installed Ghostscript 8.70 and now cannot print

I installed (via download and then make install) Ghostscript 8.70. After this, my printer driver to my KonicaMinolta Magicolor 2530DL would crash, generating an "Empty print file!" error when running lpstat -p (and causing the printer to get "pause"d. "Resume"ing the printer would cause it to get paused again immediately when the printer driver would crash again. I tried to then install Ghostscript 8.61 and then 8.64, but now I get "Copying Print Data..." and the job stays active forever. I know that CUPS uses Ghostscript. Is there a version of ghostscript that I can install that will restore my 10.6 system to where it was before I apparently overwrote a good ghostscript install with 8.70? I would have to restore my macbook to 10.5 and then upgrade to 10.6 to get it restored, which would take a lot of time. Does anyone know what version of ghostscript is used in 10.6.2 snow leopard? I have CUPS 1.4.2 on the macbook.

I've been using the 10.5 driver for the 2430DL. It has worked just fine for 10.6 and 10.5.
Have you tried the 10.6 driver for the 2430DL in Snow Leopard?
Its rastertokm2430dl driver must call ghostscript, because that's when the trouble started. The crashreporter would report a crash when 8.70 was installed. The error changed when 8.64 was installed. When I look in /usr/libexec/cups/filter directory, all files were updated Dec 30th, 2009.
As I mentioned in my first reply, certain applications that send PostScript output to the printing system (almost all applications send PDF to the printing system) may use Ghostscript instead of the pstops filter Apple supplies. Ghostscript is not a requirement of the 2430DL driver on Mac OS X and Ghostscript is not a requirement for CUPS on Mac OS X.
What happens if you uninstall Ghostscript? I downloaded and installed the 10.6 driver for the 2430DL and set up a printer to print-to-file. I printed a PDF from Preview. My installed version of Ghostscript was not called during the printing process.
And is there a way to see what libraries are used (similar to ldd) for the driver?
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">otool -L /path/to/file</pre>
For the 10.6 driver for the 2430 this produces
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">$ otool -L /Library/Printers/KONICAMINOLTA/mc2430DL/Filter/rastertokm2430dl.app/Contents/M acOS/rastertokm2430dl
/Library/Printers/KONICAMINOLTA/mc2430DL/Filter/rastertokm2430dl.app/Contents/Ma cOS/rastertokm2430dl:
/usr/lib/libcups.2.dylib (compatibility version 2.0.0, current version 2.8.0)
/usr/lib/libcupsimage.2.dylib (compatibility version 2.0.0, current version 2.3.0)
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services (compatibility version 1.0.0, current version 34.0.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 111.1.4)
/System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices (compatibility version 1.0.0, current version 32.0.0)
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 476.18.0)
</pre>
I would suggest that you update to the newer 2430DL driver and remove Ghostscript. Then see if you have the same problems.
Matt

Just installed Mavericks for mac and can't print accurately.

I just installed Mavericks 10.9 on my iMac and now the printer colors are totally wrong as in not in the image!! I did contact Epson ( I have an Epson WF 3540) and we updated the driver. They said the problem is with the applications, ie. Photoshop and/or iPhoto. I did run the necessary utilities re ink and print head cleaning. Any suggestions?

Yes, I seem to have solved my initial problem but found another, I
can't to set the paper size. I often use the Custom Paper Size
dialogue. I'll keep updating my drivers and hope for the best. Epson
must be getting bombarded with complaints. Thank you for your help.
Mary Ellen

Still installing software update after12hours and cannot reboot?

New i mac. Installing software update for 12 hours. Cannot turn off or reboot or do anything.

Hold down the power button on the back until it shuts down. Repeat and let it start up. Then, try the update.

HT201465 I have installed software for a HP Deskjet 1510 printer but it will not print

I have OS X Yosemite 10.10.3 and I just purchased a HP Deskjet 1510 all-in-one printer. I have installed the software and my computer is picking up the printer but it will not print. I have restarted the computer and it still will not print.

Hello jamesettafromfl,
If you continue to have issues setting up your new printer in Yosemite, you may find the information and troubleshooting steps outlined in the following articles helpful:
OS X Yosemite: Add or remove a printer
OS X Yosemite: Printing troubleshooting
Sincerely,
- Brenden

Installed software it response and feeds but prints nothing

Similar Messages

Maybe you are looking for