Installed windows 8.

I upgraded to windows 8 and now I can't even download adobe story. I uninstalled Air and reinstalled. What should I do?

Hi,
As of CS6/may 2012 the desktop app is a paid app. Although it was still accessible to users who were working on it in offline mode. Since you have upgraded your OS your story desktop data would have got deleted too so as a free user you will not be able to continue working in desktop mode. You can still work in the browser app though.
In case you did backup your story data before upgrading we can help you retrieve it.
Sandeep

Similar Messages

Cannot install windows 8.1 on imac 5k - apple support says "Correct, that machine can't install windows" Boot camp fail

I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MC

Michael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)?

Install Windows 8.1 Pro on Mac Mini Late 2014

I'm trying to install Bootcamp on my Mac Mini. Windows reports that it cannot install or create a partition on the drive after formatting the BOOTCAMP partition as NTFS.
This is my setup:
1. Mac Mini Late 2014 with 2TB Fusion Drive.
2. Windows 8.1 Pro x64 full version ISO downloaded from Microsoft Store.
3. Sandisk Extreme Flash Drive (I have tried both 16GB and 64GB).
4. Bootcamp partition = 500GB.
5. Other USB devices plugged in: Corded USB Mouse and Apple Extended Keyboard (both of which are required to enter the serial number and navigate the installer window).
6. No additional storage devices of any kind are connected aside from the internal Fusion drive and the installer drive.
7. Booting from the EFI portion of the Bootcamp created Windows installer.
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
If you have any other tips, please let me know.
I have installed or helped other people install bootcamp many times over the course of the past 2 years. Every single time it has caused endless headaches and literally weeks of wasted time.
I have read endless posts on what is causing these problems. I will consider summarising these for anyone else having the same problems. Everyone has their theory so far about this Bootcamp nightmare, but so far there doesn't appear to be any one magic solution.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
If you have any better idea, please let me know.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
Cheers,
Paul

Paul@Sydney wrote:
7. Booting from the EFI portion of the Bootcamp created Windows installer.
The FAT32/NTFS partition is usually not adequate for an EFI install. You can delete the BCA-created partition and create a Disk Utility partition which is formatted as Free Space. This will be split into an MSR and MSD. Fusion drives create problems, especially if the BC partition lies outside the traditional MBR 2TB boundary.
Before you delete the BCA-created partition, please post the output of
diskutil list
diskutil cs list
sudo gpt -vv -r show /dev/disk0
sudo gpt -vv -r show /dev/disk1
I have read that I should try using a USB 2 flash drive rather than a USB 3 flash drive, so I will try that next. I fail to understand how this could make any difference.
Windows installers up to W8.1 do not have USB3 drivers. These are installed after Windows is installed and BC drivers are in place.
Apple's inability to address the issue suggests that the problem may be with the Windows installer. Perhaps Microsoft is deliberately causing this?
The requirements are pretty strict when installing Windows. Any deviations cause headaches and grief.
I suspect the two most likely causes of these issues are the downloaded ISO or the Thumb Drive.
The USB is usually the issue.
On another topic, how to I rename the NTFS partition back to BOOTCAMP? All options to rename this partition are greyed out in Disk Utility...
After Windows is fully installed and BC drivers are in place, log into Windows, right click on it and rename it on the Windows side. It cannot be renamed on the OSX side with diskutil renameVolume. Here is an example sequence. You cannot rename volume during the installation process.

How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

I have a 2010 Mac Mini server running 10.8.4 (12E55). I just bought a brand new copy of Windows 8 from micrsoft. I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5. I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support). I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition. I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS.
Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book. If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer. Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up.
Now I just put the DVD that they made me in my macbook and it shows up as bootable disc. But the USB doesn't. (1 hour later) I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

mikkel-kj wrote:
These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
Mikkel
Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

I installed windows 7 recently and also Adobre reader XI, and now I cannot open any of my previously created pdfs. Every time I get the message: Error opening the file. Access denied. What is going on?

Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
Can some one please help me out?? I really need to work on many of this files ASAP.
Thank you all in advance for you attention,
Best,
Henrique

Can you start Adobe Reader?

How to install Windows 8 on Mid 09 Macbook Pro (10.8.3)

So i loved the new Windows 8, and even had it installed before bootcamp supported windows 8 on my new iMac, i waited to buy a bigger hard drive and more ram for my mid 09 Macbook Pro. The day i bought the new hardware, Apple released 10.8.3, and an updated bootcamp to support Windows 8! Yay! I got my install disc out (iso file burned to DVD), opened up bootcamp assistant, only to get an error saying apple dropped support for my mid 09 Macbook Pro and Windows 8. Making the install impossible through bootcamp. Do not fret, i have the solution, and EVERYTHING works perfectly. Here we go.
Gather your Windows 8 install disc AND a Windows 7 install disc (you can surely find one by searching the net, use your old one, or borrow a colleagues... we are licensing Windows 8, NOT 7, this is just for my trick to fool bootcamp assistant and no i do not condone piracy)
Inside BootCamp Assistant, the driver download may hang,it did for me, twice..could be heavy usage due to the popular new update...so i recommend downloading it faster, and manually here http://support.apple.com/downloads/#macoscomponents and get 4.1.4586 yes this is for windows 7, ALSO while you are there, download the windows 8 support pack 5.0.5033, as we will need that later as well. As a matter of fact, DO IT THIS WAY and dont bother
That being said and done, in BootCamp Assistant (OSX), only check off Install Windows 7, leaving the download support software unchecked
Partition your hard drive as youd like, this splits up your storage space however you like, keep in mind which OS you plan to run the most, and obviously give that one more room, i.e you do all your Photoshop work, and app development in OSX, and only use Windows for office stuff, you'd want to give yourself more room on the OSX side. I however bought a huge new internal drive to split them basically in half, as i use them both frequently.
This step is where the trick comes. OSX 10.8.3 / BootCamp will advise you there is no support for Windows 8..only 7 with your Mid 09 Macbook Pro if you have put your Windows 8 disc in, upsetting you as it did me...possibly bringing you to this post, thats not FAIR is it? Your 09 MacBook Pro is still JUST AS GOOD as a lot of PC's running Windows 8, why they excluded this model i have no idea...im sure they had reasons, but i dont care at the moment..lol
INSTEAD place a Windows 7 install disc in, and click next. BootCamp Assistant will now partition your drive, make the windows side bootable and restart your MBP.
Let it do its thing, and eventually you will land at the Windows 7 installation interface. We don't really want that, we want Windows 8 right?
Click the "x" to close the installation for Windows 7, it threatens your MBP will restart, and allow it to do so.
**IMPORTANT** Once you hear the beloved Mac chime, quickly press and hold the "option" key.
This brings you to an area where you can select a startup disk. At this point, lets get rid of the trick. Hit your eject button and get rid of the Windows 7 install disc, we are done with it now.
You now, well in my case anyway, should only see your Mac HD, and the Recovery Disk.
Insert your Windows 8 install disc
Now WAIT. Eventually, you should see a new DVD looking icon that says Windows pop up next to the MacHD and Recovery Disk. (depending on what you called your iso, it may something else...not sure, but you cant miss the new entry)
This is where a wired mouse will be needed, or use tab/space/enter to navigate to the new Windows Disc icon and launch it.
You are now in Windows 8's installation interface, cool!
Follow the steps until it asks you where you want to install it. You should see a partition about equal to what you set earlier in BootCamp Assistant, and it SHOULD say Bootcamp right on it. Select this partition. (mine was the last one, the fourth i believe)
OH NO, it says you cant install it to that partition, this is normal. You need to highlight/select this partition, and click format. I cant remember, but i think you have to click "options" to get to a the spot where you can format it. Pretty straight forward. Safety check, obviously make sure you have the Bootcamp partition selected, dont format your Mac OSX partition!
After the quick format is done, Windows 8 installer will then allow you to click "next" and from there the magic happens.
Go through the whole Windows 8 install, and setup how you would like, this takes awhile, and im not covering that, as its a hand in hand walkthrough like any other install.
Once your inside your new Windows 8, you'll see a bunch of things not working, like tap to click on your trackpad, no on screen displays for brigtness, volume, and possibly other stuff. Not cool right?
Grab your USB stick, or Burnt disc that you applied the bootcamp support downloads to in the begining of this tutorial.
FIRST open the Windows 7 Bootcamp install, 4.1.4586, open the folder and find setup.exe and run it (we are in windows 8 now)
It takes a while, but Apple's BootCamp will install a bunch of drivers, etc, and eventually restart your MBP, which is cool, let it do it.
Upon finishing, lets go back to the USB/Burnt Disc where all your support software was saved, and lets get the newly support BootCamp 5.0.5033 opened up.
Big Thanks to a post by ErikVanD i seen on this forum for the next step.
If you want, try and click setup in this latest BootCamp support set, and you will get another sad error claiming x64 is not supported, something awful to that nature. Awww man, this far, only to get let down. Nope. We are going to fix that. And this is where ErikVanD's post pointed me to what we do next.
It was said to navigate in the BootCamp 5.0.5033 folder to something of the effect of BootCamp/Drivers/Apple and run the MSI file "BootCamp" (MSI file will say Windows Installer in its description, and not necessarily MSI for anyone not too savy with Windows) **note - NOT .bootcamp (notice the period in the front) and it should work and install the new Windows 8 support for your MBP...but in my case it didn't, which is why im posting how i fixed this. Your setup may somehow be different, but mine gave me an error say it "needs elevated permissions to run, use setup.exe instead. We tried that remember! And it gave us the x64 not supported error. Oh man! Blabbing aside, this file needs to be ran as an administrator, which yeah your the only user, but Windows is funny like that. Normally youd just right click, and select run as administrator, but out the box, that option isnt there when you right click, only install, repair, open with etc. Here's the next trick, you need to add a registry file to enable running as an administrator, dont be afraid, this is an old trick, and really easy.
Open notepad in Windows, and create a new doc, call it Add_MSI_run_as_administrator.reg
Paste this following code into the new doc
Windows Registry Editor Version 5.00
HKEY_CLASSES_ROOT\Msi.Package\Shell\runas] "HasLUAShield"="" [HKEY_CLASSES_ROOT\Msi.Package\shell\runas\Command] @=hex(2):22,00,25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,\    00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,6d,00,\   73,00,69,00,65,00,78,00,65,00,63,00,2e,00,65,00,78,00,65,00,22,00,20,00,2f,\   00,69,00,20,00,22,00,25,00,31,00,22,00,20,00,25,00,2a,00,00,00
Or download the file already made from my company server at http://www.theprojectdev.com/public/pub.html **i put this there as a courtesy to help others like me, its just a complete reg file, so either create your own through copy and pasting above or download it. Either way, put it on your desktop.
Now double click the new registry file, and allow/ok it to do its thing.
Once done, you can discard the file from your desktop, or keep, your choice.
Guess What!? Now we can do the impossible! Lets revisit that solution from before by going to the newest BootCamp 5.0.5033, and navigate to BootCamp/drivers/Apple and select that tricky BootCamp MSI file that wouldnt allow us to run, this time RIGHT CLICK it. Because of our new registry entry we placed, we now have an option to "Run as Administrator" Click that option.
WooHoo! We have done what coudnt be done, BootCamp will now walk you through the installer, and add all the great support for Windows 8 on your mid 09 Macbook Pro that they for some reason neglected!
After the update, you will endure yet another restart. From there, most likely using a wired mouse still, navigate to the system tray icon on the bottom right corner of the screen (little up arrow) and click it. It will pop up a little menu, showing system processes/stuff running, click the gray squared diamond (this is bootcamp) and it will bring up the newest BootCamp control panel. From here, you can nav to trackpad/touchpad and set tap to click (finally) and gestures, etc. This control panel has lots of good stuff to make a MBP user feel comfortable in Windows 8. There you go! You did it!
I really, sincerely hope this helps someone, as it really made my day to get this resolved. I want to add that all On Screen Displays will work (your volume/brightness etc) they keyboard backlighting, and so much more, it really works great. I upgraded my hard drive to 1tb, and installed 8gb of PNY RAM from best buy ($40) and it runs Windows 8, AND OSX fantastically.
My company http://www.theprojectdev.com designs and develops mobile apps (iOS and Android) and web design and development, so im a heavy user of both OS's, and this setup is just the best thing that has happened to me in a portable sense. Runs so so so fast! Enjoy everyone!

**********************IMPORTANT EDIT TO THE TUTORIAL***********************************************************
Everyone im sorry, i made a mistake informing you which BootCamp support drivers to download from Apple. You see I originally downloaded my Windows 7 Support from the BootCamp Assistant, and had the version number completely wrong.
The first BootCamp install packahe you should down load from http://support.apple.com/downloads/#macoscomponents is actually 4.0.4033
That will be your first BootCamp installation in Windows 8 that works. Im so sorry Markeez for wasting your time, my excitement had blinded me last night.
Also be sure to copy both 4.0.4033's folder and the latest 5.0.5033 folders to your Windows 8 desktop as well, dont run them off your USB stick or DVD/C, whatever media you copied them to.
So Markeez, after you download the correct Windows 7 Support Software 4.0.4033, simply click setup.exe and it will run without any trouble.
Then after the inital BootCamp install is complete, your MBP restarted and all is done, you need to perform the "Run as Administrator" trick i posted above. Its real easy. Open notepad, and copy the EXACT code i posted in the tutorial in a fresh new doc, and save the file to your desktop EXACTLY how i posted it Add_MSI_Run_as_administrator.reg
Now close notepad, and double click the newly created registry file, and allow it access to do what it needs. What this does is allows your run the new installer in BootCamp 5.0.5033 as an administrator, which you wont have the option to unless you use this registry file.
Ok after the registry part is done, go inside the latest BootCamp 5.0.5033 folder, to BootCamp/drivers/Apple and find BootCamp --- probanly the ottom most MSI file, and again it will not say MSI on the right side, it will say Windows Installer or something to that degree. Also do NOT confuse it with a similar file in that folder called .bootcamp this is not the one we need.   OK, so now, using a WIRED MOUSE, right click the BootCamp MSI file, and you will now have the option to Run As Administrator, if you did the registry bit. IF YOU DIDNT do the registry bit, you will only see Install, Repair, Uninstall etc. If thats the case, just download the zip from my company site, it contains only a completed copy of that reg file.
Running this file in the Apple folder as an admin is the key to making this work, let me know if you have any further issues, im watching. Also i apologize everyone, but for some reason i cant edit the tutorial to fix my mistake, very sorry about the confusion.

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

Failing to install windows 8.1/7/ any kind of windows on my imac,seeking help foreal

Hey there. It's going to be a long post since I've messed with it for 4 days, and still no success even in the time I'm currently writing this message - the furthest I got is having tons of crashes and black screens. And now I can't even reclaim my lost harddrive space (resizing partitions doesn't work anymore).
I'll start with that I already tried to make Bootcamp work about a year ago, but then quit it out of no success and reverted all the changes. But this time my situation is different - I'm pretty sure something messed up in the middle and now I'm seeking help and answers to my questions. And here we go - one bright day I decided to install Windows 8.1 as a secondary boot system on my iMac for personal reasons. I went and added Bootcamp's ability to make a bootable USB on my mac by changing the plist file, and finally had the option to do so. Then got an ISO of Windows 8.1's installation, burned it to a DVD with disk utility (on the lowest speed) and here's already where my problems started. The disk failed to burn for some unknown reason, even though when I compared the contents it had the exactly same thing in both the ISO and the DVD. Weird isn't it? I still tried to boot it - and guess what? the DVD booted but it had the non-EFI interface (huge and pixelated). Anyway when I pressed next I had some weird driver errors, so I decided to use an USB instead (1 DVD wasted so far). I used Bootcamp to create a bootable USB with drivers and went to boot it. The USB booted perfectly fine under the name "EFI Boot" and then I reached the partitions screen.. Obviously I had weird errors again (GPT/MBR stuff). One tutorial on the web suggested creating a partition for the windows rather than using the Bootcamp pre-made one. I followed it by booting my main system, and using disk utility to delete the Bootcamp partition. Later on I booted again to the installation and created a new partition from the partitions screen. Windows created two partitions - a Microsoft reserved partition, and the secondary partition which is used for the windows files. After some time the windows finally booted for the first time. It took pretty long but went smooth - until it finally booted. Since here the problems returned - the Windows crashed every 5 minutes from a driver error (that's AFTER I installed the Apple drivers right after the system finished booting), I googled it and followed various tuts but it still wasn't fixed. I decided to quit using 8 since I liked 7 more anyway (I currently have it installed as a virtual system in Parallels), so I decided to install 7 instead of 8 since I never had any issues with it. Booted up my main system again - went to Bootcamp Assistant, USB creation. ISO file + drivers on the USB. I reboot. Holding ALT and... my mac can't even see the USB drive! Luckily I had 4 more installations (various ISOs) of Win 7, so I decided to try them. I tried ALL the Installations I in none of them my mac could see the USB drive (I wonder how my USB survived all this rewriting on it...) Again to Google we go. I researched a bit and realized that I'm missing a file called xboot64.efi in the "efi/boot" folder, which can be taken from windows. I tried extracting it from install.wim but none of my archiving apps could open it (I tried Unarchiver, Keka, 7zX, terminal's unrar command and more, none could!). I also realized my Win 8 installation had this file so I added it to the Win 7 USB. Now my mac could see the USB in the boot screen - and it booted. I saw the "loading files" screen, and after one minute of it... black screen. I waited 10 minutes. Then 30. An hour. Still a pure black screen. I thought something is wrong with my file, and read that this file is also found in an already installed Win 7, so I went to parallels and took it from here, then added it to my installation. Again my mac could see the USB, but still no luck. When I pressed enter to boot from it, nothing happened as if the boot screen was stuck - the drive was selected but it didn't do anything. I waited long time again and decided to stop waiting. I tried to burn another DVD, this time with Titanium Toast. Again the DVD failed to burn, and when I checked the content, it was the same as the ISO I tried to burn from (official ISO from Microsoft of Windows 7 Ultimate SP1). I went and booted it - this time I saw again "Windows" and "EFI Boot"in the boot screen, both with a disc icon. "EFI Boot" didn't load like the usb previously (loads forever), so I booted the "Windows" thing. The setup loaded, and finally I could see the installation window. Reached the partitions screen... and here the problems returned once again. An error along the lines of that Windows can't be installed on a GPT partition. Some tuts on YouTube and in Google suggested to simply format the problematic partition. And so I did - yet the problem wasn't fixed. After messing with all that for one more day - trying different installations, ways to boot the USB and DVDs, formatting the Windows partition etc, I decided it's time to stop messing with it since luck definitely isn't in my side when it comes to Bootcamp (and for the record, I never had any issues with OSX, but when I tried adding windows to it.. eh, you can guess.) I booted back to my normal system, and went to disk utility to delete the partitions. The Windows partition was deleted easily, but the Microsoft reserved one.. not so quite. (by the way when I boot into it I get a Win 8.1 error screen that tells me to repair the system, since I formatted the Win partition itself). Until this very moment I still can't delete the reserved partition and return my beloved 30gb that I lost because of the resizing (I can't resize my Mac HD partition).
I'm really desperate now. I tried everything and the furthest I got is getting a broken Windows 8.1 (which I deleted later), destroying 5 DVDs, shortening the lifespan of my USB drive, and googling errors the whole day for 4 days in a row. And now I can't even return my lost 30gb even after I decided to quit it. Please help or suggest me what to do, whether it's about how to successfully install Win 7 or to return my lost gigabytes, any kind of help is appreciated. If you managed to read so far, thank you for reading my post and I hope you'll be able to assist me and get me out of this situation.

Read the Boot Camp Help first. Boot Camp does not yet support Windows 8.1 http://windows.microsoft.com/en-US/windows-8/system-requirements. If you insist on installing 8.1 use a virtual machine like parallels, Fusion, or VirtualBox.
http://www.apple.com/support/bootcamp/

Data error (cyclic redundancy check) when installing windows xp..

hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!

I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?

How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)

This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 4   Checksum: 03    Passed
        MBR Sector 3 Index: 5   Checksum: FD    Passed
        MBR Sector 4 Index: 6   Checksum: 58    Passed
        MBR Sector 5 Index: 7   Checksum: 96    Passed
        MBR Sector 6 Index: 8   Checksum: 7F    Passed
        Data Sector Index: 3   Checksum: F1    Passed
        Original MBR Index: 2   Checksum: BD    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 1        Alt Boot Partition (0-3): 1
        Boot Config: 2 (Service Partition containing two Service OS's)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   239 255 255           63    301296177
1   0x00   0x12      0 193 255   239 255 255    301296240     11279520
2   0x00   0x00      0   0   0     0   0   0            0            0
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...

Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
        MBR Sector 1 Index: 1   Checksum: 00    Disabled
        MBR Sector 2 Index: 11 Checksum: 03    Passed
        MBR Sector 3 Index: 12 Checksum: FD    Passed
        MBR Sector 4 Index: 13 Checksum: 58    Passed
        MBR Sector 5 Index: 14 Checksum: 96    Passed
        MBR Sector 6 Index: 15 Checksum: 7F    Passed
        Data Sector Index: 10 Checksum: 01    Passed
        Original MBR Index: 9   Checksum: 12    Passed
        No Patch Sectors
        Checksum Byte: 00
        Think Flag: 1
        WinPE Partition (0-3): 2        Alt Boot Partition (0-3): 2
        Boot Config: 0 (Service Partition containing one Service OS)
        Boot State: 0                   Alt Boot Flag: 0
        (Normal booting operation, will boot to Customer OS)
        RRU: 00000000 00000000          Prev Active Part: 255
        Previous Partition Type: FF     Patch IN: 0     OUT: 0
        CIRT Disabled
        TOC: 0000000000000000           Lock: 0
        Show Error: 0                   Halt on Error: 0
        CIRT Load Return: 0
        CIRT Execute Return: 0
        Pause Duration: 10              Scan Code: 0085
        F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
        Check Msg: There has been a signature failure
# active type      start CHS      end CHS      startLBA       size
0   0x80   0x07      1   1   0   254 255 255           63    109675692
1   0x00   0x07    239 255 255   239 255 255    109676544    191619072
2   0x00   0x12    239 255 255   239 255 255    301296240     11279520
3   0x00   0x00      0   0   0     0   0   0            0            0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done!

Installing Windows 7 (64 bit) in MacPro 2.6Ghz Intel Xeon - Impossible?

There is a list of machines on which Bootcamp apparently does not suport Windows 7 - and lucky me, having purchased my copy of 'ultimate' it looks as if mine is one of them.
http://support.apple.com/kb/HT3986
According to the list "*Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)* " is not supported - now mine is mid 2007, not 2006, but it isn't clear whatis meant there - but I'm thinking it probably means from mid 2006 until the end of production of the 2.66Ghz Intel Xeon Dual-core model. Correct?
But, has anyone managed to get Windows 7 onto one of these, with or without BootCamp - if so, how?
When I use bootcamp, put the 64 bit disc in the drive, it then gets as far as trying to boot from the DVD, and gives a message:
1
2
*Select CD-ROM Boot Type:_*
at this point the keyboard (as supplied with the Mac Pro, apparently important) does not work, nor does a PC format keyboard, so there is apparently no way to select an option, and I wouldn't know which of 1 or 2 was the correct boot type anyhow. The disk sticks and can only be ejected by pulling it out of the casework and pressing the usually concealed button on the drive.
Any pearls of wisdom gratefully received - or do I need a newer Mac Pro for W7?
Thanks. Stephen.

I'm experiencing exactly the same. Found some articles about re-burning the DVD but it hasn't helped.
My suspicion is that the BIOS (or mac equivalent) does not support booting 64bit OS. I remember trying to force OSX Leopard to boot 64bit and it wouldn't work. I can't recall the exact issue, but I suspect its similar.
I am installing Windows 7 Ultimate x64 in a Fusion VM - but not bootcamp - just a regular old VM. So far that is fine. Its not done yet but it is loading.
It may be as simple as a BIOS update - but as far as I know - there are none for my Xeon 3GhZ based system.
oh well.

Install Windows 8.1 on iMac running Mavericks

Hello everybody,
I have a problem with my iMac 21.5 late 2012 running Mavericks. I wanted to install Windows 8.1 on a partition of the Mac, and therefore I bought the DVD from Microsoft and started Boot Camp. I followed the whole procedure, saved the support software on a 16gb flash drive, and all seemed to be going on fine, up to when I discovered I wasn't able to use my Apple Magic Mouse and Keyboard to finish configuring Windows (I mean, from where it asks you to enter a PC name and set the color of the system). I repeated the whole process again and again, but I always get stuck at the same point... Any suggestion?
Thank you very much in advance for your help

Windows will not boot from USB if the Mac has an internal optical drive. This is something that Microsoft implemented.

Install Windows 8.1 BootCamp drivers on old MacBook (Late 2008)

Here is how I installed BootCamp drivers for 8.1 on my old MakBook (Late 2008):
Download Boot Camp 4.0.4033 (Drivers for old MacBook is in this version)
Install Windows 7, then WIndows 8.1 (There are other threads on how to do that).
After Windows 8.1 installed, try to install Boot Camp 4.0.4033 again !!! (Reason: Only this version has the drivers for old Mac like mine)
Download and install InstEd on Windows 8: http://www.instedit.com/download.html. You need this to modify the BootCamp 4 MSI installer to allow you to run it
Run InstEd, click File > Open, browse to your <BootCamp_4.0.4033>\BootCamp\Drivers\Apple folder and choose BootCamp64.msi.
Click LaunchCondition on the left-hand list.
Select all the rows then right click Delete Rows. (Take a look, you will find thses are the messages you saw when you could not run the installer)
Save the file with a new name (I used bootcamp4.msi) and quit InstEd.
Now, you can install the BootCamp 4 drivers on your Mac, by click the Setup.exe (Yes, this will also instll TrackPad driver for old Mac)
The BootCamp 4 service application itself is not compatible with Windows 8.1, (not the drivers). So just download BootCamp 5.1.5621, and install it (Tip: InstEd).
After restart, click the BootCamp icon in the system tray. Set up TrackPad, Keyboad, etc. (How is this possible? Because the drivers were installed by BootCamp 4.0.4033.)
Unstall InstEd, if you want.
Enjoy!

And I used this method:
1. Install Windows 8.1
2. Download BootCamp 5 and unzip to folder BootCamp5 of a USB drive
3. Start CMD as Administrator
4. Install BootCamp 5 by entering the following commands
D: (Assuming the USB drive is assigned to letter D
CD BootCamp5\BootCamp\Drivers\Apple
BootCamp.msi
No need for InstEd might be considered by some as even more elegant as bezodziu's method

Install windows 8.1 in 10.9 Mac Pro Mid 2013

Hey guys I am trying to install windows 8.1 using ISO in CD ROM, boot camp says "Windows 8.1 cant be installed".
Here is the info.pst. A post said to change the msb to one lower mode where windows 8.1 is but there is no windows 8.1 only windows 7. Win7OnlyModels thanks for help.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>32BitSupportedModels</key>
          <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir5,2</string>
                    <string>MacBookPro10,1</string>
                    <string>MacPro5,1</string>
                    <string>Macmini5,3</string>
                    <string>iMac12,2</string>
          </array>
          <key>BuildMachineOSBuild</key>
          <string>13D21</string>
          <key>CFBundleDevelopmentRegion</key>
          <string>English</string>
          <key>CFBundleDisplayName</key>
          <string>Boot Camp Assistant</string>
          <key>CFBundleExecutable</key>
          <string>Boot Camp Assistant</string>
          <key>CFBundleGetInfoString</key>
          <string>Boot Camp Assistant 5.1.2, Copyright © 2014 Apple Inc. All rights reserved</string>
          <key>CFBundleIconFile</key>
          <string>DA</string>
          <key>CFBundleIdentifier</key>
          <string>com.apple.bootcampassistant</string>
          <key>CFBundleInfoDictionaryVersion</key>
          <string>6.0</string>
          <key>CFBundleName</key>
          <string>Boot Camp Assistant</string>
          <key>CFBundlePackageType</key>
          <string>APPL</string>
          <key>CFBundleShortVersionString</key>
          <string>5.1.2</string>
          <key>CFBundleSignature</key>
          <string>????</string>
          <key>CFBundleVersion</key>
          <string>484</string>
          <key>DARequiredROMVersions</key>
          <array>
                    <string>IM41.0055.B08</string>
                    <string>IM42.0071.B03</string>
                    <string>IM51.0090.B03</string>
                    <string>IM52.0090.B03</string>
                    <string>IM61.0093.B01</string>
                    <string>MP11.005C.B04</string>
                    <string>MB11.0061.B03</string>
                    <string>MBP11.0055.B08</string>
                    <string>MBP12.0061.B03</string>
                    <string>MM11.0055.B08</string>
          </array>
          <key>DTCompiler</key>
          <string>com.apple.compilers.llvm.clang.1_0</string>
          <key>DTPlatformBuild</key>
          <string>5A2053</string>
          <key>DTPlatformVersion</key>
          <string>GM</string>
          <key>DTSDKBuild</key>
          <string>13D21</string>
          <key>DTSDKName</key>
          <string></string>
          <key>DTXcode</key>
          <string>0501</string>
          <key>DTXcodeBuild</key>
          <string>5A2053</string>
          <key>LSApplicationCategoryType</key>
          <string>public.app-category.utilities</string>
          <key>LSMinimumSystemVersion</key>
          <string>10.9.0</string>
          <key>NSMainNibFile</key>
          <string>MainMenu</string>
          <key>NSPrincipalClass</key>
          <string>NSApplication</string>
          <key>PreESDRequiredModels</key>
          <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
          </array>
          <key>PreUEFIModels</key>
          <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
          </array>
          <key>PreUSBBootSupportedModels</key>
          <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir3,2</string>
                    <string>MacBookPro8,3</string>
                    <string>MacPro5,1</string>
                    <string>Macmini4,1</string>
                    <string>iMac12,2</string>
          </array>
          <key>Win7OnlyModels</key>
          <array>
                    <string>MacBook7,1</string>
                    <string>MacBookAir3,2</string>
                    <string>MacBookPro5,5</string>
                    <string>MacPro2,1</string>
                    <string>Macmini4,1</string>
                    <string>iMac10,1</string>
          </array>
</dict>
</plist>

Hello Navtej Dhillon,
Thanks for using Apple Support Communities.
According to the following article, your computer has Boot Camp 5, which only allows for the installation of the 64-bit versions of Windows 8.
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Take care,
Alex H.

Installed windows 8.

Similar Messages

Maybe you are looking for