Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks  Tim 

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

Similar Messages

  • I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

    hello,
    And thank you in advance.
    I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
    I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP.  I've ordered the Windows 8.1 backup media.
    Any way to proceed?
    Thanks  Tim

    download the win 8 iso from here;
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    then start over. install on to your usb along with the support software.

  • I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install  Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

    I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
    So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
    Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
    Thank you.

    You're welcome
    Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • Unable to install Boot Camp and Windows 8.1 on Mac Mini

    Hello,
    My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
    I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
    I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I  settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
    I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
    My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
    Thanks,
    Doug

    Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
    Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
    I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
    So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

  • Lion, Boot Camp and Windows 7 Issues

    Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
    Let me start off with my specs and then I will ask my questions:
    iMac 27"
    i7 Quad Core (1st gen)
    16GB Ram
    1TB HDD
    OS X Lion (Fresh Install - Not Upgrade)
    All updates for OS and iLife and other installed software:
    Adobe Creative Suite CS5
    MS Office 2011
    Boot Camp 4.0
    Window 7 Ultimate
    Ok... here are my questions.
    When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
    What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
    However, when I resart i can hold down the ALT key and get this menu:
    I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
    After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
    Overview:
    Why do I get the Tuxera NTFS error?
    Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
    I can't get Windows to update? Any ideas?
    Thanks for any help you can provide.

    These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
    As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

  • Boot Camp and Windows 7 Problems

    I have found a reproducible bug with Boot Camp and WIndows 7.
    Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
    Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
    I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
    After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
    Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
    Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

    Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

  • Boot Camp and Windows XP right-click

    I have a Mac Book Pro where I have installed Boot Camp and Windows XP with great success. I have one problem; I can not right-click. When I press ctrl+mousepad button it still works as an left-click. Very frustrating. Can anyone please help? And no, I do not have an external mouse
    Best regards
    EtronX
    Mac Book Pro   Mac OS X (10.4.8)  

    Sorry folks Did a search here in the forum and found the answer. To quick

  • Boot Camp and Windows XP Questions

    I have a new intel iMac and want to install Windows XP (just for kicks, really). I have a copy of a Windows XP disc that I bought for my dad a couple of years ago. The Boot Camp page says that you have to have Windows XP with Service Pack 2. How do I know if my XP has Service Pack 2?? I went to the windows home page, and one can download Service Pack 2, but the Boot Camp instructions seem to imply that you have to have a copy of Windows XP with Service Pack 2. Anyone have any insight? Will my XP work?
    iMac Intel, Powerbook G4   Mac OS X (10.4.6)  

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
    Here is a link;
    Forum: Boot Camp Public Beta

  • File not found message during load

    I am trying to ascertain what resource my built EXE can not find during startup. While the reource IS ultimately found, and the APP runs, it displays the "VI not found" dialog during load.
    Any good way to either silence this dialog box of ascertain programmatically which VI is in the wrong location?

    If you do have VI which is to be loaded dynamically...
    This VI might be of helpful in one way or another in the VI's calling path.
    Hope I got your problem right.
    Cheers!
    Ian F
    Since LabVIEW 5.1... 7.1.1... 2009, 2010
    依恩与LabVIEW
    LVVILIB.blogspot.com
    Attachments:
    _findbasedir.vi ‏17 KB

  • Is it safe if i do not backup files during boot camp

    Is it safe if i do not backup files during boot camp

    and also time machine backup and would assume all other OS X backup programs only backup the OS X part the windows data need to be backed up with a windows program

  • Boot Camp and WINDOWS 8

    I bought a new iMac in December 2012. I bought the 64 bit version of Win 8 thinking that I could use Bootcamp, but when the new iMac's came out in 2012 Apple did not have drivers for WIN 8 so my Boot Camp partition was basically useless. I bought Parallels and installed WIN 8 there and it works fine, but of course it is a virtual machine. Apple apparently now has full driver support for WIN 8 so I installed the drivers via a flash drive. That worked but I can't activate WIN 8 with the product key code. I am guessing that Microsoft won't allow the same WIN 8 on both Parallels and Boot Camp. My guess is that Microsoft thinks that I am trying to install the same copy of WIN 8 on two different computers, and in a way, Parallels and Boot Camp may be considered two different computers even though they are on the same iMac. Is there anyway to get around this? Do I have to purchase ANOTHER copy of Windows to use on my Boot Camp partition? And if so, which version of Windows would be best for Boot Camp at this time?
    Thanks in advance for any advice.
    Tom

    I finally got a good tech support dude on the phone. I allowed him to have remote access to my iMac. He got into my Win 8 installation that I have on my Boot Camp partion. He did a LOT of changes to the WIN 8 registry and even used the MS-DOS command prompt (I have not used that in YEARS!) Finally I have WIN 8 Pro on both Parallels and Boot Camp. I guess you could say I am now a happy camper!
    My only problem now (and it is not a big issue, but I might post it in another thread) is that I use an Apple wired USB extended keyboard, and the number keys on the extreme right of the keyboard do not work.

  • Boot Camp and Windows 7 - uncompatible drivers and BC 3.0

    I recently installed Windows 7 on my MacBook Pro using Boot Camp. The installation wen well but when I inserted and tried to run the OSX setup disc, the system referred to known incompatibilities and aborted. I then tried to run the Boot Camp 3.1 driver but this also aborted, stating that Boot Camp 3.0 was missing. I have tried both the 32 and 64 bit Ultimate version and the Enterprise version of Windows 7, always with the same result. I then reinstalled Leopard (and created a mess in a number of other ways) to see if the 3.0 driver had been deleted by mistake. This did not help however. Is there anything I can do?

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

  • Boot camp and windows 7 but window wont find usb to download support drivers

    Used Boot Camp to partition, downloaded support onto USB zip drive, installed Windows 7 fine I thought, but in Windows 7 now it will not find my USB so i can't download the support drivers from my zip drive back into Windows.  No internet found either (probably because i can't download the support drivers).  HELP QUICKLY please!!!

    Boot Camp in Windows has nothing to do with Boot Camp in OS X. So, there was no need for you to reinstall Leopard.
    Since you're using Leopard, your Leopard disc will have the 2.xx drivers, which, (apparently) will not install in Windows 7.
    You'll need to get a hold of the 3.0 drivers. The 3.1 update downloaded from the Apple site won't install without 3.0 drivers installed.

  • Lose airport connection after using boot camp and windows XP

    After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

    I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Maybe you are looking for

  • How to stream IMAC to my TV?

    I just purchased Apple TV set it up.   I updated iTUNEs and my Apple TV software and I am able to view my iTUNES library on my TV.  However, I cannot stream from my IMAC to the Apple TV.  Is there a minimum revision of IMAC needed?  Or are there spec

  • Extend Material Master ...

    Hi, I have to extend the material to several Plants by the T code: MM17, Please guide me thru steps as i am not able to do it on my own.

  • How do I get sync to bring my bookmarks to a android.

    Sync is storing between my laptops but on the android it syncs all my folders but they are all empty. I get no actual bookmarks.

  • I can't conect iPhone with my MacBook

    Hi there. My iTunes doesn't recognize my iPhone as used. I've changed from Leopard to Snow Leopard. How can I fixe that?

  • Apportionment Structure change history

    Hi, Some times Users are changing the Apportionment Structure data in Material master. Our Auditors wants to see all change history related to this Apportionment Structure for the material. Is it possible in standard SAP. Please help me to get the be