Installing 10g R2 on Windows 2000, installer not starting

Hi all,
I am installing Oracle 10g R2 on Windows 2000 Compact ProLiant ML570 with 4 CPUs (x86 Family 6 Intel 701 Mhz), 1 Gb of memory, eight disks and one disk controller.). It has 9i already installed. I downloaded the 10g software and extracted the file into a local folder, however when i click setup.exe, the cmd window fires up saying it is starting up the installer. The command prompt then disappears and no installer is started! I have also try clicking the autorun file and the oui.exe which is within the install directory with no avail. Is this a bug? but then 9i is already installed and the 9i gui fires up fine?
Any help will be greatly appreaciated,
Thanks in advance,
Nikesh

Could you check the java version your are having
Best regards
Deepu

Similar Messages

  • EM 10g Agent on Windows 2000 didn't start

    Hi,
    I need help from you
    I have been installed EM Agent on windows 2000 but it doesn't start!!!
    I have received error:
    The OracleOraEM10g_home1Agent service could not be started.
    A service specific error occurred: 2.
    In Agent Release Notes was said:
    To fix this, ensure that the %WINDIR% and %WINDIR%\system32 paths are included in the SYSTEM path variable. This change may require administrator privileges on the machine. The environment variables can be changed using the System Control Panel.
    I have done it but agent still not want to start,
    where is the problem anybody can me explain?
    Thank you!

    I am having the same kind of problem on my WinXP box. In my case it is intermittent - sometimes it does and sometimes it doesn't start.
    My box is a laptop and I can not run the EM at all when the box is disconnected from the network. So any thoughts I had about doing local development on the plane going home at weekends are shot.
    The Event Viewer in Xp says, "Agent Process terminated abnormally during initialization" The event ID is 4.
    I have not yet found a pattern that matches its successful and its failed startups. I do run Zonealarm on the box, and there is some (slight) evidence that Zonealarm and Oracle do not play nice. I have shut Zonealarm down on the box and tried to manually start the service OracleDBConsoleorcl, but to no avail.
    Any thoughts anyone?
    Thanks
    Chris

  • Cannot install Netweaver CE on Windows 2000 OS - SAP note says I can!!!!!!

    Hi ,
    I cannot install Netweaver CE on Windows 2000 OS, but SAP note says I can... Can anyone reply back if there is any workaround?
    Thanks
    Som

    Hi Som,
    Netweaver CE is supported by following Windows series:
    Windows XP Professional (Service Pack 2) or Windows 2003 Server (Service Pack 1)
    The version has also been tested successfully with Windows 2000 (SP3) and Windows XP (SP1), but is certified only for the two Windows versions above (Note: If you use a Windows XP account without a password , SAP Management Console can not start/stop your instance via Web Service - use system services instead)
    For more on Netweaver CE installation check this:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1011818d-1abe-2910-5897-f72eb59c951a
    Regards,
    Subhasha

  • Install SAPgui 710 on Windows 2000 SP4

    Hi,
    I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
    Although, Install SAPgui 640 on Windows 2000 SP4 is success.

    Hello Sergey
    please be sure that the INTERNET EXPLORER 6  is installed on the W2k Clients!
    If not, then the new NWSapsetup can not start!
    Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
    If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
    Best Regards
    Sven

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • Ipod works on Windows 2000 but not on XP

    I have an empty Ipod click wheel unit . My Itunes library (about 1200 songs) is safely stored on cd's. I have Windows 2000 in the office and Windows XP at home. If I take the cd's and the Ipod to the office, I can get it to run perfectly. I restore the cd's to Itunes and upload them to my Ipod with no problems at all. When I bring the unit home, and plug it into my XP home system, it seems to have great difficulity recognizint the Ipod at all. The Ipod image pops on and off the my computer screen. If I fiddle with the Ipod for a while,just randomly selecting menu items, sometimes I can get it stabilized, at which point I get a message that it is sync ed to another computer. I try to resync it - sometimes it stays up and sometimes it drops out. If it stays on line, the Ipod sync window appears on the screen, and I get an immediate message "upload complete" from my empty Itunes library. I then load a cd to put something in the library to actually sync with, and it loads perhaps 10 or 15 items then I get a message "The Ipod - Patricia's Ipod can not be updated - The required file can not be found" It stops and nothing else will happen. I have tried different plugs, changing drive letter assignments, reloading firmware, complete restore, 5R's, everything I could find, but still I have no luck. My husband has a new Ipod video which operates perfectly with the same XP computer. So, why does it work perfectly with Windows 2000 and not at all with Windows XP?

    Check your firewire connection and/or Windows firewire driver. This is done in Device Manager.

  • Problem in installing Forms 6 on Windows 2000

    I have problem in installing forms 6 on windows 2000.
    Please advise me.
    null

    Hello,
    I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
    The only problem is that the Forms Server won't work till the 1st patch set comes out
    (only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
    I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
    null

  • Installing Oracle 8i on WIndows 2000

    I have installed Oracle 8i on WIndows 2000, and I want it
    configured to work locally on one machine. I get it installed
    with no problem with the seeded database. When I try to log
    into SQL*Plus as anything, i.e. SYSTEM/MANAGER or SCOTT/TIGER or
    SYS/CHANGE_ON_INSTALL, it tries to connect through my modem. Is
    there a way to configure the tnsnames.ora so it doesn't try to
    go through a network?
    Sincerely
    rk

    You probably have to navigate to inside the INSTALL folder. Sometimes the SETUP.EXEs on the root of the CD won't launch. Should be something like INSTALL\WIN32\setup.exe

  • Windows 2000 won't start after iTunes 7.3 upgrade

    Yesterday I upgraded to iTunes 7.3 and after the required reboot, windows 2000 hangs on its startup screen. I can boot from the windows 2000 CD and login to the win2k installation on the hard disk using the admin password, but I don't know how to uninstall iTunes from the recovery console. Any ideas?
    Dell Dimension 4100   Windows 2000  

    Was not able to uninstall easyCD creator, but did get windows to start again by following the directions below from the website listed below. Lots of work still ahead to get it back to normal, but at least I didn't lose all my data.
    http://forums.techguy.org/windows-nt-2000-xp/127361-help-inaccessiblebootdevice-stop-0x0000007b-blue.html
    Method 1: Use a Backup Registry System Hive to Edit the Registry
    Use the Windows 2000 CD-ROM to start the computer.
    If you need a third-party hard disk controller, press S to specify an additional device, and then insert the floppy disk that contains the correct driver for the hard disk controller.
    Press R to repair a Windows 2000 installation.
    Press C to use the recovery console.
    Log on to the Windows installation that you want and type the Administrator password.
    Change to the %windir%\System32\Config\ directory. To do this, type the following command at the C:\Winnt prompt (where C: is the drive and Winnt is the directory where Windows 2000 is installed), and then press ENTER:
    chdir system32\config
    Type ren system system.old, and then press ENTER.
    Type copy C:\winnt\repair\system, and then press ENTER. The following information appears:
    1 file(s) copied.
    Type exit, and then press ENTER to quit the recovery console and restart Windows.

  • Windows XP could not start because the following file is missing or corrupt - message

    Hi there and apologies in advance if this is a daft or very frequently asked question.
    Upon trying to boot up this Toshiba mini NB200 device last night we got this message:
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.  it then asked me to press r at the forst screen to start a repair if I have the original set up cd.
    The device had to be forced to shutdown previously as it hung when shutting down.
    Now multiple reboots (including uncoupling/recoupling the battery) and resetting the settings from start up menu result in the same error message.
    The device has no cd drive installed but previously Jerry Lippey (in 2011) saved the day by recommending purchase of a product recovery disc (R10804EN) after a 'flashing cursor issue' at logon.
    Has anyone far more clever than I any thoughts (if we're able to borrow a portable cd drive) whether this disc may work again?
    Windows XP was/is preinstalled on the PC (we havent the disc) and we've subsequently added MS Works. A total wipe of the device (as long as XP remains?) wont be too much hassle as we havent any data that we're too bothered about on it.
    Many, many thanks in advance 
    Solved!
    Go to Solution.

    Toshiba NB200-11L
    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    Bad news. It means the System hive, which is the most important branch of the registry, is corrupt. Unless you have made provisions for this (we always do on XP systems), the fix is too complex for you to handle (KB307545).
    I'm afraid you'll need to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media as you did before. Do you have important files to rescue?
    -Jerry

  • IAS_101330_Apache2_Modplsql2_win32 universal installer not started

    iAS_101330_Apache2_Modplsql2_win32 universal installer not started with Oracle 11g database installed in the same server. I tried to use the Oracle 11g universal installer to open the products.xml file under the iAS_101330_Apache2_Modplsql2_win32 directory. However, it still complained that all components must be 11g. Does anyone have experience installing Oracle 11g and Oracle HTTP Server in the same box? I don't want to use the embedded PL/SQL gateway.
    Thanks.
    Andy

    I had faced the same problem exactly and looks like this is the expected behaviour with higher version of installer.
    Please download 3540563 patch (which is a software of oracle universal installer) and install it in a seperate home and using that installer you should be able to install the apache.
    I am trying the same but now i am getting this problem:
    "Not all the dependencies for the component Oracle Client 10.2.0.1.0 could be found..."
    I will update it again if i find any solution for my above problem.

  • Windows vista do not start

    Windows vista do not start.  
    I have tried starting in the different safe mode, none works (after the loading bar it all just becomes black), also tried start repair it just says that start repair can not fix the error.  I have check if I could restore it to a previus state when it work, but it seems like it hasnt save any for some reason. . I have done diagnostic test on the hardware and everything seems to be fine.  Probably some virus.
    Can I still reinstall the windows without overwriting every personal file?   I can not see any option of just reinstall the window only, not the the hardrive.  Can I do this in bios maybe? To me you should be able to reinstall just windows and nothing else. It is ok, if the the virus is still there after I have reinstall just windows, what I want to do is save some files, so if I can only come in the computer for 5 min, that is all I need.
    I have read that you maybe can save files with  downloading linux and load the computer with that to get access to the files. But I do not have a seperat computer with dvd or  usb stick. All things can be fix, but it will both cost money and is a little bit of a hassel, for something then maybe not even work in the end.

    Your options a limited here.
    Should you wish to save your files you will have to put the hard drive in an external hard drive caddy and plug it into the USB port of another computer to transfer your files.
    Once done, put the hard drive back into your computer and perform a factory restore which will return your computer to it's original state as when you got it.  You will have to reinstall your programs and data files.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • Why does installation not start after the message "setup wants to make changes"?

    Why does installation not start after the message "Setup wants to make changes.  Type your password to allow this"?

    Hi
    It wants your system's admin password. Standard procedure on Mac for non-admin users
    Thanks

  • How to install Developer 10g suite on windows 2000

    Hello
    I downloaded the two files namely ds_windows_x86_101202_disk1 and
    ds_windows_x86_101202_disk2.
    When I try to install these after extracting to one temp folder and when I run the setup
    on windows 2000 OS, I am always getting the the error insert disk 1 or specify the location of the product .
    Please suggest how to proceed.
    Also if I extract the above files can I proceed with that or are there are any additional files to be extracted. I fact I went through all the files and folders and whereever there was archive files I have extracted them.
    I need urgent help to install these files.
    Thanks in advance

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rajesh at [email protected]:
    I am trying to install Oracle 8 Enterprose on
    Windows 2000 , but I am geting OS Error
    at the beginging of the installation.
    Does anybody knows whether I can install
    Oracle on Windows 2000?<HR></BLOCKQUOTE>
    Hi Rajesh borikar,
    I encounter similar problem as you. If you have any clues, please let me know too..thanks
    regards
    Andrew
    null

  • Installing Flash Player on Windows 2000

    Thanks to numerous past discussions, methods have been found for installing Flash Player 11.2.202.235 on Windows 2000. See this thread, which explains how to use HxD Hex Editor to make a simple change that will allow installation on Windows 2000:
    http://forums.adobe.com/message/4428785
    The original post goes into fine detail with illustrations. Here's a quick redux:
    - Download the latest Adobe Flash Player (IE or non-IE) for Windows 32-bit systems.
    - Download HxD Hex Editor hereabouts (VirusTotal rates it clean):
    http://mh-nexus.de/en/hxd/
    - Unzip and install HxD.
    - Launch HxD and open the Adobe Flash Player Installer, something like:
    install_flash_player_32bit.exe
    - Hit F3 for HxD's search function, and search for SetDllDirectoryW
    - On the right-hand side of the HxD display, change SetDllDirectoryW to GetModuleHandleW
    - SaveAs install_flash_player_32bit_Win2k.exe or similar.
    - Quit HxD and run the modified Flash Player Installer. It should install fine on Win2k.
    This worked for me using Flash Player Installer 11.2.202.235, both IE and non-IE versions.
    This is a hack and is not officially supported by Adobe.

    I installing the Adobe Flash plugin ONLY by my own hand. Sadly, Adobe did not come up with zip archive with just the plugin dll file, but I install - copy the DLL - and uninstall. Then manually delete the remaining files and just use the DLL or the installer.
    To make the installe work at Win2k, the very same hack is need - hack the Flash Util file the same way, as the dll - change in it the SetDllDirectoryW to GetModuleHandleW and that it is!
    If someone want, there is Flash Util and Adobe Flash as DLL files, hacked with W2k:
    http://rapidshare.com/files/3122942562/Flash%20Players%20for%20W2k.zip
    http://depositfiles.org/files/max4wif3c
    http://www.sendspace.com/file/z2t9j2
    Archive contain Adobe Flash unpacked (ready to copy into Firefox) with their utility files hacked for W2k in these versions: Flash Player 9.0.124.0, Flash Player 10.0.32.18, Flash Player 10.1.85.3, Flash Player 10.1.102.64, Flash Player 10.2.159.1, Flash Player 10.3.183.29, Flash Player 11.2.202.235, Flash Player 11.3.300.273, Flash Player 11.4.402.287
    Interesting thing. Fullscreen video won't work on YouTube (only white screen, sound go ok) with Firefox v3.0.14 and Adobe Flash higher version that 10.0.32.18... Strange, strange 
    (could be that the Firefox is kinda old, but it is weird that v10.0.32.18 works flawlessly and just v10.1.85.3 not at all in fullscreen... I also use relatively old Forceware drivers v45.28 on crap GF2MX400 card :-) )

Maybe you are looking for