Installing 11GR2 on OEL 5.2 error linking ins_ctx.mk

I am attempting to install the 11GR2 software on our Oracle Enterprise Linux 5.2 server. I have verified that all the required rpm packages are installed on this server. When I attempt to install the software it fails during the linking phase with the following message:
Error in invoking target 'install' of makefile '/data2/oracle/product/11.2.0/dbhome_1/ctx/lib/ins_ctx.mk'
When I review make.log file I see the following error message:
/lib/libgcc_s.so.1: undefined reference to `__stack_chk_fail@GLIBC_2.4'
collect2: ld returned 1 exit status
make: *** [ctxhx] Error 1
I searched My Oracle support and this forum and did not find any similar errors. I would appreciate it if someone could point me to the solution as I need to get this software installed today.
Thanks
Just as a side note: This server has a two other 10.2 databases installed one of which is an E-Business 11i database. This is my first 11GR2 installation on this server.

Hi.
Check that you don't have any old 'compat-binutils215' RPMs installed on your system.
The following solution worked for me;
rpm -e compat-oracle-el5-1.0-5.i386 (this package was dependent on the "compat-binutils215").
rpm -e --noscripts  compat-binutils215-2.15.92.0.2-24
I had previously required these RPMs, but I no longer needed them (because I upgraded from 11i to R12). Obviously you need to be sure that you don't requires these RPMs anymore.

Similar Messages

  • How to install 11gR2 on oel 5.4

    how to install 11gR2 on oel 5.4?is there any side effect for 11gR2 on OEL 5.4 with ASM?
    does oel 5.4 supports 11gR2 and ntfs mount?
    Edited by: ghost_rieder on Sep 26, 2009 1:11 PM

    The 11gR2 installation on OEL-5.4 is pretty simple and easy, although the OUI interface has been changed. No side effect with ASM, but installation procedure is something different (grid infrastructure) for a standalone installation (single database with ASM). Also, deinstallation of software is now performed via separate package 'deinstall' (not via OUI as before). There are 7 zip files downloadable from OTN:
    linux.x64_11gR2_database_1of2.zip
    linux.x64_11gR2_database_2of2.zip
    linux.x64_11gR2_grid.zip
    linux.x64_11gR2_client.zip
    linux.x64_11gR2_examples.zip
    linux.x64_11gR2_gateways.zip
    linux.x64_11gR2_deinstall.zip
    The first two are for database, the third is for grid infrastructure including ASM installation for single database. If you want a standalone installation with ASM, you must first install grid infrastructure software in its own oracle home (must be different from database home) and configure ASM and listener in that home. When ASM and listener are active and running in grid infrastructure home, install database software in database home and build the database via dbca in database home.
    NJ

  • I have install 11gR2 on my laptop getting error

    I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
    I getting this error
    ORA-01503: CREATE Controlfile / Failed
    and
    ORA-01158: Database already mounted
    i need to set up a database a 3 different schema
    because i am doing a install of Hyperion Share service, Essbase and Planning
    this is the first install on my laptop !!!!!!!!!!!!!
    can I get the detail process on setting up an Database and schema
    Please advise

    You have already asked the same question but never replied - 11gR2 Error when installing a database essbase on install of 11.1.2.1
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Linux: error in invoking 'ntcontab.o' of makefile while installing 11gr2

    Hey all,
    I installed Oracle Linux 6.1 under VirtualBox (hosted on a Windows 7 box).
    All is well and I began to install Oracle 11g for Linux, but ran into this error:
    Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/home/Roy/app/oracle/product/11.2.0/dbhome_1/network/lib/ins_net_client.mk'. while installing 11gr2 client on Linux x86-64 bit serverWhen I dug into the logs, the error was this:
    INFO: mv: cannot stat 'ntcontab.o'
    INFO: : No such file or directoryCan anyone provide a link to resolution?
    Thanks

    You are using an unsupported OS - pl try with a supported OS version.
    http://download.oracle.com/docs/cd/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD
    HTH
    Srini

  • Java.lang error while installing 11gR2 Grid Infrastructure on HPUX 11.31

    Hi,
    I am installing 11gR2 Grid Infrastructure on HPUX 11.31 Itanium server for installing RAC database.
    I do not get any error during the installation of the software but while running the root.sh I am getting following error..
    # /opt/oracle/app/11.2.0/grid/root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /opt/oracle/app/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    2010-04-23 15:09:28: Parsing the host name
    2010-04-23 15:09:28: Checking for super user privileges
    2010-04-23 15:09:28: User has super user privileges
    Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    stty: : Not a typewriter
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting
    CRS-2672: Attempting to start 'ora.gipcd' on 'bmblade-91'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'bmblade-91'
    CRS-2676: Start of 'ora.gipcd' on 'bmblade-91' succeeded
    CRS-2676: Start of 'ora.mdnsd' on 'bmblade-91' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'bmblade-91'
    CRS-2676: Start of 'ora.gpnpd' on 'bmblade-91' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'bmblade-91'
    CRS-2676: Start of 'ora.cssdmonitor' on 'bmblade-91' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'bmblade-91'
    CRS-2672: Attempting to start 'ora.diskmon' on 'bmblade-91'
    CRS-2676: Start of 'ora.diskmon' on 'bmblade-91' succeeded
    CRS-2676: Start of 'ora.cssd' on 'bmblade-91' succeeded
    CRS-2672: Attempting to start 'ora.ctssd' on 'bmblade-91'
    CRS-2676: Start of 'ora.ctssd' on 'bmblade-91' succeeded
    Error occurred during initialization of VM
    java.lang.Error: Permission denied
    sh: 10154 Abort
    Configuration of ASM failed, see logs for details
    Did not succssfully configure and start ASM
    CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
    CRS-4000: Command Stop failed, or completed with errors.
    Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
    Stop of resource "ora.crsd -init" failed
    Failed to stop CRSD
    CRS-2500: Cannot stop resource 'ora.asm' as it is not running
    CRS-4000: Command Stop failed, or completed with errors.
    Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
    Stop of resource "ora.asm -init" failed
    Failed to stop ASM
    CRS-2673: Attempting to stop 'ora.ctssd' on 'bmblade-91'
    CRS-2677: Stop of 'ora.ctssd' on 'bmblade-91' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'bmblade-91'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'bmblade-91' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'bmblade-91'
    CRS-2677: Stop of 'ora.cssd' on 'bmblade-91' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'bmblade-91'
    CRS-2677: Stop of 'ora.gpnpd' on 'bmblade-91' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'bmblade-91'
    CRS-2677: Stop of 'ora.gipcd' on 'bmblade-91' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'bmblade-91'
    CRS-2677: Stop of 'ora.mdnsd' on 'bmblade-91' succeeded
    Initial cluster configuration failed.
    Do anybody came accross this issue? I had 11gR2 Grid Infrastructure installed on this server, but for demostration to other team members, I removed the earlier installation using Metalink Note :942166.1. I will appreciate your input.
    Regards
    Shailandra

    Hi,
    One of the recommended solution for this issue by Oracle.
    Have the DISPLAY variable set when running root.sh. This is the th recommendation by oracle to a SR opened by another vendor for this issue.
    Regards

  • I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is i

    I purchased photoshop elements and i am having all the problems in the world installing it.... first the link in the emails were errors and secondly i have downloaded and installed multiple times and it says my serial number from the email i received is incorrect.... please help

    Ok, since this forum is for Photoshop Standard and Photoshop Extended, we don't know much about Photoshop Elements. There is a Photoshop Elements forum and I'll link it for you since they best know how to field your questions.
    Photoshop Elements
    Good luck on it! 
    Gene

  • I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

    I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem.  I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction.  Thank you!

    update directly, Product updates

  • Error installing 11gR2 on windows 8

    I downloaded oracle database 11gR2 software for windows X64 platform from OTN.  it contains two distinct zip files(file1 and file2).  the first file extracted but couldn't do the same for the second file. It keeps telling me zip file is empty. I decided to go along and install but after 40% (copying file), I got an error saying the file path was not found
    ' File not found C:\app\Chike\product\11.2.0\dbhome_2\owb\external\oc4j_applications\applications\WFMGRApp'
    pls I need possible solutions to solve this.
    thanks Guys

    First, Win 8 is not a certified OS to install 11gR2 - Oracle Database Preinstallation Requirements
    Which version of Win 8 ? If you have Pro or Enterprise, you will have to install 12c - Oracle Database Preinstallation Tasks
    Home versions of Windows are not certified for any Oracle installs.
    You will need to download both zip files, then unzip both into a single directory before running setup.exe. Your unzip issue indicates that the second zip file is corrupted.
    HTH
    Srini

  • Error linking (Redhat 7.1 install)

    Hi..
    I get this ..error linking.. error installing Oracle 8EE on a redhat 7.1
    I'm no Linux genious so any hints ?

    Strange think is that if leave out the RDBMS part of the installer the installation works fine..
    Then I run the glib patch with some errors (it cant't find some files).
    And now I can install the RDBMS just fine..
    And after installing the RDBMS i can install the databse objects without errors.. Still the "admin" dir only contains one empty directory "TAR".. Shouldn't there be some SQL scripts there ?
    And many of my oracle binary files are stored twice in the bin directory.. the second copy with a "0" (zero) addet to it's filename ?
    What went wrong ?
    If I try to run any of the files in the "bin" directory i jyst get "error while loading shared libraries: libclntsh.so.1.0: cannot load shared object file: No surch file or directory ?
    I'd be really gratefull for some help here !
    Best Regards - Kim

  • Install 11gR2 on RedHat 6 or OEL 6

    Hi All,
    I am installing 11gR2 on our Linux RH 6  server.
    I got this pre-req setup for the install guide in ORACLE-BASE website (one of my idol site).
    But when I restarted the server, I got error kernel panic , and can not boot the server
    What parameter here caused it to panic? It did not mention specifically. 
    Please Helpppp...Thanks.
    Hosts File
    The "/etc/hosts" file must contain a fully qualified name for the server.
    <IP-address>  <fully-qualified-machine-name>  <machine-name>
    For example.
    127.0.0.1       localhost.localdomain  localhost
    192.168.0.181   ol6-112.localdomain    ol6-112  
    Oracle recommend the following minimum parameter settings.
    fs.suid_dumpable = 1
    fs.aio-max-nr = 1048576
    fs.file-max = 6815744
    kernel.shmall = 2097152
    kernel.shmmax = 536870912
    kernel.shmmni = 4096
    kernel.sem = 250 32000 100 128
    net.ipv4.ip_local_port_range = 9000 65500
    net.core.rmem_default = 262144
    net.core.rmem_max = 4194304
    net.core.wmem_default = 262144
    net.core.wmem_max = 1048586
    Add or amend the following lines in the "/etc/sysctl.conf" file.
    fs.suid_dumpable = 1
    fs.aio-max-nr = 1048576
    fs.file-max = 6815744
    kernel.shmall = 2097152
    kernel.shmmax = 536870912
    kernel.shmmni = 4096
    #semaphores: semmsl, semmns, semopm, semmni
    kernel.sem = 250 32000 100 128
    net.ipv4.ip_local_port_range = 9000 65500
    net.core.rmem_default=4194304
    net.core.rmem_max=4194304
    net.core.wmem_default=262144
    net.core.wmem_max=1048586  
    Add the following lines to the "/etc/security/limits.conf" file.
    oracle              soft    nproc   2047
    oracle              hard    nproc   16384
    oracle              soft    nofile  4096
    oracle              hard    nofile  65536
    oracle              soft    stack   10240
    Amend the "/etc/security/limits.d/90-nproc.conf" file as described below. See MOS Note [ID 1487773.1]
    # Change this
    *          soft    nproc    1024 
    # To this
    * - nproc 16384
    Set secure Linux to permissive by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.
    SELINUX=permissive
    Once the change is complete, restart the server.

    Hi,
    Please refer the below document
    Requirements for Installing Oracle 11.2.0.3 RDBMS on RHEL 6 on zLinux (s390x) (Doc ID 1470834.1)
    Thanks,
    Rajasekhar

  • Pc cannot install purchased photo elements 13.  Error message appears:  File archive part missing from Adobe Photo Elements 13.  You need all parts in the same folder in order to extract Adobe Photoshop 13.  please download all parts.

    Cannot install my download due to above error message.

    Hi revbos,
    Apologies for your incovinience.
    Requesting you to please go to https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us. When you click on download button (after selecting your OS details), it should open a new browser window (which will launch the Akamai installer automatically). Please cancel any installation or error shown.
    The newly opened browser page will look something like this:
    As highlighted, please click on these links (one by one) and see if it downloads the required files. The downloaded files will be compressed with 7z format. If you have some extracting tool (like WinZip) try extracting it. If you don't have it, download 7z. Its a free utility from Microsoft. Once downloaded and installed, you will be able to extract file and locate the PSE setup.
    Please let me know if you face any issues.
    ~Surendra

  • When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    All I want to do is upgrade from 9 to 10 so that I can run my ipad.
    When installing iTunes 10 I get an error message "Invalid Drive: F:|". ANy advice?

    Bissley,
    I have received this error in the past and it is usually caused by Windows automatically changing your external drive letters when you install. There are two ways around it; first, follow the directions provided by b noir. Second, within iTunes go to Edit > Preferences > Advanced
    Under the advanced options you'll see a recessed section called "iTunes Media folder location". Although you may have set this in the past it, if Windows changed your drive letters it will no longer be valid. Default is usually "C:\blah\blah\mymusic"
    Changing it just a matter of clicking "change" and finding your music folder again or change your drive letter back (if it changed at all).
    If Windows is changing your drive letters, it is best to set them yourself so that everytime you plug in the devices they use the letter you assigned. Here is a link for that process:
    http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter
    Hope it helps.

  • Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me:   "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

    Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
    "Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    i am unable to install photoshop elements13 due to an error. it shows no error code but does say - This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements.

    download the 64bit installer,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Installing 11gr2 in Oracle Linux 6.3 (./runInstaller - permission denied)

    Whenever i try to run ./runInstaller in terminal,
    i get the error as Permission denied ,
    While installing oracle linux 6.3 , i have given root password and in terminal ,
    even though being a root user, can't install the Oracle Database 11gr2.
    I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
    Pls help me anyone, as am a beginner in the field of Linux environment.
    Thanks...
    Edited by: flixblixclix on Jan 1, 2013 10:51 PM

    979352 wrote:
    Whenever i try to run ./runInstaller in terminal,
    i get the error as Permission denied ,
    While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
    From Oracle® Database Installation Guide
    11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
    4.5.1 Running Oracle Universal Installer
    For any type of installation process, start Oracle Universal Installer and install the software, as follows:
    Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
    even though being a root user, can't install the Oracle Database 11gr2.
    I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
    Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
    >
    Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM

Maybe you are looking for

  • G5, DVI to ADC Adapter & Belkin Switch

    I've got a Dual core 2ghz G5 running 10.4.11, currently connected to a 23" old style cinema display. I have bought a DVI to ADC adapter (the one with power) and a Belkin DIV-D Switch so that I can run a PC and the G5 through the display. The problem

  • Clicking noise in iTunes 8.2

    I am experiencing a new clicking noise in any song I have in my library all the sudden. These files have all been ripped properly and they have been working for years with no problems. All of the files I have also play perfectly in Windows Media Play

  • Field Status - G/L

    Hi All, I just want to understand the concept of field status group assigned to a G/L account and if it has any impact on business transaction. We have defined a g/l account as an expense account but we would like to change the field status group of

  • Error in reading the pages of BAIO offline packages documents

    I downloaded a BAIO offline documents ----"SAP Best Practices Baseline package".  when I read the contents in "preconfigured processes"--->"entry level scope"----->"scenario maps", the page didn't show the map chart and gave me an error of javascript

  • Break point for the particular user

    Anybody knows how to set up a break point for the particular user on a particular statement. So I can see this breakpoint on my screen when it happened?