Installing a generic unix webclient on my MacBook Pro

Hello,
I have a small question. I'm trying to install a webclient on my new Intel based MacBook Pro 2.16 Ghz under X11. When I use :source setupunix_3.0.74.bin.sh
the script starts, but at a certain point it says :
This application requires a Java Run Time Environment (JRE)
to run. Searching for one on your computer was not successful.
Please use the command line switch -is:javahome to specify
a valid JRE. For more help use the option -is:help.
Then when I give the instruction: Java -version : it shows
java version "1.5.0_06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_06-112)
Java HotSpot(TM) Client VM (build 1.5.0_06-64, mixed mode, sharing)
Am I doing something wrong, is JRE not running or is the generic script not valid for my Mac?
Maybe I can send an email with the script attached to it to an Unix Guru?
Thanks for any help
Jack
MacBook Pro   Mac OS X (10.4.7)   15", 2.16Ghz Intel Core Duo

You might want to post your query in the forum for Unix questions:
http://discussions.apple.com/forum.jspa?forumID=735

Similar Messages

  • I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

    I want to install a third operating system on my macbook pro. I already have windows and i want install unix or linux in there. Is it possible??

    Yes, it's possible, but if your Windows system is on a Boot Camp partition then you have to first remove it. Then create however many partitions you want for the operating systems. You have OS X on one, so you need two more - one for Windows and one for Linux. You then install Windows and Linux separately to their respective partitions. Download rEFIt
    Use it as the replacement bootloader so you can properly boot from each OS properly.

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • Error install windows 8.1 on a 2010 macbook pro 13 inc

    hi.
    i am trying to install windows 8.1 on a 2010 macbook pro 13 inc
    i have now successfully make bootcamp show the option to create a windows 7 install disk how ever it does not show the other part of create windows 7 or “later version” install disk .
    and also i get an error when making a windows 8.1 bootable disk which says
    “boot camp only supports windows 7 installation on this platform.plz use an iso file for windows 7 installation””
    need help plzz
    thank you
    —–afrah—-
    Message was edited by: afrah000

    Welcome to Apple Support Communities
    Although you managed to "hack" Boot Camp Assistant and you can create a Windows USB installer, you will not be able to boot from the USB drive and you will get a nice "No bootable device" screen after restarting your Mac.
    Apple has set up Boot Camp Assistant in order to show the option to create a USB installer only in Macs which support it. In the case of the MacBook Pro, only MacBooks Pro with Retina display support that option, so you are out of luck. You need Windows on a DVD.

  • When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages.  When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates.

    When I try to open a Pages document from iCloud, created on my iPad, I get message stating I need a newer version of Pages.  When I go to app store all I get is "installed" when looking at pages app. my Macbook pro is up to date with all updates. Any ideas?

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5/5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5.1 sometimes can not open its own files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has not only managed to confuse all its users, but also itself.
    Note: Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Does anyone know how to install Windows 8 on a late 2008 Macbook Pro without a previous copy of Windows 7?

    So, I'm trying to do a direct install of Windows 8 on my old Macbook Pro, but my machine isn't officially supported for Windows 8; I get an error message every time I try to use boot camp. I previously had Windows 8 running, but that was because I had upgraded it from Windows 7. Later on I ran into problems because I couldn't update to Windows 8.1 so I ended up deciding to just erase the partition and start over. Since then, unfortunately, I've lost the Windows 7 install disc I used and now it turns out Boot Camp won't help me do the install. Is there a way of manually installing Windows 8? Without the help of Boot Camp? Any help would be much appreciated. Thanks!

    So, I'm trying to do a direct install of Windows 8 on my old Macbook Pro, but my machine isn't officially supported for Windows 8; I get an error message every time I try to use boot camp. I previously had Windows 8 running, but that was because I had upgraded it from Windows 7. Later on I ran into problems because I couldn't update to Windows 8.1 so I ended up deciding to just erase the partition and start over. Since then, unfortunately, I've lost the Windows 7 install disc I used and now it turns out Boot Camp won't help me do the install. Is there a way of manually installing Windows 8? Without the help of Boot Camp? Any help would be much appreciated. Thanks!

  • Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
    Clinton

  • Warning: Don't install Windows 7 64-bit on Older MacBook Pros

    I totally hosed my machine by installing Windows 7 64 bit on a MacBook Pro that Apple has not deemed to be okay with running Snow Leopard in 64-bit. I have a Core 2 Due, which is fully 64-bit. Windows 7 64-bit runs perfectly on a MacBook Pro, but Apple's Snow Leopard can only handle 32-bits. Crazy.
    I'm guessing Windows 7 updated the MacBook Pro's EFI to 64 bit, which since my Firmware hasn't been updated, can't recognize or load. Some I'm stuck.
    Does anyone know how to return a 64 bit efi back to its original 32 bit version? I've been forced to reinstall Snow Leopard, hopefully the Disk Image I created will be able to bring back my data, otherwise I'm screwed and really ******.
    Message was edited by: nova

    I don't think Windows 7 would normally modify your Guid Partition Table, but Boot Camp
    (particularly the later versions) is rapidly gaining a nasty reputation for hosing partition maps.
    Test Disk might could help:
    http://www.cgsecurity.org/wiki/TestDisk
    You will need to boot it in firewire mode (if supported) or from an external clone.
    I hope your disk image is good. Rule of thumb for OS Disk Images:
    Make them sparseimage or sparsebundle, do not compress, and last but not least;
    Make 2 of them. Just some friendly advice.
    I have yet to see anyone repair a defective, compressed, UDIF disk image. I have
    successfully repaired sparse UDSP/UDSB images using either disk utility and/or Disk Warrior
    and/or iPartition or some combination of the three.
    I'm not against disk images, to the contrary, I use them almost exclusively for backup lately.
    I mount them, then place a clone or data on them using Carbon Copy Cloner or Chronosync.
    Of course I only use UDSP/UDSB uncompressed images.
    Kj ♘

  • When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

  • HT204048 Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013?  The windows software I need won't run on Windows 7 64 bit.

    Is there any way at all to install Windows 7 32 bit onto a MacBook Pro 13 in Retina Late 2013? The windows software I need won't run on Windows 7 64 bit.

    Not using Boot Camp, but you should be able to using virtualization software such as Parallels to run Windows concurrently with OS X.

  • I wand to install Windows 7 on my band new Macbook Pro 13 inch. Do I need to buy a specific Mac version of Windows 7 or do I install a standard Windows 7 OS on the Mac

    I want to install Windows 7 on my band new Macbook Pro 13 inch and use Parallel Desktop 6 torun it alongside my Mac OS. Do I need to buy a specific Mac version of Windows 7 or do I install a standard Windows 7 OS on the Mac using boot camp.

    As vazandrew said, Boot Camp will work with any standard copy of Win 7.
    The only exception would be if you want to run it in a virtual environment, such as with Parallels or WMware.
    I personally recommend Boot Camp, however, since it only uses the resources for one OS at a time.

  • I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

    i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
    did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
    thanks for your help

    It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Source means the external old drive. Destination means the new internal drive.

  • Trying to install a SSD Hard Drive on a MacBook Pro.

    I'm trying to install a SSD Hard Drive on a MacBook Pro as the original one has failed. How do I install the Operating System onto it?
    I've read that you have do it through System Recovery

    New disks Do Not contain Recovery partitions for OSX, your advice is incorrect. Check before you post next time.
    The OP's machine may need to be reinstalled from discs rather than recovery, but without knowing the age of the Mac that is a guess.

  • Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).

    Can I install one 8 GB ram in a MacBook Pro (13-inch, Early 2011).  The other slot is not working, I have only one slot that works. It is stated in this link http://support.apple.com/kb/HT1270#link1 , that the maximum memory is 8 GB where every slot slot has 4 Gb.  Is there any problem if i install only one 8 Gb ram in the working slot ?

    You should be able to do that.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM
    Understand that there is no guarantee it will work, but based on the above it should work for you.

  • Installing a better Hard Drive in my MacBook Pro

    Hey guys,
    I'm looking to install a better hard drive into my MacBook Pro (15.4" Intel Core 2 Duo 2.2 Ghz) that I bought last September, and I'm strictly a software guy: I know little to nothing about hardware.
    I'm hoping to upgrade from a 120 GB to a 320 and hopefully from 5400 rpm to 7200 rpm. Is there any other specifications I need to follow, other than it needs to be a notebook hard drive and it needs to be SATA?
    I have these picked out from a previous post:
    http://www.ifixit.com/Apple-Parts/320-GB-7200-RPM-Hitachi-SATA-Hard-Drive-New/IF 107-063
    http://www.newegg.com/Product/Product.aspx?Item=N82E16822145228
    Is there any difference besides the price? Will both work in my computer?
    Also, I have the AppleCare protection plan. Is there someone who can install a hard drive for me that won't void the protection plan?
    I tried calling an apple store, and they want me to come in to the apple store and talk to a genius, which is too difficult for me at the moment.
    Thanks,
    - Keith

    Yeah I'm more of a speed freak, I admit it. 7200 RPM sounds good even sacrificing the size, because I already have an external and intend to get a huge desktop in the next few years. Also, my laptop is much more powerful than any of my computers could ever be upgraded to be.
    Also, I talked to my brother who says compared to my 5400 rpm hard drive, a 7200 rpm hard drive will run *significantly hotter* and get *significantly less battery life* (~30 minutes depending). Has anyone here upgraded a 5400 rpm notebook hard drive to a 7200 rpm hard drive before? Can you say anything about these claims?
    I'm pretty sure I'm getting one of these two:
    http://eshop.macsales.com/item/Hitachi/0A57547/
    http://eshop.macsales.com/item/Western%20Digital/WD3200BEKT/
    Any advice of comparison, brand loyalty, or how these specific hard drives will compare when it comes to heating up or battery life would be appreciated (for example, the Hitachi one claims to use less energy and user reviews claim to get better battery life).
    Thanks,
    - Keith
    Message was edited by: Keith A.

Maybe you are looking for

  • IWeb and uploading to a different .mac account

    where do I set the settings for the specific .mac account I want the web published to? I have 2 .mac accounts and I would like to post to both .

  • How to connect Equium A100 and second computer via LAN

    hi, i was wondering if someone could help me. My partner and me are having some difficulties with creating a LAN between his computer and my laptop. Basically the gist of it is that his computer can see my laptop, but it's not recipricating. My lapto

  • HT4818 15" Retina Display MacBook Pro and Bootcamp Assistant crashes.

    I've spent several days with the AppleCare Support team and also with the Genius Bar team at my local Apple Store on this issue. Has anyone else with a MacBook Pro 15" Retina Display encountered the same problem?  A colleague of mine who has a 13" Ma

  • 10.2.1.2941

    Busy loading update, will comment later.

  • Cannot build executable

    When I try to build an executable I get an error saying a vi is not executable when in fact it is working fine. Sometimes the error is this instead: NI-488: Command requires GPIB Controller to be Controller in Charge. or LabVIEW: An input parameter i