Installing Additional Processor in Single Processor G5 Xserve Model M9743LL

I purchased a used G5 Xserve Model M9743LL/A, that comes with a single processor. Is it possible to upgrade the Xserve by adding a second processor? The Xserve appears to have the exact same physical configuration as the dual CPU model. Does it have a different motherboard? What would prevent an upgrade?

Yes, the XServe G5 Rev B is the one with yellow DDR 2GB print close to the RAM slots. So it should accept up to 8 x 2GB RAM. You'll need the processor module, that includes the heatsink, 2 screws and the plastic heatsink cover with G5 on it. My Apple Reseller order everything for me. I'll contact them to get the spare part numbers, and i'll post everything here.
I can recall i just booted the Xserve, and after it was started up, it showed it was a dual processor model. So no reïnstalls or zapping the PRAM...
Message was edited by: Roald73

Similar Messages

  • Hyper-V cannot be installed: The processor does not have the required virtualization capabilities.

    I am trying to use Visual Studio 2013 with Windows Phone SDK 8.0 on Windows 8.1 Enterprise running as a guest in a VirtualBox virtual machine hosted from Windows 7 Ultimate.  The Windows Phone emulator in Visual Studio will not work.  The
    guest Hardware Virtualization settings for VT-x and Nested Paging are selected.  The BIOS setting for Virtualization is enabled.  However, in the guest Windows 8.1 features settings, the "Hyper-V Platform" option is disabled and indicates
    that the "Hyper-V cannot be installed:  The processor does not have the required virtualization capabilities."  However, I checked on my processor which is an Intel (Clarksfield), I7-740QM 1.73 and it supports Hyper-V,
    SLAT/EPT.  My BIOS has only a single option for enabling Virtualization but none of the other SLAT/EPT, VMX, XD options.  I am lost here.  Is there a solution?  Do I need to use Visual Studio 2013 and Windows Phone SDK 8.0 directly
    on a Windows 8.1 host and not through a virtual machine?

    You can't run Hyper-V inside a VirtualBox VM (nested virtualization).  It doesn't pass through the necessary CPU requirements.
    The only virtualization solution that allows for nested VMs is VMware's Workstation and vSphere Hypervisor (ESXi). VMware Player is their free product, you may be able to use it, I've not tried player, but have nested Hyper-V in both Workstation and ESXi.
    Follow the instructions here for setting up VMware Player, you need to set the VM settings and .vmx file for it to work.
    http://www.virtuallyghetto.com/2011/07/how-to-enable-support-for-nested-64bit.html
    http://www.rickygao.com/enable-hyper-v-under-vmware-workstation-for-your-lab/

  • New Pb after install second processor

    Good evening
    I have a problem again after switching to dual processor machine.
    I can not install my new apps -  3dsMax 2011 and Vue 8.5 -
    The FrameWork not install or recognize an AMD 32 machine!
    Anybody have an idea?
    Thank you in advance
    Franck
    ThinkStation D10 bi Xeon - New bios - Windows vista 64 (not reinstalled after switching to dual processor)

    PB after installing second processor in D10.
    I have problems getting updates to install Windows or 3D applications. Is there a particular process for windows, a special framework?
    In short, since installing the second processor, I do not feel like winning a lot of power but rather to have lost $ 400!
    Someone has an idea?
    Thank you in advance

  • HT3775 unable to get quicktime movies to play on my imac. This is the error message I always get. "The document "4-20130701090400-5.mp4" could not be opened. The movie is not in a format that QuickTime Player understands.You may need to install additional

    Unable to get Quick time movies to play on my imac. This is the error message I allways get.
    "The document “4-20130701090400-7.mp4” could not be opened. The movie is not in a format that QuickTime Player understands.You may need to install additional software to open this type of file."

    Download and install VLC Player. It plays more formats and is free and highly regarded.
    http://vlc-media-player.en.softonic.com/mac
    Cheers
    Pete

  • HT204382 MAC PRO10.6.8 just downloaded file sent  5/2010 "BoogieWoogie" (4-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of

    MAC PRO10.6.8 just downloaded file sent  5/2010 "BoogieWoogie" (1-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of file??? WHAT software and WHERE do I find it to download?
    calico6

    Free VLC player for the Mac, check out the Icecast Radio Directory also
    http://www.videolan.org/vlc/download-macosx.html
    And if it's copy protected then
    http://www.telestream.net/flip4mac/
    If anyone is running 10.8. or later, then they might have to right or control click on the installer or app to "Open" to bypass Gatekeeper controls at least once, then it learns it's a ok to be trusted program.

  • Safari 7.0.6, using Adobe Acrobat 11.0.10, aren't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Safari 7.0.6, using Adobe Acrobat 11.0.10, isn't rendering pdf files in the Print Preview screen.  Additionally, only a single, blank page prints for a multi-page pdf document.  Any ideas?

    Figured it out.  It had nothing to do with the software levels of Safari or Adobe Acrobat.  Here's the fix:
    Open Finder/Applications
    Search "Internet Plug-Ins"
    Move any Adobe plug-ins to the trash
    Quit Safari
    Launch Safari
    Your pdf document should now render in Print Preview and print properly.

  • An error occurred during the installation process: error occurred while installing additional adobe

    I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. 

Any one else with same issue? 

Trevor

    These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
    Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
    If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

  • Installing additional Windows 8 on the second, non system, hard drive

    GE60 2QE Apache Pro (128GB SSD System + 1TB 7200rpm Data)
    1 May i create a bootable primary partition on the 1TB hard disk
      and install additional Windows 8.1 on it ?
    2 Will it affect MSI's System Recovery in any way ?
    3 Would it affect the original windows 8.1 installed on the SSD ?
    4 Should i set/tweak anything in the BIOS for the installation ?
    5 Am i asking the right and/or the whole questions ?
    6 Am i missing something ?
    Thanks

    The following answers are based on my past experience, but I personally didn't set up dual systems before. So they're just for your reference.
    1. Yes.
    2. No. The MSI's system recovery image is in the hidden partition. Unless you delete that partition, installing new OS won't touch it.
    3. Yes, because you are about to install dual copies of Win 8.1.
    4. No need to set anything in BIOS.
    5. Can't answer.
    6. Won't know until you actually start this project.

  • Install additional ICC Profiles

    I cannot find how to install ICC profiles other than the provided defaults of ProPhoto, Adobe RGB and Adobe sRGB. Can someone please tell me how to install additional ICC profiles.
    Thank you,
    Jim Palik

    The Camera Calibration profiles (Adobe Standard, Camera Neutral, etc) are camera profiles developed by Adobe through their internal camera-calibration process for each new camera.  You can make your own Camera Calibration profiles with the DNG Profile Editor and a X-Rite Color Checker standard color target. 
    The ICC profiles installed on your system are output profiles developed by mostly others that are not related to your camera.  The internal profile LR uses for processing is a variant of the large ProPhotoRGB profile with a different gamma.  LR is not like Photoshop where you can change the work space profile if that’s what you mean.

  • After Effects was unable to install additional file formats and effects

    ... Please reinstall from the original installer with a serial number."
    The title and first line of this post are the error I receive when I open After Effects CS3. All of the CC effects are missing, as well as content for Encore, which is also part of Master Collection (the suite I have), so it must be an Master Collection error. Does anyone know where I can get the addtional content and the installer?

    The cached files would be in C:\Program Files\Common Files\Adobe\Installers in one of the directories with the funny cryptic numbers as their name. Since the archives are protected by the install key, you will have no way to extract the files manually, though. I tend to think that it is indeed the MC trial that is giving you troubles. Did you run the CS4 Clean Script when you uninstalled it? If not, that might explain it, even more so when the trial timed out. Certain features will then be locked forever after, unfortunately. Only uninstalling, running the clean script and then reinstalling with the serial will give you the full features then. Also download the manual update packages for After Effects, Premiere Pro, Encore and Adobe Media Encoder from the Download section. Installing those may also fix that problem since it should make the apps install additional MPEG support. As another option, you might try to create a new user account with administrator rights and launch AE. Sometimes this also works, since it creates a new user branch in your registry and just ignores existing info for some stuff which may make the post-install install kick in and finish its work.
    Mylenium

  • Can't install additional content

    I installed OS X Yosemite and installed Logic Pro X. Logic installed fine and I tried to download and install additional content. I got done download all additional content and it stopped installing. I have no idea how to get the additional content. Is there anybody can help me out?

    Check the Additional Content Dialog Window to check all the content truly has been downloaded.. If not, check the stuff that hasn't downloaded and try again... following the tips in this User Tip..
    https://discussions.apple.com/docs/DOC-6422

  • After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity. Right before i installed additional content I was working on a project, and everything was OK.

    After downloading and installing additional content, no sound will play. Logic has no connection to sound library. No level meter activity.
    Right before i installed the additional content I was working on a project, and everything was OK. What is wrong. How do I make Logic reconnect to the instrument files?

    Whitelab Records wrote:
    So, 20 views and nobody's anybody the wiser?
    A small update to this issue....
    I have been trawling the forums to find an answer but to no avail...
    And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
    Same problems.....everything is audible in audition but nothing plays on playback.
    Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
    To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

  • How to install Additional Software Units or Usage Types in an Existing SAP

    Hi.
    We have a Netweaver 7.0 EPH1 with JAVA, EP and EPC intallation,but i need install additional usage type BI JAVA and NWDI.
    Copy the downloaded SCAs in /usr/sap/trans/EPS/in and when execute JSPM - option Additional usage type installation,  this not show usages type .
    according to the installation guide, this is the procedure.
    please help me.
    Thanks very much.
    Regards,
    Jhon Jairo

    Hi,
    Once you have correctly extracted and put the files in /usr/sap/trans/EPS/in, you need to run JSPM and select the option of additional usage types.
    Next, select the desired stack from the inbox. Click Next.
    JSPM shows the currently installed usage types and those of the new usage types in the stack, which are part of the active product on the system and all of their dependencies are fulfilled. They can have different status:
    Available u2013 the usage type is already active in the system. These usage types are automatically skipped.
    OK u2013 the usage type can be installed on the system. Specify whether to install or skip the usage type in the Action column.
    Revise u2013 the usage type cannot  be installed on this system. Click the Show Details button for more information. These usage types are automatically skipped.
    Not Supported - the usage type is not supported by JSPM.
    Can you tell us what is the status of the usage types visible to you? Are the new usage types having a different status or are they not completely visible at all? If that is the case, you may want to check whether the files that you have downloaded are correct or not and also check whether these are correctly extracted and placed in the right folder.
    Regards,
    Shitij

  • How to install additional dialog instance on a separate host in unix?

    Hi Friends,
    We have BW 3.5/oracle on AIX. Any body can help me'how to install additional abap dialog instance on a seperate AIX host'?
    Any help would be appreciated
    Thanks,
    Mohan

    You'll need to install a Dialog or Application server...
    You can find the instructions on how to install an application server for BW at SAP MArketplace.
    Go to https://websmp205.sap-ag.de/instguides -> SAP NetWeaver -> Release 04 -> Instalation -> SAP BW
    Hope this help!
    Juan Reyes

  • How to Install Additional Font

    Hello I'm BB & CB additive user and need help from Team Blackberry forum.
    Currently, Myanmar Language is not included in any of the BlackBerry version.
    What I would need is to install the font which can read Myanmar language.
    For example - Zawgyi-one.ttf which we can install on windows.
    I do not require to have a full language pack at this moment as it is a huge things to process.
    I just need to install font so that I can read Myanmar Font on Website.
    Is there anyone who have experience with installing additional font or anyone who know the similar post, please do provide a link.
    Thanks in advance.
    Thet Naung
    Solved!
    Go to Solution.

    Finally, I can install Burmese (Myanmar) font on my BB by using FontCollection. You can download FontCollection from Crackberry App Store http://software.crackberry.com/product.asp?id=305439&n=FontCollectionor or Blackberry App Store http://appworld.blackberry.com/webstore/content/22413?lang=en With version 2.4, two fonts are already included with the tag burmese (Zawgyi-one and Myanmar3)
    It is just 0.99USD and it is really great. you can add more font of your choice.
    Thanks FontCollection

Maybe you are looking for