Installing .air file on osx Mavericks keeps asking for installation package

After upgrading to OSX Mavericks and Upgrading to Adobe CC I'm having trouble installing .air files.
I'm working on OSX Mavericks 10.9.1
I have built an Air application with the Air4.0 SDK in Flashbuilder 4.7 and packaged a release build as a signed Air Package.
When I try to install it by double clicking the .air file , the Air Application Manager Starts but asks for an Installation package instead of using the package I just doubleclicked.
Any ideas how to solve this?
kind regards
Patrick

Hi
I never had Air 3.8 installed on my machine (after a clean install of osx mavericks). Only 3.9 4.0beta and now 4.0 release.
Even now that I reinstalled 4.0.0.1390 I'm not able te uninstall. It still give an "already installed message)
The Package insttaltion problem occurs with any .air file, so for instance even the air SettingsManager.air from the adobe site.
It's probably some hickup with my machine, but I don't know where to look anymore.
I'm not sure what you mean by the app.air file.
I have sent a a simple .air file to your mail address.
Oddly enough when I double click any .air file (and the "select installation package" window appears) and then doubelclick the .air file again from the finder,
the air installation window does appear behind!! the "select installation package" window ( but I can't click it ).
So it seems that, when first opened, the Adobe AIR Application Installer doesn't receive the file path of the .air file that was clicked.
Best Regards
Patrick

Similar Messages

Why does mavericks keep asking for my login password?

why does mavericks keep asking for my login password?

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

HT201303 I want to install a free app but it keeps asking for my credit card details

I want to install a free app but it is asking for credit card details. I don't understand. Can someone please help thanks

You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps

Downloading OSX Mavericks is asking for password?

On downloading OSX Mavericks it is now asking for the administer password yet my iMac was set up from the shop without an administer password, any ideas?
Thanks
dj30

OK guys have just read the previous questions & answers on this so will now go set up admin password & take it from there, fingers crossed!!

Installing .air file on Windows 7 64-bit

This batch command works in XP and in Windows 7 32-bit, but not in Windows 7 64-bit:
@echo off
REM
REM Set location to install to. (This dir must exist or install wont work!)
REM
set INSTLOC="c:\producthelp"
REM
REM Install help.
REM
AdobeAIRInstaller.exe -silent -eulaAccepted -location %INSTLOC% "Product Help.air"
(product name replaced with Product.) We are using the latest (today's) AdobeAIRInstaller.exe. We have tried using identical syntax to install other .air files from the Adobe site; they did not install either. Is there something simple we're missing here? Is there a known issue with installing .air files on 64-bit Windows 7? I couldn't find one at this site.

I think the reason you have had no reply is that no one has an answer. The only thing I can think of is to ask if the AIR file installs if you run it normally rather than from a batch file. If it does, then you know where the problem is but I cannot help you with that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

My mac keeps asking for a password when I try to install adobe flash player and even with the hint I

My mac keeps asking for a password when I try to install adobe flash player. Even with the hint I'm not getting it and also tried uninstall and the same thing occurred.

It's referring to the MAC password that you have setup.
A software prompts for a password only when there are restrictions set on the user account for unauthorised access to system files and folders.

I have Flashplayer 11.6.6 installed. Yet the pop-up keeps asking me to update.

I have Flashplayer 11.6.6 installed. Yet the pop-up keeps asking me to update. How do I tell it the player is already installed?

My operating system is Mac OSX, version 10.6.8. I use Safari, version 5.1.8. I realize the latest version of Flash is 11.6.602, but when I typed my question to you, I could only remember 11.6.6. It was 11.6.602.180 that I had tried to download. and thought I did download and install, until the pop-up said I need the latest version of Flash. Unless I try again, I can't get the screen shot of the pop-up. I will try after the holiday to send you that.
Thanks,
Mary

After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
before the upgrade, i could open time machine without the need for having the back up disk plugged in.

Ok. I got it to work, sort of....
As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

Since upgrading to OS 10.8.5 login keychain corrupted keeps asking for password for OSX, mail and Safari. Solutions?

Ever since upgrading to OS 10.8.5 login keychain corrupted; keeps asking for pasword tor OSX, mail and Safari. Help!

Have you tried opening Keychain Access and running Keychain First Aid (under the Keychain Access menu) on the login keychain?

I have iPhoto '09 v 8.1.2 and it will not install v9.2.1 that i downloaded. Keeps asking for me to have v9.0 or higher. Any ideas please?

Hi, I have iPhoto'09 v8.1.2 (424). I have downloaded v9.2.1 update and it will not install.
Keeps asking for me to have v 9.0 or later. Now i have downloaded 9.1update plus 9.1.3 and they will not install either.
Do i need 9.0 and if so where do i get it? THANKS nomadreg

No, iLIfe is a suite of applications: iMovie, iPhoto and GarageBand (earlier versions of the suite also contained iDVD ad iWeb).
Regards
TD

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Keeps asking for rpt file when executing store procedure

Hi all,
  I have coded an standard stored procedure but when I execute it, Management Studio keeps asking for .rpt file to save the results. I am using Enterprise 2008 R2.
This is the code:
USE [mydatabase]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[usp_chart](
@parameters)
AS
BEGIN
SET NOCOUNT ON;
DECLARE @query NVARCHAR(4000)
   DECLARE @total INT
   DECLARE @strDescriptor NVARCHAR(4000)
   DECLARE @dsvalues NVARCHAR(4000)
   DECLARE @strCache NVARCHAR(2000)
   SET @strDescriptor = dbo.udf_chart_derived_descriptor_intotemp(@derivation_Id)
SET @dsvalues = dbo.udf_chart_derived_dynamic_query_fortopn( @derivation_Id,
   @cache_Id,
   @topn,
@flt_customer_Id,
@flt_user_Id,
@flt_datefrom,
@flt_dateto,
@product_Id
   SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = ' + @cache_Id +
' ORDER BY g.Position'
   IF @strFilter is null
   BEGIN
SET @query = @strCache + ';' + @strDescriptor + ';' +
'DECLARE @total INT;' +
@dsvalues +
'SELECT @total = COUNT(*)
FROM #T_Condition;
SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100
FROM #T_Condition c
GROUP BY c.Condition_Index';
   END
   ELSE
   BEGIN
   DECLARE @sqlfilter NVARCHAR(2000)
SET @sqlfilter = dbo.udf_chart_dynamic_query_filter_fortopn(@strFilter,@product_Id,@topn, @cache_Id)
SET @query = @strCache + ';' +@strDescriptor + ';' +
'DECLARE @total INT;' +
@dsvalues +
'SELECT @total = COUNT(*)
FROM #T_Condition;'+ @sqlfilter +
';SELECT c.Condition_Index, ROUND(COUNT(*)/CAST(@total as float),2)*100
FROM #T_Condition c LEFT OUTER JOIN #T_NotWanted d
ON c.Data_Id = d.Data_ID
WHERE d.Data_Id is null
GROUP BY c.Condition_Index';
   END
   EXEC(@query)
   RETURN
END
When I execute:
DECLARE
@parameters NVARCHAR(4000)
execute usp_chart_derived_fortopn @parameters
it asks me for a .rpt file.
Why is that? I am not running a report.
Thanks

As other have said, you have set Results to File.
But since you posted your code, I had a look at it. I was not able to understand why you use dynamic SQL. For instance, this:
   SET @strCache = 'SELECT top ' + @topn + 'PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = ' + @cache_Id + ' ORDER BY g.Position'
Can be written as
SELECT top (@topn) PERCENT g.Supplier_Id Supplier_Id
INTO #T_CacheTopN
FROM T_CacheSupp g
WHERE g.Cache_Id = @cache_Id
ORDER BY g.Position
If you can avoid dynamic SQL, your code becomes easier to maintain, and less vulnerable for nasty surprises.
And if you use dynamic SQL, you should use sp_executesql and pass parameter values as parameters instead of inlining them.
Erland Sommarskog, SQL Server MVP, [email protected]
Links for SQL Server Books Online:
SQL 2008, SQL 2005 and
SQL 2000.
(Just click the link you need.)

When installing creative cloud on osx I keep getting prompted to download a new version

when installing creative cloud on osx I keep getting prompted to download a new version which upon trying to install prompts me to download again. I recently used migration utility to move everything to a new box.

Mac migration does not always work with Cloud programs
Uninstall... run the Cleaner... Restart your computer... Reinstall
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

Vista Service Pack 1 wont install. Update keeps asking for it.

Installed Service Pack 1 with Windows Update. Update History says it was successful but it is not in the Installed Updates and Windows keeps asking for SP1 over and over. Vista SP3 is there.
I have tried to install it directly, I closed all security programs and fire wall. I looked to see if there is any missing updates. I've restarted the computer. I have followed all the instructions on the support site.
Service Pack 3 is installed.
I just don't know what to do.
I have Vista Home Premium 32bit

Hi
To be honest I never had any problems with my Vista updates
The Vista updates automatically every time when Im online and when new updates are available
How did you try to update the Vista OS?
Did you download the SP1 firstly to HDD or did you run an automatic update?
If the automatic update does not work try to download the SP1 firstly and then start the update procedure:
The SP1 can be downloaded here:
http://www.microsoft.com/windows/downloads/default.aspx

Installing .air file on osx Mavericks keeps asking for installation package

Similar Messages

Maybe you are looking for