Installing BiApps for the 1st time
Hi All,
I'm brand new related the BI Apps question, but reading its documentation "Installation Guide for Oracle Business Intelligence Applications" at page 15 it's mentioned that BI Apps has prerequisites such as OBIEE and ODI. However, i'll have to install OBIEE in "Enterprise Install mode" and it installs WebLogic Server 10.3.5 and i'll have to upgrade to WebLogic Server 10.3.6 after installation of Oracle BI Applications is complete.
The question is : How can I upgrade my WebLogic Server version from 10.3.5 to 10.3.6 ? Is it a patch applying ? Where can I find this patch ?
Thanks in advance,
Regards
check this Installing and Setting Up Oracle BI Applications
Prerequisite to Running the Business Analytics Applications Suite Installer
Make sure you have met the following prerequisites before you run the Business Analytics Applications Suite installer:
The installer is a generic installer and requires JDK or JRockit to be installed. See Section 3.2.1, "Installing JDK or JRockit," for more information.
35 GB free disk space is required to run the Business Analytics Applications Suite installer. This disk space will be released after the installer finishes.
To run the Business Analytics Applications Suite installer:
Launch the Business Analytics Applications Suite installer by entering the following:
The Business Analytics Applications Suite installer displays the Welcome screen.
Platform
Command
Windows
In a command prompt:
setup.exe -jreLoc <Drive:\...\jdk or jrockit location>
Where jdk or jrockit location is the directory that contains the bin folder.
For example:
setup.exe -jreLoc C:\jdk
UNIX and Linux
./runInstaller -jreLoc <jdk or jrockit location>
Note: If you are running the installer on a Linux machine that does not have the file /etc/oraInst.loc, the Specify Inventory Location screen will display. For information about this screen, see Section B.1, "Specify Inventory Location."
open a new thread for new issues please
Similar Messages
-
I've installed iPhoto11 and when opening for the 1st time it says that needs to upgrade my library and it is doing this task since yesterday. Is this right??
No. Quit and try again. If that fails again,
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?
I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!
If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.
-
I got the new iPhone5 back in Dec, I hooked it up to my computer for the 1st time this wk. It deleted all new data added since Dec (notes,contacts,texts,pics, info added to apps) and reverted back to all my old data (literally uploaded all of my old texts and 1400 old pics and deleted anything new). How can I retrieve all the lost data?? Please help!!
SkyDaughter29 wrote:
My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes. I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need. It appears Apple does not sync the texts between the iphone and my MacBook Pro.
Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
Best of luck. -
Hi
I am encountering the error M8035 (" No Suitable Items found for PO ") while I am doing MIRO for the 1st time against service POs (item cat - D) in a company code.
in OMSY the period opened for the company code is : Current 06 2014 previous 05 2014
This was done because Go Live date for the new company code is 01.06.2014.
I am doing test in the test client now.
I have created a vendor on today's date
I have created a service PO on today's date (GR, GR Bsd IV, IR, Serv Bsd IV - these indicators are marked in the PO)
I have created service entry sheet on today's date (acc assignment - K, G/L a/c was determined from the Material Group maintained in the PO)
I have accepted the service entry sheet on 04.05.2014 (FI doc posted against the matl doc - KBS to WRX on 04.05.2014)
I am trying to do the MIRO in the same company code on 04.05.2014.
While I am putting the PO and its line item in MIRO item and pressing enter system shows the above info msg and nothings is appearing in MIRO item.
I have tried to do MIRO against service entry sheet also - same things happened.
I have tried selecting Goods Service Item+planned del cost in MIRO - nothing changed.
I have tried posting MIRO against a non service PO (acc assgnment K, Item cat - BLANK) after doing MIGO in the same company code in the same date- PO is appearing in that case.
FI people are able to post FB60 manually for the vendor I am using in the PO - so there is no problem in the vendor also.
I have gone through the scn post related with the topic, unfortunately none of them solved my problem.
Please help
Thanks
Sanjib...Can you post a screen shot for PO history ?
Regards
Dev -
'BAPI_GOODSMVT_CREATE' takes more time for creating material document for the 1st time
Hi Experts,
I am doing goods movement using BAPI_GOODSMVT_CREATE in my custom code.
Then there is some functional configuration such that, material documents and TR and TO are getting created.
Now I need to get TO and TR numbers from LTAK table passing material documnt number and year, which I got from above used BAPI.
The problem I am facing is very strange.
Only for the 1st time, I am not finding TR and TO values in LTAK table. And subsequent runs I get entries in LTAK in there is a wait time of 5 seconds after bapi call.
I have found 'BAPI_GOODSMVT_CREATE' takes more time for creating material document with similar issue, but no solution or explanation.
Note 838036 says something similar, but it seems obsolete.
Kindly share your expertise and opinions.
Thanks,
AnilHi,
please check if some of following OSS notes are not valid for your problem:
[Note 838036 - AFS: Performance issues during GR with ref. to PO|https://service.sap.com/sap/support/notes/838036]
[Note 391142 - Performance: Goods receipt for inbound delivery|https://service.sap.com/sap/support/notes/391142]
[Note 1414418 - Goods receipt for customer returns: Various corrections|https://service.sap.com/sap/support/notes/1414418]
The other idea is not to commit each call, but executing commit of packages e.g. after 1000 BAPI calls.
But otherwise, I am afraid you can not do a lot about performance of standard BAPI. Maybe there is some customer enhancement which is taking too long inside the BAPI, but this has to be analysed by you. To analyse performance, just execute your program via tr. SE30.
Regards
Adrian -
guys, my itunes songs and folders disappeared? it's as if i went to itunes for the 1st time ever. i had 3,400 songs! No longer there!?!?!?!? PLEASE HELP!!!
Um... this is an Xserve forum. Kindly transfer to the appropriate forum.
-
guys, my itunes songs and folders disappeared? it's as if i went to itunes for the 1st time ever. i had 3,400 songs! No longer there!?!?!?!? PLEASE HELP!!!
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Using dbms_job for the 1st time
I am attempting to use dbms_job for the 1st time and doing some test, but I can't get it to run.
Connected to: Oracle Database 10g Release 10.1.0.2.0 - Production
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Mar 1 10:36:18 2006
I have alter system set job_queue_interval = 10;
When I tried
SQL> alter system set job_queue_interval = 10;
alter system set job_queue_interval = 10
ERROR at line 1:
ORA-25138: JOB_QUEUE_INTERVAL initialization parameter has been made obsolete
my code is as below.
1 create or replace procedure d1 is
2 v_job_no binary_integer;
3 begin
4 DBMS_JOB.SUBMIT(
5 v_job_no,
6 'test_dbms_job',
7 trunc(sysdate,'hh')+1/24,
8 'trunc(sysdate,''hh'')+2/24');
9 commit;
10* end;
SQL> /
Procedure created.
SQL> exec d1;
BEGIN d1; END;
ERROR at line 1:
ORA-06550: line 1, column 107:
PLS-00103: Encountered the symbol "END" when expecting one of the following:
:= . ( @ % ;
The symbol ";" was substituted for "END" to continue.
ORA-06512: at "SYS.DBMS_JOB", line 79
ORA-06512: at "SYS.DBMS_JOB", line 136
ORA-06512: at "PMC_ERP_PROD.D1", line 4
ORA-06512: at line 1
Any clues??sorry, when I cut and pasted this I but in
job_queue_interval in twice.
I alredy have the following set also.
SQL> alter system set job_queue_processes = 4;
System altered.Well, it's good...
And what about semicolon ? ;-) -
Quality Inspection for the 1st time Receive of Batch
Hi all.
My requirement is just to do the quality inspection when the Batch(MCHA-CHARG) is received in the first time in MIGO.
No quality inspection is required for next & consequtive goods receive for the same batch.
for the 1st time receive, the stock will go to quality inspection stock for any batch of a material. From the next time , the stock will go directly to unrestricted stock without quality inspection. is it possible? plz advice.
Thanks
pabiHi Pabi,
I am not sure if this will help you, but here are the three options that you might want to consider:
- Source inspection. The idea here is that an IL is created for a purchase order prior to GR. All subsequent receipts for this PO can be configured to skip inspection.
- Control if insp. lot in material master (insp. set-up). In this case, the system will not create new insp. lot, if there's already one open for the same batch - it will merely add the qty of the new GR to the same open insp. lot.
- With dynamic modification you can let the following receipts of the same material from the same vendor to go without QI, but you can't fine-tune it by batch.
I know this is not the same what you want, but I can't recall at the moment a function that will satisfy your requirement exactly.
BR
Raf
Edited by: Rafael Zaragatzky on Aug 7, 2011 4:32 PM -
Battery charging for the 1st time
Hi All,
I have bought a new nokia E51 & wanted to know whether is it necessary for the 1st time to charge the battery for 8-10 hours continuously. So, that the battery could get a long life.Well have a look at this > http://www.batteryuniversity.com/parttwo-34.htm
It says nothing about the first charge but I advise you just charge it untill it is full and unplug the charger
and for the rest of the battery's life Here's what they have to say:
Avoid frequent full discharges because this puts additional strain on the battery. Several partial discharges with frequent recharges are better for lithium-ion than one deep one. Recharging a partially charged lithium-ion does not cause harm because there is no memory. (In this respect, lithium-ion differs from nickel-based batteries.) Short battery life in a laptop is mainly cause by heat rather than charge / discharge patterns.
Batteries with fuel gauge (laptops) should be calibrated by applying a deliberate full discharge once every 30 charges. Running the pack down in the equipment does this. If ignored, the fuel gauge will become increasingly less accurate and in some cases cut off the device prematurely.
Keep the lithium-ion battery cool. Avoid a hot car. For prolonged storage, keep the battery at a 40% charge level.
Consider removing the battery from a laptop when running on fixed power. (Some laptop manufacturers are concerned about dust and moisture accumulating inside the battery casing.)
Avoid purchasing spare lithium-ion batteries for later use. Observe manufacturing dates. Do not buy old stock, even if sold at clearance prices.
If you have a spare lithium-ion battery, use one to the fullest and keep the other cool by placing it in the refrigerator. Do not freeze the battery. For best results, store the battery at 40% state-of-charge.
Show your appreciation. Hit that kudos button real hard -
I am installing CS6, for the first time, on a Mac, from a CD. I have a valid serial number that I just obtained. When I enter the serial number, it is not validated and I cannot continue.
Error "The serial number is not valid for this product" | Creative Suite
-
How do get past the credit card payment when I review my account for the 1st time?
K I've setup a account to use itunes, I even have 2 itunes gifts cards ready to go.
I'm reviewing my account for the 1st time right now.
what I want to know is:
"How do continue without entering a valid credit card payment?"Come on people. There has to be someone who can help out or what....
-
I am trying to logon to icloud for the 1st time on my pc, everything is setup, but it comes up with 'you cant sign in because of server error'
Hi tracey,
It sounds like you are having issues with connecting to the iCloud servers, a frustrating situation to be sure. I would suggest troubleshooting using the steps in this article -
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Thanks for using Apple Support Communities.
Best,
Brett L
Maybe you are looking for
-
No Further Confirmation Expected- PO error in process
Hi All, SRM 5.0 ,ECS We are trying to close a PO. When we check' No Further Confirmation expected 'on SRM PO and after approval, PO errors out saying Error in process. I looked up RZ20, Its saying Please specify valid account assignment. Any inputs
-
Acrobat pdfs created with Indesign CS3 cannot be searched
Our company uses Coldfusion (don't know anything about Coldfusion personally) to search pdfs of our magazine articles that we keep in an online library. Users can do keyword searches to find articles. Our system was created in about 1998. It worked f
-
How to design static information table
Hi gurus, I was trying to find a solution by googling etc but not sucessful. I am developing a mail letter report which will require a pretty word style table holding static informaiton. I can't find any to use HTML code. my current implementation is
-
I lost message tone and keypad and keylock tones in my iphone 4
i lost message tone and keypad and keylock tones in my iphone 4
-
I know that there will be a new ACR when LR is released to make them compatible. But, will that also make ACR compatible with existing images that have been adjusted in the Beta version?