Installing Blackfin Test Integration Toolkit

Hello
where can i find the necessary files (Blackfin Tookit.exe) to install this Toolkit for LabView Embedded Module for ADI Blackfin Processors board?
Are there further (free) Toolkits available for this board?
Best regards,
Johannes

The Blackfin test integration toolkit allows you to use LabVIEW on
Windows to connect to a board with an ADI Blackfin on it so that you
can control the Blackfin on the board. Using
this toolkit, you will be able to automate
the Analog Devices (ADI) VisualDSP++ development environment and
communicate bi-directionally to your Blackfin processor using
Background Telemetry Channels (BTCs). It's typically used by test or
design engineers who want to test their hardware or the C code running
on their Blackfin.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=EEBFA0D90A3C1C75E0340003BA7CCD71
Joel Sumner
NI-Shanghai

Similar Messages

DSP Test Integration Toolkit doesn't work with CCS4

Hello,
After good experience with CCS2 & DSP Tollkit I've got CCS4 from TI.
There is no connection from the toolkit to this CCS version.
Is there is new version of the toolkit or some support ?
Regards.
Vladimir

Vladimir,
What Version of LabVIEW and the DSP Module are you using?
This document in the LabVIEW help may provide some help:
Using the TI Code Composer Studio Toolchain with the DSK6713 Example Target (Microprocessor SDK)
This Tutorial on our website also talks quite a bit about the Code Composer Studio:
Connecting to Texas Instruments DSPs Using the LabVIEW DSP Test Integration Toolkit
Ben Sisney
FlexRIO V&V Engineer
National Instruments

NI LabVIEW DSP Test Integration Toolkit

hello.... i am 3rd year electrical engineering student @ RVCE banglore India, and i am doing a project on low power MP3 players using LabVIEW as a development platform and i have the support of DSK 6713 DSP kit by TI in my Dept Lab... but as a student i can't afford NI LabVIEW DSP Test Integration Toolkit for the interfacing of LV with DSP.. so.. if somebody is having NI LabVIEW DSP Test Integration Toolkit, i request them to kindly give me that software which is absolutely required for the completion of my project... thanks in advance...

Hey Saha,
We're really glad that you are interested in the DST toolkit, however, it is inappropriate for you to request that someone upload a piece of software that cost money. This is the equivalent of asking someone to do something illegal for you. That having been said, your school may have the software already. I would contact [email protected] to see if your school has a license.
Chris C
National Instruments
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Read Variable using DSP Test Integration Toolkit

Hi,
I am using LabVIEW DSP Integration tool kit to get some variable values from DSP code during run time. I am able to get symbol values if I am specifying symbol name as string input. I am expecting to read from LabVIEW code some global variable values, if i am giving variable name as string. I could not find any help over the same.
Any help to resolve the problem is highly appreciated.
Thanks in advance.
Vijay
Message Edited by 12345qwertt on 08-05-2008 03:20 PM

Hi 12345qwertt,
This toolkit is no longer officially supported by NI, but you can download the VIs that were included in this toolkit, and there are still resources available on NI.com.
NI LabVIEW DSP Test Integration Toolkit
LabVIEW DSP Test Integration Toolkit for TI DSP Manual
LabVIEW DSP Test Integration Toolkit Video Demonstration
I'm having trouble identifying the question in your post. Would you please elaborate?

"labview dsp test integration for TI dsp": not available

hi
i have been trying to locate this particular toolkit "labview dsp test integration for TI dsp",but it gives me error "no content available. i have been refering to this particular book that guides on how to use labview with TI dsp.
check chapter 9,section 2(ie 9.2).
http://books.google.co.in/books?id=f-rFsAwd3TAC&q=TMS320C6173#v=onepage&q=TMS320C6173&f=false
http://digital.ni.com/public.nsf/allkb/305E2B0DA391CD4786256D0C006EE31C
but i was goin through i found that this toolkit is maybe not anymore supported by NI.can some one plz let me know on how to interface my TI dsp like TMSC6713b etc nd burn progm on it using labview.

Debarati,
I did some more research into your issue and found out that unfortunately, NI no longer officially supports the DSP Test Integration Toolkit as seen here: http://zone.ni.com/devzone/cda/tut/p/id/5839
I also see that you located our example VI here http://zone.ni.com/devzone/cda/epd/p/id/4311 and that the VI asked you for a .pjt file that you could not locate in CCSv4. Being that we no longer support the DSP Test Integration Toolkit, your next course of action would be to contact TI and inquire what .pjt file corresponds to in the newest version of CCS. I hope TI can be of more help to you with this issue since, as I said before, we no longer support this toolkit.
My apologies,
Larry H
Applications Engineer
National Instruments

Install a Test/Dev instance for SAP MII.

Hi,
I want to install a test/development instance for SAP MII on my laptop [2 GB RAM].
Per my understanding, for this i would need set up SAP NetWeaver CE instance and deploy SAP MII 12.1 component.
I also want do some custom development & integration with SAP through MII to SAP ME.
As per Master Guide SAP MII 12.1.pdf, we need to Install SAP NetWeaver CE 7.1 EHP1 SP03.
Since its a test/development instance can i install [SAP NetWeaver Composition Environment 7.2 Developer Edition|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-eb95-aae0f777d4ab] and deploy MII.?
Or do i need to have some specific version of Netweaver CE.
Please let me know what are steps to install a Test/Dev environment for SAP ME/MII integration..
Please advice.
Thanks un advance.

MII 12.1 has not been validated on NWCE 7.2. And MII 12.2 is validated on NW 7.3, skipping NWCE 7.2. It may install fine, but you will most likely run into problems executing some of the functions and features of MII.
Regards,
Mike

Unit Testing / Integration Testing

Hi all
Can somebody provide links to SAP testing....
Can anybody define & write down the step by step details on carrying out unit testing, integration testing and user acceptance testing...How it is done..which systems..tools..test scripts / test cases etc

hi,
For all kinds of testing the first thing is to enumerate the scenarions i.e preparing a list of scenarions that need to be tsted. this wud include the test data and also the desired results. templates are provided by the consultants to the end users. thse templates have a description of the scenarios, the data used, the transacion codes, the docs generated and if the desired results were obtained. thse need to be certified by the concerned.
integration and unit tsting can be done on the same or different clients depanding on system landscape. user accptance testing is generally after the interfration tests have been satisfactorily conducted. different knds of users are asked to do the tests once their id roles and profiles are created. this phase shud be handled as if live production envirionment.
saurabh

Unit testing, integration and functional testing

Hello all,
I would like to know the difference between Unit testing, integration and functional testing. And also what are the testing tools that are more commonly used?
Thanks,
Maxx

Hi,
    Unit testing :
                A complete cycle of each module will be tested
                ie for PP Right from requirements to planned orders /production orders
                confirmation .
    Integration testing:
                Here cross module testing will be carried out.
                 ie PP and MM integration
                    After confirming production order a GR is made /billing is carried out
                    and delivered.
      Functional testing:
                This testing is carried out to see whether the system can with stand l the loads during processing by users.
                Stress test and volume test.
            Regards,
            nandha

Install of Report Generation Toolkit without Microsoft Office previously installed.

After installing "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" on a computer without Microsoft Office I noticed that the Report Generation VI palette does not include the "Excel & Word" specific VI's, even though I have "Excel & Word" installed. Is there any way to "activate" those VI's without installing "Microsoft Office?" If the answer is no and I do install "Microsoft Office" will those VI's become available on the Report Generation VI palette? Or will a reinstall of the "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" be required?
Message Edited by St. Pete SAIC on 06-17-2009 08:01 PM

St. Pete SAIC wrote:
After installing "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" on a computer without Microsoft Office I noticed that the Report Generation VI palette does not include the "Excel & Word" specific VI's, even though I have "Excel & Word" installed. Is there any way to "activate" those VI's without installing "Microsoft Office?" If the answer is no and I do install "Microsoft Office" will those VI's become available on the Report Generation VI palette? Or will a reinstall of the "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" be required?
Message Edited by St. Pete SAIC on 06-17-2009 08:01 PM
OK any question? Install the specific Office version and if that doesn't change the registery keys that NI is depending on reinstall the LV Add-on. Of course NI, software tool-kits check registered software! Why install a "for Office" package that is unusable or (worse from a litigation point) includes functionality for unlicensed or pirated "Office" installations. Again- "*xx For (R) Office xx*" means they have gone through some licensing agreement.
Jeff

How to install sound and vibration toolkit 8.5

Hello all, I have just started using labview and would like to run the "SVXMPL_Third Octave Analysis for Multiprocesor" example as an example for multithread programming, but I run into the issue that the "Sound and Vibration" toolkit is required before running the example. I have installed the labview 8.5. I have gone through the posed link and gone through the list of products installed in my machine (ControlPanel>Add and Remove Programs> National Instruments Software), but I couldn't find the "sound and vibration toolkit". I have tried to run the installation setup in order to add the toolkit. it looks like I have already installed all the available software. I don't know how I should install the toolkit. I appreciate on any comments on how to install the toolkit. I appreciate if you can help me on how to install "sound and vibration toolkit" in my machine.

Never mind. I got it.

How to install ADF Desktop Integrator on mac (using jdev 11.1.2.1.0)

Hi Everyone,
I got a requirement for my client where they want to use microsoft excel to upload/edit/delete content of one of our ADF application data and we are thinking of using ADF Desktop Integrator option for achieving this. I tried to install ADF Desktop Integrator from my Jdeveloper->Tools->'Install ADF Desktop Integrator' but this option got disabled on my mac. Is there any way to enable it or is it mac not compatible for ADF desktop integrator tool? Also most of my client team members are using mac and hence I cannot ignore mac option and switch to pc.
Any help or suggestions on this would be very help and appreciated.
Thanks,
Ravi N

Hi.
ADF Desktop integration relies on Microsoft .NET and Microsoft Internet Explorer; both are available on Windows only. Thus, ADF Desktop Integration is not available on Apple OS X.
Best Regards,
Frédéric.

Error when trying to install adf-desktop-integration.

Hi,
I developed an integrated workbook using the ADF Desktop Integration technology (JDeveloper 11.1.1.4.0, Microsoft Office 2007, Windows 7)
One of my users encountered an error when is trying to run the setup for the adf-desktop-integration.
The steps for his error are the following (he is using Windows XP and Microsoft Office Professional Plus 2007):
- Enable .NET Programmability support from Office installation
- Run the setup file for adf-desktop-integration. The following error appears in a popup:
The following solution cannot be loaded because Microsoft Office support for the .Net Framework 3.5 is not installed: adfdi-excel-addin-runtime.vsto.
For more information, see http://go.microsoft.com/fwlink/?LinkId=135965
If someone else encountered this error and found a solution please let me know.
Thank you,
Alex.

Hi,
The problem is that my user already have installed on his computer the .Net Framework 3.5 SP1.
In the section "3.5 Installing ADF Desktop Integration" from the link http://download.oracle.com/docs/cd/E24382_01/web.1112/e16180/inst_conf_dev_env.htm#CHDHJIIG is specified that when the setup tool is run, the following software are installed:
1. Windows Installer 3.1
This software I suppose is already installed or the setup tool managed to install it, otherwise I should have an explicit error.
2. Microsoft .NET Framework
This software .Net Framework 3.5 SP1 is already installed.
3. Microsoft Visual Studio Tools for Microsoft Office
My user already has Visual Studio Tools for the Office system 3.0 Runtime
Now lets take a look on the same link at the section "3.2 Required Oracle ADF Modules and Third-Party Software". Because my users are using only the Runtime edition of ADF desktop integration they don't need JDeveloper or an Application server.
Taken in consideration the section "Installing the Runtime Edition of ADF Desktop Integration" from your link, my users are using the adfdi-excel-runtime-client-installer.zip (this file is provided by me and is taken from my installation of Oracle Middleware-11.1.1.4.0).
Thank you,
Darie.

Unable to install the "Maven Integration for Eclipse" plugin

I am having trouble trying to install the "Maven Integration for Eclipse" plugin.
The tab Installed list the plugin with an Install button activated.
Then when I click on Install, I get the following log:
Your original request has been modified.
"m2e - slf4j over logback logging (Optional)" is already installed, so an update will be performed instead.
"m2e - Maven Integration for Eclipse" is already installed, so an update will be performed instead.
Cannot complete the install because one or more required items could not be found.
Software being installed: m2e - slf4j over logback logging (Optional) 1.4.0.20130601-0317 (org.eclipse.m2e.logback.feature.feature.group 1.4.0.20130601-0317)
Missing requirement: m2e logback configuration 1.4.0.20130601-0317 (org.eclipse.m2e.logback.configuration 1.4.0.20130601-0317) requires 'bundle org.slf4j.api 1.6.2' but it could not be found
Cannot satisfy dependency:
From: m2e - slf4j over logback logging (Optional) 1.4.0.20130601-0317 (org.eclipse.m2e.logback.feature.feature.group 1.4.0.20130601-0317)
To: org.eclipse.m2e.logback.configuration [1.4.0.20130601-0317]
I am running FlashBuilder 4.6.
I have Eclipse Juno also installed.
I am running on Windows7.
I tried to uninstall both Eclipse and FB and just reinstall FB but still I have the same problem.
Any help would be greatly appreciated?

Â Hi Senthil
The onlyÂ way for you to get CR4E is to download it from our web site.
I just made a try, just to check ifÂ our web site was having any troubles today, and it worked fine, so I assume you might be experiencing some troubles on your side with your internet connexion.
I haveÂ successfully downloaded the All-In-One zip file of CR4E, that you can find there :
Â http://diamond.businessobjects.com/node/433
I suggest you give it some more tries.
Thank you for using CR4E.
Thierry (BusinessÂ Objects)

Can't install Oracle Test Manager

Hi,
I’m trying to install Oracle Test Manager and I have got an error message on XE installation step: “installation of OracleXE failed.”
The first line of log file says : “OXE_Detect: No OATS installed version found. Detecting external OXE version.
However there is no trace of XE, neigther in Program Files nor in Services. Only the following Oracle services exist:
•     Oracle Application Testing Suite Helper Service (Open Scipt) =>Running
•     OracleMTSRecoveryService
•     Oracleora9i_homeClientCache
Is there anything to remove in Registry or somewhere else?
Thanks by advance for your help
Edited by: user8891760 on 4 juin 2010 00:21

Hi,
You can validate OID installation through 'opmnctl' and/or 'ldapbind'. You can access 'Oracle Directory Services Manager' through a browser using the url -
'http://<host>:<port>/odsm/faces/odsm.jspx'.
Here is a link which shows screenshots of the overview of 'Oracle Directory Services Manager'.
-- Pramod Aravind

How Can Install a Test DB when SAP is all ready Installed

Hi, friends, I have a little trouble, I want to install a Test Data Base for other Country, but I can use my actual SAP Install.
Somebody know What I need to do for this
Thanks

Yep, I know how, that's easy, the option is in windows - add remove programs, you select modify/remove, and then choose modify, and the you know the rest...
Thanks....
P.D. My chief found them the solution...

Installing Blackfin Test Integration Toolkit

Similar Messages

Maybe you are looking for