Installing Boot Camp after Parallels

I have installed Parallels 4.0 but I need to install Boot Camp (to be able to watch iPlayer via my XBox). Is it safe to just install Boot Camp using my Windows XP disc (I have plenty of hard disc space) or do I have to uninstall Parallels and reinstall it later ?

blueinsmoke wrote:
Thanks for the re-assurance Fortuny ! One follow-on question if I may (and apologies for my total ignorance). Will installing XP again on the same machine really cause the automatic loss of XP on the Parallels partition ?
Hi,
yes it will.
Due to the fact that you run the same XP license twice on 'different hardware components' (once native with BootCamp and once virtualized with Parallels), XP thinks that you are running it on two different computers.
The link I gave is meant to compensate that, but I myself haven't tried it.
Regards
Stefan

Similar Messages

  • For my purposes, should I install Boot Camp or Parallels?

    I have a three year old iMac running Mavericks with 8 gigs of RAM.  I want to take a class that teaches 3D design using 3ds Max.  If I do I'm going to need to use a Windows platform to run the software.  Never having used either one, would I be better off using Boot Camp or Parallels?  Also, I haven't used Windows since I had Vista installed on a Dell laptop, which was a major proponent for my switch over to a large Mac.  But I hated Vista!!!  Now I believe they're up to Windows 8.  Is Windows 8 better than 7?

    Windows 7 is better than windows 8 for many reasons but either are workable.   I prefer parallels when I need windows (in fact I don't have a bootcamp partition) because I like to have access to my mail, calendar, iTunes, ...  If your application will work with parallels then I would go parallels+win7.  It won't be as fast as bootcamp but since it is a class, maybe speed isn't your top concern.
    win7 cost money
    parallels cost money
    bootcamp is free
    good luck.

  • Installing Snow Leopard but also Boot Camp or Parallels

    I have a 2006 MacBook (Intel, core duo) and have a 320 gb HD, 2 gb RAM, running 10.5.8.
    I'd like to install Snow Leopard but also would like to partition my HD and install Boot Camp (or Parallels 4.x - I have that version, fully paid etc. but not version 5 of Parallels. Or should I move to Parallels 5 if I move to Snow Leopard?)
    I have a full bootable backup (2) on FW400 LaCie External HD's. I have the SL Original DVD.
    What is the best way to do this? At present I have 60 gb free space (about 20% of the 297 gb formatted total space available).
    Thanks for any comments! Oh, yes - I'm anticipating a new MacBook Pro 13" any time now (Thought the new ones would be out by now!) - Well it will come with SL installed; and I will order one with a 500 gb HD (or larger if available then). Can I migrate my current MB data and files to the new MacBook using migration assistant? But what if I want a partition for BootCamp and Windows (XP likely as I have that)--? Should I partition the new MBP HD first (can I partition it without erasing everything?
    Best regards,
    Steve Schulte
    Sunday 14 March 2010

    Frankly, were you to run Parallels 5 you should have more RAM installed, but your model cannot support more than the 2 GBs you have installed now. You would be better off running Windows via Boot Camp on that machine. However, the new computer will have 4 GBs of RAM installed so it is better suited to running Windows via Parallels. And, yes, if you run Snow Leopard you need Parallels 5.x both for compatibility and performance reasons.
    Open Boot Camp Assistant and click on the wide button on the left to print out the documentation. Read it carefully before using Boot Camp Assistant. Yes, you partition the drive without erasing it, but you can only have one Windows and one OS X partition on the same drive. Otherwise it makes no difference when you use Boot Camp.
    Your XP must be a retail installer with SP2 and only the 32-bit version. You cannot use an OEM installer that came with another computer.

  • Installing Windows 7 RC1 with Boot Camp AND Parallels?

    I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
    I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
    If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

    Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

  • Black screen after installing Boot camp Win7 on iMac 27 late 2009

    I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).
    I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.
    I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.
    I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.
    I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

    I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
    I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
    If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
    I don't know what links you have so i'll just include everything:
    Installing boot camp on a Late 2009 iMac:
    http://support.apple.com/kb/TS3173
    Direct link to Late 2009 iMac-specific Windows drivers.
    http://support.apple.com/kb/DL995
    I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
    Hope this helps.

  • Blue screen of death after installing Boot Camp on Windows 7

    Hello and thanks for the help!
    Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
    Help!?

    Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
    There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
    You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • Installing windows xp on boot camp and parallels??

    Hi all,
    I am using a Macbook with a 2GHz Intel Core 2 Duo with 4GB of memory on Mac OS X 10.5.8. I currently have Parallels 5 installed running Windows XP. I need to run Windows off of Boot camp according to the support from the program I am trying to run "Chief Architect X3" as I need to utilize the video card "natively" I believe the word was. Parallels is unable to recognize and use the card properly for this program. So my question is two fold does anyone know if there is a patch that allows Parallels do this? Or can I install Boot Camp on my machine as well with Windows XP so that I can utilize the video card for this program. Do I need to uninstall my Parallels virtual machine? Also programs that are installed via Windows, if I install Boot Camp/Windows and delete my virtual machine/Windows do I need to reinstall those programs? Any and all information is GREATLY appreciated!
    Thanks in advance,
    Laura

    Upgrade to Parallels 6, new build just out. And ask on their forum.
    You have to install XP natively first and then enable under a VM to activate properly.
    Everything will need to be installed. there are few ways to get a VM to a "native" hard drive partition. And Windows activation is another issue.

  • How to uninstall parallels prior to install boot camp

    I am using IMac with latest software up-date. In order to install boot camp for some specific windows applications ( change from XP to 7)
    I have to uninstall parallels. How shall I proceed?
    Thanks for any help.

    The following from the Parallels support site may help:
    Parallels Desktop 9: http://kb.parallels.com/en/116992
    Links to uninstall instructions for other versions are near the top of the above link.

  • How to create extra partitions for windows 7 after installing boot camp

    hello
    i am pretty new at imac so bare with me and i really need help.
    IMAC
    OS X version  10.9.5  ( i think its os X mavericks ??)
    iMac 21. inch  , Late 2013
    iMac model identifier  iMac 14,1
    i installed boot camp windows 7  and it works perfectly, after i tried to create two partition using disk utility  for windows 7 (ms-dos) format because i really want to separate my files on other partition instead of everything on Boot Camp drive.  after i restart choosing windows OS i cannot go back to windows 7.
    i hold option on the keyboard but does not show window 7 so i went back to Apple ox s , found my boot camp hd on the desktop with files in it.  checked boot camp assistance showing 
    " The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. "
    i read alot of article about but i don't seem to understand much about
    i understand alot of people created these kind of topics
    please if someone can help me solve this problem again
    i only want an apple os ,  boot camp for windows 7  and 2 extra partitions for storage  ,  my hard drive is 1TB
    thank you

    Last login: Mon Feb 16 16:11:46 on console
    YLFs-iMac:~ ylf$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *8.0 GB     disk1
       1:                 DOS_FAT_32 WININSTALL              8.0 GB     disk1s1
    YLFs-iMac:~ ylf$ diskutil cs list
    No CoreStorage logical volume groups found
    YLFs-iMac:~ ylf$ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=1000204886016; sectorsize=512; blocks=1953525168
    gpt show: /dev/disk0: PMBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1953525167
           start        size  index  contents
               0           1         PMBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1951845952      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      1952255592     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1953525128           7        
      1953525135          32         Sec GPT table
      1953525167           1         Sec GPT header
    YLFs-iMac:~ ylf$
    Also i do not have boot camp installed yet because like i said, it messed up my boot camp after i created the partition thats why i removed boot camp, right now i only have APPLE OS

  • Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

    Hey guys!
    Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
    After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
    (The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
    One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
    Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
    I'm trying to keep it together but this is raging me out.
    I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
    To summarize, my two issues are:
    A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
    B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
    Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

    I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

    Hello
    I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
    I made an image of it , then deleted win partition from utility disk , ( wrong idea )
    I didn’t notice that boot camp  could erase win partition , anyway I have tried several times , and always after reboot boot camp
    I get the same
    Missing operating system .
    If I boot from dvd install win or if i boot from the boot win partition.
    hd and partitions looks OK to utility disk
    Any idea to fix the problem ?

    I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
    I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
    If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
    I don't know what links you have so i'll just include everything:
    Installing boot camp on a Late 2009 iMac:
    http://support.apple.com/kb/TS3173
    Direct link to Late 2009 iMac-specific Windows drivers.
    http://support.apple.com/kb/DL995
    I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
    Hope this helps.

  • 2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

    Hey all,
    I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
    I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
    I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
    So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
    Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
    So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
    So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
    So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
    Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
    Thanks!

    Thank you to The hatter.
    I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
    Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
    I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

  • Windows 7 Freezes at Restart After Installing Boot Camp Drivers

    Hi,
    I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
    If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
    Is anyone else having this problem? Any ideas or workarounds?

    I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
    I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Maybe you are looking for