Installing CR11R2SP5 runtime on alternative location doesn't seem to work

Hi there,
I've made a msi using the 5.2 RDC merge modules and now i'm trying to install it on G:\Program Files.
Unfortunatly it keeps installing itself on the C-drive (C:\Program Files\Business Objects\..).
I'm kicking off the msi using a batchfile with the following commandline:
Msiexec /i "G:\CrystalReports11_Install\CrystalReports11.msi" REBOOT=ReallySuppress /qn INSTALLDIR="G:\Program Files\"+
I've also used TARGETDIR instead of INSTALLDIR, but that didn't work either.
Can anyone help me with this issue?
Thanks,
Sander.

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Similar Messages

How to capture Runtime.exec() output? doesn't seem to work?

This is the first time I've used Runtime.exec();
Here's the code:
Runtime rt = Runtime.getRuntime();
            process = rt.exec(jobCommand);
            BufferedReader input = new BufferedReader(new InputStreamReader(process.getInputStream()));
            String line=null;
            while((line=input.readLine()) != null) {
                 System.out.println("OUTPUT: " + line);
            int exitVal = process.waitFor();
        } catch(Exception e) {
             e.printStackTrace();
        }//end catchas you can see, this is just copied and pasted out of the standard example for this method.
When it gets to the line:
while((line=input.readLine()) != null)
it doesn't read anything. However, when i run the SAME exact command from the windows CMD prompt i get a ton of output.
what am i doing wrong here?
thanks.

Welcome to the forum!
>
as you can see, this is just copied and pasted out of the standard example for this method.
>
No one can see that - you didn't post a link to the example you said you copied.
>
it doesn't read anything. However, when i run the SAME exact command from the windows CMD prompt i get a ton of output.
>
No one can see what command you are talking about; you didn't post the commnd or even describe what output you expect to get.
>
what am i doing wrong here?
>
What you are doing wrong is not providing the code you are using, the command you are using or enough information about what exactly you are doing.
No one can try to reproduce your problem based on what you posted.

How do you install on Solaris 10? pkgadd doesn't seem to work.

I've downloaded and unzipped firefox 3 times in the last 9 months. Every time I try to find something to click on to install and and can't. I try pkgadd in various places and it never finds any packages. How do you actually install this thing on a Solaris box?

libjavaplugin_oji.so is the classic Java plugin. Curent Firefox versions need the Next Generation Java plugin (libnpjp2.so)
http://java.com/en/download/faq/firefox_newplugin.xml
http://www.oracle.com/technetwork/java/javase/manual-plugin-install-linux-136395.html

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

Email Security Plug-in - Doesn't seem to work with right click or save and send

I've searched the knowledge base but have not located the answer yet.
We have the Encrypt Message plug-in installed to flag the email [SEND SECURE]. This works very well when in Outlook. It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office. The add-in still shows and users are clicking it and the Send button but the emails are not going securely. We are on Microsoft2010 on mostly XP machines.
How can I get Encrypt Message to work in all instances?
Thank you.
Starla

Andreas
I am getting an error. See below for what I'm choosing and the response. let me know if I'm supposed to be trying to download from another area.
Thanks
Starla
Email Security Plug-in - Doesn't seem to work with right click or save and send
Cisco IronPort Email Security Appliance C370
Release:IPAS
Filename: CiscoEmailSecurity_7-2-0-039.exe
Remove
Details
Release
IPAS
Filename
CiscoEmailSecurity_7-2-0-039.exe
Release Date
25/Oct/2011
Description
Cisco IronPort Email Security Plug-in (Outlook)
Size
32541.84375 KB (33322848 bytes)
Router Checksum
0x553f
MD5
f0c864697d9e1a3e8f5297062943ac50
Email Security Plug-in - Doesn't seem to work with right click or save and send
Save the device to 'My Added Devices' list
More Info
'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Added Devices' section. 2. Selecting any task specific product
   selector and clicking on 'My Added
    Devices' in left pane.
Email Security Plug-in - Doesn't seem to work with right click or save and send
Set Cisco Notification Alert
More Info
All 'Cisco Notification Alerts' list could be found
by: 1. Clicking on 'My Cisco' Tab and expanding
    the 'Support Notifications' section.
Cisco service contract information indicates you are not authorized to download software for the following product(s):
Cisco IronPort Email Security Appliance C170
Cisco IronPort Email Security Appliance C370
Cisco IronPort Email Security Appliance C650
To download software for other product(s), remove the software for the product(s) listed above.
Or, if you feel this message is in error, please:
1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
         User ID (Cisco.com ID used to download software)
         Contact Name
         Company Name
         Contract Number
         Product ID
         Desired Software Release or File Name
2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

Boot Windows AND FreeBSD from my MacBook Pro 8,3 using an external DVD drive. I'm considering to remove my DVD-ROM and replace it with an SSD drive. That doesn't seem to work. Why not?

As the title says, I'm attempting to boot off my favorite operating systems, Mac OS X, Windows 7 and FreeBSD from an external DVD drive. However, for some odd reasons, booting the Windows DVD and FreeBSD 9.1 install DVD from the external drive does not seem to work. I was able to create a bootable USB with the Windows installer, but whenever I attempt to do the same with FreeBSD, I only get an error message that says "No bootable device -- press any key to restart." Is this a limitation that Apple deliborately created? If so, why won't Apple let its customers do whatever they please with their computers, considering that customers who want to change the hardware and/or operating systems knows what he is doing, without having to worry about some silly Apple limitations?
If I sound rude, I apologize for that, as no impoliteness is intended from my side.
In advance, thanks. Have a wonderful day, everyone.

That is only partially correct at best.
When you are booting off Windows or any other operating systems that usually don't support EFI (including Windows), your Mac uses something called CSM-BIOS. And as long as that CSM-BIOS implementation on EFI-based Mac do not support booting off from USB (note that Mac OS X Installer works fine when booting from USB), not even a USB Apple SuperDrive which once was an internal drive, there mot definately is something for Apple to fix.
When attempting to install Windows via BootCamp, a somewhat hybrid GTP/MBR table is created. When you boot off the installer disc of the OS you intend to install (i.e. Windows 7, FreeBSD, etc), your Mac might not support the EFI boot option (at least my 2011 17-inch MacBook Pro doesn't support that), so the only way of booting that second OS installer is via the regular BIOS, which Apple's EFI based systems implement as CSM-BIOS.

Wacom Tablet doesn't seem to work all of the time?

I have a Wacom Intuos 3 tablet, not more than a year old. I recently installed it onto my Macbook Pro and it worked fine, but when I unplugged it and came back to work with it later, it doesn't seem to work. The mouse doesn't respond to where I click on the pad.
So, I've reinstalled this a couple of times and was able to make it work perfectly, but today when I went back to work in photoshop, it doesn't seem to be responding again.
Does anyone have any tips? I know that Leopard likes you to eject USB devices instead of just pulling them out of the slot, but I don't see anywhere to eject it.
Does anyone know what's up?

Downloaded a driver from website, tablet works now.

Pdfmark code in MS Word 2008 doc doesn't seem to work properly to create Named Destination

Hi all,
I've been having trouble with creating Preview-compatible Named Destinations in Acrobat 9.x (see http://forums.adobe.com/thread/770470?tstart=0). Distiller, on the other hand, appears to create compatible Destinations, so as a last-ditch effort, I tried to go back to my original source file (Microsoft Word 2008 document) to use Distiller's pdfmark functionality, to see if maybe I could finally get a PDF with Preview-compatible Destinations.
Following instructions found elsewhere on this forum, I went into Word and inserted the following field into a test location in my document:
PRINT "[ /Dest /testdest /View [ /XYZ null null null ] /DEST pdfmark"
This field code is supposed to then cause a pdfmark to be inserted into the resulting PostScript and/or PDF files. Distiller is supposed to understand this and turn it into a Named Destination called "testdest." However, it doesn't seem to work - I don't see the pdfmark code in the PS file, and the PDF file doesn't have any Named Destinations in it.
I'm using Acrobat 9.x on Mac OS X 10.6.5, so I tried this two different ways:
1) Using the "Print to Adobe PDF" workflow (which replaced the "Adobe PDF Printer" from previous OS/Acrobat versions) - this automatically generates a PDF via (presumably) an API call to Distiller... and
2) Using the "Print to Postscript" workflow to generate a PS file, which I then ran through Adobe Distiller.
In neither case did I end up with a named destination in the PDF file, as I was supposed to. In case #2, even the Postscript file didn't have a pdfmark embedded in it. Thus, I'm assuming that perhaps this is particular issue may be a problem with MS Word 2008 rather than with Acrobat... but I'm hoping someone might have a clue as to how to fix it.
I welcome ideas on how to get Word 2008 to properly output pdfmark code, so that Distiller will pick it up and properly embed a Named Destination into the PDF...
Thanks in advance.
(If anyone has ideas about the Preview-compatible problem, linked above, that would also be great!)

You're suggesting that it was never fixed from Word 2004 to 2008? Possibly. I wonder if it's fixed in Word 2011? Anyone know? But is it really a Word problem, rather than a Distiller issue?
I appreciate your offer, though I do have access to Word on Windows (2003, I think), so I could try Distilling there... I only worry about formatting, since there are minor differences (e.g. font kerning, etc.) between Mac and Windows that are subtle, but sufficient to create formatting issues for very long documents (e.g. pushing figures onto the wrong pages, etc.). That would be a rather big problem.
The question remains whether this is an issue with Word or Distiller, though... and whether it's fixed in Distiller X and/or Word 2011.
Adobe, care to comment?
I'd really love to find a proper Mac solution, if one exists... it would be rather a slap to Mac users if a solution doesn't exist.

Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.

Can a use a partitioned external hard drive to create a disk image? I tried, doesn't seem to work using disk manager.

OK, it's very bad computing to use a backup disk for anything but a backup. The reason being is if/when the HD crashes you will have lost not only all your backup but the data files. While I commend you for wanting redundant backup, you really need separate EHDs for doing so. Format each EHD using Disk Utility to Mac OS Extended (Journaled) using the GUID parttition. When you connect, OS X will ask if you want to use that drive as a Time Machine backup drive, select yes and then let it backup. On the second EHD format the same way however do not use TM as a backup, this time I'd suggest an app such as SuperDuper or Carbon Copy Cloner to make a clone of the internal HD. Leave both EHDs connected and TM will backup new or changed files automatically on a hourly basis. The clone you will need to set to backup on the schedule you want. For example I have my SuperDuper EHD set to backup only changed or updated files at 2AM every day.
The advantage of a clone is that if the computers internal HD crashes you can boot from a clone and continue working, TM will not do that but it's great for keeping an archive of all files. So if you want a version of a file from many months ago, TM will help you locate and restore it.

Saving tabs doesn't seem to work anymore for me in 4.0.1

Since I've installed FireFox 4.0.1 the saving of tabs doesn't seem to work anymore. When I press exit I only receive the notification "are you sure you want to close x tabs?". When firefox or my computer crashes the tabs are saved, but when I try to exit myself I can't. Can someone tell me how to solve this?

Hi, I have a similar problem. When playing music, the screensaver has stopped working. Instead all I get is a white screen. I have checked all the settings and they are ok. The photos show and the albums show will work. But as soon as I switch back to slideshow I get the white screen back. It is even like this in 'Preview'.
Have you solved the problem now. If so, how?
Anyone else affected? I took a new software update to the Apple TV two days ago. Could this be the problem?
all advice welcome
regards
Michael

Bridge Offset Nulling Doesn't Seem to Work With SCC-SG24

Does anyone know if the DAQmx "Perform Bridge Offset Nulling Calibration" vi works with the SCC-SG24 modules? We have used our NI-9237 module in the past to acquire dual-channel load cell (thrust & torque) measurements, and calling that vi does a fine job of zeroing out the values before applying the load. However, it doesn't seem to work when we try to take the same measurements using an SCC-SG24 module.
We are able to zero the values manually, by using the nulling resistors and potentiometers in the SCC-SG24. But, whether the nulling resistors are installed or not, we are not able to zero the values using the "Perform Bridge Offset Nulling Calibration" vi. Running that vi does induce a significant offset in the values, but it is not the correct offset needed to bring the values to zero. For example, with no load applied, a torque reading before running the vi may be +1090 in-lbs, and be "zeroed" to -465 in-lbs after running the vi. Running the vi multiple times (to check repeatability) always brings us back to approximately -465 in-lbs.
An additional issue (not sure if it's related or not) is that if we try to run this vi to offset just one of the channels in the task (such as just thrust, but not torque) it will still induce a small offset in the other channel, which doesn't seem right.
I guess I'm not clear on whether the subject vi is performing an operation on the hardware, the software, or both, so I'm not sure whether the SCC-SG24 modules may not be compatible with this vi?
Thanks for any help you can provide.

Hello Dhruser1,
I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module. Take a look at this article: Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset. If you're doing both these is likely the cause.
Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false? If not this may be why it affects other channels.
I hope this helps, and if not please feel free to post back with an update after trying these things.
Cheers,
Brooks

Siri doesn't seem to work with Find My Friends

Siri doesn't seem to work with Find My Friends completely accurately. If I ask it where once of my friends is, it tells me it doesn't know, but shows that person in the response, twice, with their location. Anyone experiencing this?
Also - I found a bug. If you dictate a note via Siri it will not sync with iCloud at all. If you manually update the note however after Siri dictates it will. It will also sync if you manually start a note and then use the microphone on the keyboard.

Actually, I figured it out. For the person in question I had both [email protected] and [email protected] listed in their contact info. When you look at them in Find My Friends see which one is highlighted and delete the other. Once I did that they only showed up once in Siri.

Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?

Hi, I have photoshop CC. It's the french version but I would like to have it in english. I went in the creative cloud to change the language but it doesn't seem to work. Do you know how i could do it ?

Please indicate whether or not the following link helps... I have not had to use it and so I do not know if/when it does help.
Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?

I can't access most internet pages because I don't have adobe flash player for my powerbook and the download doesn't seem to work?

The message requesting that you download Adobe Flash Player takes you to FP requireing an Intel processor. Doesn't work on a PowerPC processor. I fould a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Data Detection in Calendar in Mavericks doesn't seem to work anymore.

Since the upgrade to Mavericks, data detection doesn't seem to work anymore.
Before i just typed in a new event:
"Meeting XY at 7pm in Berlin"
and ical would automatically change that to "Meeting XY" and insert the time in the appropriate field and the same for the location.
Now it doesn't work anymore and i have to insert it manually in the different fields.
Anyone with the same problem? and maybe a solution?

After searching a bit longer, I found a solution that worked for me. A setting in the CUPS server needed correcting. See this page for instructions: http://www.macintouch.com/readerreports/printing/topic2807.html#d21jul2008
After removing the Deny line indicated in the link above, I removed the printer from the remote computer and then added it back it. Two things happened, first when adding the printer back in, I no longer got the generic postscript printer driver as the default, but got the correct Officejet Driver. Second, It worked! Now to try it with my old 10.4.x powerbook to see if it's solved there too.
Hope that helps!
David
Message was edited by: chopp

Installing CR11R2SP5 runtime on alternative location doesn't seem to work

Similar Messages

Maybe you are looking for