Installing driver hp deskjet 1180c using window 8

Is it any compactibility driver that i can use or any update driver. please advised

Hello mybully,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps .
I worked on behalf of HP

Similar Messages

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

Installing Adobe Photoshop 10. Using Windows 7 and IIE. Get message "error:1"

Installing Adobe Photoshop 10. Using Windows 7 and IE. Gt message "error:1"

Not sure what CS3 is. Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
Looks like I can't attach a Word or PDF document or paste an immage.
This forum may not be very user friendly.
Let mehttp:// know if there is another way to communicate.
Thanks,
Phil
<Removed by Moderator>

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.

I have a problem installing Adobe elements premiere 9 using windows 8.1

I have a problem installing Adobe elements premiere 9 using windows 8.1, it just says that it did not install and no files were changed. is this program compatible or is it yet another bin job?
H E L P

miked
I have Premiere Elements 9.0/9.0.1 installed on Windows XP 32 bit, Windows 7 64 bit, as well as Windows 8.1 (previously 8) and no problems.
Are you installing the program from installation files (purchased as a download to a Windows or Mac computer??) or from installation disc labelled for Windows?
After the program is installed, then you install the Premiere Elements 9.0.1 Update and work from it.
Adobe - Premiere Elements : For Windows : Premiere Elements 9.0.1 update
More details first before we go changing any compatibility settings.
Thanks.
ATR

How clean print head or install toolbox on hp deskjet 940c using windows 8 64 bit

I want to change the ink cartrige and clean the head and re-align it.
I also want to know the quantity of ink in the cartriges.
How can I install the toolbox?
I have Windows 8 64 bit.
Thank you!

Hi rgauthi,
I am sorry to say your printer does not have full feature software and drivers. You are using an in-OS driver and HP Solution Center and HP Toolbox are not supported by the in-OS driver. You can use the workarounds in the following link. Learn how to use your HP printer with the new Windows 8 operating system.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot install driver software for N8-00, Windows ...

I'm having a lot of trouble getting any Nokia software to work on my PC.
(This was the same for my previous Nokia 2730.)
The first time I connected my N8-00 to my PC, running Windows Vista 32, my PC worked out it was an N8-00 and a window appeared asking me to confirm AutoPlay settings - there was a checkbox (which I checked), but no OK button.
I could go to Start > Computer and see the N8-00 there though.
I opened the device and found the Ovi Suite Installer and tried to run that (because the downloaded version didn't work either - I'll start another thread about my troubles with Ovi Suite) but it didn't work.
I then removed the phone from my PC.
Now whenever I connect my phone to my PC Windows tries to install the N8-00 drivers and fails, giving me these messages:
"Found New Hardware - Nokia N8-00"
"Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
Nokia N8-00 USB Phone Parent
No such interface supported
If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Obviously not being able to connect my phone to my PC is very frustrating and restricts many of the features I wish to use.
Help in solving this issue would be very greatly appreciated.

Could someone of you resolve the problem about the connection of N8-00 to PC??
I have the same problem and I can't resolve it.
Best regards!!

Vista driver for deskjet f2180 on Windows 8.1

I have a new Windows 8.1 desktop (64 bit), a Vista laptop (32 bit), and an HP F2180 printer/scanner. F2180 is connected to desktop via USB, is shared, and works fine from W81. I can't get it connected to the Vista laptop.
On the desktop, when I check the box "x86 Type 3 - User Mode", I am told to find the driver. Any idea what the file name and location are?
TIA.

Hello there TIA, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about your Deskjet F2180 not functioning on your Windows Vista system. I would recommend (from the Vista laptop), running the full driver installation. This should install the driver properly on your laptop.
Here is the link to the driver: HP Deskjet F2100 and F4100 Full Feature Software and Driver
I hope my post was informational!
Have a great day and thanks for posting
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Fail to install driver HP1050 deskjet for windows 8 when connecting printer with computer

I have this great HP desket 1050 printer for less than a year. My computer broke down so I bought a new one, but now with windows 8.1. So my printer was not working anymore, I fail to install my new printer. I can install the driver for HP1050 deskjet, but then there is a moment that you have to connect the PC and printer with an USB cable. This is the moment that the installation fails, nothing happens when I plug my printer into my PC. So I never finish the installation process complelty. The same thing happens when I choose add printer later and then add my printer. My printer is on and the cable is well plugged in. Anybody any suggestions as I would like to use this printer again. Thanks in advance

Hi @Annemarie85
I understand you are unable to complete the installation of your Deskjet 1050.
Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Windows: 'Device Setup Failed to Complete' or 'Unknown Device' Message Displays on the Computer Duri....
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Driver for HP deskjet 1180c on Windows 7 64-bit

Thanks Bob. Your help meant I was able to get the 1180c printer up and running after installing Windows 7. Would not have known where to even start looking for a solution without finding your "fix". Thanks again.

I am glad I could help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installing itunes on my pc using windows 7 makes the disc drives disappear

does anyone have a fix for this? I'm using a pc with windows 7, used to be able to uninstall itunes and the drives would reappear, now that doesn't work so I have no disc drives. Have tried everything (my computer friend has, for me) including a new disc drive - same problem. AM ready to buy a new computer, but searches indicate the problem may occur with a new computer as well.

Click here and follow the instructions.
(98818)

Runtime error installing driver for photosmart C6380 on Windows 7 Professional 64-bit machine

I have an HP Photosmart C6380 All-in-one printer networked to home network and connected to a laptop (hardwire) with Windows 7 Professional 64-bit operating system.
Downloaded driver from HP site and receive message:
Runtime Error
Program:c:\USERS\.....\AppData\Local\Temp\7xS374E\SETUP.exe
Any suggestions?
I can print, but cannot use other all-in-one functions

Hi HW65,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the HP Software and Drivers for your printer.
Please remove any cables that you have connected to the printer with the exception of the power cable. Please make sure you have the power cable connected direct to a wall outlet and NOT a power bar/strip. Here is a document that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. Note that the printer in the document is a LaserJet printer and this is only used as an example and that the document is meant for HP products in general.
Please remove the Printer from the computer with the use of the uninstall utility that can be located in the All Programs menu in the HP folder under the model of your printer.
Please click on the following link to download and install the printers HP Photosmart C6300/6324 All-in-One Printer series Full Feature Software and Driver. Please save the file to your desktop so that it creates it's own Icon.
Once the download is complete, double click the Icon and follow the instructions. Please do NOT connect any cables to the printer until the installation prompts you to do so.
If you have any other questions or any concerns, please feel free to write me back.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Can i make a osx install drive on usb with a windows computer?

Hi. I have a macbook pro that needs OSX reinstalled on it, my issue is my other macbook doesn't work anymore so my question is can i install mac osx on a usb drive with a windows computer?

Based on Apple's knowledge base. this configuration is supported for Windows 7 x64 and 8 using Mountain Lion 108.3 or higher. Simply use BootCamp Assistant to set it up.
See here:
http://support.apple.com/kb/HT5639?viewlocale=en_US&locale=en_US
and here:
http://support.apple.com/kb/TS4441
For your application, you might also consider virtualization software like VMWare Fusion or Parallels.
I use both BootCamp and VMWare Fusion. Fusion is much easier to install, more flxible, runs at the same time as your Mac applications etc. For typical applications, there is no notable performance degradation.
If you need high performance graphics for gaming, BootCamp is still the best way to go. For all other applications, I prefer VMWare.

Installing mac in macbook after using windows 7 in it

earlier i installed windows 7 in macbook pro, now i want to install mac again,
i removed the hard drive, formatted it fully, made it an unallocated partition
now when i insert mac disc, it pulls it out again, and its not booting mac disc for installation
dont know whether there is something wrong with the partition system
need your assistance

Did you use the Boot Camp Assistant app to create the Windows partition and start the Windows install or did you install Windows natively without any version of OS X on the system?
If you used Boot Camp then OS X is still on your hard drive. At a restart or statup after shutting down hold down the Option key to get the boot selection screen and then select the OS X partition, usually Macintosh HD.
If you wiped the drive completely before or during the install of Windows then you will need either the original system reinstall discs that came with your Mac, if it came with discs, or use the Online Internet Recovery system if your Mac computer came out after June 2011.

USB drive access issues when using Windows Backup Win7Pro

I've run into a similar issue. I'm using an RD1000 USB drive which uses hard drives as removable media. There's an alert which states "Windows backup needs a CD/DVD or USB Drive to continue." It then states I
can continue the backup on the existing media or insert blank media. By simply selecting Continue the backup will proceed but this interrupts the backup every night so the backup won't automatically run until that challenge is responded too. I checked
permissions and reloaded the MS windows driver for the drive. I tried exFat and NTSF formats. Not sure how to force it to automatically proceed. The backup is only a tenth of the size of the total available drive space. Any
ideas?

Checked this URL ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/insert-removable-mediawindows-backup-needs-cddvd/5bf0d5ed-ba9d-420e-8b19-b162eb285563
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Installing driver hp deskjet 1180c using window 8

Similar Messages

Maybe you are looking for