Installing Iplanet web server and directory server behind a firewall

When installing iplanet web server and directory server behind a firewall - should the interal ip address be used or the external ip address?

Hello,
When you are installing iplanet web server behind a firewall,you should use the internal ip address in the firewall.
1. The external ip address connection to the Internet. The type of IP address used?dynamic (commonly used for standard
modems) or static (commonly used for cable modems) is dictated by the ISP to which you connect and the type of service it provides.
2. The internal ip adress connection. This connection must be a static IP assignment, and it must be assigned by you.
obviously it depends on the type of firewall setup you have.
Thanks
Selva

Similar Messages

Integrating Messaging Server and Identity Server

I've got JES 2004Q2, and I'm trying to install the various components on different workstations to prove that a) the software works, and b) it's a viable alternative to Exchange (so please please help me get it working!)
The problem I have is getting Messenger Server and Directory Server talking properly so that I can create users and then log in as those users. After days of frustrating searching for solutions to this problem (and also find people who have successfully done this), I decided to install the components onto one server.
And it worked. Installing Messaging Server, Identity Server, Web Server (contained for Identity Server), Directory Server, and Admin Server all on the same box, configuring them all to use the same directory server for UG and preferences, running the various configuration tools that come with the software, and it all works together fine. Using "./commadmin domain modify .... -S mail", I get "OK". I can add users with the "-S mail" option, log in as those users, and send emails between those users. So this tells me that the software does work, albeit on one box.
When I try to separate the services out to separate boxes, they don't seem to integrate properly. I thought that maybe the order in which you configured applications made a difference (ie. configuring Identity Server after Messenger Server means IS will pick up on the changes made to the directory by MS, and enable it). I also tried to see if using the same options directory server from different boxes helped, but nothing. I've even tried patching them using 116568-52 and 116585-10 but no luck.
Therefore, I've found that installing all servers on one box works, but installing them on separate boxes doesn't (despite using the same directory servers). My conclusion in this is that one of two things must be the case:
a) there's something in the install that has to be changed to reflect the fact that the services are running on different boxes
b) the install of the services adds files to the system somewhere which other packages in JES pick up on (hence the reason why installing everything on one box works), and this isn't documented anywhere
Unfortunately, the output of commadmin when it fails isn't that helpful (nothing against the developers, however it doesn't really help in the fault finding process). I do believe however that the problem is with Identity Server and its configuration, rather than Messaging Server.
Here's some (possibly) useful info:
kipling# ./imsimta version
Sun Java(tm) System Messaging Server 6.1 HotFix 0.01 (built Jun 24 2004)
libimta.so 6.1 HotFix 0.01 (built 12:52:04, Jun 24 2004)
SunOS kipling 5.8 Generic_117350-02 sun4u sparc SUNW,Sun-Blade-1500
kipling#
(on UG server)
# ./commadmin domain modify -D admin -w <password> -d uwe.ac.uk -n uwe.ac.uk -S mail -H kipling.uwe.ac.uk
FAIL
Unable to set attribute(s)
(some verbose mode output)
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/TaskManager
[Debug]: To servlet: task=ModifyDomain&objecttype=Domain&domain=uwe.ac.uk&add_services=mail&add_preferredmailhost=kipling.uwe.ac.uk
[Debug]: RECV: FAIL
[Debug]: RECV: Unable to set attribute(s)
[Debug]: CLITask: status returned =FAIL
FAIL
Unable to set attribute(s)
[Debug]: DBG: doOne returned code=6
[Debug]: Contacting : http://bronte.uwe.ac.uk:10080/commcli/logout
[Debug]: Logout ...
[Debug]: RECV: SSOToken id AQIC5wM2LY4SfcyW5hbVBGXqCdsYYDjVarSFRMd6HIxsGho=@AAJTSQACMDE=#
[Debug]: RECV: destroyed
Root suffix: dc=uwe,dc=ac,dc=uk (all "o=" references have been dropped)
All services have their own local options directory server.
Can anyone give me any suggestions? If I log a support call with Sun, what is the likely resolution time? My ultimate goal is to get the whole suite running together, then install Portal server. Once that's working, download the connectors for Outlook and get it all working with Outlook. As I said at the start, we're hoping to show this is a viable alternative to Exchange (certainly for the backend) so any help will be greatly appreciated!
Iain

slo_chewie wrote:
Does the email recipient address change when the email is sent to gmail i.e. does an email sent to [email protected] become [email protected]?
We've got google for domains setup, so users would retain a @domain.com address regardless if there mailbox was hosted on the internal server or hosted at google.You can make use of the mailRoutingAddress: user attribute and source routing to get the desired behaviour e.g.
=> Set the following value to the LDAP entry of the user who is hosted on the gmail server. The "[email protected]" address should match the users mail: address:
mailRoutingAddress: @gmail.com:[email protected]=> Ensure the following option has been tcp_local channel in your imta.cnf file. This option strips off the "@gmail.com" value of the recipient address before sending the email to the gmail.com servers.
dequeue_removerouteMake sure you run "./imsimta cnbuild;./imsimta restart" after modifying the imta.cnf file.
Regards,
Shane.

How to install iPlanet Administrative Server while installing iPlanet Web Server Ver 6.0 Service Pack 3 in SUN Ultra 10,Solaris 5.8

We are the partner of Sun Developer Connection Program.
Company: ITI Ltd.
Member no: 1024878
We tried to install iPlanet Web Server ver 6.0
Service Pack 3, in Sun Ultra10 Solaris 5.8 machine.
During the time of installation it is giving Error:
Failure installing iPlanet Administration Server
Do you want to continue? if Yes
it starts poceeding with the installation and again gives an Error:
Failure installing Core Java Classes.
Do you want to continue? if Yes
It completes the installation.
But startconsole cannot be executed.
Please send the solution.

May I ask where did you get the bits for iWS 6.0 SP3? The latest version currently available for download is iWS 6.0 SP2.
http://wwws.sun.com/software/download/download/
Thanks

After installing iPlanet Web Server v6 SP2, there is error message: https-admserv60 cannot be found??

After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinaca

this will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors

SQL Server 2012 express istallation failing to install "Database Engine Service" and "SQL Server Replication"

I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.

Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2061893607
Start time:                    2013-12-23 14:42:45
End time:                      2013-12-23 15:07:51
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name:                  mymachine1
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          Database Engine Services
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          SQL Server Replication
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012
Management Tools - Basic                 1033                 Express Edition
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title:                         Service Pack 1
Knowledge Based Article:       KB 2674319
Version:                       11.1.3000.0
Architecture:                  x86
Language:                      1033
Update Source:                 MU
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           <empty>
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Manual
SQLSYSADMINACCOUNTS:           MH\gt038676t
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Passed
Feature:                       Client Tools Connectivity
Status:                        Passed
Feature:                       Client Tools SDK
Status:                        Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Passed
Feature:                       Management Tools - Basic
Status:                        Passed
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Browser
Status:                        Passed
Feature:                       SQL Writer
Status:                        Passed
Feature:                       SQL Client Connectivity
Status:                        Passed
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm

OAM and Directory Server Interaction

I am in the middle of continued fact finding for implementing OAM. One question that has come up is how does OAM use the directory server it is configured to connect to. We would like to use AD as our authentication source but the word is Hell No if OAM is going to try to write data back into the directory server or store data in the directory server as our AD Admins are mandating that OAM will only be given read only, normal user level rights even if it requires write privileges and directory admin rights to function. I have search the manuals and have yet to find a really good explanation of how it works and uses the Database Schema and Directory Server. I suspect it is read only but I need to know ahead of time so I can make everyone aware that were going to have to run multiple directory systems due to the imposed limitation on AD access.

Anybody??? I really need help with this....

BW Precalculation server and BW server can be installed on the same machine

Hi BW Expert
We are evaluating make Precalculated Workbooks and we have a doubt, BW Precalculation server and BW server can be installed on the same machine?
Regards,
Egly

Hi,
It is better to have them on separate systems.
https://websmp201.sap-ag.de/~sapidb/012003146900000085752006E/HowtoInformationBroadcasting.pdf
Please go through the below threads:
BW Pre Calculation server
Information needed about bi pre calculation server
Hope this helps.
Regards
Vishal

Difference between web server and application server

Hi Everybody
Could anybody expain difference between web server and application server?
Sharad

Hi there
The difference I know is the application servers provides the containers for the applications to run which is not provided by the web servers.
For example the containers can be an EJB container or JSP container etc

Differences between Web server and Application server

Differences between Web server and Application server:
We use Tomcat web server or sun Application server to deploy web applications . What is the differeences between these two servers?

http://en.wikipedia.org/wiki/Web_server
http://en.wikipedia.org/wiki/Application_server

Messaging Server and Calendar Server Mount points for SAN

Hi! Jay,
We are planning to configure "JES 05Q4" Messaging and Calendar Servers on 2 v490 Servers running Solaris 9.0, Sun Cluster, Sun Volume Manager and UFS. The Servers will be connected to the SAN (EMC Symmetrix) for storage.
I have the following questions:
1. What are the SAN mount points to be setup for Messaging Server?
I was planning to have the following on SAN:
- /opt/SUNWmsgsr
- /var/opt/SUNWmsgsr
- Sun Cluster (Global Devices)
Are there any other mount points that needs to be on SAN for Messaging to be configured on Sun Cluster?
2. What are the SAN mount points to be setup for Calendar Server?
I was planning to have the following on SAN:
- /opt/SUNWics5
- /var/opt/SUNWics5
- /etc/opt/SUNWics5
3. What are the SAN mount points to be setup for Web Server (v 6.0) for Delegated Admin 1.2?
- /opt/ES60 (Planned location for Web Server)
Delegated Admin will be installed under /opt/ES60/ida12
Directory server will be on its own cluster. Are there any other storage needs to be considered?
Also, Is there a good document that walks through step-by-step on how to install Messaging, Calendar and Web Server on 2 node Sun Cluster.
The installation document doesn't do a good job or atleast I am seeing a lot of gaps.
Thanks

Hi,
There are basically two choices..
a) Have local binaries in cluster nodes (e.g 2 nodes) ... which means there will be two sets of binaries, one on each node in your case.
Then when you configure the software ..you will have to point the data directory to a cluster filesystem which may not be neccasarily global. But this filsystem should be mountable on both nodes.
The advantage of this method is that ... during patching and similar system maintenance activities....the downtime is minimum...
The disadvantage is that you have to maintain two sets of binaries ..i.e patch twice.
The suggested filesystems can be e.g.
/opt for local binaries
/SJE/SUNWmsgr for data (used during configure option)
This will mean installing the binaries twice...
b) Having a single copy of binaries on clustered filesystem....
This was the norm in iMS5.2 era ...and Sun would recommend this...though I have seen type a) also for iMs 5.2
This means there should no configuration files in local fs. Everything related to iPlanet on clustered filesystem.
I have not come accross type b) post SUNONE i.e 6.x .....it seems 6.x has to keep some files on the local filesystem anyway..so b) is either not possible or needs some special configuration
so may be you should try a) ...
The Sequence would be ..
After the cluster framework is ready:
1) Insall the binaries on both side
2 ) Install agent on one side
3) switch the filesytem resource on any node
4) Configure the software with the clustered FS
5) Switch the filesystem resource on the other node and useconfig of first node.
Cheers--

TREX Installation, Error in phase - Install TREX web resources and finalize

Hello,
Platforms:
SO - Win 2008 (R2) X64
During the last phase "Install TREX web resources and finalize instance" in installation process of TREX 7.1, it show me a weird error...
It seems that was some problem during the creation of sap start service of this new instance... but that is weird because I checked at services.msc and that service SAPTSM_02 and nothing seems wrong with it, it seems that was well created and it is in Started mode!... I checked firewall settings (all of them are in OFF status), I also checked CUA settings (is stopped)...
I searched for this error and I found the following SDN forum:
SAPNW EHP1 SR1
I already press the retry button but it always show me the same error.
During this phase the SAPInst window show some information and in there I see this two:
creating sap start service of instance TSM/TRX02...
service not correcttly installed.
It is very weird thing!
I will post some log files such as sapstartsrv.exe and sapinst.log.
sapstartsrv.exe:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed
sapinst.log:
INFO 2012-01-20 16:29:24.446
Creating file C:Program Filessapinst_instdirNW702STANDALONETREXCIsapstartsrv.exe.log.
INFO 2012-01-20 16:29:24.457
Output of F:usrsapTSMTRX02exesapstartsrv.exe -stdin is written to the logfile sapstartsrv.exe.log.
WARNING 2012-01-20 16:31:41.182
Execution of the command "F:usrsapTSMTRX02exesapstartsrv.exe -stdin" finished with return code -1. Output:
Test call to Service failed: 80080005
CO_E_SERVER_EXEC_FAILURE: Server execution failed
Service not correctly installed.
ERROR 2012-01-20 16:31:41.380
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.381
MOS-01011 'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.
ERROR 2012-01-20 16:31:41.470
FCO-00011 The step createService with step key |TREX_NW_CI_MAIN|ind|ind|TREX|ind|0|0|TREX_MAIN|ind|ind|TREX|ind|0|0|createService was executed with status ERROR ( Last error reported by the step :'F:/usr/sap/TSM/TRX02/exe/sapstartsrv.exe' returned with '-1'.).
Can you help me please, how can I solve this?
Kind regards,
JDimas

Hello Arjun Venkateswarlu,
1).Is your Windows Firwall is enabled ? Disable the windows Firewall and also restart SAPinst
- As I said the windows firewall is disable (OFF)
2). Make sure that <sid>adm belongs to the local admins or Better provide the domain admin rights to the id which you are using for installation if it is domain installation.
- All the created users during this installation belongs to local admins. This isn´t a domain installation!
3). Try Restarting the installation by stopping and starting Windows and restart SAPINST and coninue Old Installation again.
- I already did that... but it continues to show me the same error!
Any other tip?
Kind regards,
JDimas

Mail, iCal Server and iChat server will not work over VPN

I have an Airport Extreme Base Station at the office running the network. Behind it sits a Mac Mini Snow Leopard server running 10.6.3. The ports necessary for Mail, iCal Server and iChat work fine through that external connection. I can also connect with VPN from my 10.6.3 clients.
HOWEVER, when I connect with the VPN clients, I am suddenly unable to access the Mail, iCal Server, Wiki server and iChat server. All connections time out. I can ping the server and I can do other things that do NOT work on the public Airport like ssh or VNC. ssh and VNC are closed at the airport extreme.
So it's pretty odd. When I'm connected via the VPN, all ports that are forwarded to the Snow Leopard server time out over the VPN.
I've tried various and sundry configurations with the VPN client. This includes trying to send all traffic over the VPN, moving it up in the service order, etc. etc. Nothing fixes it. DNS resolution is working fine, however when I do a wireshark capture of ppp0 traffic, I notice that SSL and TLSv1 handshakes appear to occur on the public IP address instead of the private network IP address... and they're all resets.
Has anyone gotten this to work successfully? Like I said, all ports that are NOT forwarded through the Airport work fine over the VPN, but will not work when connected to the VPN. It's really bizarre.

New data: any ports that are normally forwarded on the Airport Extreme to the Mac Mini server will not work when connected to the VPN.
For instance, if I have imaps/993 forwarded from the Airport Extreme to the Mac Mini, it works fine over the Internet. If I connect to the VPN, I can connect to all OTHER services on the Mac Mini, but Mail, for instance, will not work.

Different service packs in admin server and managed server

Hi,
Has anybody successfully used a WebLogic 6.1 SP1 managed server that
connects to a WebLogic 6.1 SP 2 admin server?
BEA's docs claim:
"The Administration Server must be running the same version of
WebLogic Server as the Managed Servers in its domain. The
Administration Server must also have the same or later service pack
installed as the Managed Servers in its domain. For example, the
Administration Server could be running version 6.1, Service Pack 2
while the Managed Servers are running version 6.1, Service Pack 1."
This is precisely what we want to do, but it's not working. In this
case, we need to run the admin server and managed server on the same
machine, but we need the managed server to run SP 1 to work around a
bug in SP 2. So to our initial installation of WebLogic 6.1 SP 2,
where I run the admin server, I added a second installation, this time
WebLogic 6.1 SP 1, with a different BEA_HOME. When I start the
managed server from this second installation, I can see from the logs
that it is starting up correctly as 6.1 SP 1. But then it fails with
a ClassCastException when connecting to the admin server (I have
included the stack trace below). This seems typical of version
compatibility problems I've had when I've tried connecting to a server
with a client of a different version.
But in this case, you are supposed to be able to have the managed
server with a lower service pack. Does this work for anybody? Has
anybody encountered the problem I'm having? Note that the servers are
not clustered, if that makes any difference, and we have a custom
security realm in addition to the default file realm (though "system"
of course is in the default file realm).
Thanks in advance for any help,
Jim Doyle
[email protected]
####<Aug 8, 2002 10:25:38 AM EDT> <Emergency> <Server></server>
<chile.iso-ne.com> <webui
server> <main> <system> <> <000000> <Unable to initialize the server:
'Fatal ini
tialization exception
Throwable: java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace

Hi,
Has anybody successfully used a WebLogic 6.1 SP1 managed server that
connects to a WebLogic 6.1 SP 2 admin server?
BEA's docs claim:
"The Administration Server must be running the same version of
WebLogic Server as the Managed Servers in its domain. The
Administration Server must also have the same or later service pack
installed as the Managed Servers in its domain. For example, the
Administration Server could be running version 6.1, Service Pack 2
while the Managed Servers are running version 6.1, Service Pack 1."
This is precisely what we want to do, but it's not working. In this
case, we need to run the admin server and managed server on the same
machine, but we need the managed server to run SP 1 to work around a
bug in SP 2. So to our initial installation of WebLogic 6.1 SP 2,
where I run the admin server, I added a second installation, this time
WebLogic 6.1 SP 1, with a different BEA_HOME. When I start the
managed server from this second installation, I can see from the logs
that it is starting up correctly as 6.1 SP 1. But then it fails with
a ClassCastException when connecting to the admin server (I have
included the stack trace below). This seems typical of version
compatibility problems I've had when I've tried connecting to a server
with a client of a different version.
But in this case, you are supposed to be able to have the managed
server with a lower service pack. Does this work for anybody? Has
anybody encountered the problem I'm having? Note that the servers are
not clustered, if that makes any difference, and we have a custom
security realm in addition to the default file realm (though "system"
of course is in the default file realm).
Thanks in advance for any help,
Jim Doyle
[email protected]
####<Aug 8, 2002 10:25:38 AM EDT> <Emergency> <Server></server>
<chile.iso-ne.com> <webui
server> <main> <system> <> <000000> <Unable to initialize the server:
'Fatal ini
tialization exception
Throwable: java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException:
weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.PosixSocketMuxer.deliverGoodNews(PosixSocketMuxer.java:456)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:385)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace

Enqueue server and Message server in ABAP/Java dual stack

Hi you guys,
I have some questions when studying SAP, could you please explain for me:
- In ABAP and Java system, do each stack have it own enqueue server and message server?
- What is the difference between Enqueue server and enqueue work process in ABAP stack?
- If there is one message server for each stack, which messager server (ABAP or Java) will the Web dispatcher connect directly to?
- How do ABAP message server and Java message server communicate with each other?
Thank you very much.

1. in Dual Stack, normally you have ABAP Stack and SCS Central service Instance. ABAP Instance has Message server, SCS has it own Message server and enqueue server. ABAP instance doesn't have enqueue server, because the SCS already has enqueue service
2. Communication between ABAP and J2EE Engine uses RFC (JCo) or HTTP Interface.
Web Dispatcher will connect to the ICM of that instance, and the ICM is talking to Abap dispatcher and J2EE Dispatcher.
3. The term: enqueue server and enqueue work process , already shows its different quite obviously.
What so confuse about it ? do some search on SAP Online Documentation.
Regards,
Vincent

Calendar Server and Email Server on Same Machine - Email Issue

Hi.
I've installed email and calendar on the same host. The email domain for test purposes is the name of the machine. I noticed in the configuration guide, it says that if you put the calendar server and email server on the same machine you need to configure sendmail.cf and modify incoming rules in order to get email reminders from Calendar to Email. I have done this but am still not able to. I get the emails kicked back to root and they say:
553 5.3.5 System Config Errors
553 5.3.5 <machine name> config error: mail loops back to me (MX problem?)
Has someone seen this before?
Thank You,
Matt

Hi Russ,
We have the same problem as Matt.
We have properly set up OCS Email it works well both inside and outside our network.
The only thing that appears not to be working is the email notification capabilities of OCS Calendar.
We have changed sendmail.cf as stated in the documentantion.
we are using -
RedHat Advanced Server 2.1,
sendmail 8.11.6
bind 9.1.3
I would be very gratefull of any information on this, as we're out of ideas...

Installing Iplanet web server and directory server behind a firewall

Similar Messages

Maybe you are looking for