Installing Leopard using an external dvd rom

I am unable to install Leopard on my iMac G5 due to a defective superdrive. Can i install it using an external dvd rom? pls HELP!

If it uses FireWire it should work. Boot while pressing Option. When he cursor changes to a arrow, select the DVD, then click the straight right-pointing arrow.

Similar Messages

  • How to install Leopard from an external DVD reader?

    Hi,
    I've bought Leopard today. unfortunately, it's not yet installed on my PowerBook. As my SuperDrive is dead, I use now an external DVD (Lacie Portable DVD-RW), but it doesn't work. I can read the Leopard install DVD, but when it reboot, it reboot on my current installation.
    I've tried the following during the boot sequence:
    - alt pressed, but I can only see my main HDD
    - c pressed, but I boot on my current installation
    Can you tell me if it is possible to install Leopard from an external DVD, and how can I do that ?
    Thanks in advance.
    Regards,
    Emmanuel Di Pretoro

    Can you tell me if the same problem occur with a FireWire external DVD ?
    It does not occur on your model of Mac.
    (25504)

  • Is it possible to install Tiger using an external DVD drive?

    I have one the of the first iMacs and at the time I thought I didn't need a DVD Player. However, now I was thinking of buying an external DVD player/burner. Is it possible to upgrade to Tiger using the external DVD drive since I don't have an internal one?

    Hi Celticart,
    Welcome to the discussions.
    I have an old AGP PowerMac G4 to which I have hooked an external Firewire DVD Drive. I have installed Tiger without any problems, using this drive. I see no reason why it couldn't be done on an iMac as well, (provided it has Firewire).
    I don't think you could get it to work using an external drive hooked up via USB.
    Cheers!
    Karl

  • Why can't I boot from  my windows install disk using an external dvd drive?

    My internal disk drive is broken on my computer, so I'm using an external one, but when I put my windows install disk in, it shows up when I'm using the computer, but it doesn't show up when I hold ALT on startup. Why is this?

    Alt/Option Boot code is all in ROM. It shows an Icon for each potentially-bootable Volume.
    Your Windows install DVD is not directly bootable, and so it does not show an Icon. (An OS 9 Installer CD would not show an Icon either.)
    To install Windows, you need to research the use of Boot Camp, the software that provides Mac drivers and facilitates the Installation of Windows on a Mac. There are also Windows restrictions on the use of external drives which you may have to meet.

  • Can I install Tiger using an external DVD drive?

    My PowerBook is being repaired and I have to use an older G4/733 tower (OS 9.2; CD/zip drives only) from 2001 ASAP. I purchased Tiger and now need to load it, along with the new software. Rather than purchasing an internal dvd drive, can I buy and external dvd drive to install Tiger/new software? I've seen some posts that say "no" and others that say yes, as long as its firewire, not USB. In looking at external drives, I've seen some compatibility requirements that say OS X as the minimum. Some places like CDW and the Apple store don't seem to have an answer for me. Does anybody here know? thanks!
    Bob
    PowerPC G4   Mac OS 9.2.x  

    Internal drives are much cheaper; you can get a DVD burner for under $40 online, vs. well over a $100 for an external, which may or may not boot your specific system.
    The NEC ND-3550A or Pioneer DVR-110D will both boot the OS installer DVD when using the "C" Key, or from Startup Disc...
    In a QS, you just have to remove the drive tray faceplate before installing the drive; This Apple Article has clear diagrams of the replacement process.

  • Can I upgrade from Tiger to snow leopard using an external DVD drive

    I've been trying to upgrade to Snow Leopard from Tiger but keep nothing happens. I keep getting a grey folder with a question mark on it. Can anyone tell me what this means?

    If you have another Mac with Firewire, you can use it's Optical Drive as a big Firewire Optical, put the Install disc in the other Mac, boot the other Mac in to
    Target mode...
    http://support.apple.com/kb/HT1661
    Connect a fw cable, use the Otion key on this one to choose the Install Disc in the other Mac.
    Can I install if I make a bootable copy to my firewire external?
    Yes, especially if you have a small 5 to 9GB Partition, you can use DU to Restore the Install Disc to that.

  • Installing from external dvd rom

    Hi,
    Is it possible to install solaris 10 from external dvd rom. If yes then how?
    Thanks,
    Javed

    I just did this on a Sun E420, attaching a SCSI DVD-ROM to the external SCSI connector, so that it's on a different SCSI bus.
    Did a probe-scsi-all to see the device.
    Did a devalias cdrom to see what that path looks like
    Did a devalias dvdrom <path to DVD like the cdrom>
    boot dvdrom (worked)
    to make the device alias permanent (devalias setting is lost after reset or power down) use nvalias command (like the devalias) and make sure the use-nvramrc? OBP env variable is true. (see online OBP docs).
    If you have a x86/x64 system, this won't help.

  • Upgrading to Tiger using an external DVD Drive

    Our computers at work don't have internal DVD drives. When we try to install Tiger using an external DVD we can't get past the restart process. We insert the DVD into the external DVD drive and restart our computers. Once the computer restarts, we double-click the Tiger DVD and it once again tells us to restart. My questions is....Can you upgrade to Tiger using an external DVD drive or should I request the CDs from Apple for the upgrade?
    Thanks,
    Devra
    Power PC G4   Mac OS X (10.3.9)  

    Hi Devra,
    first of all: WELCOME TO THE DISCUSSIONS!
    Be aware that you CANNOT boot from an external USB-drive: Don't start up from an external USB device. You have to use an external firewire drive. Then insert the DVD and reboot while holding down the Option-key. Select the DVD in the external firewire drive as boot volume.
    You also might want to follow this procedure: 10.4 Tiger Upgrade: Decision tree+Checklist . It also covers potential install errors due to outdated firewire-drive firmware.
    If this answered your question please consider granting some stars: Why reward points?

  • Installing Tiger w/ External DVD ROM

    I have an e-mac with a dud super drive, bought an external DVD Rom Drive, pop the disk in, It mounts, double click install, it says restart to start the instalation, i do, then it boots up like nothings different, no installation, I tried to restart holding down "c" and a weird screen comes up with some "apple basic" stuff and i have to restart I also changed to start up disk option and it didnt work. I'm runing 10.2.8, bought a new mac book with tiger and leopard software, I want to upgrade my good ol e-mac but cant! Please help!
    Brad

    Bradley Beef,
    Welcome to the Apple Discussions!
    Is the external DVD Firewire or USB? Only Firewire devices can serve as external boot drives for PowerPC (PPC) macs such as the eMac.
    Holding the c key down at startup tells the Mac to try to boot from the internal optical drive. You want the option key, as described in Startup Manager: Select a Startup Volume. (You can also look at Magical Macintosh Key Sequences).
    From your post, it does come across that you're using the Install discs from the Mac Book. Aside from the pesky legal detail that the Mac Book software is licensed only for use with the Mac Book, gray label OS X Install discs are model-specific and will only work with the model with which the discs were shipped (not to mention the Mac Book is an Intel CPU and the eMac a PPC CPU). You'll need the retail black-label Tiger or Leopard Install DVD to update the eMac.
    Updating from 10.2.8 to 10.4.x will make your eMac feel much more responsive (assuming you have at least 512 MB RAM). There's a handy upgrade guide for Tiger in Gulliver - Tiger Upgrade Guide.

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • Install Leopard on an External Drive on a Snow Leopard Mac Book Pro

    Hi
    I have a MBP 17/CTO 2.66GHz i7, which came installed with Snow Leopard.
    I've used boot camp to install Windows 7.
    I've attempted to install Leopard 10.5.4 on an external drive.
    The steps I've taken:
    1 - Connected my WD Passport on the Firewire Port
    2 - Partitioned the drive. The first partition is 100GB, Mac OS/X Extended (journal) and I've selected the GUID Partition Scheme
    3 - Inserted the Mac OS/X Leopard DVD, and followed the instructions to restart
    4 - On restart I have three options. Mac OS, Windows and Install Mac OS\X
    5 - I select Install Mac OS\X.
    6 - The disc spins for a few moments and then the laptop freezes
    Beware of the following issue:
    1 - On restart more often than not, the DISC will spin and then the laptop will freeze.
    2 - To overcome this, restarting pressing the ALT (option) Key.
    3 - You should see your boot options. If you do not see "Install Mac OS\X", then eject and reinsert the disc.
    The question maybe why would I want to have an Leopard Installation when I have Snow Leopard. The software I develop has thrown up a number of differences between Leopard and Snow Leopard, hence I need both OS's to support my software.
    I mentioned this to the Apple Store before I purchased my machine. They put me through to a senior technician at Apple Care, who told me it would be possible to have the set up I am after; and to contact Apple Care if I ran into any difficulties.
    After I received my laptop and ran into the problems I described above I contacted Apple Care, only to be told by a senior technician that it should be possible to install Leopard on an external drive, but Apple Care cannot provide any support or assistance.
    I really do like the laptop and would much rather not return the laptop; but I really do need the setup described.
    Anyway I have tried a number of different approaches:
    1 - Having no partitions (so just the single partition)
    2 - Trying all three Partition Schemes:
    - GUILD Partition Table
    - Apple Partition Map
    - Master Boot Record
    All resulting in the same problem.
    I can confirm the external drive does appear as bootable in disc info.
    My guess is one of the following is preventing the install:
    1 - It is simply not possible to install an earlier version of Mac OS\X than 10.6 on the laptop I have, even if I tried to install on an external drive. This restriction is built into some hardware confirguration. So even if I wiped the internal hard drive or added a new partition to the internal hard drive, I would not be able to install 10.5.4. I say this may be a reason as the second technician told me the CPU has built into it a process which prevents installing older versions of Mac OS/X, but that it should NOT restrict installation on an external harddrive.
    2 - When trying to install Mac OS/X, a search is carried out for an external drive which has the correct format. For some reason it may be that this search is not finding my external drive?
    I'm a little stuck here and quite disapointed that the support promised by Apple Care for assistance in setting this up, is now not forth coming.
    Any help or suggestions would be appreciated, as ideally I would prefer to keep and not return the laptop, it's a beautiful piece of machinery.
    Cheers
    Parmy

    The mystery continues...
    I have an older MBP (2.33 GHz Intel Core Duo) which came installed with Tiger. I can confirm I purchased a genuine copy of Leopard (10.5.4) from the Apple Store and it’s not an OEM version. I installed 10.5.4 without a hitch on my old MBP internal drive. It is the only OS installed on my old MBP.
    Using my older MBP (which through software updates is now running 10.5.7), I managed to install 10.5.4 onto my external HD (WD My Passport Studio – 640GB FireWire 800).
    However; on the final restart, the screen remained grey and 10.5.4 did not boot from the external drive.
    I restarted the machine holding down the ALT (option) key, and only two options appeared, Macintosh HD and the Install DVD. I selected the Macintosh HD and opened System Preferences.
    In System Preferences --> Startup Disk, I discovered the partition on my external HD which contains 10.5.4. I selected this partition and selected restart.
    On restart my MBP displayed a grey screen, and the blue light on my hard drive flashed slowly. I left this for an hour, however; the OS did not start and the screen remained grey.
    I then plugged my external HD into my new MBP which I started holding down the ALT key.
    To my surprise I found 3 boot options (Macintosh HD, Windows and Leopard). Leopard being the partition on my external drive, which now has 10.5.4 installed.
    I selected Leopard, but sadly after 30 minutes, the OS failed to boot.
    Although this deviates slightly from this post, I fail to understand the problem here:
    1 – Why can’t I boot 10.5.4 on an external drive, from my old MBP? Surely this is not because my old MBP is now running 10.5.7?
    2 – Why can I see 10.5.4 as a boot option on my new MBP but not on my old MBP when I start the MBP holding down the ALT key?
    I doubt there is a problem with my external drive, as it seems to read, write, etc... in all normal cases.
    Whilst it definitely appears that I won’t be able to boot 10.5.4 on an external drive from my new MBP, I should be able to at least boot it from my old MBP, which would give me the option of installing Snow Leopard and Windows on the internal drive of my old MBP.
    Apologies for keeping this post going, but I hope by getting to the bottom of this, it will help other Mac users as well.
    I’ve run out of ideas of things to try, so I will give Apple Care another call in the morning, and will report back.
    Any suggestions of other things I can try?
    Cheers

  • Format iMac from external dvd-rom

    My DVD-ROM kicked the bucket today & to top it off, my AppleCare expired end of 2009. Replacing the ROM is out of the question (for now) as I was quoted approximately $500 for a replacement.
    I need to re-install Leopard & would like to know, is it possible to connect my other iMac & use it's DVD-ROM drive to re-install Leopard?

    blimpmedia wrote:
    Is there anywhere online I can buy spare parts for my iMac?
    The Apple service centre wants to charge me $400 to replace the DVD-ROM, and $150 for labour.
    I don't know if these people ship to your country, but they have reasonably-priced parts:
    http://www.ifixit.com/Mac-Parts/iMac-20%22-2.16-GHz
    They also have step-by-step instructions for a number of replacement operations:
    http://www.ifixit.com/Guide/Repair/Installing-iMac-Intel-20-Inch-EMC-2105-and-21 18-Optical-Drive-Replacement/1090/1
    WARNING: An iMac can be a little tricky to work on. For example, there are some parts that have to be coated with heat grease during assembly. Another thought: that disk drive is probably not specific to Apple. If you can find a competent computer repair shop, you could refer them to those repair instructions and let them do the replacement.

  • Can I install Leopard on an external drive to run my computer?

    Since it seems my hard drive has totally bit the dust, can I install Leopard on the external drive I use for Time Machine, and run my desktop from that drive? Could I run it from an external drive totally dedicated to Leopard? I am buying a new desktop soon, but I need info off of this machine. Can I plug in my Time Machine drive to my laptop and be able to use it without losing data?

    Elizabeth Salcido wrote:
    Thanks so much.
    Youa re welcome!
    I figured I would have to use a second drive. At least when I get my new desktop I will have a drive for Time Machine for both desktop and laptop.
    If you really plan to keep the laptop around after you get your desktop, I would recommend replacing its internal hard drive. While running your laptop off an external is possible, it should be considered a stopgap measure. i wouldn't do it on a permanent basis. For one, as you'll find out, it's quite a bit slower than when using the internal drive.

  • Play movies from commercial DVD disks using an external DVD player?

    Is it possible to play movies from commercial DVD disks using an external DVD player on Mac OS X 10.5.6? Thanks.

    You might not need to install Tiger. If you pop in the installer DVD there might be the DVD Player under Additional Software/Applications. Then you can install that and watch DVDs.

  • Starting up an emac using an external dvd drive?

    My emac has frozen. I was installing the software update to system 10.4.6 when the machine crashed (not enough HD space? don't know.)
    Now, it won't get past the Starting Mac OS X screen.
    I figure I need to do a clean install or something drastic, just to rebuilt the system software. I think that will work, but I have a problem:
    The 10.4 disks I bought only came in DVDs. My emac only has a CD drive, so I installed the software using an external DVD burner.
    I have tried to restart holding down the C key, but it's not starting off the external drive.
    I have no idea where the ancient OSX disks (CDs) are that came with the computer, and don't know if it's a good idea to go backwards anyhow.
    I know the actual hard drive on the emac is functional, because I was able to make it a target disk to back up the files today.
    Any clue how to start up using the external DVD drive and the 10.4 DVD?

    Edward Rosenstein,
    Welcome to the Apple Discussions!
    Had you used patchburn on the external DVD drive?
    Does the drive appear as an option using the option key to bring up Startup Manager?
    You mention backing up the eMac's hard drive in Firewire Target Disk Mode. The host computer you used for that should show you how much free space there is on the eMac hard drive; you'll need at least 5 to 8 GB free.
    If the host computer you used for the Firewire Target Disk Mode backup has a DVD drive, you can use that to install 10.4 onto the eMac while the eMac is connected in target disk mode. If the host computer doesn't have a DVD drive, try moving the external DVD drive to the host, run Patchburn if it's not recognized, and you should be able to install onto the eMac that way.

Maybe you are looking for

  • How do I resolve picture distortion in Adobe Acrobat?

    The following image is a screenshot of the distortion we're getting in Adobe Acrobat (part of CS4). (The two pictures should be identical.) This computer is running Windows 7 and Adobe CS4. We had this problem in the past with Windows XP and CS4, so

  • Users not able to create new ojects in Integration Repository

    Hi,     We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.     all the developers are able to login to the integration repository, but when they are trying to "Edit"

  • Risk Purchase - New Scenario

    Hi All, please help me to map following scenario in SAP:- What is Risk Purchase ? I raise a PO to Vendor but Vendor do not able to supply at time. So that i can send copy to other vendor in emergency. Now how to make the penalty to the defaulter Vend

  • Scheduling Agent - failure to retrieve schedule

    Hello ODI gurus. We are using ODI 10.1.3.4.0. We can schedule execution of scenarios and sometimes, in Topology Manager, can "view schedule" of the agent. But often, at other times, when we attempt to "view schedule", it returns "Unable to retrieve a

  • PDF of Aperture photo book?

    I'd like to design a photo book in Aperture; will I be able to save it as a high-res PDF?