Installing Lightspark and/or Gnash? [compile errors]

The Flash player in Firefox (and, more importantly xulrunner generally and thus in Conkeror) is unusable. I've even tried the fresh player plugin to use Google Pepper Flash in Firefox, and it's the same - it stutters/jitters. (Plays fine in Chrom{e|ium}).
I was trying to install Lightspark and/or Gnash, but no matter which package I try from AUR, there's always a compile error. Has anyone successfully got either/both of these installed?

I've installed Lightspark by downgrading llvm and Gnash by building from source with a workaround.
My workaround doesn't seem to be working for other people, though, so I won't detail it here until I figure out what's different.

Similar Messages

I am trying to update to i-tunes 11.3 but when I download I get a message that itunes didn't install properly, and a reference to error 127. Any ideas?

I am trying to update to i-tunes 11.3 but when I download I get a message that itunes didn't install properly, and a reference to error 127. Any ideas?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Exit Code: 6 - I can' install Indesign and get the following error mssages.

Exit Code: 6 - I can' install Indesign and get the following error mssages.
It is part of Creative Suite 5.5 Premium
I have uninstalled many times and re-installed - to no evail.
Could I have a hardware problem? Any help wold be apreciated
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s), 13 warning(s)
WARNING: DW065: Display requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}
WARNING: DW065: Display requirements not met for {857CC5F0-040E-1016-A173-D55ADD80C260}
WARNING: DW065: Display requirements not met for {50509A36-0291-1016-9CCF-FC05E9E55550}
WARNING: DW065: Display requirements not met for {92D5E8D4-01C8-1016-BBA8-F308D6BFCAC5}
WARNING: DW065: Display requirements not met for {C041EC47-0253-1016-891E-E5DE4AB922FC}
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {75506BF3-0597-1016-8D09-EFDCD9BFC7FB} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 -----------
WARNING: Failed to update the csu inventory for {75506BF3-0597-1016-8D09-EFDCD9BFC7FB} Adobe InDesign CS5.5 Common Base Files 7.5.0.0 return values 12:114
----------- Payload: {CBBBB5DB-8EF3-40D7-A9FE-5A69100C1EED} Adobe ReviewPanel CS5.5 3.0.0.0 -----------
WARNING: Failed to update the csu inventory for {CBBBB5DB-8EF3-40D7-A9FE-5A69100C1EED} Adobe ReviewPanel CS5.5 3.0.0.0 return values 12:114
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - AdobeHelp: Install failed

WARNING: DW065: Display requirements not met for {60E59A6C-7399-495A-B85C-C829F4E59602}
What more needs saying? Your screen resolution is too small.
Mylenium

When trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor

when trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor

I have the same problem

After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

After I downloaded the update of iOS 8.1.3,I was unable to install it and I see "an error occurred installing iOS 8.1.3"what can I do?

Hi Josephineapo,
If you are trying to update your iPhone over-the-air rather than through iTunes, and you are having issues with installing it, then I'd like you to please follow the steps outlined below.
If you get a message that "an error occurred downloading iOS," try again later. If the issue persists, try updating your device in another network or use iTunes to update your device. Learn more about iOS updates.
Update does not complete
If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
Resolve issues with an over-the-air iOS update - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Trying to install MAMP and get the following error: com.apple.installer.pagecontroller error -1

I am trying to install MAMP and get the following error: The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.)
Macbook Pro OSX Version 10.9.4

WWhat software verson are you using? Try exporting a master file.

Just installed CS6 and I keep getting error 16

I have just installed CS6 and I keep getting error 16 and my programs won't open - help!

Fix your user permissions on your library folders.
Enabling and using the "root" user in Mac OS X
Mylenium

LV 2011 (and LV 2012) Compiler Error. Invalid size in _InstSize: 21

I created a subvi in LV8.5 to handle user interface events outside a main vi. The subvi gets the control references which are registered for events, by a queue all actions are sent to a consumer case, nothing fancy. Everything works fine in LV8.5, but now I took all over to LV2011SP1 on a Windows 7 64bit and I get always the same error:
"Compiler error. Report this problem to National Instruments Tech Support. Invalid size in _InstSize 21"
that pops up 3 times. I tried to open the same code also in LV2012, same error... When trying to isolate the problem, I found out that by disabling code in the 3 biggest consumer cases I can get rid of the warning, but then I can't reduce the problem to one single element...
Any ideas?
Solved!
Go to Solution.
Attachments:
Compiler error. Invalid size in _InstSize 21.png ‏7 KB

DavidZ. wrote:
I created a subvi in LV8.5 to handle user interface events outside a main vi. The subvi gets the control references which are registered for events, by a queue all actions are sent to a consumer case, nothing fancy. Everything works fine in LV8.5, but now I took all over to LV2011SP1 on a Windows 7 64bit and I get always the same error:
"Compiler error. Report this problem to National Instruments Tech Support. Invalid size in _InstSize 21"
that pops up 3 times. I tried to open the same code also in LV2012, same error... When trying to isolate the problem, I found out that by disabling code in the 3 biggest consumer cases I can get rid of the warning, but then I can't reduce the problem to one single element...
Any ideas?
Try to inline the subvi's.
Try making them reentrant.
Mass compile.
Press ctrl-shift-arrow to force recompile of the entire vi call hierarchy.
Try separating the source from the binary.
Br,
/Roger

Installing itunes and am getting an error 2 message that say apple application support not found

Am trying to install itunes on my home computer windows 7 and am getting an error message that says Apple Application Support not found, error 2. Have uninstalled and reinstalled twice and get same error message.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Trying to install itunes and i get this error message itunes c:\programData\188f1432-103A-4ffb-80F1-36 B633c5c

How can I get itunes to install with this issue?

Try right clicking the iTunes install file and choose "Run as administrator".
If that option is not available, log in as an administrator and install iTunes.

How to install gcc and something around compiling

Hi all.I want compile my wine with patchs but I can´t compile it
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for cpp... cpp
checking whether gcc -m32 works... no
configure: error: Cannot build a 32-bit program, you need to install 32-bit development libraries.
I have to install some 32-bit libraries.but idk what librarions.Thanks for reply

If you really need to, I think the best way might be to install a 32-bit chroot and install the 32-bit version of gcc inside of it, which will then be able to compile 32-bit programs. Seems like it might be a bit of a hassle though .

Struts and Tiles Problem:compiler error message

I imported the application "tiles-documentation.war" from jakarta-struts-1.1 into the newly installed JDevloper(Version 9.0.5.2 Build 1618) and try to make it running.
While with the former Jdeveloper 9.0.4 I can run it nicely(a few manual editing of some files, though), with this newer version I just can not proceed with the following error message.
Project: D:\jdev\mywork\oc4j_startup\tiles_doc\tiles_doc.jpr
D:\jakarta-struts-1.1\webapps\tiles-documentation\tutorial\common\menu.jsp
Error: package and class have same name: tutorial.common._menu
the same kind of message repeated many many times.
It seems that I can not probe any more...
Can someone help me out? Thanks in advance

Right so these where messages from the JSP compile or from the import process?

I installed Firefox4 and I get an error message everyday about the platform version incompatibility of the XUL, which forces me to re-install firefox everyday.

Since I installed Firefox 4 I keep on getting the error "Platform version 2.0 not supported with...". Is there any way to update the XUL file? I do re-instalations everyday (after the re-instal, firefox runs smooth)

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

After installing itunes and restarting computer, blue error screen comes up

After I installed itunes 9 and restarting my computer a blue error screen came up. I had to restart my computer in safe mode and restore. Now itunes will not work. I have tried uninstalling and reinstalling various itunes, ipod, apple...etc programs and i get the blue error message again. HELP!

What version of iTunes is installed in the Apple default location ..... /Applications/iTunes ???
Drag the iTunes icon in the Dock to the Desktop and release; it will be deleted with a poof! Don't worry it's only an alias.
In your Home Page ~/Library/Preferences/ ......... drag to the Trash and delete:
com.apple.iTunes.plist and com.apple.iTunesHelper.plist
(don't worry ... new ones will be created upon relaunch of iTunes .... +see below+)
Using: /Applications/Utilities/Disk Utility/Repair Permissions
RESTART the computer
Within the Applicatons folder: double-click the iTunes icon ... if the launch is successful, drag a copy of the iTunes icon to the Dock ... release ... you will now have a current alias in the Dock.
P.S. *Do Not* have the iPod connected to the computer during this process!
DIXIE

I tried several times to install photoshop and got the following error messages:

-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1619
ERROR: Failed to repair Microsoft Visual C++ 2008 Redistributable Package (x86). Please try repairing it by double clicking on the executable at "C:\Users\Alan\AppData\Local\Temp\{F6735005-7472-4638-B149-A83B93D9AE90}\Photoshop_15_LS2 0_win64\Adobe CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com

Hi Alan1942,
Please go through the link below to do a clean uninstall through the cleaner tool.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
If that fails, try the link below for additional steps.
Troubleshoot with install logs | CS5, CS5.5, CS6, CC
Regards,
Anand

Installing Lightspark and/or Gnash? [compile errors]

Similar Messages

Maybe you are looking for