Installing on IMac with no cd slot

I have elements on my computer, I bought the cd and downloaded it. Now I have a newer IMac and it doesn't have a cd slot how can I get it on my new computer?
Thank you

Download it to the new machine. Where you download from can depend on the version.
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/tag/ddl

Similar Messages

Should I buy the imac with expandable memory slot for future os upgrade size?

Should I buy the imac with expandable 8gb memory slot for future os upgrade size?

I Always try to have a little more RAM on my computers that I think I'll need when I purchase them. Either have more ram installed when you order the iMac or purchase one with open slots for upgrading.
I Purchase my iMac 5K with only 8 GB RAM but it had two open slots. As soon as I received the iMac I purchased two 8 GB modules form Other World Computeing. That brought my RAM to 24 GB. I run multiple applications and the iMac runs smoothly.

Windows 7 install on Imac with 3rd partition

Hi there, I've been trying to install windows 7 on an Imac with a 3rd partition to store my files so they can be accessed on both the mac and pc install. I use the standard procedure for installing windows through bootcamp, which works fine, then when I try to generate the 3rd partition the windows install is not recognised by the computer. I have tried to generate the 3rd partition through the mac disc utility, the mac disc utility when used from the install disc and through the disc managment utility in windows 7 - none of which worked.
I found a post which gives a solution for this problem when installing windows xp - adjust the boot.ini file - but as far as I know the boot.ini file does not exist on windows 7.
Has anyone had the same problem and found a solution, or is there maybe a piece of software that fixes this issue?

Did you look at the post just below this here?
http://discussions.apple.com/thread.jspa?threadID=2665592
While it has been done, there are always side effects and downside as well.
And you are up against the 4-partition limit of MBR.

Error on win 7 install on iMac with 2 drives

OK been round this a few times.
iMac (i7)
1Tb HD & 256 SSD
used bootcamp to partition
made it through win install
and clikced Bootcamp partition, then advanced, then format.
Finishes format and the I click
NEXT
error
Windows is unable to install to the selected location.
Error: 0x80300024
Which someone online said is due to having more tha one drive.
I dont really want to crack open the iMac and remove a drive.
Suggestions?
thanks
b

I haven't heard of any fix from Adobe but maybe this will hwlp.
I kept getting an error this morning when trying to install Windows updates on my PC. One of the updates was trying to update Visual C++ (vc_red) from a folder on the C drive which was locked. The folder had a very long name (2f4b86.....). I kept getting a popup box pointing to the folder but it would not install the update from there. I had to copy the folder to the C:\Users\Public Downloads folder to get it to install. I mention this because vc_red seems to be involved with the previous Acrobat XI installation issue I had.
I would try looking at your installed updated and see if you have either update installed.:
Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Removing them may allow Acrobat XI to be installed.

Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

   Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20" with Mountain Lion 10.8.4 ?
   Thank You,
                            leetruitt

   Barney, William, nbar, Galt\'s Gulch:
   A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician. The tune up wiped over 1200 titles of my music in iTunes, also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get variations of this:
ACL found but not expected on
"private/etc/resolve.conf"
"private/etc/raddb/sites-enabled/inner-tunnel"
"private/etc/rabbd/sites-enabled/control-socket"
     Also, after four years of intense daily use it is cluttered with much junk, and every app that I was curious about, and I am a very curious guy.
   So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
   Crazy, I know, but to me a Mac represents something far beyond the ordinary input ➛ process ➛ output title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
    So, these are my reasons for wanting to do a clean install, correctly.
        Thank you, Truitt

How to install office imac with a dvd drive

Purchased my Mac today. Didnt realise that I needed a dvd drive to install Office Mac 2011. I dont have an eternal dvd drive. How do I install?

Here you go:
http://support.microsoft.com/kb/2439384
Basically, you go through the process to buy it as a download, but at a point you get the option to enter an existing product key - this permits you to download it without having to pay again.

I have Aperture installed on iMac with DVD. With new mavericks, do I need to uninstall Aperture and reinstall and use the serial number ?

Help with Aperture upgrade in new Mavericks

You may need to log out and relog back into the app store. Perhaps there are other AppleID related accounts signed in on that system. You could try creating another user accout and pursue the update that route. That has worked for others who weren't seeing the udpate right away.

How would I install Windows 7 on an iMac without a CD slot?

How would I go about installing Windows 7 on an iMac lacking a CD slot?
This might be quite obvious...but I have been searching the internet to no avail for an hour now, so I would appreciate help from all you kind folks in the Apple community.
Thanks in advance!

You can install Windows starting from a thumb drive with Windows 7 (you can create it on Boot Camp Assistant if you have the .iso of Windows) or buy the USB SuperDrive

I have a iMac and want to know if I can add an additional hynix memory to it? It currently has one with an open slot next two it.

I have a iMac and want to know if I can add an additional hynix memory to it? It currently has one with an open slot next two it.

You can install up to 6 GBs of RAM. You have two RAM slots so you could max out the machine by installing one 2 GB module and one 4 GB module. The largest supported module is 4 GBs, but you could use only one. Best memory performance would be attained by installing two 2 GB modules to provide 4 GBs of RAM. Installing two matching modules implements dual-channel memory that will provide a small increase in memory speed.
Sorry for my memory: Good places for RAM are OWC and DataMem. You do not have to use Hynix RAM. Any RAM will be fine as long as it meets the computer's requirements which are outlined in the section of your use manual for adding memory.

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

HT3986 blue screen of death when windows 7 is trying to complete install on iMac late 2006 running on Lion 10.7.5 with bootcamp 4.0.4...can someone pls help and thanks

trying to install windows 7 32bit ultimate on my late 2006 iMac with bootcamp 4.0.4 running on Lion 10.7.5, but it can't complete install, the BSoD appears as soon as it tries to reboot to continue setup, last stage reached " setup preparing computer for first time use and registry change" never seen reaching setup checking video performance then BSoD kicks in followod by black screen sayinng windows did not shut down properly, tried in safe mode, with advance mode, rebooted in install disk and ran repair, says cant fix it automatically, with messge 07: Failure during setup o.s. version 6.1.7600.2.0.0.256.1, tried to install nvidia geforce 7600 but mac says cant or not needed, been trying everything i can for 2 days no sleep...im slowly losing it
...any help will be appreciated and thanks

One person had iffy 3rd RAM.
You updated AMD graphic driver too to 11.8+ right? not just Apple's.
Plenty of free space for Windows to play with.
Do a chkdsk
Boot from Windows DVD and run memtest and also do system check
Restore points are better used, and image Windows
Rollback drivers works well, too
Some had trouble after NetFrame 4? update in Windows (but not on my 3 computers)
Apple drivers can be iffy and buggy
AppleHFS.sys has been known to be trouble. HFS allows for filenames that NTFS won't.
Paragon has HFS9.x driver that adds write support and does a better job
BC 4.x is still it seems trouble for more than a few (but obviouslly not in the 10s of thousands)

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

Before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

before i buy the complete creative cloud, how many computers can i install it on with the one subscription? i have a macbook pro laptop and a iMac desktop, which i both need it on.

Creative Cloud Help | Creative Cloud / Common Questions
"Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine."

How can I install Photoshop CS5 on a new iMac with no disc drive

How can I install Photoshop CS5 on a new iMac with no disc drive?

Hi,
Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
Please let me know if it helps.
regards,
Abhijit

Installing on IMac with no cd slot

Similar Messages

Maybe you are looking for