Installing Oracle 10g XE cabinet file error
I'ven been trying to install XE (production-version) on my PC, after removing the beta version first. I receive the following message during installation:
ERROR 1335. The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
Naturally I have tried downloading the whole file again, and rerunning the install program, but it comes up with the exact same message again. I don't think it very likely that a download will go wrong twice on independant occasions, so I assume something else is wrong. Can anyone help me?
i get the same error. i tried installing both the singlebyte/english version and the multibyte/unicode version. both give the same error. anyone? thanx.
Similar Messages
-
Rpm package error while installing oracle 10g
Hi ,
I tried to run the following package in RHEL 5 , as a preliminary step to install oracle 10g, the third file from disk 1 in server folder , I am getting this error.... all the other packages I was able to install
[amjadali@rhel5 Server]$ rpm -Uvh glibc-2*
warning: glibc-2.5-12.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
warning: package glibc = 2.5-12 was already added, skipping glibc < 2.5-12
error: error reading from file glibc-2.5-12.i686.rpm
[amjadali@rhel5 Server]$
Thanks and RegardsAAP wrote:
Hi ,
I tried to run the following package in RHEL 5 , as a preliminary step to install oracle 10g, the third file from disk 1 in server folder , I am getting this error.... all the other packages I was able to install
[amjadali@rhel5 Server]$ rpm -Uvh glibc-2*
warning: glibc-2.5-12.i386.rpm: Header V3 DSA signature: NOKEY, key ID 37017186
warning: package glibc = 2.5-12 was already added, skipping glibc < 2.5-12
error: error reading from file glibc-2.5-12.i686.rpm
[amjadali@rhel5 Server]$
Thanks and RegardsIf you will use yum instead of rpm, you will get out of this package-dependency-hell in one fell swoop. Oracle has a free public yum server. After properly configuring, just
root> yum install oracle-validatedI leave discovering the detail of configuring your system to use the yum server as an exercise for the student. Hint: google is your friend. -
After installing oracle 10g on linux im getting this error
Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for clusterHi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions. -
Error while installing ORACLE 10G on Windows
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error
ERROR : ERROR IN Writing to direcotory c:\documets~\rajeshrr~1\temp\Orainstall2009-08-23.Please ensure direcotory is writable and has alteast 45mb disk space.Installaion can not continue.
While installing i have credential of administrator i.e. for rajeshr is in ADMINISTRTAOR group.
Please inform any thing need to be need from my side.
Thanks in advance.
Regards,
Rajesh.
Edited by: Rajesh.Rathod on Aug 23, 2009 6:17 AMRajesh.Rathod wrote:
Dear All,
Previously i had installed ORACLEM 9i. I deinstalled using UNIVERSAL INSTALLER .Now when i try to install ORACLE 10g it is giving error Which Oracle 10g on which Windows version ?
Nicolas. -
Error while installing oracle 10g on AIX
I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl helpHi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios -
Error in Installing Oracle 10g Express Edition Universal on WIndows2003
While Installing Oracle 10g XE Universal On WIndows 2003 Server Standard Edition(Which is a standalone Machine). I got an following Error:
Error No: 0x80040707
Error Description: DLL Function Call Crashed: GetHostnameDll.getHostname.
Plz find some solution for the above problem.Hi
Here's the resolution that can work for you:
Disable the "Print Spooler" service before running the installer.
1.Open Control Panel: Start --> Settings --> Control Panel
2.Double-click "Services"
3.On the list of NT Services, right-click "Print Spooler"
4.Select "Stop"
5.Select "Properties"
6.Under Startup Type, select "manual" or "disabled"
7.Reboot your NT Server
8.After rebooting, verify that the Print Spooler is still "stopped".
9.Delete Program Files\Common Files\Installshield\Engine folder
10.Re-run the installer.
11.After installation, re-set the Print Spooler service to Startup type "Automatic" and start the service.
Also, have a look at the installshield page: http://consumer.installshield.com/kb.asp?id=Q108167
-Priya -
Getting Error while installing oracle 10g 1.0.2.0 on Redhat - linux 64bit
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.865231 wrote:
I am installing oracle 10g on Redhat 64bit (VM ware). In the middle it gives some error oracle Net services cancelled. Please see the error message below and advise.
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser.dir=/u01/app/oracle/product/10.2.0/db_1/network/jlib -classpath /u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:/u01/app/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/ewt3.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/u01/app/oracle/product/10.2.0/db_1/network/jlib/netcam.jar:/
u01/app/oracle/product/10.2.0/db_1/network/jlib/netca.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/help4.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/jewt4.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/oracle_ice.jar:/
u01/app/oracle/product/10.2.0/db_1/jlib/share.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/swingall-1_1_1.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvmhas.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/srvm.jar:/
u01/app/oracle/product/10.2.0/db_1/network/tools:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt9.jar:/u01/app/oracle/product/10.2.0/db_1/jlib/ldapjclnt10.jar:/
u01/app/oracle/product/10.2.0/db_1/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/10.2.0/db_1/lib/xmlparserv2.jar oracle.net.ca.NetCA /orahome /u01/app/oracle/product/10.2.0/db_1 /orahnam OraDb10g_home1 /instype typical /inscomp client,
oraclenet,javavm,server,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /
u01/app/oracle/product/10.2.0/db_1/network/install/netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" was canceled.
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.I thought the error message gave the advice already:
The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled.
This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.Looks like you canceled the pop up to configure your tns files. No harm, your database created just fine, but probably didn't configure listener.ora, sqlnet.ora, and tnsnames.ora. Just run netca and finish the tns confiiguration. -
Error while installing oracle 10g in redhat Server
Hi experts,
I installed Oracle 10g in RedHat Linux server. After the installation Oracle will work smoothly. After restarting the server we try to start the listener service manually but it is not starting. I configured listener.ora file using GUI interface and also set Oracle HOME and Oracle SID. But still it’s not starting.
when Try to start the listener the following error comes.
Tns-12537:TNS:Connection closed
Tns-12560:TNS:PROTOCOL ADAPTER ERROR
Tns-00507:TNS:Connection closed
Linux error 29:illegal Seek.
Please help meThanks for the answer it was helpful and i successfully started the oracle database.
and i am trying to import dump file to tha database by creating the new schema when i try this i used the command like
imp userid=username/password@servicename file=C:\filename.dmp fromuser=username touser=username but i got error as no such command.pls help -
Error While Installing ORACLE 10g in Redhat Linux 5.0
Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev GeorgeSajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Error while installing Oracle 10G Grid control in RHEL
I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
AnjanI saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas -
Error while installing oracle 10g grid on windows
hi all,
when i am installing oracle 10g grid i got the error that
"Configuration assistant "OMS Configuration" failed "
when i saw the log
it has been mentioned the failed to create repos user.
this is the out put of the log
[14-02-2008 11:51:55] Enter SYS user's password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter repository user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter MetaLink user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Getting temporary tablespace from database...
[14-02-2008 11:51:55] Found temporary tablespace: TEMP
[14-02-2008 11:51:55] Checking SYS Credentials ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking DB Init Parameters ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking for Repos User ...
[14-02-2008 11:51:56] Does not Exist.
[14-02-2008 11:51:56] Loading necessary DB objects ...
[14-02-2008 11:51:56] Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ...
[14-02-2008 11:51:56] Done Loading necessary DB objects
[14-02-2008 11:51:56] Creating repos user ...
DECLARE
ERROR at line 1:
ORA-01119: error in creating database file
'E:\oraclegrid\oms10g\oradata\mgmt.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
ORA-06512: at line 44
[14-02-2008 11:51:57] Failed.
[14-02-2008 11:51:57] Repository Creation failed. Failed to create Repos User.
all users and everyone has full permission on this folder, i don't know why it is giving,
please any one help me out i am stuck in the middle of the installation
oracle 10g grid version is 10.1
please reply to this
Regards,
Veeresh Sthis is the output what i get in oui:configuration assistants
Output generated from configuration assistant "OMS Configuration" (attempt 6):
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------------------------------------------------------------------
when i saw this E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands file
the below 2 lines was mentioned in that file.
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
this below log i got in E:\oraclegrid\agent10g\cfgtoollogs\cfgfw\CfmLogger_2008-02-14_10-28-34-AM.log file
i have pasted last lines of the files.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed with status=true
INFO: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed with status=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=100 ms
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Dropping the repository..
Quiescing DB ... Done.
Checking for Repos User ... Does not Exist.
Repos User does not exist ... Continuing with cleanup ...
Dropping Roles/Synonymns/Tablespaces ... Done.
Unquiescing DB ... Done.
Dropped Repository Successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=200 ms
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf . Please check the log file at 12
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf have completed with exitCode=12
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.2.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7} failed with an unhandled exception:
java.lang.Exception: RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7}
INFO: Framework waiting for Action to complete at 12:19:41.469
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 12:19:41.469
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved
please anyone help, i have given all details, i want to install this grid as soon as possible -
Error while installing Oracle 10g on CentOS 5.5
Hello,
I have been using the following url to install oracle 10g R2:
http://onaxer.com/blog/blog/tag/oracle-10g-r2-installtion-on-centos-5-5rhel/
I have copied the oracle 10g R2 linux version from windows to linux using FTP.
All the installer requirements have been met, but i'm getting the following error while running the installation:
[oracle@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-02-21_03-11-44PM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2011-02-21_03-11-44PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Any help would be greatly appreciated.
Thanks.Hi,
Download & Install the following rpm and retry oracle installation.
http://oss.oracle.com/projects/compat-oracle/dist/files/Enterprise_Linux/xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
installation
rpm -i xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386.rpm
After the RPM, is installed, you will also need to override the /usr/lib/libXtst.so.6 with the one from /usr/X11R6/lib/libXtst.so.6.
As root, issue the commands:
mv /usr/lib/libXtst.so.6 /usr/lib/libXtst.so.6.ORG
ln –s /usr/X11R6/lib/libXtst.so.6 /usr/lib/libXtst.so.6
Pubudu -
Error while installing Oracle 10g on Solaris 9 x86
Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
AlexCheck also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp -
Error while installing oracle 10g on centos 5.6 32 Bit
Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh: % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash: $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail. -
ACL Error when install Oracle 10G on Windows XP
I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
DavidHi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi
Maybe you are looking for
-
Multiple recepients in an e-mail
Is there a limit on how many addresses I can have in my "to" list. My recent attempt to reply-all to a message wil only pick 5 of the addresses.
-
Reader Error 1500, CPSID_83708, Please Help!
I have a most difficult problem with Reader. I currently have version 8.2.4 installed on my computer, and have for years now Reader updated itself automatically. An icon would appear in my system tray, I would click it, and the update took place no p
-
How to impliment a auto increamenting primary key feature in ADF ??
How to implement an auto incrementing primary key feature in ADF ( With out using database Triggers) Edited by: Dinil Mithra on Apr 24, 2009 2:28 AM Edited by: Dinil Mithra on Apr 24, 2009 2:59 AM
-
Bootcamp with Snow Leopard and Windows XP
Hello Previously I had used Bootcamp in a 27" iMac to install Windows XP Home for the purpose of installing Empire Total War and playing it. This all went ahead smoothly with no problems. I sold the iMac a while ago, having first removed Windows and
-
CVI 2013 S Functions in File bug: empty ring
This seems mostly relevant to service pack 2 of CVI 2013. I didn't see this behavior much in SP1. The issu is this: Occassionally, between making my project, some (not all) of the C files that are part of my project don't have a pouplated Functions