Installing Oracle 11gR2 Standard Edition on WINDOWS Server 2008R2 with ASM

Hi,
I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
I was thinking like:
- Installing Oracle software
- Creating ASM disks,diskgroups,instance,etc
- Creating DB (using dbca?), isnt' it?
Bundle of thanks in advance.
Best Regards

K-Saf wrote:
Hi,
I want to setup Oracle 11g DB (11.2.0.2) Standard Edition on Windows Server 2008R2 x64 bit with ASM Instance. I would appreciate if you could suggest me with the following little but important questions.
The following link from Oracle doesnt have 11.2.0.2 db version for windows x64 bit. Do a patch (which I think is a complete installation) is needed to install after installing 11.2.0.1? or I can directly install 11.2.0.2?
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win64soft-094461.html
Secondly, I have no such experience regarding installing and setting up ASM Instance on windows. How many disks or etc is needed for ASM (as ASM disks). One of the admin guy said, he has 6 disks (2 for OS and 6 you can use for Oracle or ASM so so). Could you please suggest, how should I divide the disk partitions of what should I say no idea :(
Also, do ASM instance (diskgroups,disks) should be setup before creating DB (through dbca?)
I was thinking like:
- Installing Oracle software
- Creating ASM disks,diskgroups,instance,etc
- Creating DB (using dbca?), isnt' it?
Bundle of thanks in advance.
Best Regards-You should create ASM
-After this you could be able to create DB

Similar Messages

  • Best way to change from Oracle 11gR2 Standard Edition to Standard one..?

    Hi,
    I have installed Oracle 11gR2 Standard edition+ installed database and additional software (which looks into the Oracle 11g database) in around 20 PCs (company)
    But now the management says that they got license only for 11g Standard one edition (Standard one is significantly cheaper than standard edition)
    So I have to change the Oracle edition from Standard to Standard one now..We only need standard one edition features in the PCs.
    Can somebody please advise what would be the best way to do this? Do I have to uninstall all database and reinstall standard one edition again?
    I will be grateful if somebody says some kind of upgrade is possible(in this case degrade!)..
    Pls ..waiting for a reply..its very urgent!
    Thanks&regards..

    Yes I agree there was standard and standard one options and I selected standard.
    But how to confirm?
    SQL> select banner from v$version;
    BANNER
    Oracle Database 11g Release 11.2.0.1.0 - Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    It doesnt say anything..where else will I check?
    Also as said in the previous post,
    1) SE max. 4 sockets , SE1 2 sockets <======== hardware restriction
    2) No RAC on SE1
    3) No Automatic Workload Management (a RAC feature) on SE1
    These apply to us.
    So can we get a SE1 license, since we are not on RAC and satisfy all criteria for standard one.
    Thanks&Regards

  • Oracle 11gR2 installation problem on Windows Server 2008 R2 datacenter

    Hi
    I am trying to install Oracle 11Gr2 64 bit on Windows server 2008 R2.The system configuration is "Intel Xeon, RAM 8.00 GB.
    i
    The installation is getting paused at the 8th step of Oracle installation.Neither i am getting any error message nor an entry is recorded in the Oracle inventory log.
    It is showing a blank screen after the prerequiste checks are complete.
    Request you to help me out in resolving the issue.
    Thanks in advance for your cooperation.

    Hi Helios
    Thanks for the response. The database is still not created to check in the Alert log .It is still in the phase of pre-requisite checks. I did not go with Silent installation.It is a plain single instance installation.
    The installation screen is greyed out with out any message or error.
    Please could you share if you have any thoughts on this.

  • Can't uninstall or reinstall oracle 10g express edition in windows server 2

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

  • Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

    I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
     On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min.  Then I checked the log file.
    Final result:                  Failed: see details below
      Exit code (Decimal):           -2068053929
      Exit facility code:            1212
      Exit error code:               87
      Exit message:                  Failed: see details below
      Start time:                    2014-03-18 14:59:31
      End time:                      2014-03-18 15:00:25
    === Verbose logging started: 3/19/2014  9:45:47  Build type: SHIP UNICODE 5.00.7601.00  Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
    MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
    MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
    === Verbose logging stopped: 3/19/2014  9:45:47 ===
    Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

    Hello,
    The following are a few things you can try:
    Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
    Try to unregister and register the Windows Installer with the following two commands:
    msiexec /unregister
    msiexec /regserver
    Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
    http://technet.microsoft.com/en-us/sysinternals/bb896645
    Share with us the error captured by Process Monitor.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?

    hi,
    Please help me..
    is it possible to install sql server 2008 standard edition in windows server 2008 enterprise edition?
    will any problem arise?

    Hiya,
    Yes it it possible. No there will not be any problems.
    Short and simple :)

  • Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

    h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
    Version: B
    Author: Dude, 24. May 2011
    The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
    Access to the Internet is required.
    The instructions cover the following additional topics:
    - Converting Red Hat based Oracle XE installer to Ubuntu.
    - Work-around for missing /sbin/chkconfig tool.
    - Install Oracle XE into a different directory or disk volume.
    - Relocate and configure the Oracle user and default login directory.
    - Uninstall, reconfigure and perform first database backup.
    - Notes and web links.
    - Troubleshooting
    h3. A) System Setup and Prerequisites
    h4. A.1. System Access
    You will need terminal command line, root and system console access to perform the setup tasks.
    To open a Terminal at the system console:
    Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
    sudo apt-get install openssh-server
    sudo passwd root
    Verify:
    ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
    The following is required in order to install Oracle 11gR2 XE:
    sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
    sudo apt-get install vimh4. A.3. System Swap space
    Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
    To analyze current swap space and memory configuration:
    sudo cat /proc/meminfo
    To install a 1 GB swapfile named swapfile in /, for example:
    sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
    (this may take a while)
    sudo mkswap /swapfile
    sudo swapon /swapfile
    sudo cp /etc/fstab /etc/fstab.orig
    sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
    Verify:
    sudo swapon -a
    sudo swapon -sh4. A.4. Kernel Parameters
    Oracle 11g XE requires the following additional kernel parameters:
    sudo nano /etc/sysctl.d/60-oracle.conf
    (Enter the following)
    # Oracle 11g XE kernel parameters
    fs.file-max=6815744
    net.ipv4.ip_local_port_range=9000 65000
    kernel.sem=250 32000 100 128
    kernel.shmmax=536870912
    (Save the file)
    Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
    Verify: sudo cat /etc/sysctl.d/60-oracle.conf
    Load new kernel parameters:
    sudo service procps start
    Verify:
    sudo sysctl -q fs.file-max
    -> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
    The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
    Install Oracle XE to separate disk volume:
    From the system console menu: System > Administration > Disk Utility
    Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
    Notice the device name e.g. /dev/sdb
    Get the drive UUID:
    sudo blkid
    e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
    Modify /etc/fstab to automatically mount the volume at system startup:
    sudo cp /etc/fstab /etc/fstab.original
    sudo nano /etc/fstab
    (Add the following, using determined UUID, for exmple)
    UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
    (Save the file)
    Create the mount-point, mount the new volume and set ownership and privileges:
    sudo mkdir /u01
    sudo mount -a
    sudo chown root:root /u01
    sudo chmod 755 /u01
    Verify:
    df -h
    or restart the systemYou can also install Oracle XE into a specific directory:
    Create a symbolic link to store the installation into an existing directory, for instance:
    sudo mkdir /home/oracle-xe
    sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
    h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
    Please see section E.3. to download the Oracle 11gR2 XE installer.
    Select the version listed for Linux x64.
    sudo unzip linux.x64_11gR2_OracleXE.zip
    sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
    (This may take a while)h4. C.2. Create a special chkconfig script
    The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
    Create /sbin/chconfig:
    sudo nano /sbin/chkconfig
    (Cut and paste the following)
    #!/bin/bash
    # Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
    file=/etc/init.d/oracle-xe
    if [[ ! `tail -n1 $file | grep INIT` ]]; then
       echo >> $file
       echo '### BEGIN INIT INFO' >> $file
       echo '# Provides:             OracleXE' >> $file
       echo '# Required-Start:       $remote_fs $syslog' >> $file
       echo '# Required-Stop:        $remote_fs $syslog' >> $file
       echo '# Default-Start:        2 3 4 5' >> $file
       echo '# Default-Stop:         0 1 6' >> $file
       echo '# Short-Description:    Oracle 11g Express Edition' >> $file
       echo '### END INIT INFO' >> $file
    fi
    update-rc.d oracle-xe defaults 80 01
    (Save the file)
    Set appropriate execute privileges:
    chmod 755 /sbin/chkconfig
    Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
    h4. C.3. Install and configure Oracle XE
    sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
    /etc/init.d/oracle-xe configure
    (This will take a while)
    Remove the /sbin/chkconfig script, which is no longer needed.
    sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
    The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
    Exit all Oracle user sessions:
    sudo /etc/init.d/oracle-xe stop
    sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
    sudo userdel oracle
    sudo useradd -s /bin/bash -G dba -g dba -m oracle
    sudo passwd oracle
    Verify:
    sudo id oracle
    -> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
    In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
    sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
    It is not essential to allow the Oracle user to use sudo, but it is convenient:
    usermod -G admin oracle
    Verify:
    id oracle
    -> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
    sudo su -
    -> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
    After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
    The following will correct the problem if necessary:
    Login as user Oracle or use:
    su - oracle
    sqlplus / as sysdba
    At the SQL prompt, enter the following command:
    EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
    exith3. D) Unintstall, Reconfigure and Troubleshooting
    h4. D.1. Uninstall Oracle 11g XE
    The following will completely uninstall and remove Oracle 11g XE:
    Login as user root:
    sudo su -
    /etc/init.d/oracle-xe stop
    dpkg --purge oracle-xe
    rm -r /u01/app
    rm /etc/default/oracle-xe
    update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
    Type the following in a terminal window:
    /etc/init.d/oracle-xe stop
    sudo rm /etc/default/oracle-xe
    /etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
    Login as user Oracle:
    su - oracle
    sqlplus / as sysdba
    At the SQL prompt, enter the following commands:
    shutdown immediate
    startup mount
    alter database archivelog;
    alter database open;
    exit
    Login to system console of the Oracle user account:
    Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
    h4. E.1. Oracle 11g XE limitiations overview
    - It will consume, at most, processing resources equivalent to one CPU.
    - Only one installation of Oracle Database XE can be performed on a single computer.
    - The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
    - The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
    - HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
    h4. E.2. Documentation and Links
    Official documentation for Oracle 11gR2 XE can be found at:
    http://www.oracle.com/pls/xe112/homepage
    h4. E.3. Oracle 11g XE downloads
    The Installer is available from the Oracle Technology Network at:
    http://www.oracle.com/technology/products/database/xe
    http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
    h4. E.4 APEX links and archives
    The APEX archives can be found at:
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
    The APEX download site is:
    http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
    h3. F) Troubleshooting
    ... in progress
    Regards and best of luck!
    Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

    even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
    The configuration script tells you "You must be root user to run the configure script. Login as root user and
    then run the configure script."
    This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
    Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

  • How to setup replication using Oracle 11gR2 standard edition one

    Dear Guys,
    I have two machines on which Oracle 11gR2 standard edition one is installed. I want to establish replication between them. How can I setup it? Please refer me to some step by step guide. I will be thankful to you guys.

    Replicating Data Using Materialized Views
    http://docs.oracle.com/cd/E14072_01/server.112/e10703/tdpii_reppit.htm#BEHHGGIB
    Replicating Read/Write Data Using Materialized Views
    http://docs.oracle.com/cd/E14072_01/server.112/e10703/tdpii_reppit.htm#BEHCEFGC

  • How to install oracle 11gR2 Grid Infrastructure for standalond server

    Hi Experts,
    we do not want to install ASM. under this condition, does any expert install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5 at file system?
    Please share tip and experiences of installed oracle 11gR2 as single instance include install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5. no one node RAC configuration.
    If we do not install 11gR2 Grid Infrastructure for standalone server . which function will be lost? restat server only?
    Thanks
    Jim

    Grid Infrastructure automatically uses Oracle Restart as default if you're installing Standalone. You can turn this off using crsctl ('disable has', I believe).
    According to the inference in the install docs (http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/oraclerestart.htm#CIHCBGCC), you can install 11gR2 without Grid Infrastructure, but you lose ASM and Restart.

  • Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

    Hi there,
    Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
    I had bunch of questions also asked in this Oracle forum like :
    Step by Step PeopleSoft HRMS Installation from scratch.
    Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
    Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
    http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
    Hope it helps to newbie's in PeopleSoft Apps like me.
    Regards,
    Vishal Mody
    Edited by: 897150 on Jan 25, 2012 10:11 AM
    Edited by: 897150 on Jan 25, 2012 10:13 AM

    Vijay
    I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
    You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
    The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
    I have to backup Nicolas in his saying.
    Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
    This does not say anything about the issue you are facing now.
    I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
    My advise:
    Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
    If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
    Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
    Hakan

  • Install Oracle 8i Personald Edition on Windows 2000 Server SP2

    Hi
    I have problem to install the Oracle 8i Personal Edition on
    Windows 2000 Server SP2.
    I run the Setup.exe, I become the message (not exactly) &#8220;JRE
    (Java Runtime Environment) was not found&#8230;&#8230; please visit
    www.javasoft.com&#8230;.. and install JRE version 1.1.7 or higher&#8230;&#8221;
    Now, I have download and install this JRE (JavaTM 2 Runtime
    Environment v 1.2.2_008 / Internationalized version of Java 2
    Runtime Environment).
    The error-messages comes again.
    Have everyone a idea?

    hi phill...
    why dont you try it out with the same CD and increase your RAM
    by another 64MB? This will be enough. The reason is , most
    Oracle 8i releases are combined with a java based Oracle
    Universal Installer. This requires some good amount of RAM. Just
    try it out with some extra memory. If this also didnt work, then
    send in the problem,error with your system config. This will
    help me in solving your problem.
    Imran.

  • Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

    Hello! 
    I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
    telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
    a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
    process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
    were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message: 
    Error container , type 0 
    Event name: AppHangXProcB1 
    Reply: No data 
    Ident CAB: 0 
    Problem signature: 
    P1: iexplore.exe 
    P2: 9.0.8112.16446 
    P3: 4fb57c8f 
    P4: 77c1 
    P5: 131200 
    P6: svchost.exe:AudioClientRpc 
    P7: 0.0.0.0 
    P8: 
    P9: 
    P10: 
    shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events. 
    Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
    work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
    that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
    Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
    but it is impossible for the "Remote Audio" device. 
    At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
    to an older version of Skype, but I would like to solve the problem completely. 

    Enable the Allow audio and video playback redirection Group Policy setting
    To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
    in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
    Console (GPMC).
    For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
    Is this policy applied? Refer:
    http://technet.microsoft.com/en-us/library/dd759165.aspx
    Also, have you tried update the audio device driver for this terminal server?

  • Oracle 10.2.0.1 Standard Edition on Windows Server 2003 R2 SP2 German vers.

    Hi,
    We got a "strange" error installing Oracle db on MS win Ser 2003. When the installation procedure created the database it stopped with Ora-604 and Ora-2248. My first thought was the language problem but I'm not sure.
    Below you'll see the trace.log
    If anyone can give me a clue, it would most appreciated !
    Thanks a lot,
    Jacques
    [main] [12:33:57:652] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
    [main] [12:33:57:652] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
    [main] [12:33:57:652] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
    [main] [12:33:57:668] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
    [main] [12:33:58:73] [Host.checkOPS:2053] Inside checkOPS
    [main] [12:33:58:73] [Host.checkOPS:2065] Trying to check cluster existence
    [main] [12:33:58:120] [Library.getInstance:95] Created instance of Library.
    [main] [12:33:58:120] [Library.load:195] Loading orauts.dll...
    [main] [12:33:58:120] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:120] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:120] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll
    [main] [12:33:58:120] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading MSVCR71.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\MSVCR71.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orawsec10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Library.load:195] Loading orasrvm10.dll...
    [main] [12:33:58:136] [Library.load:201] oracleHome D:\Programme\oracle\product\10.2.0\db_1
    [main] [12:33:58:136] [sPlatform.isHybrid:63] osName=Windows 2003 osArch=x86 rc=false
    [main] [12:33:58:136] [Library.load:220] Loading library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
    [main] [12:33:58:136] [Library.load:244] Loaded library D:\Programme\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
    D:\Programme\oracle\product\10.2.0\db_1\bin
    [main] [12:33:58:136] [Version.isPre10i:189] isPre10i.java: Returning FALSE
    [main] [12:33:58:136] [WindowsSystem.regKeyExists:997] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
    [main] [12:33:58:183] [WindowsSystem.getCSSConfigType:1154] configType=null
    [main] [12:33:58:183] [Host.checkOPS:2071] cluster existence:false
    [main] [12:33:58:183] [Host.checkOPS:2109] Cluster installed=false
    [main] [12:33:58:292] [InitParamHandler.endElement:506] CustomSGA flag: false
    [main] [12:33:58:292] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
    [main] [12:33:58:292] [InitParamHandler.endElement:508] Mem Percentage: 40
    [main] [12:33:58:292] [InitParamHandler.endElement:526] distributing Memory: 858993049
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
    [main] [12:33:58:292] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
    [main] [12:33:58:292] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
    [main] [12:33:58:308] [StorageAttributes.setAttribute:241] Current threadID=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
    [main] [12:33:58:308] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
    [main] [12:33:58:308] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
    [main] [12:33:58:308] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
    [main] [12:33:58:308] [TemplateManager.parseCloneTemplate:1474] See for any transportable datafiles in TemplateManager.....
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7177] setupOIDCommandlineParameters:
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7178] m_regWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7179] m_unregWithdirService: false
    [main] [12:33:58:308] [Host.setupOIDCommandlineParameters:7180] m_updateDirService: false
    [main] [12:33:58:308] [Verifier.processRawConfigFile:3523] StorageType == 0
    [main] [12:33:58:308] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:1950] updateDatafiles:datafileDir=D:\Programme\oracle\product\10.2.0\oradata
    [main] [12:33:58:308] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=1
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo01.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=2
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo02.log
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2096] From template, RedoLogGrName=3
    [main] [12:33:58:323] [TemplateManager.updateDatafileDestination:2111] new file name redo03.log
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
    [main] [12:33:58:323] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:323] [ProgressOnlyHost.performOperation:178] validateTemplate=true
    [main] [12:33:58:339] [OracleHome.isRacEnabled:147] bRacOn = false
    [main] [12:33:58:354] [Verifier.validateTemplate:1629] StorageType == 0
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\Programme\oracle\product\10.2.0\
    [main] [12:33:58:354] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
    [main] [12:33:58:479] [Host.executeSteps:4042] Executing steps....
    [main] [12:33:58:479] [Host.setUpForOperation:2918] setUpForOperation: Mode = 128
    [main] [12:33:58:479] [Host.executeSteps:4184] setupForOperation returned: true
    [main] [12:33:58:479] [Host.createStepSQLInterface:5946] sid =Rainbow
    [main] [12:33:58:495] [SQLEngine.getEnvParams:424] NLS_LANG: GERMAN_SWITZERLAND.WE8MSWIN1252
    [main] [12:33:58:495] [SQLEngine.initialize:241] Execing SQLPLUS/SVRMGR process...
    [main] [12:33:58:510] [SQLEngine.initialize:269] m_bReaderStarted: false
    [main] [12:33:58:510] [SQLEngine.initialize:273] Starting Reader Thread...
    [Thread-3] [12:33:58:901] [StepContext$ModeRunner.run:2458] ---- Progress Needed:=true
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-3] [12:33:59:88] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-3] [12:33:59:88] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-3] [12:33:59:88] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [12:33:59:88] [InitParamAttributes.sortParams:3525] m_sortOn:-1 sortOn:4
    [Thread-3] [12:33:59:244] [OracleHome.isRacEnabled:147] bRacOn = false
    [Thread-3] [12:33:59:244] [Host.noEntryinOratab:5113] Check made for oratab arg passed............
    [Thread-3] [12:33:59:244] [Oradim.getAddEntryCommand:353] AddEntry=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, RAINBOW, -startmode, manual, -spfile]
    [Thread-3] [12:34:0:492] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\Programme\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, RAINBOW, -startmode, auto, -srvcstart, system]
    [Thread-3] [12:34:0:680] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
    [Thread-3] [12:34:0:742] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@898540
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\Programme\oracle\product\10.2.0/flash_recovery_area
    [Thread-3] [12:34:0:742] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1743] old Spool = null
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1744] Setting Spool = D:\Programme\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\Rainbow\CloneRmanRestore.log
    [Thread-3] [12:34:1:476] [SQLEngine.setSpool:1745] Is spool appendable? --> true
    [Thread-3] [12:34:1:476] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\Programme\oracle\product\10.2.0/admin/Rainbow/pfile/init.ora
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@898540:messageHandler
    [Thread-1] [12:34:4:35] [BasicStep.handleNonIgnorableError:431] ORA-00604: error occurred at recursive SQL level 1
    ORA-02248: invalid option for ALTER SESSION
    :msg
    ************************************************************

    Yes, there's a known problem, not with german language, but with territory Switzerland, see on metalink:
    ORA-604 / ORA-02248 WITH NLS_LANG SET TO TERRITORY SWITZERLAND
    Doc ID: 334481.1
    ORA-02248 is only the last error, you have others:
    StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01092
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-01034
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-03114
    Thread-3 12:33:59:88 StepErrorHandler.setFatalErrors:322 setting Fatal Error: ORA-12560
    Thread-3 12:33:59:88 StepErrorHandler.setIgnorableErrors:250 setting Ignorable Error: ORA-01109
    Not sure whether this related to the same problem. As a workaround you may change the territory, for example to GERMANY. If that works you hit the bug mentioned in the metalink not. Normally NLS_LANG is set in the registry.
    Werner

  • Install Oracle 9i Standard Edition on Linux AS 2.1

    I have installed Oracle 9i R2(9.2.0) Standard Edition on Red Hat Linux AS 2.1
    When I checked the version:
    Select * from V$Version the result was :
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    I don't understand what happened , why in V$Version not appear Standard Edition which I have installed?
    Thank you very much,
    Sorin

    Please, see your logs in ./OraInventory/logs/InstallActions...log
    At the end of this documents, you can see extended info about your that error.
    Paste this info here, if you can´t see a solution.

  • Installing Oracle 10.2.0 on Windows Server 2008 64bit

    Dear all(s)
    Recently i am running production database 10.2.0 on windows server 2003 32 bit. there is some memory limits and i cannot set SGA,PGA > 2 GB.
    I want to mode production database 10.2.0 on windows server 2003 64 bit, please guide me in following topics:
    1. What steps i have to take for moving database from 32bit to 64bit
    2. After moving database on Microsoft windows server 2003 64bit, i can set SGA,PGA more than 4 to 6 GB
    3. How much SGA,PGA i can configure
    4. Dataguard also configured on another server for production database.
    5. I have to again setup dataguard on 64bit.
    6. What others seniors which i have to meet.
    Waiting for response
    Naeem Sheeraz
    Faisababad, Pakistan

    Naeem,
    +1. What steps i have to take for moving database from 32bit to 64bit+
    You can make use of conventional export/import, investigate using data pump, transportable tablespaces, and RMAN backup/restore. Simplest will busing e conventional export/import
    +2. After moving database on Microsoft windows server 2003 64bit, i can set SGA,PGA more than 4 to 6 GB+
    I think you can go beyond 6gb may be upto 20gb (if system can hold that much :))
    +3. How much SGA,PGA i can configure+
    Depending upon your requirement, what kind of work you are doing database, large queries, lots of DML activities, transactions., how many users simultaneously (at the same time) will access your database?
    +4. Dataguard also configured on another server for production database.+
    +5. I have to again setup dataguard on 64bit.+
    YOu should follow the same setup as your primary setup for same kind of services and performance
    6. What others seniors which i have to meet.
    I didn't understand what do you mean? Do you mean requriement?
    Regards

Maybe you are looking for