Installing oracle application express

hi,
My administrators have installed oracle app server 10g and oracle http server is up and running on the linux server..
Do i have to download and install oracle application express on the client machine(where i have to develop the applications) or download it to the server??
Thanks

The Apex installation is essentially two things -
1) Installation of the Oracle HTTP Server (essentially Apache with the mod_plsql module installed, plus some other custom things)
2) Installation of the packages/procedures/functions into the database (you do this by connecting to the DB and running a script).
So, unless you are running the database on your laptop, you wouldn't be installing Apex on your laptop, you would be installing it from your laptop.
You can install from your laptop if you can connect to the DB from it, personally I usually prefer to install from the actual server itself, for two reasons -
1) It's generally faster since you don't need to send things across the network
2) It minimizes the chance of any networking errors part way through the install (such as someone pulling the wrong network cable out of the patchbox for example).
That's just a personal view however, you should be able to install from your laptop just fine.

Similar Messages

Need help on installing Oracle Application express 3.2

Hi,
I had downloaded Oracle 11g database and installed the personal edition.I got the Enterprise manager login page working and also the DBConsole
I had Downloaded APEX 3.2 and wanted to install apex 3.2.I wanted to do the following scenario
Scenario 3: Install from the Database and Configure the Embedded PL/SQL
Gateway
Planning to do these steps: ( I have few questions on these steps and are below each step)
■ Running the apxconf.sql Configuration Script
Do I have to install Oracle Application express or is it already installed in 11g personal edition?
Do I have to create a seperate database or schema for this step( I have only one instance orcl1) ?■ Verifying the Oracle XML DB HTTP Server Port
Can I do this step in my current orcl1 instance,if so which user■ Enabling Oracle XML DB HTTP Server
Once I carry out these steps, Can I access the admin page for apex with https://localhost:port/apex_admin ?
Am I missing any other steps ?
Thanks

I have one idea..
Try to install again:
1) download and unzip apex_3.2 in $ORACLE_HOME
You will have:
$ORACLE_HOME/apex - old directory
$ORACLE_HOME/apex_3.2 - new directory
2) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apexins tablespace_apex tablespace_files tablespace_temp images
Where:
tablespace_apex is the name of the tablespace for the Oracle Application Express application user.
tablespace_files is the name of the tablespace for the Oracle Application Express files user.
tablespace_temp is the name of the temporary tablespace.
images is the virtual directory for Oracle Application Express images. To support future Oracle Application Express upgrades, define the virtual image directory as /i/.
Example:
@apexins SYSAUX SYSAUX TEMP /i/
3) check installation log for errors
4) in command line go to $ORACLE_HOME/apex_3.2/apex
run sqlplus "/as sysdba"
in sqlplus run @apxconf
set admin password
set port
5) run @apxldimg.sql $ORACLE_HOME/apex_3.2
6) check for running listener and try to login apex: http:\\host:port\apex\apex_admin
Good luck!

Installing oracle application express from the database with oracle 11g

Hi,
I installed oracle 11g release 1 and trying to install oracle APEX from the database with Embedded PL/SQL gateway. The installation guide require grant connect privilege to any host for the APEX_030200 database user, but this schema does not exist in the database...
How to continue the installation of APEX ?

Thanks Hari,
But I need to enable network services in my database (oracle 11g).
Do I have to replace in the PL/SQL script below apex_030200 by flows_030000 ?
DECLARE
ACL_PATH VARCHAR2(4000);
ACL_ID RAW(16);
BEGIN
-- Look for the ACL currently assigned to '*' and give APEX_030200
-- the "connect" privilege if APEX_030200 does not have the privilege yet.
SELECT ACL INTO ACL_PATH FROM DBA_NETWORK_ACLS
WHERE HOST = '*' AND LOWER_PORT IS NULL AND UPPER_PORT IS NULL;
-- Before checking the privilege, ensure that the ACL is valid
-- (for example, does not contain stale references to dropped users).
-- If it does, the following exception will be raised:
-- ORA-44416: Invalid ACL: Unresolved principal 'APEX_030200'
-- ORA-06512: at "XDB.DBMS_XDBZ", line ...
SELECT SYS_OP_R2O(extractValue(P.RES, '/Resource/XMLRef')) INTO ACL_ID
FROM XDB.XDB$ACL A, PATH_VIEW P
WHERE extractValue(P.RES, '/Resource/XMLRef') = REF(A) AND
EQUALS_PATH(P.RES, ACL_PATH) = 1;
DBMS_XDBZ.ValidateACL(ACL_ID);
IF DBMS_NETWORK_ACL_ADMIN.CHECK_PRIVILEGE(ACL_PATH, 'APEX_030200', 'connect') IS NULL THEN
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE(ACL_PATH,'APEX_030200', TRUE, 'connect');
END IF;
EXCEPTION
-- When no ACL has been assigned to '*'.
WHEN NO_DATA_FOUND THEN
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('power_users.xml','ACL that lets power users to connect to everywhere',
'APEX_030200', TRUE, 'connect');
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('power_users.xml','*');
END;
COMMIT;
Regards

Problem with apex listener install on Oracle Application Express 4.2.3

I have installed Oracle Application Express 4.2.3
Then i tried to install apex listener Oracle APEX Listener 2.0.5
but it dos not work.
I ask
It is possibile to install WebLogic Server 12c or 11c
and connect it to apex ??

Hi;
Please check Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 [ID 393931.1] and compare it wiht your steps
Regard
Helios

Can not login to Oracle Application Express after upgrade to 3.2

I installed oracle database express and then I upgrade APEX to 3.2 on it. I got the login page but I can not login by using any account, like SYS, SYSTEM. From the document, internal ADMIN account should exist but I did not see it from dba_users table.
Thanks,
Julie

HI Don,
I did run apxchpwd.sql to change the Application Express ADMIN user password. Then I invoked http://mymachine:8080/apex and got the Application Express login page. I put ADMIN in workspace and ADMIN in Username and the new password. But I still cannot login. I also tried http://mymachine:8080/apex/apex_admin page login. I typed ADMIN as username and the new password. Then I clicked on Login button. Nothing happened. No error message.
Any idea?
By the way, what does apxxepwd.sql do?
Thanks,
Julie

Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto

h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
   echo >> $file
   echo '### BEGIN INIT INFO' >> $file
   echo '# Provides:             OracleXE' >> $file
   echo '# Required-Start:       $remote_fs $syslog' >> $file
   echo '# Required-Stop:        $remote_fs $syslog' >> $file
   echo '# Default-Start:        2 3 4 5' >> $file
   echo '# Default-Stop:         0 1 6' >> $file
   echo '# Short-Description:    Oracle 11g Express Edition' >> $file
   echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.

even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.

Unable Logging in to Oracle Application Express Administration Services

I am new for DB. Installed Oracle XE, followed the instruction "Logging in to Oracle Application Express Administration Services", I can not find the login page:
http://127.0.0.1:7777/pls/apex/apex_admin
I work on the PC in which XE installed.
Where are these two files
ORACLE_BASE\ORACLE_HOME\install\portlist.ini
ORACLE_BASE\ORACLE_HOME\Apache\Apache\conf\httpd.conf
I did a search, can't find them.
Any help welcome.
Thanks.

The default port for the Apex webserver is 8080, not 7777.
To access the XE Database GUI from the Start menu, select Programs (or All Programs), then Oracle Database 10g Express Edition, and then Go to Database Home Page. (I'm assuming your on Windows)
Or try: http://localhost:8080/apex in your browser.
The files you mention relate to Apache web server. Oracle XE does not include a Apache, it's web server is built into the database. Are you sure you're following the right documentation? See http://www.oracle.com/pls/xe102/homepage
Hope this helps.

How do I create "Oracle Application Express Adminstrator" in APEX 3.2.1?

Hello,
Quite the newbie so I appreciate any assistance with this.
How do create "Oracle Application Express Adminstrator" in APEX 3.2.1? I am not talking about a workspace adminstrator but an Entire APEX instance administrator or "superuser"?
I log into APEX_ADMIN as ADMIN and understand how to create a new user. But how do I grant the new user DBA or "super user" privlidges? It was easy to do when I first installed XE, I would just "check" the "DBA" when I created the user. But when I upgraded to APEX 3.2.1 the function does not seem to be there?
Thank you for any help you can provide!

Hi,
I think you can not grant DBA role from Apex anymore.
You need connect to database e.g. with SYS user and grant that role.
http://www.oracle.com/technology/products/database/application_express/html/3.2_and_xe.html
Br, Jari

How to stop and start only the process of Oracle Application Express?

I'd like to know how to stop the process of Oracle Application Express on my server installed oracle express package.
After installed Oracle Express edition, not only oracle database server processes but also Oracle Application Express, such as http server, is started automatically...
I hope to stop and start Application Express on demand but is this feature enabled?

Oracle Apex is an API, if that helps you understand / visualize. You do not start Apex process nor stop it.
When an Apex session starts it starts calling the API.
You can however start / stop the listener. It may be OHS, ApexListener and the J2EE container running it, OC4J or any other "server" that you are using.
The built-in EPG is something like an API again, you cannot start / stop it but you can disable/enable it with DBMS_XDB.SETHTTPPORT API.
Regards,

Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
# sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
The error I had got is as follows:
Preparing.....#####################[100%]
1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
The Previous Query is as follows:
Thanks For Guiding Me All of you!
Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
Now, I am having the following problems:
After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
" The connection was refused when attempting to contact 127.0.0.1:8080 "
2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
ORA-01034 : Oracle not available
ORA-27101: Shared Memory realm does not exist
Linux Error:2:No such file or directory
3. When I try to manually start the Listener or Services, It gives one more error:
Root Not a Member of DBA Group
I need to What is happening or What is the Problem and How will I rectify them?

Oracle Application Express 3.0 and Ajax

Can we build Web 2.0 (ajax) application in Oracle Application Express 3.0?
- Open discussion
- Resources links welcome
Please contribute your thoughts thank you.

Hello,
All the examples in the documentation that he pointed you at are from this application.
It can be downloaded from here and installed.
http://apex.oracle.com/pls/otn/f?p=11933:22
You can also go to individual example pages ans most of them have the relevant code and links back to the forum thread that asked for that particular example.
Here is the overview page for the APEX ajax framework http://apex.oracle.com/pls/otn/f?p=11933:63
and here is the most basic example
http://apex.oracle.com/pls/otn/f?p=11933:11
This sample application has some Ajax features
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#DOC_LIB
and these sample code example also take advantage of Ajax.
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#LARGE
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#STICKY
Past that I recommend you just start playing with it. Once you have the framework figured out, which doesn't take long, you can build Ajax features very quickly.
Carl

Is Oracle Application Express the same of Oracle Database Express Edition (

Hi,
perhaps a silly question.
I've tried to download Oracle Application Express. Before of installing it, I've noticed that looking at the About the Create Application Manual it looks like the Application Builder that I already use with the web-based page for Oracle Database 10g XE (Express Edition). But thus is Oracle Application Express the same of using Application Builder of Oracle Database 10g XE? To me it seems so, but I'd like to be sure of that
Thanks!

oracle database XE 10g include APEX installed, version 2.... i don't remember exactly
Oracle database sinde 11g includes APEX installed too
Yes, APEX have a tab with application builder, there you create applications, but the version is very old, install Oracle DB XE 11g or upgrade APEX

Installed Oracle database express edition but not can't access c: drive

I downloaded and installed oracle 10g express edition (universal) on my windows 7 64bit computer and went through the set up but I changed the default installed path to just c: drive (thinking it would create a folder by itself). After finishing the installation, my c: drive shows zero gb. When I try to open my c: drive I get a message saying "c:\ is not accessible. Access denied." All my files are there as i used folder shortcuts to access them. I tried uninstalling oracle but hit an error saying:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is valid Windows installer package."
I can't install any programs or save/copy to any folder in my c: drive but I can save/copy to desktop.
Please help by any means, thanks.
Edited by: 796973 on Sep 23, 2010 9:19 PM

796973 wrote:
Please help by any means, thanks.
This happens when you don't follow the installation guide and think you are smarter then the software.
When the installer warned you that the installation path you were choosing was not empty and asked you if you wanted to install anyway...You answered YES!
Now you lost you drive c: file system.
Tough luck!
:p

Error in marvel.conf file in Oracle Application Express 2.2

Hi All..
i have installed.. oracle 10g database , then installed oracle application server 10g 10.1.3
and then installing.. Oracle Application Express 2.2(APEX) , i have successfully installed APEX as instruction of documentation included in installation..
but i am getting error in.. marvel.conf file.. after creating marvel.conf file i am unable to stop or start Oracle Application Server or Oracle HTTP server ..
marvel.conf file Content as below..
Alias /i/ "D:\Oracle\Oracle10gAs\Apache\Apache\Images"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString Workshop2.jbdomain:1521:Ora10g ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>
i have also include path in httpd.conf
include "D:\Oracle\Oracle10gAs\Apache\modplsql\conf\marvel.conf"
after that i am going to stop or start HTTP Server i am getting error like thi..
"Syntax error on line 16 of d:/oracle/oracle10gas/apache/modplsql/conf/marvel.conf:
Invalid command 'PlsqlDocumentPath', perhaps mis-spelled or defined by a module not included in the server configuration"
Please.. Help..

I also have been puzzling around in the marvel.conf for hours yesturday, since I did not get the login-screen as well. Finally I found the solution (in the documentation of the DAD_README) : I removed the word "ServiceNameFormat", restarted the server and it worked. Maybe thes string is confusing the server.....
Jan.

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Installing oracle application express

Similar Messages

Maybe you are looking for