Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Dear All,
My Linux version is RedHat 5.3
I want to Install oracle 10g Application Server on it please help me out to do so.
Please help me,thanks in advance.
Please provide me with the documentation link to install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Thanks and Regards
Monoj Das

install Oracle Application Server 10g 10.1.2.0.2 on RHEL5.3
Said that OAS 10.1.2.0.2 is desupported, you have to apply patch 10.1.2.3 to be fully certified on OEL/RHEL 5.
See MOS doc. ID 564174.1 Oracle Application Server 10g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

Similar Messages

Installed Oracle Application Server 10g and Dev. Suite 10g to self practice

Hello,
I have Installed Oracle Application Server 10g and Developer Suite 10g on Windows XP 32.bit to practice Developer suite specially Forms and reports. Server has created the database by default.
My questions are:
1. Can i use default database for practice?
2. Which Configuration Assistants mainly i need to configure in this regard?
3. Do i need to install anything else?
I am newbie to Oracle trying to self learning.
Any help will b appreciated.
With regards,
MOHAMMED AJAZ.

hi
open the following pdf it will help u too.
http://students.heinz.cmu.edu/docs/Oracle_10g_R2_Installation.pdf
Can i use default database for practice?
Did u install oracle database? if not then it will be better please install.
sarah

Could I install Oracle Application Server 10g 10.1.2.0.2 x64

Dear Sir,
I have one server installed by Windows 2003 X64 and EM64T (Core 2 Duo Intel CPU).
Could it be workable to install Oracle Application Server 10g 10.1.2.0.2 (Itanium version) on
it (Windows 2003 X64 and EM64T (Core 2 Duo Intel CPU)) ?
Thank you very much...
Ke

Note that (as it is stated in the above certification matrix, point #19), you can only install a mid-tier instance there. Infrastructure installation type is not supported on it.
Thanks
Shail

Need help in installing Oracle Application Server 10g Rel Wireless Portion

I am trying to install the OAP and need to enable or configure the wireless portion of it. I got this cpio file from Oracle site (as_linux_x86_101300_disk1.cpio & as_linux_x86_101300_disk2.cpio) and installed the OAP. I don't see any option to enable the wireless portion. runInstaller is showing only the basic installer option ( IntegratedWebserver,J2EE Server,Process Management). I have my OAP server running now and this on RedHat AS3.
Oracle Application Server 10g Release 3 (10.1.3.0.0)
Need help!!
- G -

You might find better assistance in the APplication Server forum - Oracle Application Server - General

Install Oracle Application Server 10g(10.1.2) on Linux (AS 4.0)

Hi all,
I am trying to install Oracle Application Server Form and Report Services on Linux (Application Server 4.0).
Following the user manual (B19314-02 ), but I don't know how to download and update Red Hat Enterprise Linux AS release 4 (Update 1) and requirement packages as: glibc-2.3.4-2.9
glibc-common-2.3.4-2.9
binutils-2.15.92.0.2-13
compat-libstdc++-296-2.96-132.7.2
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
libstdc++-3.4.3-22.1
libstdc++-devel-3.4.3-22.1
openmotif21-2.1.30-11.RHEL4.4
pdksh-5.2.14-30
setarch-1.6-1
make-3.80-5
gnome-libs-1.4.1.2.90-44.1
sysstat-5.0.5-1
compat-db-4.1.25-9
control-center-2.8.0-12
xscreensaver-4.18-5.rhel4.2
Please show me!
Thanks.

Hi all,
I tried to download requirement packages:
glibc-common-2.3.4-2.9
binutils-2.15.92.0.2-13
compat-libstdc++-296-2.96-132.7.2
gcc-3.4.3-22.1
gcc-c++-3.4.3-22.1
libstdc++-3.4.3-22.1
libstdc++-devel-3.4.3-22.1
openmotif21-2.1.30-11.RHEL4.4
pdksh-5.2.14-30
setarch-1.6-1
make-3.80-5
gnome-libs-1.4.1.2.90-44.1
sysstat-5.0.5-1
compat-db-4.1.25-9
control-center-2.8.0-12
xscreensaver-4.18-5.rhel4.2
from ftp://ftp.redhat.com/pub/redhat/linux/enterprise/4/en/os/i386/SRPMS/
But when I installed packages, it was not successfull:
# rpm -Uvh gcc-3.4.3-22.1.src.rpm
warning: gcc-3.4.3-22.1.src.rpm: V3 DSA signature: NOKEY, key ID db42a60e
1:gcc ########################################### [100%]
# rpm -q gcc-3.4.3-22.1.srcpackage gcc-3.4.3-22.1.src is not installed
Please help me!

Install Oracle Application server 10g and Oracle database 10g on same box

Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-Raghav

Jacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices)

Installing Oracle Application Server 10g 101202 on Windows 2008 64 bit

Hi All,
what i need to do is install this software like this:
installing Oracle Infrastructure to handel Sessions as db for oracle forms & reports
install Oracle Forms & Reports Service as Middle-Tire on the same machine in defirent home
configure my report server as i require it to work with rdf files in spechial folders
i have done this installation more than i can remember in Windows 2003 R2 SP2 32 bit
but for Windows Server 2008 i am facing some problem that there is no software avilable for 64 bit or Windows 2008 in Oracle Download Site
Spechilaly when my server is not itanum !
Can any one point me to the right download page if avilable or another solution for this problem
i don't think that oracle have stopped support for this product spechilaly when the reports generated by Oracle Report Service is far to good and fast with Oracle Database
Best Regards
Ibrahim

Hi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM

Install developer10g and oracle application server 10g on oracle linux R6

i want install oracle application server 10g on oracle linux R6
in same server oracle database 10 g installed
the database 10g installed and work fine.
i try install oracle developer 10g installed .succ
but the frmbld.sh didnt work
./frmbld.sh :line 105 :/u01/u03/app/oracle/product/10.2.0/db_1/bin/frmbld:cannot execute binary file?
have two user oracle for database ,oradev for developer

thx
can give me any link
any one can help me on application server 10 in oracle linux R6?

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle application server 10g and apex

Hi allm
Can someone show me a guide on how to use Oracle Application Server 10g with APEX. I'm currently using Oracle HTTP Server but decided to use OAS instead so that I can use the Report Server and the Oracle BI Publisher for the reports.
I'm currently using this guide (http://www.oracle.com/technology/products/database/application_express/howtos/howto_useoas10g.html) but I can't seem to find the marvel.conf and the oracle_apache.conf.
Also, is it really necessary to use OAS instead of Oracle HTTP Server if I want to use Oracle BI Publisher?
Thanks.
Allen
Edited by: A.Sandiego on Sep 3, 2008 12:01 AM

Hi,
Thanks for the response.
Unfortunately I still get the same problem. Somehow I just can't find the marvel.conf anywhere in my machine. I setup my APEX not by using the companion cd but by downloading the apex_3.1.2 then running the apexins.sql. Then install the Oracle HTTP Server only and configured the dads.conf located in the ORACLE_HTTP_SERVER_HOME/Apache/Apache/mod_plsql/conf. It works perfectly with this.
I then installed Oracle Application Server 10g. I'm trying to figure out how to use this instead of the Oracle HTTP Server.
Thanks.
Allen

Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL

HI,
EBS-12.1.3
DB 11gR1
I am Facing following Error: while installing Oracle Application Server 10g Release 2 (10.1.2.0.2) on 64bit RHEL
pwd
pwd
/shared/bishiphome/Disk1/install/linux64
[oravis@erptest linux64]$./runInstaller -ignoreSysPreReqs
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-20_08-52-57AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2011-07-20_08-52-57AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
Should i install JRE in the Server
Thanks
Vishwa
Edited by: Vi**** on Jul 19, 2011 10:18 PM
Edited by: Vishwa on Jul 25, 2011 3:30 AM

HI,
Change the above to the following and see if you get any error:
$ /shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr/shared/bishiphome/Disk1/install/linux64/runInstaller ignoreSysPrereqs -jreLoc /usr
Starting Oracle Universal Installer...
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-07-26_08-46-15AM. Please wait ...[oravis@erptest ~]$ Exception in thread "main" java.lang.ClassFormatError: oracle.as.install.engine.modules.install.exception.InvalidInventoryPointerException (unrecognized class file version)
at java.lang.VMClassLoader.defineClass(libgcj.so.7rh)
at java.lang.ClassLoader.defineClass(libgcj.so.7rh)
at java.security.SecureClassLoader.defineClass(libgcj.so.7rh)
at java.net.URLClassLoader.findClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at java.lang.ClassLoader.loadClass(libgcj.so.7rh)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:488)

Oracle Application Server 10g R3 with patch set 10.1.3.5.0

Hi All,
Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
Please help me.
Regards,

Hi James,
1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
    http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
     Note: Oracle Application Server supports only those browsers.
2)Forms only support Windows 7 32 bit only.
    Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
Regards,
Prakash.

Oracle Application server 10g on vista

Hi Freinds,
AMD 64 bit processor running os vista 34 bit.
I want to install oracle application server 10g on windows Vista. when i run the set up its giving me an error but oracle certification table shows its vertified on vista.
erro message:
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
looking forward to your advising.
Thanks in advance :)

What version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail

Oracle Application Server 10g R2 installation on Oracle Enterprise Linux 5

Hi there ...
I want to install Oracle Application Server 10g R2 on Oracle Enterprise Linux 5. Can I get an installation instructions (or steps) for that?
Oracle installation guide mentions Suse 9 & 8 and Red hat 3 & 2. There is nothing related to Oracle Enterprise Linux 5 or 4?
Thanks

Yes there is one for 10gR3 too:
Note:465159.1 Oracle Application Server 10g (10.1.3) Requirements for Linux OEL 5 and RHEL 5
Thanks
Shail

Oracle Application Server 10g on a virtual environment

Hi,
Can anyone provide us the Step by Step approch to install Oracle Application Server 10g on a virtual environment on solaris cluster?

HI,
Oracle is provided two documents for OAS install in Solaris (32bit and 64bit).
Here I am providing both documents.
http://docs.oracle.com/cd/B31017_01/solx86.1013/install.pdf --- Oracle app server install 32bit
http://docs.oracle.com/cd/B31017_01/sol.1013/install.pdf -- orcle app server install 64bit
Award points it is useful.
Thanks,
satya

Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

Similar Messages

Maybe you are looking for