Installing SAP ERP on DB2 with high availability
Hey Gurus,
currently we're installing SAP ERP 6 EHP 6 based on DB2 for unix and windows, this is done using the high availability option on AIX 7.1 and IBM's power HA.
We have the following architecture:
Node A:
1-A host for ASCS, ERS and CI.
2-A host for the DB instance.
The same with node B replacing CI with DI.
Please advise on how to proceed with installation.
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Thanks in advance
Hi Ahmed,
For your query
Also I need a bit of clarification regarding how to share (or export) the file systems between the hosts of the same node so that the CI can and DB can be connected, since as far as I know the DB installation will ask for the profile directory through the installation, while the CI will ask to see the db file systems as well as the db instance.
Please refer installation guide sections related to file system planning.
Here you can see the file system directory structure as well as information on which filesystems to be shared.
Attached are some screenshot for reference
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
Install SAP ERP 6.0 with Linux and Oracle RAC
Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
o You can use "Physical Standby".
o You cannot use "Logical Standby".
o You can use Data Guard Broker.
o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende -
Install SAP ERP 6.0 with EHP7 - Inst Master ???
Hi All,
I've downloaded all necessary files need for EHP7 FOR SAP ERP 6.0 IDES Version.
The downloaded files are listed below.
NW 7.0 Presentation - 7.30 Compilation 3
NW 7.0 Presentation - Adobe LiveCycle Designer 9.0
RDBMS MSSQLSRV 2012 SP01 CU7 1/8
RDBMS MSSQLSRV 2012 SP01 CU7 2/8
RDBMS MSSQLSRV 2012 SP01 CU7 3/8
RDBMS MSSQLSRV 2012 SP01 CU7 4/8
RDBMS MSSQLSRV 2012 SP01 CU7 5/8
RDBMS MSSQLSRV 2012 SP01 CU7 6/8
RDBMS MSSQLSRV 2012 SP01 CU7 7/8
RDBMS MSSQLSRV 2012 SP01 CU7 8/8
SAP Kernel 7.41 Windows Server on x64 64bit
IDES SAP ERP 6.0 EHP7 Inst. Export 1/14
IDES SAP ERP 6.0 EHP7 Inst. Export 2/14
IDES SAP ERP 6.0 EHP7 Inst. Export 3/14
IDES SAP ERP 6.0 EHP7 Inst. Export 4/14
IDES SAP ERP 6.0 EHP7 Inst. Export 5/14
IDES SAP ERP 6.0 EHP7 Inst. Export 6/14
IDES SAP ERP 6.0 EHP7 Inst. Export 7/14
IDES SAP ERP 6.0 EHP7 Inst. Export 8/14
IDES SAP ERP 6.0 EHP7 Inst. Export 9/14
IDES SAP ERP 6.0 EHP7 Inst. Export 10/14
IDES SAP ERP 6.0 EHP7 Inst. Export 11/14
IDES SAP ERP 6.0 EHP7 Inst. Export 12/14
IDES SAP ERP 6.0 EHP7 Inst. Export 13/14
IDES SAP ERP 6.0 EHP7 Inst. Export 14/14
I don't find Inst.Master which is required to start up the installation. Where to download it and what specific version I need to download for EHP7 for SAP ERP 6.0 IDES ?
Are there any JAVA COMPONENTS that I need to download before starting installation like Java Component BS2005SR3 or Java Component NW 7.0 SR3 ?? and SAP ERP 6.0 SR3 Components for EHP3 do we have similar components for EHP7 ?
Can anyone tell me what type of collation I need to select when installing the MSSQL Server 2012 and which Operating system is best suitable for SAP IDES 6.0 with EHP7 on MSSQL Server 2012 ?
I have JAVA from Oracle version 1.4.2 and policy file or whcih version of JAVA is suitable for installation ? Is it possible to do the install with latest JRE available ?
Will appreciate rewards for best support.
Regards,
Gowri ShankarHi Tomas,
Good day, as per you advice. I manage to go thru the IDES installation but its stuck on 19 of 34 (Import ABAP) with error code 2.
Below are the text written in ECC Message Box.
An error occurred while processing option SAP Business Suite 7i 2013 Support Release 1 > EHP7 for SAP ERP 6.0 ABAP Support Release 1 > Oracle > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Process call 'D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.). You can now:
Choose Retry
to repeat the current step.
Choose Log Files
to get more information about the error.
Stop the option and continue later.
Log files are written to C:\Program Files/sapinst_instdir/BS2013/BS2013SR1/ERP607SR1/ORA/INSTALL/STD/ABAP.
Below are the logs from R3load.exe:-
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20141006062234
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/741_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: version R7.40/V1.8 [UNICODE]
Compiled Nov 23 2013 13:31:32
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.009) Support for SUM/ZDM and DMO (note 1778564)
DBSL patchinfo (patches.h): (0.011) DBSL error corrections in 7.41: (4) LOBs (note 1928526)
--------------------- End of patch information -------------------------
process id 4612
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: db_connect rc = 256
DbSl Trace: Connect via SAPUSER not supported for kernel >= 740.
(DB) ERROR: DbSlErrorMsg rc = 29
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20141006062234
I've created new thread for this issue at Error in SAP installation in phase 19 of 34 - Import ABAP
Looking forward for your reply.
Regards,
Jay
-96-
Message was edited by: Jay Jay -
How to change minimum data size of MaxDB while installing SAP ERP 6.0
I am installing SAP ERP 6.0 with MaxDB on a Linux system.
The installation document says the minimum size of SAP data is 70 GB.
But while installing the minimum Data size is showing as 240000 MB (240 GB).
On what parameter/system attribute this value of "Minimum data size" depends?
If possible how can we change this value?Hi Deepak,
I created these on three LVM logical volumes on Linux.
But while installing in "Create database instance" phase I got below error:
Error in log file:
class com.sap.sdb.sllib.utils.DbCommand | <DBMException -24988 ERR_SQL SQL error
-902,I/O error
3,Database state: OFFLINE
6,Internal errorcode, Error code 9050 "disk_not_accessible"
20030,Formatting of data area failed>
What could be the reason behind this? is it because I used logical volumes instead of raw disks OR
the size of logical volumes?
I created 3 logical volumes. two of them with size 125GB each and one with 30 GB.
What should be the appropriate size of each volumes for minimum data size 240GB?
Regards,
Swap -
Installing SAP ERP Net Weaver application server
Dear,
I am newcomer in SAP ERP industry, so i would like to practice more at home after which i learned in University.
I want to install SAP ERP application at home which is run offline ( which could be adjusted as i want ) not via web browser like I am usually doing that.
I have workstation laptop , I think it will run well.
Or you can instruct me more.
Thanks allHi Binh,
You could check with SCN thread Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
Getting started with Netweaver 7.3 portal Part 1-Installation
Hope this will also help you.
Good luck !! -
How to install SAP ERP 6.0/NW 7.01 Language VI, LT, LV, ET on CD51037843
Dear Expert !
Please help me about how to install SAP ERP 6.0/NW 7.01 Language VI, LT, LV, ET on CD51037843. I hope, you are going support for me as soon as possible !
Thank and Best Regards,
Tru HangHi,
Go through the below links they have defined very good procedure to import languages.
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/67/237bd395da11d384bb0060975b04f3/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/content.htm
-Srini -
Steps to install SAP 4.7 EE with MS SQL 2000: URGENT
Hi all Basis Guru's
We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
Also is it neessary for me to install the SP3 for Ms SQL 2000.
Reward points for sure...
Plz do help me in this as, this task has to be completed by 03-08-07 EOD.
Million Thanks in Advance
Regards
Hari Haran.VHi Juan,
I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
but i get an error during the installation of the CI...(this is happening at the time of <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
Here is the detailed LOG of the error.....
INFO 2007-08-02 18:50:39
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-08-02 18:50:47
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Product Version ...
INFO 2007-08-02 18:51:13
Script "Product Version" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Patch ...
INFO 2007-08-02 18:51:13
Script "Product Patch" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Edition ...
INFO 2007-08-02 18:51:13
Script "Product Edition" successfully executed
INFO 2007-08-02 18:51:13
Executing check Collation ...
INFO 2007-08-02 18:51:13
Script "Collation" successfully executed
INFO 2007-08-02 18:51:13
Executing check SysAdmin Rights ...
INFO 2007-08-02 18:51:13
Script "SysAdmin Rights" successfully executed
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Database existance ...
INFO 2007-08-02 18:51:13
Script "Database existance" successfully executed
INFO[E] 2007-08-02 18:51:36
Account group="pdplmain\SAP_LDAP" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_DBA" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_OPER" does not exist. <#1>
INFO[E] 2007-08-02 18:51:49
Account group="pdplmain\dbpd0ctl" does not exist. <#1>
PHASE 2007-08-02 18:57:16
SAP Web Application Server
PHASE 2007-08-02 18:57:16
Request common parameters of SAP System
PHASE 2007-08-02 18:57:17
Collecting information on database configuration
PHASE 2007-08-02 18:57:17
Create operating system accounts
INFO 2007-08-02 18:57:17
Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
INFO 2007-08-02 18:57:17
Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
INFO 2007-08-02 18:57:18
Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
INFO 2007-08-02 18:57:18
Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
PHASE 2007-08-02 18:57:33
Preparing OS account for MCOD installation
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:36
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
PHASE 2007-08-02 18:57:38
Preparing DBMS-specific environment variables
WARNING 2007-08-02 18:57:38
Error 1332 (No mapping between account names and security IDs was done.
) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
INFO 2007-08-02 18:57:38
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:39
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:41
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:42
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:44
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:45
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:46
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:47
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:48
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:49
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:50
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:52
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:54
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:55
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2007-08-02 18:57:55
Adapt filesystem
PHASE 2007-08-02 18:57:55
Prepare check/adapt SAP instance filesystem
INFO 2007-08-02 18:57:55
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/prfclog exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2007-08-02 18:57:56
Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
INFO 2007-08-02 18:57:56
Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
INFO 2007-08-02 18:57:56
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:57
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
PHASE 2007-08-02 18:57:59
Extract archives
INFO 2007-08-02 18:58:00
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2007-08-02 18:58:01
Extract SAP System kernel archives
INFO 2007-08-02 18:58:01
Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
ERROR 2007-08-02 18:58:01
MOS-01021 PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
ERROR 2007-08-02 18:58:01
FJS-00012 Error when executing script.
Waiting to hear from at the earliest
Regards
Hari haran.v -
I've installed SAP in my PC with windows 2000 server family....... .......
I've installed SAP in my PC with windows 2000 server family... I want to upgrade my OS to XP. Can it be possible without unmounting SAP??? Please help me.
Hi Pratap,
SAP doesn't work with XP, it works only server Operating System.
But u can instal XP in the system without currupting the SAP.
Make sure that your HDD having atleast 3 partitions.
The first two partintions (Ex.C:/& D:/) may have 2000 Server and SAP respectively.
In the 3rd Partition (Ex.E:/) u can instal XP. but better to not touch 1st two Partitions
To Instal XP follow these steps.
Insert XP OS CD
Restat the System
follow installation procedure according CD
Finally select E:/ to install XP.
Pls let me know your feedback
Regards
Raveendra -
Hi colleagues:
I am trying to install an ERP 6.0 on a windows server 2003 and SQL Sever. The problem I have is that on phase 20 of 24 (Starting) the systems prompts me an error. It seems that it cannot start. Ihave tried to restart again but the problem still exits.
I have another instance in the system but it does not seem a problem of memory. Iu00B4ve checked the logs of the different processes and I think that is a problem of the database, the processes cannot connect to it, and therefore makes a problem of login.
The content of the log is:
B Mon Jun 16 09:41:15 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno 00
M sid DES
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 1868
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 9 1868) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Mon Jun 16 09:41:16 2008
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3994272 (19872)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1440)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 07FE0040, size: 4653368)
M DpShMCreate: allocated sys_adm at 07FE0040
M DpShMCreate: allocated wp_adm at 07FE1E40
M DpShMCreate: allocated tm_adm_list at 07FE65C0
M DpShMCreate: allocated tm_adm at 07FE65F0
M DpShMCreate: allocated wp_ca_adm at 083B5890
M DpShMCreate: allocated appc_ca_adm at 083BB650
M DpShMCreate: allocated comm_adm at 083BD590
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0843E450
M DpShMCreate: allocated gw_adm at 0843E490
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0843E4C0
M DpShMCreate: allocated wall_adm at 0843E4C8
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 9 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host sap470
M
M Mon Jun 16 09:41:17 2008
M calling db_connect ...
C Thread ID:380
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\DES\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 72
C patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SAP470
C CopyLocalParameters: dbuser is 'des'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C
C Mon Jun 16 09:41:18 2008
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23391. hr: 0x8000ffff Login failed for user 'SAP470\SAPServiceDES'.
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 18456, sev 0), Login failed for user 'SAP470\SAPServiceDES'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23391]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 9
M
M stat = 4
M reqtype = 4
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap470_DES_00 on host sap470 (wp 9)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Jun 16 09:41:18 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 9 1868) [dpnttool.c 327]
Thank u a lot.Hi anil:
Yes, I have them already installed, and I also have another system running in the machine, so i do not think that this is the problem.
Do you have any other idea??
Thanks a lot. -
Error while installing NW 7.4 SR2 in High availability
Hello Guys,
We are installing NW 7.4 SR2 Enterprise Portal with sybase database on windows 2012 R2 server under high availability i.e Microsoft Cluster.
JEP is the system ID of the server, SAPJEP is the virtual host and X.X.X.36 is the virtual I.P for Central Instance node.
Physical I.P of First node is X.X.X.21
We have started the installation as first cluster node and get stuck at phase 3.
The error in sapinst.log is below:-
FCO-00011 The step assignNetworknameToClusterGroup with step key
|NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup
was executed with status ERROR ( Last error reported by the step: Could
not set properties on ClusterResource 'SAP JEP IP'.).
The error log of sapinst_dev.log is is below:-
TRACE 2015-03-18 11:30:29.193
NWInstance.getStartProfilePath(true)
TRACE 2015-03-18 11:30:29.194
NWInstance.getStartProfileName()
TRACE 2015-03-18 11:30:29.194
NWInstance.getStartProfileName() done: JEP_ERS10_SAPJEP
TRACE 2015-03-18 11:30:29.194
NWERSInstance.getDirProfile()
TRACE 2015-03-18 11:30:29.194
NW.getDirProfile(false)
TRACE 2015-03-18 11:30:29.195
NW.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE 2015-03-18 11:30:29.204 [synxcpath.cpp:925]
CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Path \\SAPJEP/sapmnt/JEP/SYS/profile is on a non-existing share.
TRACE 2015-03-18 11:30:29.204
NWERSInstance.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE 2015-03-18 11:30:29.205
NWInstance.getStartProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE 2015-03-18 11:30:29.206
NWInstance.getProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE 2015-03-18 11:30:29.206
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE 2015-03-18 11:30:29.207
NW.getPersistentDefaultProfile()
TRACE 2015-03-18 11:30:29.207
NW.isUnicode(true)
TRACE 2015-03-18 11:30:29.208
NW.isUnicode() done: true
TRACE 2015-03-18 11:30:29.208
NW.getPersistentDefaultProfile() done
TRACE 2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE 2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP)._getPersistentProfile(INSTANCE) done
TRACE 2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentProfile() done
TRACE 2015-03-18 11:30:29.209
PersistentR3Profile.commit()
TRACE 2015-03-18 11:30:29.209
PersistentR3Profile.commit() done
TRACE 2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE 2015-03-18 11:30:29.210
NW.getPersistentDefaultProfile()
TRACE 2015-03-18 11:30:29.210
NW.isUnicode(true)
TRACE 2015-03-18 11:30:29.211
NW.isUnicode() done: true
TRACE 2015-03-18 11:30:29.211
NW.getPersistentDefaultProfile() done
TRACE 2015-03-18 11:30:29.211
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE 2015-03-18 11:30:29.211
PersistentR3Profile.commit()
TRACE 2015-03-18 11:30:29.211
PersistentR3Profile.commit() done
TRACE 2015-03-18 11:30:29.212
NWProfiles(JEP.ERS10.SAPJEP).commit() done
TRACE 2015-03-18 11:30:29.212
NWInstanceInstall.addSAPCryptoParametersToProfile() done
TRACE 2015-03-18 11:30:29.260
The step setProfilesForSAPCrypto with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|NW_SAPCrypto|ind|ind|ind|ind|crypto|0 has been executed successfully.
INFO 2015-03-18 11:30:29.262 [synxccuren.cpp:887]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE 2015-03-18 11:30:29.265 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:29.267 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:29.270 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:29.280 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:29.281 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:29.284 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:29.293 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:29.295 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:29.315 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2015-03-18 11:30:29.330 [csistepexecute.cpp:1024]
Execute step askUnpack of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0
TRACE 2015-03-18 11:30:29.339 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|askUnpack returns TRUE
TRACE 2015-03-18 11:30:29.364
Call block: NW_Unpack2_ind_ind_ind_ind
function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpack
is validator: false
TRACE 2015-03-18 11:30:29.364
NWInstall.getSystem(JEP)
TRACE 2015-03-18 11:30:29.366
NWOption(localExeDir).value()
TRACE 2015-03-18 11:30:29.366
NWOption(localExeDir).value() done: true
TRACE 2015-03-18 11:30:29.367
NWOption(collected).value()
TRACE 2015-03-18 11:30:29.367
NWOption(collected).value() done: true
TRACE 2015-03-18 11:30:29.369
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:29.370
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:29.371
NW() done
TRACE 2015-03-18 11:30:29.371
NWInstall() done
TRACE 2015-03-18 11:30:29.371
NWInstall.getSystem() done
TRACE 2015-03-18 11:30:29.372
NWInstall.mapUnpackTable(t_askUnpack)
TRACE 2015-03-18 11:30:29.373
NWInstall.mapUnpackTable() done: true
TRACE 2015-03-18 11:30:29.377
NWDB._get(JEP, ind)
TRACE 2015-03-18 11:30:29.377
NWDB._fromTable(JEP, ctor)
TRACE 2015-03-18 11:30:29.379
NWDB(JEP, {
sid:JEP
hostname:undefined
dbsid:undefined
installDB:false
ORACLE_HOME:
abapSchema:
abapSchemaUpdate:
javaSchema:
TRACE 2015-03-18 11:30:29.379
NWDB() done
TRACE 2015-03-18 11:30:29.379
NWDB._fromTable() done
TRACE 2015-03-18 11:30:29.380
NWDB._get() done
TRACE 2015-03-18 11:30:29.380
NWDB.getDBType(): ind
TRACE 2015-03-18 11:30:29.390 [iaxxgenimp.cpp:283]
CGuiEngineImp::showDialogCalledByJs()
showing dlg d_nw_ask_unpack
TRACE 2015-03-18 11:30:29.390 [iaxxgenimp.cpp:293]
CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<title>Unpack Archives</title>
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value></value>
</row>
</table>
<dialog/>
TRACE 2015-03-18 11:30:29.391 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2015-03-18 11:30:30.617 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2015-03-18 11:30:30.618 [iaxxcdialogdoc.cpp:190]
CDialogDocument::submit()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE 2015-03-18 11:30:30.646
Call block: NW_Unpack2_ind_ind_ind_ind
function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpackValidator_default
is validator: true
TRACE 2015-03-18 11:30:30.646
NWInstall.getSystem(JEP)
TRACE 2015-03-18 11:30:30.648
NWOption(localExeDir).value()
TRACE 2015-03-18 11:30:30.648
NWOption(localExeDir).value() done: true
TRACE 2015-03-18 11:30:30.649
NWOption(collected).value()
TRACE 2015-03-18 11:30:30.649
NWOption(collected).value() done: true
TRACE 2015-03-18 11:30:30.652
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:30.653
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:30.654
NW() done
TRACE 2015-03-18 11:30:30.654
NWInstall() done
TRACE 2015-03-18 11:30:30.654
NWInstall.getSystem() done
TRACE 2015-03-18 11:30:30.655
NWInstall.validateUnpackTable(t_askUnpack)
TRACE 2015-03-18 11:30:30.657
NWInstall.validateUnpackTable(): validating row {
codepage:Unicode
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
ownPath:
path:DBINDEP\SAPEXE.SAR
sid:JEP
unpack:true
TRACE 2015-03-18 11:30:30.659 [tablecpp.cpp:136]
Table(t_NW_unpack).updateRow({
cd:UKERNEL
codepage:Unicode
confirmUnpack:
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
list:
needUnpacking:true
ownPath:
path:DBINDEP\SAPEXE.SAR
selectiveExtract:false
sid:JEP
unpack:true
wasUnpacked:false
}, WHERE sid='JEP' AND path='DBINDEP\SAPEXE.SAR' AND codepage='Unicode' AND destination='E:\usr\sap\JEP\SYS\exe\uc\NTAMD64')
updating
TRACE 2015-03-18 11:30:30.661
NWInstall.validateUnpackTable() done
TRACE 2015-03-18 11:30:30.722 [iaxxgenimp.cpp:301]
CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE 2015-03-18 11:30:30.724 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:30.725 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:30.728 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:30.776
The step askUnpack with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0 has been executed successfully.
INFO 2015-03-18 11:30:30.778 [synxccuren.cpp:887]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE 2015-03-18 11:30:30.780 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:30.781 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:30.785 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:30.802 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:30.803 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:30.806 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:30.819 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:30.842 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE 2015-03-18 11:30:30.908 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:30.909 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:30.963 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE 2015-03-18 11:30:31.139 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2015-03-18 11:30:31.142 [csistepexecute.cpp:1024]
Execute step setDisplayNames of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0
TRACE 2015-03-18 11:30:31.177
Call block: NW_FirstClusterNode_ind_ind_ind_ind
function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames_Preprocess
is validator: false
TRACE 2015-03-18 11:30:31.219 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|setDisplayNames returns TRUE
TRACE 2015-03-18 11:30:31.243
Call block: NW_FirstClusterNode_ind_ind_ind_ind
function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames
is validator: false
TRACE 2015-03-18 11:30:31.246
NWInstance.byNumberAndRealHost(00, DCEPPRDCI)
TRACE 2015-03-18 11:30:31.246
NWInstance.find()
TRACE 2015-03-18 11:30:31.248
NWOption(localExeDir).value()
TRACE 2015-03-18 11:30:31.248
NWOption(localExeDir).value() done: true
TRACE 2015-03-18 11:30:31.249
NWOption(collected).value()
TRACE 2015-03-18 11:30:31.249
NWOption(collected).value() done: true
TRACE 2015-03-18 11:30:31.252
NWInstance._fromRow({
sid:JEP
name:SCS00
number:00
host:SAPJEP
guid:0
realhost:dcepprdci
type:SCS
installationStatus:installing
startProfileName:JEP_SCS00_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE 2015-03-18 11:30:31.252
NWSCSInstance()
TRACE 2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP)
TRACE 2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP) done
TRACE 2015-03-18 11:30:31.253
NWInstanceInstall()
TRACE 2015-03-18 11:30:31.253
NWInstanceInstall() done
TRACE 2015-03-18 11:30:31.253
NWInstall.getSystem(JEP)
TRACE 2015-03-18 11:30:31.253
NWOption(localExeDir).value()
TRACE 2015-03-18 11:30:31.254
NWOption(localExeDir).value() done: true
TRACE 2015-03-18 11:30:31.254
NWOption(collected).value()
TRACE 2015-03-18 11:30:31.254
NWOption(collected).value() done: true
TRACE 2015-03-18 11:30:31.256
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:31.257
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE 2015-03-18 11:30:31.258
NW() done
TRACE 2015-03-18 11:30:31.258
NWInstall() done
TRACE 2015-03-18 11:30:31.258
NWInstall.getSystem() done
TRACE 2015-03-18 11:30:31.258
NWSCSInstance() done
TRACE 2015-03-18 11:30:31.259
NWInstance._fromRow() done
TRACE 2015-03-18 11:30:31.259
NWInstance._fromRow({
sid:JEP
name:ERS10
number:10
host:SAPJEP
guid:1
realhost:dcepprdci
type:ERS
installationStatus:installing
startProfileName:JEP_ERS10_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE 2015-03-18 11:30:31.259
NWERSInstance()
TRACE 2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP)
TRACE 2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP) done
TRACE 2015-03-18 11:30:31.260
NWInstanceInstall()
TRACE 2015-03-18 11:30:31.260
NWInstanceInstall() done
TRACE 2015-03-18 11:30:31.261
NWERSInstance() done
TRACE 2015-03-18 11:30:31.261
NWInstance._fromRow() done
TRACE 2015-03-18 11:30:31.261
NWInstance.find() done: 1 instances found
TRACE 2015-03-18 11:30:31.261
t_scs.setDisplayName([nw.progress.installInstance, SCS00], WHERE ROWNUM=0)
TRACE 2015-03-18 11:30:31.305
The step setDisplayNames with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0 has been executed successfully.
INFO 2015-03-18 11:30:31.307 [synxccuren.cpp:887]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE 2015-03-18 11:30:31.362
Build Client for subcomponent |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_FinishFirstClusterNode|ind|ind|ind|ind|finishFirst|0
TRACE 2015-03-18 11:30:31.364
TRACE 2015-03-18 11:30:31.364 [ccdclient.cpp:22]
CCdClient::CCdClient()
TRACE 2015-03-18 11:30:31.385 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:31.387 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE 2015-03-18 11:30:31.390 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:31.406 [cpropertycontentmanager.hpp:220]
CPropertyContentManager::logMissingParameters()
The following parameters can be set via SAPINST_PARAMETER_CONTAINER_URL (inifile.xml) but not via SAPINST_INPUT_PARAMETERS_URL:
Component 'NW_ERS_Instance': ersInstanceNumber, restartSCS
Component 'NW_GetDomainOU': isOUInstallation, ou_delimiter, windows_domain_ous
Component 'NW_GetSidFromCluster': clusterGroup, isUnicode, localDrive, network, networkName, sharedDrive, sid, useDHCP
Component 'NW_GetUserParameterWindows': sapDomain, sapServiceSIDPassword, sidAdmPassword
Component 'NW_SAPCrypto': installSAPCrypto
Component 'NW_SCS_Instance': instanceNumber, scsMSPort, scsMSPortInternal
Component 'Preinstall': installationMode
INFO 2015-03-18 11:30:31.802 [synxcpath.cpp:799]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\summary.html.
TRACE 2015-03-18 11:30:31.828 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:31.852 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE 2015-03-18 11:30:31.916 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:31.917 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:31.971 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE 2015-03-18 11:30:32.152 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:32.154 [sixxbsummary.cpp:320]
CSiSummaryContainer::showDialog()
<?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog version="1.0" sid="diReviewDialog"> <title>Parameter Summary</title><description>Choose 'Next' to start with the values shown. Otherwise, select the parameters to be changed and choose 'Revise'. You are then taken to the screen where you can change the parameter. You might be guided through other screens that have so far been processed.</description> <review id="review_controll"><caption><![CDATA[Parameter list]]></caption><inputgroup id="ID_1"> <caption><![CDATA[Drive for Local Instances]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_2"><pulldown edit="false" enabled="true" highlight="false" sid="localDrive">
<caption>Destination Drive for Local Instances</caption>
<helpitem id="mscs.SelectLocalDrive"/>
<value>C:</value>
<value>D:</value>
<selectvalue>D:</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_3"> <caption><![CDATA[SAP System Cluster Parameters]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_4"><field enabled="true" highlight="false" sid="sid">
<caption>SAP System ID (SAPSID)</caption>
<helpitem id="common.SAPSystemIDCIDB"/>
<value type="upper" maxlength="3" regexp="^[A-Z][A-Z0-9]{2}" minlength="3">JEP</value>
</field></input><input id="ID_5"><field enabled="true" highlight="false" sid="networkName">
<caption>Network Name (SAP Virtual Instance Host)</caption>
<helpitem id="common.VirtualInstanceHostWindowsMSCS"/>
<value type="string" maxlength="13" minlength="1">SAPJEP</value>
</field></input><input id="ID_6"><pulldown edit="false" enabled="true" highlight="false" sid="network">
<caption>Use Public Network</caption>
<helpitem id="mscs.UsePublicNetwork"/>
<value>Cluster Network 1</value>
<selectvalue>Cluster Network 1</selectvalue>
</pulldown></input><input id="ID_7"><pulldown edit="false" enabled="true" highlight="false" sid="sharedDrive">
<caption>Destination Drive for Clustered Instances</caption>
<helpitem id="mscs.SelectSharedDrive"/>
<value>BACKUP</value>
<value>SAP_USR_SID_CI_NODE</value>
<value>SAPDATA1</value>
<value>SAPDATA2</value>
<value>SAPDATA3</value>
<value>SAPDATA4</value>
<value>SAPLOG1</value>
<value>SAPLOG2</value>
<value>SAPTEMP_SAPDIAG_SAPSYBSYSTEM</value>
<value>SYBASE</value>
<selectvalue>SAP_USR_SID_CI_NODE</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_8"> <caption><![CDATA[DNS Domain Name]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_9"><check enabled="true" highlight="false" sid="setFQDN">
<caption>Set FQDN for SAP system</caption>
<helpitem id="common.FullyQualifiedDomainNameSelect"/>
<boolvalue>
<true/>
</boolvalue>
</check></input><input id="ID_10"><field enabled="true" highlight="false" sid="FQDN" depends="setFQDN">
<caption>DNS Domain Name for SAP System</caption>
<helpitem id="common.FullyQualifiedDomainName"/>
<value type="string" regexp="^[^.]+.*$" minlength="1">jnport.com</value>
</field></input></inputgroup><inputgroup id="ID_11"> <caption><![CDATA[Windows Domain]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_12"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_13"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_14"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input><input id="ID_15"><password confirm="true" enabled="true" highlight="false" sid="sapServiceSIDPassword">
<caption>Password of SAP System Service User</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_16"> <caption><![CDATA[Windows Domain for SAP Host Agent]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_17"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="local">
<caption>Local Domain</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_18"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_19"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_20"> <caption><![CDATA[SCS Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_21"><field enabled="true" highlight="false" sid="instanceNumber">
<caption>SCS Instance Number</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="string" maxlength="2" regexp="[0-9]{2}" minlength="2">00</value>
</field></input></inputgroup><inputgroup id="ID_22"> <caption><![CDATA[Java Message Server Port]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_23"><field enabled="true" highlight="false" sid="scsMSPortInternal">
<caption>Internal Java Message Server Port</caption>
<helpitem id="common.InternalMessagePort"/>
<value type="numeric" maxlength="5" min="1025" max="65535">3900</value>
</field></input></inputgroup><inputgroup id="ID_24"> <caption><![CDATA[Enqueue Replication Server Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_25"><field enabled="true" highlight="false" sid="ersInstanceNumber">
<caption>Number of the ERS Instance</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="numeric" maxlength="2" max="99" minlength="2">10</value>
</field></input><input id="ID_26"><field enabled="true" highlight="false" sid="ersVirtualHostname">
<caption>ERS Instance - Virtual Host Name</caption>
<helpitem id="common.virtualHostname"/>
<value type="string" maxlength="60" minlength="1">SAPJEP</value>
</field></input></inputgroup><inputgroup id="ID_27"> <caption><![CDATA[Unpack Archives]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_28"><table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table></input></inputgroup></review><button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" default="true"><caption>&Next</caption><action>ACTION_NEXT</action><tooltiphelp><![CDATA[Continue processing]]></tooltiphelp></button><button sid="btEDIT"><caption>&Revise</caption><action>ACTION_EDIT</action><tooltiphelp><![CDATA[Edit input values]]></tooltiphelp></button><button sid="btDETAIL" default="true"><caption>Show &Detail</caption><action>ACTION_CBD_DETAIL</action><tooltiphelp><![CDATA[Show all input values]]></tooltiphelp></button></dialog></sapinstgui>
TRACE 2015-03-18 11:30:32.161 [iaxxgenimp.cpp:1031]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2015-03-18 11:30:33.330 [sixxbsummary.cpp:83]
CSiSummaryContainer::setDocument(const iXMLDocument & doc)
<?xml version="1.0" encoding="utf-8"?>
<sapinstguiresp>
<action>ACTION_NEXT</action>
<dialog sid="diReviewDialog">
<review id="review_controll"/>
</dialog>
</sapinstguiresp>
TRACE 2015-03-18 11:30:33.331 [iaxxdlghnd.cpp:96]
CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2015-03-18 11:30:33.331 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:33.356 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE 2015-03-18 11:30:33.375 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:33.375 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:33.429 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE 2015-03-18 11:30:33.500 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:33.773
Status of Step |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 is not OK. So we have to restart at this point.
TRACE 2015-03-18 11:30:33.773
Switch to STANDARD mode
TRACE 2015-03-18 11:30:33.773 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:33.801 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE 2015-03-18 11:30:33.866 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:33.868 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:33.926 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE 2015-03-18 11:30:34.67 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2015-03-18 11:30:34.67 [csistepexecute.cpp:1024]
Execute step ntpatch2 of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0
TRACE 2015-03-18 11:30:34.084
Call block: NW_Update_DLLs_ind_ind_ind_ind
function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2_Preprocess
is validator: false
TRACE 2015-03-18 11:30:34.115 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 returns TRUE
TRACE 2015-03-18 11:30:34.127
Call block: NW_Update_DLLs_ind_ind_ind_ind
function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2
is validator: false
TRACE 2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs(false)
TRACE 2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs() already run
TRACE 2015-03-18 11:30:34.153
The step ntpatch2 with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0 has been executed successfully.
INFO 2015-03-18 11:30:34.154 [synxccuren.cpp:887]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE 2015-03-18 11:30:34.187 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:34.200 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE 2015-03-18 11:30:34.255 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE 2015-03-18 11:30:34.256 [kdxxctaco.cpp:93]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE 2015-03-18 11:30:34.283 [kdxxctaco.cpp:121]
CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE 2015-03-18 11:30:34.425 [kdxxctaco.cpp:155]
CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO 2015-03-18 11:30:34.426 [csistepexecute.cpp:1024]
Execute sHello Arjun,
Have you executed any other installation prior this attempt?
It seems there are unfinished installations on this server. If this is the case, run the SWPM to uninstall the unfinished installation. Then, execute the installation once again.
Also, make sure all IPs are corrects in the DND and host files. There were cases in which the IPs were not properly configured, or maybe a typo.
Regards,
Henrique Girardi
SAP Active Global Support
#2081285 - How to enter good search terms to an SAP search?
https://service.sap.com/sap/support/notes/2081285
SWPM Troubleshooting documents:
http://scn.sap.com/docs/DOC-62646 -
SAP Web Dispatcher in a high availability environment
Hello, guys
We are working in a CRM 7.0 implementation Project. Our system landscape is the following:
- Two hosts (host1 & host2) on MSCS cluster (Windows 2008) with SQL Server and ASCS in high availability. Additional, this MSCS cluster has a instance of SAP Web Dispatcher.
- In these two host weu2019ve installed a CI & DI instance, outside of high availability scope
- Two additional hosts (host3 & host4) with one dialog instance in every host
We have severe problems with communication between SAP Web Dispatcher and ICM components. Our configuration schema is the next:
- ASCS (MSCS_virtual_hostname):
ms/server_port_0 = PROT=HTTP,PORT=8141
SAPLOCALHOSTFULL = <MSCS_virtual_hostname>.<domain>
- IC (host1)
icm/server_port_0 = PROT=HTTP,PORT=8040,TIMEOUT=90,PROCTIMEOUT=600
icm/host_name_full = <host1>.<domain>
- ID1 (host2)
icm/server_port_0 = PROT=HTTP,PORT=8044,TIMEOUT=90,PROCTIMEOUT=600
icm/host_name_full = <host2>.<domain>
- ID3 (host3)
icm/server_port_0 = PROT=HTTP,PORT=8045,TIMEOUT=90,PROCTIMEOUT=600
icm/host_name_full = <host3>.<domain>
- ID4 (host4)
icm/server_port_0 = PROT=HTTP,PORT=8046,TIMEOUT=90,PROCTIMEOUT=600
icm/host_name_full = <host4>.<domain>
- SAP Web Dispatcheer (MSCS_virtual_hostname):
SAPGLOBALHOST = <MSCS_virtual_hostname>
SAPLOCALHOSTFULL = <MSCS_virtual_hostname>.<domain>
SAPLOCALHOST = <MSCS_virtual_hostname>
SAPLOCALHOST = <MSCS_virtual_hostname>
ms/http_port = 8141
icm/server_port_0 = PROT=HTTP, PORT=8042,TIMEOUT=30,PROCTIMEOUT=600
wdisp/add_xforwardedfor_header = TRUE
In SAP Web Dispatcher log weu2019ve found the following error messages:
Fri Jan 28 15:45:22 2011
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused)
*** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 130060
(SI_ECONN_REFUSE/10061; I4; ST; 192.168.6.182:8044)
*** ERROR => Connection request to host: , service: 8044 failed (NIECONN_REFUSED)
SAP Web Dispather is trying to connect to connect with dialog instances through , which itu2019s incorrect (ports 8044, 8045 & 8046 are opened in dialog instances, not in virtual instance). I think it should try with real hostnames (host1, host2, host3 & host4).
¡¡Please, help!! Thanks in advanceHello, Karthi,
Our Web Dispatcher profile looks as following:
Instance specific parameters
Maybe some of these parameters are needless
SAPSYSTEMNAME = <CRM SID>
INSTANCE_NAME = <WD SID>
SAPSYSTEM = <WD System number>
SAPGLOBALHOST = <virtual hostname of WD>
SAPLOCALHOSTFULL = <FQDN of virtual hostname of WD>
SAPLOCALHOST = <virtual hostname of WD>
Directorios
DIR_INSTANCE = R:\usr\sap\wd
DIR_INSTALL = R:\usr\sap\wd
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = R:\usr\sap\wd
DIR_PROFILE = R:\usr\sap\wd
DIR_HOME = R:\usr\sap\wd
DIR_ICMAN_ROOT = $(DIR_INSTANCE)\icmanroot
R:\usr\sap\wd\global\security\data
Accesibilidad al Message Server
rdisp/mshost = <virtual hostname of CRM Message Server>
ms/http_port = <HTTP port of CRM Message Server>
HTTP Settings
Puerto estandar de acceso HTTP
icm/server_port_0 = PROT=HTTP, PORT=8042,TIMEOUT=30,PROCTIMEOUT=600
These parameters defines load balancing weights
#wdisp/server_00 = NAME=<hostname_SID_SYSNR>, LB=4, ACTIVE=0
#wdisp/server_01 = NAME=<hostname_SID_SYSNR>, LB=10, ACTIVE=1
#wdisp/server_02 = NAME=<hostname_SID_SYSNR>, LB=20, ACTIVE=1
#wdisp/server_03 = NAME=<hostname_SID_SYSNR>, LB=20, ACTIVE=1
Puerto de acceso interfaz web de administrador
icm/HTTP/admin_0 = PREFIX=/sap/admin, DOCROOT=$(DIR_ICMAN_ROOT)/admin, AUTHFILE=$(DIR_INSTANCE)\sec\icmauth.txt
Activaciu00F3n de la cachu00E9 de SAP Web Dispatcher
icm/HTTP/server_cache_0/http_cache_control = true
icm/HTTP/server_cache_0 = PREFIX=/, CACHEDIR=$(DIR_INSTANCE)\cache
Fichero de log de seguridad
icm/security_log = LOGFILE=$(DIR_HOME)\log\security_%y%m%d.log, SWITCHTF=day, MAXSIZEKB=1024, FILEWRAP=off
icm/HTTP/logging_0 = PREFIX=/, LOGFILE=$(DIR_HOME)\log\wd_log_%y%m%d.log, SWITCHTF=day, MAXSIZEKB=1024, FILEWRAP=off
icm/log_level = 1
Dispatcher Configuration
wdisp/add_xforwardedfor_header = FALSE
Parametrizacion de memoria
Datos de sizing de los que se parten #
#users = 1800 usuarios (900 concurrentes)
#req_per_dialog_step = 6 peticiones HTTP por paso
#thinktime_per_diastep_sec = 10 seg. de "thinktime"
#conn_keepalive_sec = 30 seg. mantener conexiu00F3n abierta con ICM
#icm/max_conn = users * req_per_dialog_step * conn_keepalive_sec / thinktime_per_diastep_sec
icm/max_conn = 16200
wdisp/HTTP/max_pooled_con = icm/max_conn
wdisp/HTTP/max_pooled_con = 16200
icm/max_sockets = al menos la suma de icm/max_conn y wdisp/HTTP/max_pooled_con
icm/max_sockets = 32400
mpi/buffer_size = 64K = 64 * 1024 = 65536
mpi/buffer_size = 65536
mpi/total_size_MB = icm/max_conn * mpi/buffer_size (hay que convertir mpi/buffer_size a MB)
mpi/total_size_MB = 1024
icm/req_queue_len = icm/max_conn / 2
icm/req_queue_len = 8100
icm/min_threads = icm/max_conn / ~50
icm/min_threads = 512
icm/max_threads = icm/max_conn / ~20
icm/max_threads = 1024
Parametrizacion de seguridad
Evitar el envu00EDo de mensajes tu00E9cnicos al usuario final
is/HTTP/show_detailed_errors = FALSE
#icm/HTTP/error_templ_path
And ICM parameters are:
- SAPLOCALHOSTFULL= <FQDN of every application server>
- icm/server_port_0 = PROT=HTTP,PORT=8080,TIMEOUT=90,PROCTIMEOUT=600:
- icm/host_name_full = <FQDN of every application server> ## This parameter is ignored if SAPLOCALHOSTFULL is defined
I hope it helps you.
Best regards,
Sergio Su00E1nchez -
ESS XSS delivered with SAP ERP 2004 compatible with SAP 4.7?
Hi,
I was wondering if anyone has sought to implement the latest version of ESS (for SAP ERP 2004) for a SAP 4.7 backend? Is this at all compatible?
I have implemented ESS 50.4 on EP6 SR1 and this works fine with a backend SAP 4.7, but I am interested in knowing whether the newer version of ESS (non-ITS) is compatible with SAP 4.7. I am thinking not, but any experiences of others would be useful.
Regards
John MoyHi John,
If you are concerned about ITS rendition of WEBGui content, then according to OSS Note# <b>197746</b> the WAS6.4 Integratred ITS should do the job.
Yet, till I get my hands wet with custom ESS 50.4 ITS templates upgraded to EP6.4 SP9, then I can assure the results.
Regards,
AAAttar
<b>OSS Note# 197746...</b>
"As of release 6.40 of SAP Web Application Server the SAP Web AS Kernel includes a subcomponent called "SAP Integrated ITS". This component is the successor of the "standalone" ITS releases up to and including release 6.20. Since this component is integrated into SAP Web AS the rules that apply to the Kernel also apply to the SAP Integrated ITS.
Information on patches and maintenance periods for SAP Web AS Kernel can be found in OSS notes 19466 and 138704.
The Integrated ITS can only be used to run SAP GUI for HTML and IACs of the SAP System it is part of. Therefore there are no longer questions in regards to downward or upward compatability. Since the Integrated ITS consists of executables being part of the Kernel and templates, MIMES, etc. being part of SAP_BASIS you can only use the Integrated ITS if you have both SAP Web AS Kernel 6.40 and SAP_BASIS 6.40 or higher installed." -
Install SAP ERP 6.0 EHP4 Appl Srv FJS-00003 and FCO-00011 Error
Hello to all
i will Install an Linux Appl Srv (SLES 10 SP3) for our Windows 2003 x64/Oracle 10.2.0.4 SAP ERP 6.0 EHP4 Central Instance but i get the following errors
ERROR 2010-10-28 11:35:47.149 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
ERROR 2010-10-28 11:35:48.796 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
i have found some Instruction to set JAVA_HOME, SAPINST_JRE_HOME .. but his not helps.
Here the System Settings
SUSE SLES 10 SP3
InstMst_7.01_SR1__NW_ERP_CRM_SRM_SCM
NW_7.01_SR1_Kernel_Linux__OS_400
ORACLE 10.2 64-BIT / ORACLE 10.2 32-Bit / Client / Number 51033272
sap-locale-1.0-25.7.1.x86_64.rpm
sapinit-3.0-1.13.1.x86_64.rpm
saplocales-2.4-4.x86_64.rpm
sapinst stared as root
profile and global directory from windows mounted to /sapmnt/E12/
cat /etc/profile.d/alljava.sh
export JAVA_HOME=/opt/j2sdk1.4.2_19
export JDK_HOME=/opt/j2sdk1.4.2_19
export SDK_HOME=/opt/j2sdk1.4.2_19
export JRE_HOME=/opt/j2sdk1.4.2_19
export SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
export JAVA_BINDIR=$JAVA_HOME/bin
export PATH=$PATH:$JAVA_HOME/bin
cat /etc/profile.d/alljava.csh
setenv JAVA_HOME /opt/j2sdk1.4.2_19
setenv JDK_HOME /opt/j2sdk1.4.2_19
setenv SDK_HOME /opt/j2sdk1.4.2_19
setenv JRE_HOME /opt/j2sdk1.4.2_19
setenv SAPINST_JRE_HOME /opt/j2sdk1.4.2_19
setenv JAVA_BINDIR $/bin
setenv PATH $:$/bin
export tels me
declare -x JAVA_BINDIR="/opt/j2sdk1.4.2_19/bin"
declare -x JAVA_HOME="/opt/j2sdk1.4.2_19"
declare -x JDK_HOME="/opt/j2sdk1.4.2_19"
declare -x JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x PATH="/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin"
declare -x SAPINST_JRE_HOME="/opt/j2sdk1.4.2_19"
declare -x SDK_HOME="/opt/j2sdk1.4.2_19"
setenv tels me
JRE_HOME=/opt/j2sdk1.4.2_19
SAPINST_JRE_HOME=/opt/j2sdk1.4.2_19
JAVA_BINDIR=/opt/j2sdk1.4.2_19/bin
PATH=/sbin:/usr/sbin:/usr/local/sbin:/opt/gnome/sbin:/root/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/usr/bin/X11:/opt/j2sdk1.4.2_19/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin
JAVA_HOME=/opt/j2sdk1.4.2_19
SDK_HOME=/opt/j2sdk1.4.2_19
java -version
java version "1.4.2_19"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_19-b04)
Java HotSpot(TM) Client VM (build 1.4.2_19-b04, mixed mode)
i hope somebody can help me
best regards
Oliver
Edited by: Oliver Fischer on Oct 28, 2010 12:09 PMHello Markus
here the last lines
ERROR 2010-10-28 14:27:11.986 [iaxxejsbas.cpp:204]
FJS-00003 TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)
TRACE 2010-10-28 14:27:12.435 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 12509
TRACE 2010-10-28 14:27:12.584 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 12510
ERROR 2010-10-28 14:27:13.283 [sixxcstepexecute.cpp:950]
FCO-00011 The step setUserEnvironment with step key |NW_DI|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|setUserEnvironment was executed with status ERROR ( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)).
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > Application Server > Oracle > Dialog Instance( Last error reported by the step :TypeError: nw.getJavaHome() has no properties (in script NW_DI|ind|ind|ind|ind, line 52089: ???)). You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERPEhP4/LM/AS/ORA/DI. </p> </body></html>
TRACE 2010-10-28 14:27:13.304 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Oliver -
Problem in Webcenter Portal application with High Availability changes
Jdeveloper Version: 11.1.1.5
JROCKET
MDS is pointing to IBM/DB2 database.
Weblogic Domain 10.3 with 1 cluster - 2 manage servers.
BigIP - Load Balancing
Database: IBM DB2
I am facing below issues in webcenter portal application after making high availability changes.
1. "A connection to the server has failed" Status - 12152
12031
404
2. Because of Inactivity, session is timeout - ADF_FACES_30108 exception.
The above exceptions are occuring randomly in the application. It occurs either at login page or inside the application clicking on any link/button.
I have made high availability changes as per the below blog:
http://rimmidis.blogspot.com/2012/02/adf-application-running-on-clustered.html
Any help is really appreciatedFixed "Because of Inactivity.." popup message by adding more tokens. The PS4 Webcenter portal application default value for CLIENT_STATE_MAX_TOKENS is 3, we increased to 15 that fixed the popup message.
There was another popup message "Connection to the server failed, with status = 404, 12152..., which resulted in a bug in the product. The PortletServletContextListener was throwing classcastexception and that was causing this popup message.
Once again, we have noticed these popup messages only when we tried to make our application high available. -
Install SAP ERP 6.0 - Domain does not exist. Create user failed.
Hi experts,
I have encounter a problem while installing the the SAP ERP 6.0 by IDES Installation Master.
I got no idea about whats wrong here. Please help me out.
Thanks.
Warning: Unable to get the name of the domain.
INFO[E] 2009-08-07 14:28:46.439
FSL-01027 Account user="PHOENIX\SAPServiceEC6" does not exist.
WARNING 2009-08-07 14:28:46.439
Unable to get the name of a domain controller for domain .
WARNING[E] 2009-08-07 14:28:46.455
FSL-01002 Unable to create account PHOENIX\SAPServiceEC6. HRESULT=0x80005009
WARNING[E] 2009-08-07 14:28:46.455
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-08-07 14:28:46.455
FCO-00011 The step createAccounts with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .
Kind Regards,
George.> I choosed typical setting, the system didnt prompt me to choose anything regarding about domain.
Ok - then the system chooses a domain installation - which is the default.
I suggest you stop the installation, run the uninstaller, boot the machine and start over using "Custom" if you want to do a local installation.
Markus
Maybe you are looking for
-
After iOS6 update, iPhone 4 doesn't sync calendar with iTunes
Hello, I have an iPhone 4. After update to iOS6 the sync of my calendar has a strange behavior! It doesn't sync anymore. When I enter a calendar entry on iPhone, it's not synchronized with the macbook Calendar. I changed calendar dates on my macbook
-
Validate account assignment in Sales Order
How do we get the account assignment (cost centre or internal order) validated in the sales order? By 'validated' I mean to have them pass the CO account assignment rules where for us the accounts that are going to be posted to by this type of sales
-
There appears to be a persistent connection limit of 2 for cross domain requests
I am building a service that allows anybody to add real-time push updates to their website or web application. To do this I'm using the Access-Control-Allow-Origin header response from a cloud hosted server. When establishing a connection we create o
-
i am currently writing a program to view cache files generated by internet explorer, however i am having trouble viewing certain types of files such as offline web pages, flash files and so on. i can view online pages (live) and text files etc.. but
-
KITKAT......what a fail of an update.
SInce update to kitkat my phone takes forever to come out of sleep or just hangs there. Slow? the text screen doesn't register typing until you get 6 letters in to your writing. Every aspect of the phone has been slowed by this update. Not to mention