Installing Windows 10 Technical Preview on Probook 4430s

I am interested in installing Windows 10 Technical Preview version on my HP Probook 4430s.  Kindly share your experience or advise precautions to look out for.
Thank you

Hi 
   Firstly you need the ISO file for Windows 10 build 10061   Download link below 
 http://getintopc.com/softwares/operating-systems/w​indows-10-build-10061-iso-3264-bit-free-download/
 Secondly DO NOT overwrite your operating system that you are running now Win 7 - 8 - 8.1 , Purchase a secondary hard drive to test Windows 10 on . Most drivers are covered by Microsoft for Windows 10 so you (may) not have any problems there .  
   Also be sure to download the correct BIT version for your machine whether it be 32bit or 64bit ( Check your already installed windows version for this information in "System" .
                 Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Similar Messages

  • Couldn't install windows technical preview on a usb flash

    Hi, 
    couldn't install windows technical preview on a usb flash setup.
    please say me the solution to this problem

    Hi,
    Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
    If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
    Windows USB/DVD Download Tool
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Problem installing Windows Technical Preview build 9926

    I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
    During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
    This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
    https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

    PH
    Do you know that you can make an ISO to install 10041 and not have to install 9926?
    http://microsoft-news.com/download-windows-10-build-10041-iso-image/
    Wanikiya and Dyami--Team Zigzag

  • "Couldn't Install Windows Technical Preview"

    I'm on the original install and have seen the above message several times, followed by
    "We couldn't update the system reserved partition."
    I dual boot with Windows7 on a seperate hdd. And I use EasyBCD as the switcher at boot-up.
    Any help would be appreciated. Thanks
    Paul

    Why or how did "system reserved partition" get involved ?
    All my dual booting had been done using this method.......
    http://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/
    It works all the time. Want to give it a try ?

  • Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

          
    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?

    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?
    Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
    still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
    I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
    me the advanced repair options.
    The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
    out again. No real diagnostic info presented as to why.

  • Windows To Go Device using Windows Technical Preview

    I have successfully made a Windows To Go Device by the steps in this Technet forum post:
    http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
    Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
    Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
    Flash Drive.
    Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
    Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

    Hi G.One1,
    In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
    I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
    Here is my thought and steps.
    First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
    convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
    In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
    I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
    I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
    Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
    For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
    Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
    Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
    Alex Zhao
    TechNet Community Support

  • Adding features to Windows Technical Preview

    Why serial code not work with Windows Technical Preview evalution copy Build 9879?
    Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

    Hi,
    Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
    If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
    Regards.
    Yolanda Zhu
    TechNet Community Support

  • Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

    As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
    in Update & Recovery Menu (PC Settings)
    Build 10036 announced by rumour mill...
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

    Microsoft Community got there first...
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
    Thanks Andre da Costa
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
    We only reply to questions posted in TechNet forums.
    We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
    There is no such thing as who gets "there" first.

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

    Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
    Thanks for the answers
    Vít Repka

    after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
    What do you mean?  You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
    LOL
    No.
    Your expired Win 10 preview will pop up an "expired" notice and become less usable.  Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours.  If you
    want to revert it, it will be up to you to reinstall the old version.  And then can anyone guarantee that it will reactivate properly?
    Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear.  We'd like
    to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that.  It shouldn't be, but it almost certainly will be.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Unable to install Windows 10 Preview in Hyper V in Windows 8.1

    Hi All,
    I have a strange issue in my Hyper V in Windows 8.1 . I download the Windows 10 Technical preview ISO from the Technet Evaluation center and when i try to make a Gen 2 VM and attach the downloaded ISO it gives me the below Error.
    Has any one faced this issue before ? If yes any solutions ?
    Gautam.75801

    Hi,
    I've found this:
    http://www.danielclasson.com/hyper-v-issue-when-starting-virtual-machine-from-downloaded-iso-file/
    basicly saying you should try copy the iso, and mount that copy.
    best regards
    jesper vindum, denmark

  • Cannot install Windows XP on HP Probook 450 G1

    Everytime i try to install windows XP i get a blue screen. Having gone through other forums it seems that  i have to change the Hard disk SATA device mode (AHIC) but cannot change in Bios Advanced. Can anybody help who had the same problem?
    Thanks in advance. 

    Hi:
    Your notebook cannot run XP under any circumstances.
    1. Intel does not support any of its series 8 chipset platforms for Windows XP, so there is no sata ahci driver you can install.
    2. There are no graphics drivers even if you were able to install XP in IDE mode.

  • Problems logging on after installing Windows 10 Preview

    I've been using Windows 7 and Office 2013 for some time and works well with our on premise Lync 2013 installation. over the weekend I upgraded my workstation to Windows 10 and have been reinstalling my apps and making notes of things that will need to be
    looked at and I have a strange issue that Lync will not sign in at all.
    I get the following in the Lync Logs, Windows 10 was a clean install not an upgrade. IP address etc all reconfigured the same and I can access the CSCP through the browser with out any problems.
    Anyone got any ideas?
    1 Login: FAIL (hr = 0x80ee001c)
    Internal Server: Pool1.diti.lr.net:5061
    External Server:
    IsInternalAccessLocation: 1
       autoRetryByErrorCode=1
       withRescheduleHint=0
       withAutoRetrials=0
       Login failed with permanent error or no auto-retrials
    1.1 Lync-autodiscovery: PASS
    1.1.1 Get-NewWebTicket: PASS
    1.1.1.1 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
    CLogonCredentialManager::GetProxyCredentials()Requesting credential user 0x0D099E88 id=15 asking for credentials with ProxyChallengeDetails[authModes=0, firewallName=, realm=]
    1.1.1.2 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
    Executing wws method with windows auth auth, asyncContext=0E9B9F68,
     context: WebRequest context@ :246078848
      MethodType:4
      ExecutionComplete? :0
      Callback@ :1729887C
      AsyncHResult:3d0000
      TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
    1.1.1.3 ExecuteWithWindowsOrNoAuthInternal: PASS
    1.1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
    Executing wws method with windows auth auth, asyncContext=0E9B9F68,
     context: WebRequest context@ :246078848
      MethodType:4
      ExecutionComplete? :1
      Callback@ :1729887C
      AsyncHResult:3d0000
      TargetUri:https://pool1.diti.lr.net/WebTicket/WebTicketService.svc
      OperationName:http://tempuri.org/:IWebTicketService
    1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
    .: Lister :.

    Hi Mike,
    It is not recommend using Lync 2013
     on Windows 10 , there are still many problems need to be solved.
    Also, we do not get any relevant information whether or not the Lync 2013 supports Windows 10.
    And the known issue for your reference.
    •There are several known issues with screen sharing with Lync.
    From
    http://blogs.windows.com/bloggingwindows/2014/11/12/new-build-available-to-the-windows-insider-program/
    Best regards,
    Eric

  • Windows Technical Preview Build 9926 update

    Hi,
    I am trying to update my Windows 10 TP installation and it seems that it fails to download.  I am behind a proxy server in the office with no way around it.  Windows Update fails with error 0x80072ee2.  What I have picked up is that I can
    get the update list if I set a proxy server in BITS using "bitsadmin /util /setieproxy localsystem proxy1:port "bypass list".  However bits fails to download the updates returning either Error or Transient_Error.  Can you please assist
    with this issue?
    Regards,
    Riaan
    EDIT: I set proxy settings of each bits download job to PRECONFIG and the updates downloaded and installed.

    Hi,
    Did you set the proxy server via IE? Do you mean that the Windows Update Client ignore the proxy settings? To make Windows Update use the proxy setting, please execute the following command from cmd
    Netsh winhttp import proxy source=ie
    You can refer to this following KB for "how Windows Update finds proxy settings"
    How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
    http://support.microsoft.com/kb/900935
    Yolanda Zhu
    TechNet Community Support

  • Osx wont boot after installing windows dev preview.

    Hi. I recently added boot camp and windows 8 to my 2011 mbp 17". Ever since the install my computer wont boot osx unless i run disk utility and repair my mac partition. Then everything runs fine untill i go into windows again and then go back to osx.  Thoughts?

    mcwilliamsc wrote:
    Do i need to make a clone or will my time machine backup work.
    TimeMachine drives are not "hold the option key bootable" like a clone and with Lion there is only a "hold Command r"  Recovery Partition on the same drive your trying to repair.
    So to get a external source to boot Lion, you need to Carbon Copy Cloner Lion to a another new/blank Disk Utility HFS+ Journaled formatted drive. Disconnect your TimeMachine drive before doing anything and don't clone to it or everything will be erased, use another drive.
    Once you have Lion cloned, hold option and boot from the Lion clone and test it out.
    mcwilliamsc wrote:
    I only have one external drive andni dont think a clone will fit.
    Only clone to another drive with no data on it, don't clone to a partition, don't clone to a TimeMachine drive. Disconnect all other drives before cloning so you don't make a mistake.
    mcwilliamsc wrote:
    Also when you say c boot do you mean using a lion install disk as opposed to the install option when you boot into disk utility?
    Your signature says you have 10.6.8, obviously there are no install disks for 10.7, however you can make some by "hold option" and clicking on Purchases in the MacAppStore and redownloading the Lion installer (but don't install)
    Follow these directions to make multiple "hold c" bootable DVD copies of the Lion installer.
    http://eggfreckles.net/notes/burning-a-lion-boot-disc/
    Test the disks out, you can see it's just like the 10.6.8 installer disk with Disk Utility and everything.
    With a Lion DVD one can install Lion AND the Lion Recvoery Partition on a new or totally erased drive, like we are about to do.
    When you clone Lion, it only clones the Lion OS X partition, not the Lion Recovery Partition. So by totally erasing the entire disk and installing Lion from the DVD can the Lion Rececovery Partition and Lion OS X partition be restored and your GPT repaired and your firmware flushed.
    So once you got a Lion clone disconnect it, then c boot from the DVD and erase your ENTIRE Lion internal drive, this means you have to select the drive makers name on the left, HFS+ journaled of course.
    Once that is competed, install Lion fresh, this will create both the Lion OX  partition and the Lion Recovery Partition.
    When that is finished, don't bother booting into the fresh Lion install, simply option boot off the Lion clone and reverse clone onto the Lion OS X partition, this will place back Lion, all your programs and files just like before.
    Then you should be back to normal, your GTP is fixed, EFI is fixed (reboot twice) and you have everything except the Windows bootcamp partition.

Maybe you are looking for

  • Perform statement in SAP scripts

    Hi experts, My requirement is that I don't want to display line items for particular customer with a particular item category, For this purpose I was asked to create a Z table with fields customer number(KUNNR) and Item category(PSTYV) and I have to

  • Vendor number range issue in BUCF transaction

    Hi, We are implementing the SRM 5.0 with Extended Classic scenario.  I my current SRM system is already connected with 3 SAP R/3 system and I am implementing and adding 4th SAP R/3 system. I am having an issue to replicating the vendor master from 4t

  • How to install the pseduo device driver?

    I downloaded one package to produce high resolution delay ( similar to sleep() ). Here is the comment text in main file: Written by Jon Zeeff umix!b-tech!zeeff This "device driver" uses the kernel delay() call to allow calls to nap() from user proces

  • Vertical lines, but only upon booting up

    Hi, my problem occurs (for now) only when booting up my mac and only, when it has been turned off for a few hours. When I start up, about one third of my screen (right side) stays black, then has only vertical lines in different colours, then image s

  • How to cancel my backup storage plan?

    How can i cancel my bicloud backup storage plan?