ınstructıons on how to run the updater

I am on a vacatıon ın Turkey and whıle I was really enjoyıng my musıc last nıght ıt suddenly dıed on me. Not cool. I am now try to download the updater from the hotel but I am not sure how to run ıt. any help would be apprecıated. It wıll be awful if ı have not musıc for the remaınder of the trıp. thank you

You need to download iTunes 7, the iPod updater is now integrated into iTunes so you can always get the latest version using the one application. Each of the older standalone updaters only delivers a single old version of the firmware. Have a look at this page for more detail: iPod 101: Installing and Updating Software

Similar Messages

Is there a way to find out if current Add-ons are compatable with the latest upgrade ver. of Firefox before running the update?

I want to know if my current Add-ons and themes are compatable with the latest upgrade version of Firefox before running the update.

Hello azdec.
You can check the add-on's page at [http://addons.mozilla.org addons.mozilla.org] if it's just one or two. I believe there is one extensions in the add-ons gallery that lets you see whether your add-ons are compatible with newer versions of Firefox. But you'll have to search for them, since I don't know how it's called.
I will remind you that if you want an add-on to be compatible with a newer version of Firefox, you need to contact its author.
Also, the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

How to run the cursor

HI
can i knw how to run the cursor from the package. The cursor name is "cursor fet_rec".
procedure update_hdr is
cursor fet_rec is
i rhave the run procdure but i am unable to run the cursor.
procedure update_hdr is
cursor fet_rec is
select status, request_hdr_id
from xxkfupm01.kfupm_mcr_request_header
where status = 'Approved'
for update;
cnt1 NUMBER := 0;
cnt2 NUMBER := 0;
BEGIN
for rec in fet_rec Loop
select count(*)
into cnt1
from XXKFUPM01.kfupm_mcr_request_details
where request_hdr_id = REC.REQUEST_HDR_ID;
select count(*)
into cnt2
from XXKFUPM01.kfupm_mcr_request_details
where request_hdr_id = REC.REQUEST_HDR_ID
and status = 'Complete';
if (cnt1 = cnt2) THEN
update xxkfupm01.kfupm_mcr_request_header
set status = 'Complete'
where current of fet_rec;
END IF;
END LOOP;
Regards
Arif
Edited by: user11309801 on Jan 3, 2011 6:56 AM
Edited by: user11309801 on Jan 3, 2011 7:00 AM

http://tkyte.blogspot.com/2005/06/how-to-ask-questions.html
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage

How to run the life cycle planning in interactive planning

Hi every body,
Can any one explain me how to run the lifecylce planning in interactive plannings ?
i am getting an error messages when i run the lifecycle planning ..'no records from infocube "
I added 9amatnr keyfigure in my pos recently for life cycle planning purpose ..our histarical data was coming from Infocube BW ...9amantnr keyfigure was not in infocube ..but i added into my pos ...
Please suggest me ..
Thanks!
Kriss.

thank you Senthil ,
So ,i need to maintain 9amantnr key figure in BW As well ??Just i added this keyfigure in my pos and initialized the planning area .
Is it necessary to update infocube with 9amantr ??
Please suggest me .
Thanks!
Kriss

How to run the Transaction Code - BIC for Bank keys uploading

Hi
How to run the Transaction Code - BIC for Bank keys uploading.
please give me suggestion.
Thanks
Indu

Go to BIC transaction screen
Fill the selection screen parameters as below
1. Update Run (Test Run: Check Off: Real Run:Check On)
2. Set Deletion Flag (Check On)
3. Maximum no. of records: 999999
4. Detail List (Check On)
5. Display variant: 1SAP
6. Presentation server (Select Radio Button)
7. Application server (Deselcet Radio button)
8. File name and Path: Select relavant file which is to be upload
9. Bank country: If needed (Give respective country name)
10. Select execute button or F8
NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
Hope this will meet your requirement
Thanks.

How to run the job using DBMS_SCHEDULER

How to run the job using DBMS_SCHEDULER
pleas give some sample Iam very new to DBMS_SCHEDULER

Hi
DBMS_SCHEDULER
In Oracle 10g the DBMS_JOB package is replaced by the DBMS_SCHEDULER package. The DBMS_JOB package is now depricated and in Oracle 10g it's only provided for backward compatibility. From Oracle 10g the DBMS_JOB package should not be used any more, because is could not exist in a future version of Oracle.
With DBMS_SCHEDULER Oracle procedures and functions can be executed. Also binary and shell-scripts can be scheduled.
Rights
If you have DBA rights you can do all the scheduling. For administering job scheduling you need the privileges belonging to the SCHEDULER_ADMIN role. To create and run jobs in your own schedule you need the 'CREATE JOB' privilege.
With DBMS_JOB you needed to set an initialization parameter to start a job coordinator background process. With Oracle 10g DBMS_SCHEDULER this is not needed any more.
If you want to user resource plans and/or consumer groups you need to set a system parameter:
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
Baisc Parts: Job
A job instructs the scheduler to run a specific program at a specific time on a specific date.
Programs
A program contains the code (or reference to the code ) that needs to be run to accomplish a task. It also contains parameters that should be passed to the program at runtime. And it?s an independent object that can referenced by many jobs
Schedules
A schedule contains a start date, an optional end date, and repeat interval with these elements; an execution schedule can be calculated.
Windows
A window identifies a recurring block of time during which a specific resource plan should be enabled to govern resource allocation for the database.
Job groups
A job group is a logical method of classifying jobs with similar characteristics.
Window groups
A window groups is a logical method of grouping windows. They simplify the management of windows by allowing the members of the group to be manipulated as one object. Unlike job groups, window groups don?t set default characteristics for windows that belong to the group.
Using Job Scheduler
SQL> drop table emp;
SQL> Create table emp (eno int, esal int);
SQL > begin
dbms_scheduler.create_job (
job_name => 'test_abc',
job_type => 'PLSQL_BLOCK',
job_action => 'update emp set esal=esal*10 ;',
start_date => SYSDATE,
repeat_interval => 'FREQ=DAILY; INTERVAL=10',
comments => 'Iam tesing scheduler');
end;
PL/SQL procedure successfully completed.
Verification
To verify that job was created, the DBA | ALL | USER_SCHEDULER_JOBS view can be queried.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_abc FALSE 0
Note :
As you can see from the results, the job was indeed created, but is not enabled because the ENABLE attribute was not explicitly set in the CREATE_JOB procedure.
Run your job
SQL> begin
2 dbms_scheduler.run_job('TEST_abc',TRUE);
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_ABC FALSE 0
Copying Jobs
SQL> begin
2 dbms_scheduler.copy_job('TEST_ABC','NEW_TEST_ABC');
3 END;
4 /
PL/SQL procedure successfully completed. Hope it will help you upto some level..!!
Regards
K

How to change the update servers target location?

Hi i just bought a used MacBook from a friend i have been having a problem when trying to use the software update. when i click on software update it says it can not connect to the update server and that i should use network diagnostics. when i click on it it says network seems to be fine but on the left side it shows a red light where server is and says failed i click on run diagnostics and it says "network diagnostics was able to connect to the internet but not to the server "(not showing the server for privacy reasons)" This could be caused by problems with the server, or an internet problem between this computer and the server."
The server name which i did not list was my friends old job server. i just want to know how to change the update servers target location so it will stop trying to connect to his jobs server so it will allow me to update my software from my home wifi thanks

Your friend has configured this computer in some way to prevent a user from accessing Apple's update servers. This was probably done for security purposes. You might check if the firewall has been activated - Open the Security preferences, click on the Firewall tab. If the firewall is turned on, then turn it off. This should fix the problem.
However, if your friend has made other modifications, then you will need to ask him/her what you will need to do to remove them.

How to run a update from APEX 2.1 to APEX 2.2???

I am using version 2.1, and I want to update to 2.2, I downloaded the file from OTN, but after unziping, I found it is not a simple exe file but a bunch of sql and other files, how to run the upgrading, I think it is too diffficult in that way.
How many files I need to run in the SQL plus?
Which one is the one I need?
Puzzled?

So there will be no upgrading for Oracle DB XB APEX?The way you ask that implies that I said that this will never be possible and that is not what I said.
If I want to upgrade to 2.2, I need DBs other than XE?Today you have the option of installing Application Express 2.2 in Oracle Database 9iR2 or the SE, SE1, or EE editions of Oracle 10g Database.
Scott

How to run the form that is only installed on a PC and not using a server?

Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.

Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to run the ejb project in j2ee server

How to run the EJB project.
I give like
java conveterClient converterClient.jar
here conveterClient is class file name and converterClient.jar is deployed file
like wise i give some exception is come
give some help pls friends

Navigate to the "DBOrders" module in the catalog, right click on the "ORDERS" database below and click "Export Schema Stucture". That will produce a file containing the DML needed to create the database

HOw to run the Applet in dos mode

how to run the applet in Command Prompt(DOS).
I have save this in directory D/vijay/javap/A.java and my JDK is in C drive.
Plz send me reply as soon as possible.
My code is :-
import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
 w = 45;
 h = 50;
public void paint(Graphics g)
 g.drawRect(w, h, 20, 80);
}

import java.applet.*;
import java.awt.*;
public class A extends Applet
private int w, h;
public void init( )
w = 45;
h = 50;
public void paint(Graphics g)
g.drawRect(w, h, 20, 80);
<applet class="A" height="200" width="200" code="A.class">
</applet>
*/And in command prompt
javac A.java
appletviewer A.java
Message was edited by:
passion_for_java

How to display the updated data from db to user interface in sruts framewor

A beginner in this area, I have been able to read a record from a
MySQL database and populate in jsp form . Now, my goal is to
allow the user to edit the contents of the form and then update the
record in MySQL and then display the same in jsp. page
The scenario in detail
1)the data is fetched from db and displayed in non-editable format
2)Next button is clicked
3)Now in the same jsp page I view the same data from db in editable format
4)The user is allowed to change the information
5)Now update button is clicked
6)the records are updated in the db -Finished doing till this step
7)But the updated info in non - editable format to be displayed in jsp page is left pending.
Here is my code for jsp,i want know how to write an action for this,tried doing the same in java and I'm successful.but what I need is how to fetch the updated information in the user interface.
I've made both editable as well as non editable info in the same page with different actions.
pl help me,I'm a newbie
<%@ taglib uri="/WEB-INF/struts-bean" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html" prefix="html" %>
<%@ taglib uri="/WEB-INF/struts-logic" prefix="logic" %>
<%@ page language="java" %>
<%@ page import="java.util.ArrayList,java.util.Iterator" %>
<%@ page import="com.finocus.common.container.CustomerDetailsTest;" %>
<html:html>
<head>
 <title>CUSTOMER DISPLAY</title>
</head>
<body>
 <table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><table width="100%" bgcolor="indigo">
 <tr>
 <td>Display</td>
 <td>Update</td>
 <td>Verify</td>
 <td>Confirm</td>
 </tr>
 </table>
 </td>
 </tr>
<%
 //Container for holding data
 ArrayList list = (ArrayList)session.getAttribute("CUSTOMERDETAILS");
 Iterator itr=list.iterator();
 while(itr.hasNext())
 CustomerDetailsTest cust = (CustomerDetailsTest) itr.next();
 System.out.println("testGetCustomerDetails()-successed. retrieved CustomerDetailsTest="+cust.toString());
%>
<%
 //Session for checking whether edit or non-edit mode
 String pageMode = (String)session.getAttribute("CUSTOMER_PAGE_MODE");
 session.removeAttribute("CUSTOMER_PAGE_MODE");
 if(null==pageMode)
 pageMode = "EDIT";
 if(pageMode.equals("EDIT"))
 //display data in the form
 System.out.println("Editable mode");
%>
 <html:form action="/nonedit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><html:text property="name" value="<%=cust.getCname()%>"/></td>
 <td><bean:message key="label.cphone"/></td>
 <td><html:text property="phone" value="<%=cust.getCphone()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><html:text property="address1" value="<%=cust.getCaddress1()%>"/></td>
 <td><bean:message key="label.cemail"/></td>
 <td><html:text property="email" value="<%=cust.getCemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><html:text property="address2" value="<%=cust.getCaddress2()%>"/></td>
 <td><bean:message key="label.cfax"/></td>
 <td><html:text property="fax" value="<%=cust.getCfax()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><html:text property="city" value="<%=cust.getCcity()%>"/></td>
 <td><bean:message key="label.czip"/></td>
 <td><html:text property="zip" value="<%=cust.getZip()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><html:text property="state" value="<%=cust.getCstate()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><html:text property="adminname" value="<%=cust.getAname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><html:text property="adminemail" value="<%=cust.getAemail()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><html:text property="adminphone" value="<%=cust.getAphone()%>"/></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><html:text property="adminusername" value="<%=cust.getUname()%>"/></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><html:text property="adminuseremail" value="<%=cust.getUemail()%>"/></td>
 </tr> 
 <tr align="center">
 <td><html:cancel value="Cancel"/>
 <html:submit value="Next"/></td>
 </tr>
 </html:form>
<%
 }else
 //display data in the text
 System.out.println("Non-Editable mode");
%>
 <html:form action="/edit">
 <tr>
 <td><table width="100%" bgcolor="darkkhaki">
 <tr>
 <td><bean:message key="label.id"/></td>
 <td><%=cust.getCusId()%></td>
 <td><bean:message key="label.status"/></td>
 <td><%=cust.getStatus() %></td>
 </tr> 
 <td>
 
 <bean:message key="label.Company"/>
 </td> 
 <tr>
 <td><bean:message key="label.cname"/></td>
 <td><%=cust.getCname()%></td>
 <td><bean:message key="label.cphone"/></td>
 <td><%=cust.getCphone()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr1"/></td>
 <td><%=cust.getCaddress1()%></td>
 <td><bean:message key="label.cemail"/></td>
 <td><%=cust.getCemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.caddr2"/></td>
 <td><%=cust.getCaddress2()%></td>
 <td><bean:message key="label.cfax"/></td>
 <td><%=cust.getCfax()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.ccity"/></td>
 <td><%=cust.getCcity()%></td>
 <td><bean:message key="label.czip"/></td>
 <td><%=cust.getZip()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.cstate"/></td>
 <td><%=cust.getCstate()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.Admin"/>
 </td> 
 <tr>
 <td><bean:message key="label.AAname"/></td>
 <td><%=cust.getAname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAemail"/></td>
 <td><%=cust.getAemail()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AAphone"/></td>
 <td><%=cust.getAphone()%></td>
 </tr> 
 <td>
 
 <bean:message key="label.User"/>
 </td> 
 <tr>
 <td><bean:message key="label.AUname"/></td>
 <td><%=cust.getUname()%></td>
 </tr> 
 <tr>
 <td><bean:message key="label.AUemail"/></td>
 <td><%=cust.getUemail()%></td>
 </tr> 
 <tr align="center">
 <td><html:submit value="Update"/></td>
 </tr>
 </html:form>
<%
%>
<%
%>
 </table>
 </td>
 </tr>
 </table>
</body>
</html:html>

u r using action classes. so after calling the insert method in Action Class to a dao... the next statement should be retrieve statement. so at the time of updating first it will get updated.. the next statement it will execute is retrieve and then set these details in VO or FORM and show it on JSP
Message was edited by:
leo_michael

Missing update for a game app after updating ios7 any ideas how to get the update

Went to update a game app this morning, had already hit update when the i os7 update screen popped went through with the ios update but after ipad restarted the game update is completely missing any ideas how to get the update back no luck so far

Hello THEVIN7
The next step if it is not updating, would be to delete the app and then download it again. Check out the general troubleshooting for apps purchased form the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/ts1702
Regards,
-Norm G.

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update

I have an older mac and it wants me to update to itunes 10 but my mac is too old and I cant figure out how to disable the update so I can use the store.

If Software Update is offering the update then it would be compatible with your model. Unfortunately, you haven't provided us with any information on your hardware that would enable us to determine if it really is too old.
If you really wish to disable the update alert then the next time Software Update opens, select the update in the list then select "Ignore update" from SU's Update menu.

ınstructıons on how to run the updater

Similar Messages

Maybe you are looking for