Insufficient access priviledges?

Hi folks...
please help out a Mac newbie here
I'm dragging and dropping some crowd walla from the included FX in L8, and when I dropped it onto the arrange page, I got an error message saying "
"Audio file Crowd Walla 2.CAF hasn't got sufficient access priviledges so the overview cannot be saved!"
What's that mean? Please?
thanks!

I'm seeing this as well, but I don't have different partitions.
I already had GarageBand and all the Jam Packs installed before I installed Logic Studio 8. I left the Jam Packs where they were - and everything is installed in the default locations on the boot volume.
When I drag loops from the loop browser, I get the same error message. I seem to be able to use the loops fine - but I have no idea what the overview is and what it means that it can't be used, or if something is really wrong behind the scenes. Thanks for any help or clues.

Similar Messages

I downloaded an album and one single song just fine and then bought a second song and I keep getting an error message that says, You don't have enough access priviledges. What can I do to download this song?

I downloaded an album and one single that I purchased just fine and then purchases another single and I keep getting an error message that says, You don't have enough access priviledges. What can I do to get this song? I am just going to have to ask for a refund and forget it?

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

Ecm11g sitestudio:insufficient access to contributor mode

hi All,
I am new comer for wcm, I am using ecm11.1.1.4 sitestudio on winxp, I enabled sitestudio,ssxa, sitestudio publisher components, I updated jdev11.1.1.4 with zip file under Oracle_ECM1\ucm\Distribution, I followed the steps in http://download.oracle.com/docs/cd/E17904_01/doc.1111/e13650/ssxa_creatingsites.htm, while when I came to the step of the following:
3.2.12 Adding a Placeholder to the Home Page
15.Click the Switch Placeholder Definition Role value, and select the admin security role from the drop-down list.
In this step, I can't find "Switch Placeholder Definition Role" in my SiteStudioDemo.xml, so I jumped over this step, but when I run the startSiteStudioDemo.jspx, press ctrl+shift+F5, login with weblogic/weblogic1, IE displayed an error message showing insufficient access to create placeholder, the wls startup console showed the following message:
================
intradoc.common.ServiceException: !csUserInsufficientAccess,weblogic
at intradoc.server.ServiceRequestImplementor.buildServiceException(Servi
ceRequestImplementor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2260)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2254)
at intradoc.server.ServiceSecurityImplementor.validateSecurityPrivilegeL
evel(ServiceSecurityImplementor.java:813)
at intradoc.server.ServiceSecurityImplementor.globalSecurityCheck(Servic
eSecurityImplementor.java:364)
at intradoc.upload.UploadSecurityImplementor.globalSecurityCheck(UploadS
ecurityImplementor.java:57)
at intradoc.server.Service.globalSecurityCheck(Service.java:2671)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImp
lementor.java:678)
at intradoc.server.Service.doRequest(Service.java:1890)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:435
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:2
65)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
==========================
Since I didn't finish step 3.2.12.15 mentioned above, I doubt that was the reason for the issue, the point is why I couldn't see "Switch Placeholder Definition Role" when I edited SiteStudioDemo.xml?
Best regards

Hi Srinath,
Thank you very much for your answer.
To be sure, the issue is the following :
[localhost oracle /u01/app/oracle/product/Middleware/user_projects/domains/webcenter/bin]$ <Jan 27, 2012 6:47:16 AM PST> <Error> <HTTP> <BEA-101020> <[ServletContext@24412361[app:pocIaEnterpriseApplication module:pocIA-Project1-context-root path:/pocIA-Project1-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalArgumentException: The file weblogic.jsp.wlw.util.filesystem.mds.MDSFile@1da7214 is not a source file
at weblogic.jsp.internal.CPL.addSourceFile(CPL.java:632)
at weblogic.jsp.internal.CPL.addSourceFiles(CPL.java:616)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:140)
at weblogic.servlet.jsp.ResourceProviderJavelinxJspStub.compilePage(ResourceProviderJavelinxJspStub.java:78)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
Truncated. see log file for complete stacktrace
>
<Jan 27, 2012 6:47:16 AM PST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'SSXA_server1' has triggered at Jan 27, 2012 6:47:16 AM PST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Jan 27, 2012 6:47:16 AM PST SERVER = SSXA_server1 MESSAGE = [ServletContext@24412361[app:pocIaEnterpriseApplication module:pocIA-Project1-context-root path:/pocIA-Project1-context-root spec-version:2.5]] Servlet failed with Exception
java.lang.IllegalArgumentException: The file weblogic.jsp.wlw.util.filesystem.mds.MDSFile@1da7214 is not a source file
at weblogic.jsp.internal.CPL.addSourceFile(CPL.java:632)
at weblogic.jsp.internal.CPL.addSourceFiles(CPL.java:616)
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:140)
at weblogic.servlet.jsp.ResourceProviderJavelinxJspStub.compilePage(ResourceProviderJavelinxJspStub.java:78)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:256)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:216)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:243)
at weblogic.servlet.jsp.ResourceProviderJspStub.execute(ResourceProviderJspStub.java:59)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:416)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:326)
As JP says, I have followed the official tutorial and some configurations seem to be obsolete because I can't find it in JDeveloper.
Do you know if Oracle will publish an updated tutorial ?
Thank you,
Romain.
Edited by: 910491 on 27 janv. 2012 06:43

ITunes library filoe cannot be saved. You do not have enough access priviledges for this operation

I get this message when I download from the Store. I am an Administrator on my PC. Anybody know how to fix it?
"ITunes library file cannot be saved. You do not have enough access priviledges for this operation"

Hello deborahjael,
Thanks for using Apple Support Communities.
To troubleshoot this error message in iTunes please follow the directions in the link below.
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Take care,
Alex H.

Error while configuring SSL in OID 11g - LDAP 50 Insufficient Access rights

HI,
I am trying to configure SSL in OID 11g.As per the doc http://download.oracle.com/docs/cd/E12839_01/oid.1111/e10029/ssl.htm#CBHGBGAF ,i tried creating a Self-Signed Wallte using Fusion Middleware control,But i am getting an error LDAP 50: Insufficient access rights".I logged into Fusion Middle Ware control as Weblogic user.Is anybody faced this issue?.Thanks in advance.

I am not sure how you tried, but I would recommend to do the following...
1. Add the 'user1' to "OU=Franchisees,ou=People,dc=company,dc=com"
2. Delete the 'user1' from 'OU=Internal,ou=People,dc=company,dc=com'

Portal LDAP permission problems: Login causing "Insufficient access"

Hello,
We have OID / Portal / 10gAS version 9.0.4.1 in development and production. We are using the 10gAS as a J2EE webapp server and the OID server as an LDAP server. Portal was working, but we had to make modifications to the default ACP's in OID for our DIT to be secure.
Bottom line:
Logging in as a user to portal yields:
" Unexpected error encountered in wwsec_app_priv.process_signon (User-Defined Exception) (WWC-41417)
An exception was raised when accessing the Oracle Internet Directory: 50: Insufficient access
Details
Operation: dbms_ldap_utl.get_group_membership. (WWC-41743)
Looking back at the ACL trace yields the following:
BEGIN
2004/12/10:08:57:25 * ServerWorker:4 * ConnID:31 * OpId:1 * OpName:search
gslsfbiDumpSubscribedGroups: Op. ID: <1> Subscribed Orclprivilege Groups for the user DN: <orclapplicationcommonname=portal.040405.1647,cn=portal,cn=products,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group0 for the user DN:<cn=authenticationservices,cn=groups,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group1 for the user DN:<cn=userproxyprivilege,cn=groups,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group2 for the user DN:<cn=oracledascreateuser,cn=groups,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group3 for the user DN:<cn=oracledascreategroup,cn=groups,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group4 for the user DN:<cn=common group attributes,cn=groups,cn=oraclecontext>
08:57:25 * Op. ID: <1> Group5 for the user DN:<cn=oracledasconfiguration,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * Op. ID: <1> Group6 for the user DN:<cn=authenticationservices,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * Op. ID: <1> Group7 for the user DN:<cn=userproxyprivilege,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * Op. ID: <1> Group8 for the user DN:<cn=oracledascreateuser,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * Op. ID: <1> Group9 for the user DN:<cn=oracledascreategroup,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * Op. ID: <1> Group10 for the user DN:<cn=common group attributes,cn=groups,cn=oraclecontext,dc=tekelec,dc=com>
08:57:25 * gslsfbiDumpSubscribedGroups: Op. ID: <1> Subscribed Orclacp Groups for the user DN: <orclapplicationcommonname=portal.040405.1647,cn=portal,cn=products,cn=oraclecontext>
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Entry DN:(uid=saitken,cn=users,dc=tekelec,dc=com)
08:57:25 * gslfacZEvaluate_Filter: Operation id:(1) User DN: (orclapplicationcommonname=portal.040405.1647,cn=portal,cn=products,cn=oraclecontext)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Visiting ACP at: (cn=users,dc=tekelec,dc=com)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Filter Accees denied by ACP: (cn=users,dc=tekelec,dc=com)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) User being Privileged group member, Evaluation continues
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Visiting ACP at: (dc=tekelec,dc=com)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Visiting ACP at: (dc=com)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Filter Accees denied by ACP: (dc=com)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) User being Privileged group member, Evaluation continues
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Visiting ACP at: (cn=root)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) Filter Accees denied by ACP: (cn=root)
08:57:25 * gslfacZEvaluate_Filter:Operation id:(1) User being Privileged group member, Evaluation continues
08:57:25 * gslfacZEvaluate_Filter: Op id:(1) Filter Access to entry (uid=saitken,cn=Users,dc=tekelec,dc=com) not allowed
08:57:25 * INFO: gslfrsDSendSearchEntry : Access to filter attributes not allowed
END
The interpretation of this is that the service account "(orclapplicationcommonname=portal.040405.1647,cn=portal,cn=products,cn=oraclecontext)" does not have sufficient privileges to "Op id:(1) Filter Access to entry" or, "Browse the entry" with the DN "uid=saitken,cn=Users,dc=tekelec,dc=com". This is the user I am attempting to log in as.
The current ACP entries against the "users" container that is causing the deny.. "Filter Accees denied by ACP: (cn=users,dc=tekelec,dc=com)" seems to be the problem.
The real issue is that "entry level" access should be possible by all users in the system. The ACP entries I have on the 'users' entry / container is as follows:
- orclaci: access to entry by self (browse)
- orclaci: access to entry filter=(objectclass=tekuser) by * (browse) by group="cn=service accounts,cn=groups,dc=tekelec,dc=com" (browse,delete) by group="cn=it - user admins,cn=groups,dc=tekelec,dc=com" (browse,delete)
- orclaci: access to entry filter=(objectclass=inetorgperson) by group="cn=oracledascreateuser, cn=groups,cn=OracleContext,dc=tekelec,dc=com" added_object_constraint=(objectclass=orcluser*) (browse,add) by group="cn=oracledasdeleteuser, cn=groups,cn=OracleContext,dc=tekelec,dc=com" (browse,delete) by group="cn=oracledasedituser, cn=groups,cn=OracleContext,dc=tekelec,dc=com" (browse) by group="cn=UserProxyPrivilege, cn=Groups,cn=OracleContext,dc=tekelec,dc=com" (browse, proxy) by dn="orclApplicationCommonName=DASApp, cn=DAS, cn=Products,cn=oraclecontext" (browse,proxy) by self (browse, nodelete, noadd) by group="cn=Common User Attributes, cn=Groups,cn=OracleContext,dc=tekelec,dc=com" (browse)
All users under the "Users" container are of objectclass 'tekuser'. The last ACP point was massaged from the original install of Portal.
The real clincher that I don't understand is that the single entry "access to entry filter=(objectclass=tekuser) by * (browse)" should be allowing browse access to my entry to everyone! (Including the service account for portal!)
So, as I wind around this ball of wax, I deparately seek assistance. I understand the complexities of ACP's and know of a few problems, but nothing that would cause this.
Does anyone have any insight? Any feedback is greatly appreciated!
The best thing that I could have right now would be a spec (or requirements) of permission configuration against an LDAP server (or OID) for Portal to perform it's normal tasks. Unfortunately, I have yet to find any docos on ACL requirements of Portal. :(
-Sean

Sean: Did you find an answer to your issue. We seem to be experiencing the same issue here - but not much help for the Error - WWC-41743.
Error Text - Operation: dbms_ldap.modify_s
Entry DN: cn=AUTHENTICATED_USERS,cn=portal.050125.132734.548814000,cn=groups,dc=us,dc=deloitte,dc=com
Changes
uniquemember: Add: cn=invcm1,cn=users,dc=us,dc=deloitte,dc=com.
Would appreciate any help. You can send mail to [email protected]
Thank you again!
Shomic

Dp* commands failed w/ SMSLdapObject: insufficient access rights to access

My dpadmin list/modify fails to execute. The amSMS log is below. What aci I lost? Any help is appreciated.
Regards
11/20/2005 03:17:15:659 AM MST: Thread[main,5,main]
SMSEntry: cache enabled: true
11/20/2005 03:17:16:023 AM MST: Thread[main,5,main]
SMSLdapObject: LDAP Initialized successfully
11/20/2005 03:17:16:349 AM MST: Thread[main,5,main]
Initialized LDAPEvent listner
11/20/2005 03:17:16:412 AM MST: Thread[main,5,main]
CachedSubEntries::getInstance DN: ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:432 AM MST: Thread[main,5,main]
CachedSMSEntry::getInstance: ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:441 AM MST: Thread[main,5,main]
SMSLdapObject.read() retry: 0
11/20/2005 03:17:16:451 AM MST: Thread[main,5,main]
WARNING: SMSLdapObject: insufficient access rights to access DN=ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:461 AM MST: Thread[main,5,main]
ERROR: CachedSubEntries: unable to register for notifications:
Message:The user does not have permission to perform the operation.
at com.sun.identity.sm.ldap.SMSLdapObject.read(SMSLdapObject.java:231)
at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:334)
at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:326)
at com.sun.identity.sm.SMSEntry.<init>(SMSEntry.java:162)
at com.sun.identity.sm.CachedSMSEntry.getInstance(CachedSMSEntry.java:307)
at com.sun.identity.sm.CachedSubEntries.<init>(CachedSubEntries.java:72)
at com.sun.identity.sm.CachedSubEntries.getInstance(CachedSubEntries.java:204)
at com.sun.identity.sm.ServiceManager.getVersions(ServiceManager.java:409)
at com.sun.identity.sm.ServiceManager.serviceDefaultVersion(ServiceManager.java:427)
at com.sun.identity.sm.ServiceConfigManager.<init>(ServiceConfigManager.java:94)
at com.iplanet.am.sdk.AMCommonUtils.populateManagedObjects(AMCommonUtils.java:497)
at com.iplanet.am.sdk.AMCommonUtils.<clinit>(AMCommonUtils.java:113)
at com.iplanet.am.sdk.AMStoreConnection.<clinit>(AMStoreConnection.java:141)
at com.sun.portal.desktop.context.DSAMEConnection.<init>(DSAMEConnection.java:89)
at com.sun.portal.desktop.context.DSAMEAdminDPContext.init(DSAMEAdminDPContext.java:110)

- what's the complete command ?
- which user is used ?
/ulf

SMSLdapObject: insufficient access rights to access

The dpadmin command failed w/ SMSLdapObject: insufficient access rights to access. The amSMS log is below. What aci did I lose? Any help is appreciated.
Regards
11/20/2005 03:17:15:659 AM MST: Thread[main,5,main]
SMSEntry: cache enabled: true
11/20/2005 03:17:16:023 AM MST: Thread[main,5,main]
SMSLdapObject: LDAP Initialized successfully
11/20/2005 03:17:16:349 AM MST: Thread[main,5,main]
Initialized LDAPEvent listner
11/20/2005 03:17:16:412 AM MST: Thread[main,5,main]
CachedSubEntries::getInstance DN: ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:432 AM MST: Thread[main,5,main]
CachedSMSEntry::getInstance: ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:441 AM MST: Thread[main,5,main]
SMSLdapObject.read() retry: 0
11/20/2005 03:17:16:451 AM MST: Thread[main,5,main]
WARNING: SMSLdapObject: insufficient access rights to access DN=ou=DAI,ou=services,dc=sun,dc=com
11/20/2005 03:17:16:461 AM MST: Thread[main,5,main]
ERROR: CachedSubEntries: unable to register for notifications:
Message:The user does not have permission to perform the operation.
at com.sun.identity.sm.ldap.SMSLdapObject.read(SMSLdapObject.java:231)
at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:334)
at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:326)
at com.sun.identity.sm.SMSEntry.<init>(SMSEntry.java:162)
at com.sun.identity.sm.CachedSMSEntry.getInstance(CachedSMSEntry.java:307)
at com.sun.identity.sm.CachedSubEntries.<init>(CachedSubEntries.java:72)
at com.sun.identity.sm.CachedSubEntries.getInstance(CachedSubEntries.java:204)
at com.sun.identity.sm.ServiceManager.getVersions(ServiceManager.java:409)
at com.sun.identity.sm.ServiceManager.serviceDefaultVersion(ServiceManager.java:42 7)
at com.sun.identity.sm.ServiceConfigManager.<init>(ServiceConfigManager.java :94)
at com.iplanet.am.sdk.AMCommonUtils.populateManagedObjects(AMCommonUtils.java:497)
at com.iplanet.am.sdk.AMCommonUtils.<clinit>(AMCommonUtils.java:113)
at com.iplanet.am.sdk.AMStoreConnection.<clinit>(AMStoreConnection.java:141)
at com.sun.portal.desktop.context.DSAMEConnection.<init>(DSAMEConnection.jav a:89)
at com.sun.portal.desktop.context.DSAMEAdminDPContext.init(DSAMEAdminDPContext.jav a:110)

- what's the complete command ?
- which user is used ?
/ulf

Orcladmin: "Insufficient access right to perform action" using oidadmin

After sucessfully installing OID from 8.1.7 CD on Sun Solaris 8
(SPARC) I can start the monitor and the oidldap. After
sucessfully connecting with orcladmin using oidadmin I always get
the same error (either using oidadmin on windows or solaris) when
accessing "entry management", "schema management" or "audit log
management":
Insufficient access right to perform action.
but the default ACP allows everyone (browse add delete)
anyone else had the same problem?
I tried to create the name server with OID with netca which
obviously does not work either.

Hi Christian:
You say that you conencted to OID as "oidadmin". Since OID does
not have any user account called "oidadmin" you were probably
conencted as an anonymous user. If you are trying to connect as
the administrator of OID the correct user account name is
"orcladmin" with a default password of welcome. Try this and let
me know if you sitll have troubles.
Thanks,
Jay Tomlinson

IFS-30027: Insufficient access to create a SchemaObject

I receive the following error when I to parse a XML file. IFS-
21005 indicates, I need administrator mode. What I want know is
this misleading and I just need to modify the ACL or does the
administrator need grant a higher level of access?
oracle.ifs.common.IfsException: IFS-30002: Unable to create new
LibraryObject oracle.ifs.common.IfsException: IFS-30027:
Insufficient access to create a SchemaObject
oracle.ifs.common.IfsException: IFS-21005: Administrator mode is
required for this operation
Thanks,
Art

If the XML file you are uploading is specifying the creation of a
SchemaObject (e.g. a ClassObject, ValueDomain, ClassDomain, or
ValueDefault), the session must be in admin mode. There is no
way to circumvent this by changing an ACL.
regards,
dave

Insufficient access rights registering Oracle Directory Integration Server

Hi all!
following steps IÂ´ve done to use the Oracle Directory Integration Server.(IÂ´ve installed Oracle 10g infrastructure - OID is running - IÂ´m also able to apply successful with ODM and orcladmin account)
- oidctl connect=mydb1 server=odisrv instance=1 stop
- odisrvreg -h localhost -p 389 -D cn=orcladmin,cn=Users,dc=localhost;dc=com -w ,pass
where pass is the password of orcladmin.
-> now I get the following error:
registering..
Error javax.naming.NoPermissionException [LDAP:error code 50: Insufficient Access Rights]; remaining name 'cn=odisrv+orclhostname=maschine,cn=odi,cn=oracle internet directory' !
Any idea ??
Thanks for all help & comments.

I have gone through the documentation for creating the script. But there is one thing which I am not able to understand i.e. Subscription Parameters.
Can anyone tell me the use of subscription parameters? What is the role of subscription parameters in Oracle Lite and External Authentication.
Regards
Kapil

How do I fix itunes error 45054. I cannot open itunes. Also saw message not enough access priviledges. How do I fix this problem?

How do I fix itunes error 45054. I cannot open itunes. Also saw message not enough access priviledges. How do I fix this problem?

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

"Code -5000--- "insufficient access privileges for operation"

I use a M-Audio Ozonic, Digidesign Mbox, and a BCF2000 logic control.
Whenever I try to initiate an audio recording, this message pops up
"Insufficient access privileges for operation
Result code = -5000"
Has anyone encountered this. This is a new issue. has never happened before.
17" iMac G5 1.6 Ghz Mac OS X (10.4.7) 2 GB RAM w/ Logic express 7, Garageband, ProTools 6.4 LE w/ software bundle & Mbox. Ozonic, BCF2000

Did you upgrade os x or create a new user?
Select the folder icon here you save your audio projects and type Command I to open the information panel, then verify if you are the owner of the disk and if you have read/write permissions.
cheers
rob

Unable to import pab ldif file. Insufficient Access

I am in the process of upgrading from iMS 5.2 w/iDS 4.16 on an NT box to iMS 5.2 w/iDS 5.1 on Solaris 9.
And , yes I am new to solaris, but that is another story.....
I have successfully installed solaris, iDS 5.2, run the ims_dssetup.pl script, installed iMS 5.2 servers, and gotten everyting to work. I have successfully imported my users by using .ldif files. My problem is that when I try to import the pab entries from an ldif file, all the entries get rejected with the error "Insufficient Access".
I should add that I am doing this on a SunFire V210 with no video card, mouse or keyboard. In other words through the mgmt port and using a windows workstation to access the administration and directory servers.
I'm at wits end.... do I go left or right?
Thanks in advance..

I am logging into the administration server from my windows workstation as admin (administration server user) and i believe this to be the same user as the configuration directory user admin. I am opening the server group and opening the directory server window. I then go to the configuration tab and click on Console > Import database. I then select the file on my local windows workstation(choosing one on the server seems to not be an option) and click ok.
it then procedes to reject the entries.
I did try to do an ldapadd -d DirectoryManager -w password -f filename.ldif from the ldap server instance directory, but got basically the same results..
What am I doing wrong?

"insufficient access privileges"?

My computer claims "insufficient access privileges" when I try to play certain songs I have purchased. These files corrupt or something, and then never play at all, or never play all the way through again. It just happened to a song I JUST bought, it wouldn't play even once!
I can try to redownload it, but it then says the computer is not authorized (it is). When I type in my password to re-authorize it, it tells me this computer is already authorized (duh)... then I try to play it and the loop continues.
It's so frustrating, I a paying for songs then not allowed to listen to them! What's up with this?

Locate the file in the Finder and choose Get Info from the File menu. Under Ownership & Permissions, change the settings so that you have Read & Write access to it. If it is listed as a folder or package in the Get Info window, you may need to apply the permissions to enclosed items as well.
(19150)

Insufficient access priviledges?

Similar Messages

Maybe you are looking for