Integrating LDAP with sunforum

hello
we are having netscape directory server 4.1, nd iplanet messaging server 5.2 on Solaris 2.9, with ldap running on it, on our intranet.
nd also installed sunforum 3.2 (downloaded from net)
what we want is, we want to integrate ldap and sunforum, for use of video conferencing, VoIP, nd sharing of data, between our messaging users,
1st i want to know, Whether is it possible or not?
2ndly if possible, how to integrate these two?
how to logon to ldap directory server in sunforum 3.2
if anybdy know about this how to do this, kindly reply..
thanks in advance..

hello
we are having netscape directory server 4.1, nd
iplanet messaging server 5.2 on Solaris 2.9, with
ldap running on it, on our intranet.
nd also installed sunforum 3.2 (downloaded from net)
what we want is, we want to integrate ldap and
sunforum, for use of video conferencing, VoIP, nd
sharing of data, between our messaging users,
1st i want to know, Whether is it possible or not?Yes it is possible to integrate SunForum and LDAP.
SunForum 3.2 has native support for Netscape DS 4.1.
2ndly if possible, how to integrate these two?Run the script /opt/SUNWdat/config/sf-ldap-config
how to logon to ldap directory server in sunforum
3.2This is explained in the Sun Forum User Guide
http://docs.sun.com/app/docs/doc/816-1114
>
if anybdy know about this how to do this, kindly
reply..
thanks in advance..

Similar Messages

  • Porns n cons of Integrating LDAP with SAP Netweaver

    Hello techies...
    We are going to integrate LDAP with ECC 6.0..
    If somebody can let me know the pros and cons of Integratning LDAP with ECC..
    I heard from one of the techies that "if you integrate then you wont be able to create user id thorugh tcode SU01". is it true ?
    and i would also like to know the process of integrations.
    Thnx
    DL

    Hi Daniel,
    Only to avoid 3rd party Integration tool and as well as which costs when integrated to third-party systems.
    If MDM is used will it be additional cost when integrated with third party systems?If there is no additional cost incurred can you please provide the approach.
    Regards,
    Sharath

  • Integrating LDAP with Adobe Livecycle

    I desperately need assistance fixing some problems that I am facing.
    From the forum I came to know that we cant create users in the Livecycle, the only way is to create users using LDAP. I didnt had any Idea what LDAP is, so after a bit of browsing, I downloaded OpenLdap installer for windows and ran the server, created entries using a LDIF(sampl.ldif) file. The structure is something like this:
    Example.com
    |
    |adobelive
    |.user1
    |-name
    |-add
    |-email
    |.user2
    |-name
    |-add
    |-email
    |.user3
    |-name
    |-add
    |-email
    The LDAP server is running on the machine with ip 10.112.77.64 port 389 and Livecycle is installed on some other machine.
    Now in order to create user in Livecycle I followed the following steps:
    1. 1 I have created a new domain called newdom,
    2. added authentication as LDAP.
    I am not able to figure out what entries should go in the add directory page. Whether I should add a user or a group? Each time I try test server, I get an error message that say the server is not responding. Though I am able to connect from the browser to the server by typing ldap://10.112.77.64:389/.
    Where am I making mistake?
    Thanks a lot for help!

    The relevant part you are looking for is here
    http://www.cisco.com/en/US/partner/docs/collaboration/ecp/admin/3_1/guide/ecpportal.html#wp1117961
    Basically webex social syncs and authenticates directory to the AD and NOT via CUCM.
    You will find all the necessary details in the above guide
    HTH,
    Christos

  • Integrating EP with R/3, BW & third party systems such as LDAP directories

    Hi Expersts,
       I am looking for Integrating EP with R/3, BW & third party systems such as LDAP directories and Portal application development using HTMLB. Can any one send the related information. if you send the detailed documents with real time scenarios it could be very useful for me. Please send the docs to [email protected]
    Thanks in advance.

    hi praveen,
    refer to this links of integrating EP with BW.it will be useful....
    <b>https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6b1472a7-0301-0010-64bd-dc96509db6f7,
    The Architect's World - Episode 23>
    /* points r welcome for a helpful answer*/

  • Integrating OID with BPEL

    I would like to know if anyone has integrated oid with BPEL (standalone version)? Is there any documentation available for the same?

    The only files that I came across & made changes to are is_config, jazn.xml. It would be great if you could tell me if there any other files that needs to be configured? I copied the ldapclnt10.jar & ldap.jar into
    ...\BPEL\integration\orabpel\system\appserver\oc4j\j2ee\home\applib as sugegsted in another discussion forum. But that doesnt seem to solve the problem. Am getting NoClassDef found error now when I try to access the worklist.

  • Setting embedded weblogic ldap with UCM

    Hi All,
    I am integrating embedded ldap with UCM.  i went to server and change credential for ldap,then did make a connection with ldap browser jexplore
    I went to UCM and added a new provide as ldap provider
    Provider Name:
    LDAP
    Provider Description:
    Ldap
    Connection State:
    10 out of 10 connections are good
    Last Activity Date:
    None
    Provider Type:
    ldapuser
    Provider Class:
    intradoc.provider.LdapUserProvider
    Provider Connection:
    intradoc.provider.LdapConnection
    Source Path:
    oracle\Middleware
    LDAP Server:
    192.168.0.151
    LDAP Suffix:
    ou=people, ou=myrealm, dc=ucm_domain
    LDAP Port:
    7001
    Number of connections:
    10
    Connection timeout:
    10
    Priority:
    1
    Credential Map:
    SSL Enabled:
    No
    Attribute Map:
    givename : uFirstName;cn:dFullName;mail : dEmail;title : dUserType
    Role Prefix:
    Account Prefix:
    Account Permissions Delimiter:
    Default Network Accounts:
    #none
    Default Network Roles:
    guest
    Filter Groups:
    No
    Use Full Group Name:
    No
    LDAP Admin DN:
    cn=admin
    This is setting.is my ldap. Is all setting and suffix is correct or not? In my application when i am running the app, i am getting null as directory object. Please let me kow the right approach.

    This is apparently a compatability issue. The version of openLDAP that is available for Windows (the latest I found was v. 2.2.29) does not support "entryDN". However, WL 10.3 requires this attribute to be set (apparently available in openLDAP v. 2.4 and I am told - defined in RFC5020). Instead I converted my code to use the traditional static group. :-(
    (ex. setup at: http://blogs.oracle.com/jamesbayer/2007/08/using_openldap_with_weblogic_s.html)
    Anyway - I wanted to post the conclusion of this incase anyone else ran into this....

  • Integrating OEDQ with Active Directory - Disabling SSL

    Hi fellows,
    I've just installed OEDQ (latest release) on a Unix machine (deployed on WebLogic Server 10.3.6) but I've a couple of concerns:
    SSL Communication --> is it mandatory? I mean, I've tried to expose the dndirector admin page through an OHS Apache Web server. I'm able to access the admin page in plain mode but whenever I try to access a specific functionality (dashboard, user management, server configuration, etc) I'm being redirected to https://<web-server-hostname>:<wls-server-ssl-port>/dndirector, so this is not what I'm expecting. What's wrong? By the way, If SSL is mandatory, is there a way to expose the console via apache (avoiding any redirection)?
    OEDQ with Active Directory --> the following documentation -- Integrating OEDQ with Active Directory -- covers just the Single Sign-on configuration (on both Windows/Unix os). What about a simple configuration pointing to an external ldap? The documentation reports the following statement:
              It is also possible to configure OEDQ to work with different directory servers for user authentication and user identification. For information on alternative configurations, "see "Contact Us"
    So, how can I achieve that?
    Any pointers?
    Thanks in advance,
    Marco

    Hi Marco
    Was out of the office a bit - apologies for the delay.
    It looks like you removed these lines from the configuration:
    cdpad.auth  
    = ldap
    cdpad.auth.bindmethod
    = digest-md5
    cdpad.auth.binddn
    = search: sAMAccountName
    If these are not present, the user name is combined with @cdpsede.cassaddpp.it and used to login into AD.  Depending on how user names are setup, this may or may not work.
    If you replace the lines above, then the user account is searched for against the AD UserPrincipalName or the sAMAccountName attributes.  The value of the latter attributre is then used as the login attempt.
    So for example, if you enter the user name if marco.bonadonna, EDQ would search for an AD entry with userPrincipalName = [email protected] or with sAMAccountName = marco.bonadonna and then it would use the value of the sAMAccountName attribute to connect to AD (using digest-md5 for encryption) along with the password.
    If you use
    cdpad.auth.binddn = search: dn
    then EDQ will use the full distiinguished name (DN) of the entry in the bind attempt.
    It is sometimes easier to test connections using a LDAP browser - Apache Directory Studio (see http://directory.apache.org/studio/) is one I use.  You can then check user name and password combination outside EDQ.
    You can also get additional server logging on LDAP interactions in EDQ by adding the line:
    userauth.level = all
    to the logging.properties file in the EDQ config directory.  Then where will be lots of diagnostics in the EDQ main0,log file.
    By the way, there is some documentation for this in the on-line help for EDQ.
    Richard

  • How u configure LDAP with UME

    how

    Hi Pawan,
    Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
    Novell  eDirectory  8.8 as UME Data Source for EP : Part I
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken] [original link is broken]
    Also if you are looking for NTLM with LDAP this can be a helpful
    Windows Integrated Authentication via Kerberos on an LDAP data source
    Regards,
    Vishal
    PS: Reward points for helpful answer.

  • How do I use LDAP with iMQ 2.0?

    I am looking for an example to see how to use LDAP with iMQ 2.0.
    I was able to set up the config settings to access a local LDAP,
    but iMQ authentication still rejects valid logins.
    Let me know if I can find more info someplace.

    You can also find an example I put togther in the Sun One knowledge base.
    If you go here:
    http://knowledgebase.iplanet.com/NASApp/ikb/index.jsp
    Search for article 7772
    Alternatively here is the direct link
    http://knowledgebase.iplanet.com/ikb/kb/articles/7772.html

  • ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

    Hi,
    we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
    Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
    My question is:
    We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
    It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
    Best regards,
    Steven

    Hi Abhishek,
      This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna  maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
    Thanks in advance.
    Regards,
    Arunmozhi.

  • Problem in starting Integration service with DAC 11g

    Hi friends,
    Im @ the step of registering integration service and the repository service in DAC 11g. I can start the Repository service well in DAC, but facing issue in starting integration service with DAC, while trying to test connection im getting a message like
    Failure connecting to BIA_IS!
    Im not sure the reason to this problem in DAC. I have also setted the necessary environment variables like INFA_HOME and INFA_DOMAINS_FILE referring the domains.infa file like
    INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa
    Also checked with the dac_env file which has the below contents
    REM -----------------------------------------------------
    REM
    REM ENVIRONMENT VARIABLES THAT YOU MAY NEED TO SET FOR
    REM  PROPER INFORMATICA 8.x or 9.x HANDSHAKE.
    REM
    REM INFORMATICA_SERVER_LOCATION denotes installation of
    REM Informatica components. Example:
    REM C:\Informatica\PowerCenter9.1
    REM
    REM DOMAINS.INFA_FILE_LOCATION denotes the location
    REM (including name) of domains.infa file
    REM
    REM Please make sure to set correct values for variables
    REM mentioned above
    REM
    REM -----------------------------------------------------
    set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0"
    set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa
    set INFA_CMD_STYLE=8
    set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
    set INFA_DOMAINS_FILE=%DOMAINS_INFA_FILE_LOCATION%
    What could be the problem and where to check with the logfile related to the integration service failure in DAC.
    Thanks in advance.
    Regards,
    Saro

    Hi guys,
    The issue is sorted out. The below are the two precautions to be considered.
    *) Make sure of INFA_HOME/Server/bin exist @ the end in the PATH variable.
    *) For each and every change in the PATH variable, it is better to restart the services(both infa and DAC) then and there for the changes to take effect.
    Regards,
    Saro

  • Integrating FTP with JDeveloper

    Can anyone help me with integrating FTP with JDeveloper (10.1.3)
    I am developing jsp pages for a web site. the website runs on a Sun Solaris UNIX server.
    At present i develop my jsp pages in JDeveloper and save then to a file on my PC. I then have to use an external tool (Ultraedit) to FTP them to my webserver for testing.
    I have seen in this forum that there is something called 'ant' which will allow you to FTP direct from JDeveloper. I know zero about 'ant' and after spending a couple of hours trawling arround the web i'm still no wiser.
    Can someone give me a hands held, idiot friendly explanation of what i have to do to integrate FTP?
    john

    Here is a basic explanation of the FTP task in ANT.
    You can just create a new Ant build file in your project, add this task with the correct parameters and then right-click run on the build file.
    Another options is to use JDeveloper to create standard WAR file for deployment and then passing it to the server to deploy.

  • Integrating Apex with Cocoon (does it make pdf from taking data from DB)

    Friends,
    I integrated Apex with appache with cocoon. Its working fine with reports but i want it to work with form on a table or view.The steps below which i have followed for integrating Apex with Cocoon
    Steps of pdf Printing of Report with cocoon:
    1) Download and unzip the following needed files in D:\Apex_fop directory.
    2) Open your command prompt .
    Change the directory to D:\Apex_fop\cocoon-2.1.11.
    Set the Java_Home environment variable as: set JAVA_HOME= C:\Program Files\Java\jdk1.5.0_21
    then type build war
    3) After getting the prompt back as D:>Apex_fop>cocoon-2.1.11>
    Copy coocon.war file from the folder D:\Apex_fop\cocoon-2.1.11\build\cocoon.
    Paste this file into webapps subdirectory in main tomcat directory having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps.....place it in the top
    level of webapps directory.
    4) Now just startup tomcat as D:>APEX_FOP>apache-tomcat-6.0.26>bin>startup.bat
    The cocoon.war file will automatically uncompressed as directory.
    5) To change the port of apache tomcat , edit apache-tomcat-6.0.26\conf\server.xml & change port attribute of Connector element from 8080 to 8181.
    Just check whether Tomcat is running or not as http://localhost:8181/
    & to check cocoon type http://localhost:8181/cocoon/
    6) Now copy fop_post directory & paste it undes new cocoon directory in webapps having path as D:\APEX_FOP\apache-tomcat-6.0.26\webapps
    \cocoon.
    7) Now you need to do some apex settings as follows:
    In APEX, just log in as ADMIN into apex/apex_admin and went to Instance Settings and did the following:
    - Print Serverr: Standard Support
    - Print Server Protocol: HTTP
    - Print Server Host Address:localhost
    - Print Server Port: 8181
    - Print Server Script: /cocoon/fop_post
    In your APEX application, in the Regions section, Click on the Print link next to your report and do the following settings:
    - Enable Report Printing: Yes
    - Link Label: Print
    - Response Header: Report Settings
    - View File As: Attachment
    - Output Format: PDF
    - Report Layout: Default Report Layout
    - Print URL: f?p=&APP_ID.:1:&SESSION.:FLOW_XMLP_OUTPUT_R1063230002781575
    8) Open up the Report Page and click Print , You will get the pdf report.
    But my requirement is bit different. I have made form on a table or view , so when i am submitting my form the record is getting updated in my database and at the same time a new button is appearing at same page as i have branched it in same page. The new button name is print. I want when i click this print button it should print the record which submitted recently. How can i enable the print functionality on form. Its simple in report but how can it be done on form?
    Looking forward for this to know wthr it is achievable or not and if yes what all are the ways?
    Thanks in advance for all who is going to post here and to them also who is giving their time in reading my thread
    Regards
    Adi
    Edited by: Adi's on Mar 23, 2010 8:54 PM
    Edited by: Adi's on Mar 23, 2010 8:54 PM

    You could redirect to a report page instead of to the form page. Then simply print the report.
    This makes sense. You would have one page for entering the data and another page for displaying and printing it.

  • Problem in integrating xMII with VC

    hi Experts,
    My xMII server Version is <b>11.5</b>
    I followed this document:
    <b>https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033</b> for integrating xMII with VC.
    Connection URL: http://<myXMIIServerName>/Lighthammer/ALL_TEMPLATES?version=<b>11.5</b>&trace=true
    Driver Class Name: <b>com.sap.xmii.custom.integration.jdbc.SAPxMIIJDBCDriver</b>
    System Alias: <b>XMII_JDBC</b>
    Connection test is <b>successful</b>, after configured System.
    I am getting error while <b>FindData Seach</b> in VC,
    Inputs given are,
    System: XMII_JDBC (this is my system)
    Look for: Look for a table
    the error is, <b>Error-2305 Cannot retrive catalogs and schemas; check the connection to the selected systems Cannot access JDBC metadata </b>
    I think i made mistake in connectionURL, but connection test is successful.
    Please guide me, where i made mistake.
    Points will be Awarded.
    Thanks & Regards,
    Chinnadurai R

    Hi Sam,
    Thanks for your reply... I am also think that i made mistake in comnnection URL ,
    I have created some querys under Samples/Reports,
    I gave like this::
    <b>http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?version=11.5&trace=true</b> and  <b>http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?</b>
    and then like this
    <b>http://<myXMIIServerName>/Lighthammer/Illuminator/Templates/Samples/Reports?version=11.5&trace=true</b>
    I tried using all the URL  shown above, but it is not listing the Querys in VC .
    Can u guide me how can i form that Connection URL ..
    Thanks & Regards,
    Chinnadurai R

  • Integrating Apache with Tomcat?

    Anyone have a guide to integrating Apache with Tomcat using mod_jk?
    I followed some guides online, but they all seem really dated with some obscure references. This seems like it should be on the top of the list....

    Hi Alan.
    I've discovered the exact same problem.... 0.0.0.0 instead of 127.0.0.1
    You've obviously not had any replys here, but di you end up working it out on your own?

Maybe you are looking for