Integrating Trex search With Solution manager

HI Guys,
Please help me with this .
Let's say the solution manager is integrated in the SAP Portal and trex is available in the SAP portal.
Can we search documents stored in the solution manager via the trex which is integrated in the SAP Portal? Is there a how-to guide available on the config?
Any thoughts are appreciated.
Dev.

Hi Dev
I'm facing a similar problem.
We have a trex server. We connected the TRex to our EP KM. Fulltext search in our Portal KM works well.
We have several project documentations on our Solution Manager. I was hoping I could connect the KM repository of the solution manager to our TREX and search the docs from EP. I was able to connect the Solution Manager repository to Trex. The index is working well.
The procedure is described in note 750623 but unfortunately  the note is far away from a how to guide so I hope this helps:
Trex:
- Go to Admin Tool. Then landscape - connectivity and click on create "Connection". Enter system information of your solution manager system. Then click on Create - RFC Destination (sm59).
Solution Manager:
- Transaction srmo: Create a new Search Server Relation (DRFUZZY) and enter the RFC Destination you created in the above step and set it to default.
- Transaction spro: SAP Solution Manager - Cross-Scenario Settings - Document Management - Servers - Connect Index Server for Full Text Search.   Click on "Define Index Readiness" and mark both entries for "IWBSolar" and save.
- Now go tou se38 and start the report RSTIRIDX_REINDEX. Here enter IWBSOlAR for document area and execute.
- Now go back to spro: Start the IMG activity "Schedule Asynchronous Indexing and De-indexing" and schedule the indexing job (Make sure you have executed the report RSTIRIDX_REINDEX before).
If you want to test the search go to transaction SKPR07, go to tools, select document area IWB Solar and click on "test search".
Unfortunately I don't know if there is any bether transaction for the search.
I was looking for a possibility to search from EP directly to the solman KM.  But unfortunately I didnt' find a solution for this. The only way I know is to connect the solution manager over a transaction iview im EP.
Hope I could help.
Marco

Similar Messages

  • Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

    Hi,
    I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
    Using qtp in integrated mode worked previously on the solution manager 7.1 system.  Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
    I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
    Sincerely,
    David
    Edited by: David Snyman on Mar 2, 2012 7:38 AM

    Hi Sida,
    Can you check SapLogon.ini file maintaining below location please.
    let me know it resolve the isse, can you forward your details to <email removed by moderator>
    looking forward your response.
    Regards
    Naveen
    File Location
    Use
    C:\Windows\saplogon.ini
    Enable QTP to identify the Solution
      Manager Server
    C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
    Auto log on to SAP Systems for testing
    C:\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      64 Bit OS
    C:\Program Files
      (x86)\SAP\FrontEnd\SAPgui\saplogon.ini
    Set Record and Run settings in QTP for
      32 Bit OS
    Message was edited by: Manish Kumar

  • SAP CPS Redwood integration with Solution Manager 7.1 SP8

    Hi experts,
    I need your help..!!
    We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
    Regards
    Zohaib

    hi,
    dont have any explicit step by step doc for CPS integration
    but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
    some more on SAP Central Process Scheduling by Redwood (CPS)
    Thanks
    Jansi

  • Integrating EP 6.0 with Solution Manager 3.2 .

    Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
    It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
    Regards,
    Ashish .A. Poojary

    Ashish,
    What is your requirement?
    Could you be more specific about the area your exploring
    Solution manager is huge...
    Please assign pts if it helps

  • BCP Microsoft Platform integration with Solution Manager

    Hi
    Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
    If so how?  Is there documentation available explaining the process?

    Hi Johan,
    There is some level of integration available with Solution Manager.  To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
    You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
    Thanks.

  • Help Needed: HP QTP/UFT integration with Solution Manager

    Hi Experts,
    We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
    Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
    Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
    Detailed steps for replicating the issue:
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    2.     Open Unified Functional Testing (UFT) 12.00
    3.     Click File -> New -> Test
    4.     Type even a dummy script in the Action window
    5.     Save Test Script by clicking File -> Save <test name> As…
    6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
    7.     Error Message appears
    Note:
    One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
    I am asked if I want to overwrite existing test in Solution Manager.

    Hi,
    I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
    Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
    Error:
    Message
    SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
    Connect_PM  GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       partner <IP>:3300' not reached
    TIME        Tue Jan 19 12:02:17 201
    RELEASE     710
    COMPONENT   NI (network interface)
    VERSION     39
    RC          -10
    MODULE      nixxi.cpp
    LINE        3286
    DETAIL      NiPConnect2: 192.12.353.12:3302
    SYSTEM CALL connect
    ERRNO       10060
    ERRNO TEXT  WSAETIMEDOUT: Connection timed out
    COUNTER     1
    Could you please guide?
    Regards,
    Raichand

  • MDM Integration with Solution Manager

    Hi Gurus,
    Can any one explain me the process to Integrate MDM 7.1 with Solution Manager?
    Thanks,
    Anil

    Hi Anil,
    documentation is generally available on [Service Market Place|http://service.sap.com/installmdm71]. You might find the How-to Guide Configure the MDM Administration Cockpit helpful.
    Best regards
    Michael

  • BMC Control M integration with Solution Manager

    Hi
    I have some question:
    Is it possible to integrate BMC Control M with Solution manager?
    Is SAP have plugin or we need to develop?
    If we integrate then what is the benefit?
    Please guide me.
    Thanks
    Dee

    As Matues has provided that BCM Control-M is a supported job scheduling tool
    Further to answer your question SAP Note  499040  explains that XBP interface is required for external job scheduling tools
    You will find several documents that describe the XBP interface in detail at
    http://www.sdn.sap.com/irj/sdn/nw-scheduling.
    So you will need to use this interface to use the external job scheduling tool
    Regards,
    Paul

  • Big Problem With Solution Manager EHP1 ?

    Dear all,
    I have already installed SAP Solution Manager EHP1, after the installation sucessfuly. I check the function: Project Administration ( T code : Solar_Project_Admin), then select New project button.
    The program inform that:
    "Runtime Errors: Message Type Unknow
    What happened:
    Error in ABAP Application program
    The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated because
    it has come across a statement that unfortunately cannot be excuted.
    etc
    Do you know about this problem, what is the errors ?
    Thanks all.

    Dear all.
    With Solution Manager EHP1
    SAP Basis: SAPKB7001-SAPKB70016, SAPKB70101-SAPKB70102
    SAP ABA: SAPKA7001-SAPK70016, SAPKA70101-SAPKA70102
    Detail log as below:
    Runtime Errors         MESSAGE_TYPE_UNKNOWN
    Date and Time          28.04.2009 16:47:15
    Short text
    Message type " " is unknown.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
    because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    Only message types A, E, I, W, S, and X are allowed.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLSPROJECT_SYSTEM_LANDSCAPE" or "LSPROJECT_SYSTEM_LANDSCAPEU28"
    "SPROJECT_SYSL_CHECK_CENTRAL_SY"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" - in
    "SPROJECT_SYSL_CHECK_CENTRAL_SY".
    The main program was "SAPLS_IMG_TOOL_5 ".
    In the source code you have the termination point in line 29
    of the (Include) program "LSPROJECT_SYSTEM_LANDSCAPEU28".

  • Transport Management System with Solution Manager

    Dear all,
    Do you know the function transport management system(TMS) with solution manager, I already search in SAP document but not found this function.
    Do you know how to config solution manager for TMS and documents related with this function please guide for me!
    Thanks all very much !

    Hi,
    Check this link.
    https://websmp103.sap-ag.de/~sapdownload/011000358700000508502008E/ChangeRequestManagement.pdf
    Hope this answers your questions.
    Feel free to revert back.
    -=-Ragu

  • SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

    Hi,
    Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
    Also system is not showing any data in Introscope Dashboard. Any guess for this?
    Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
    Still no data and still in SMD Agent logs saposcol service warning is there.
    Thanks & Regards,
    Manish Singh

    Hi Jansi,
    Thanks for the reply..
    Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
    Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
    [EXCEPTION]
    com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
    at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
    at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
    at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
    at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
    at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
    at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
    at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
    at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
    at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
    ... 25 more
    Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
    [EXCEPTION]
    com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
    at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
    at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
    at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
    at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
    at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
    at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
    at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
    at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
    at java.lang.Thread.run(Thread.java:664)
    Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
    This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 1552388) is already running .....
    Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
    [EXCEPTION]
    java.lang.NullPointerException:
    at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
    at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
    at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
    at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
    at java.lang.Thread.run(Thread.java:664)
    Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
    Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
    We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
    Any ides or help steps to do that?
    Thanks,
    Manish Singh

  • How to setup CCMS with Solution Manager

    Hi, All
    My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
    Is that RFC connection using both sites, trusted and satellite system ?
    I would like to setup CCMS alerts through Solution manager and R/3 ccms
    please anyone has some guide or URL or any idea send me
    We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
    Thanks in advanced
    J
    Edited by: issue2008 on Sep 19, 2008 12:13 PM

    you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

  • Problem starting with solution manager

    hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes.  After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
    These are some errors that I can find in workdir
    Tue Jan 27 15:08:51 2009
    ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
    t.c    473]
    ***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c  9618]
    ERROR => ErrTrace: no error info available [err_mt.c     1507]
    Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
    no SAP ErrInfo available
    >TS> Tue Jan 27 15:10:51 2009
    T:4398099755584 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
    no SAP ErrInfo available
    System is a Suse/Linux  ppc64, with MaxDB as database
    Please help me!!
    hi guy, i have a problem with Solution Manager version 4.0 During an istallation of support package I had a network problem and the system went down fore some minutes.  After that, is not possible logon on system. I try startsap and is ok, db seem up but is not possible connect by sapgui.
    These are some errors that I can find in workdir
    Tue Jan 27 15:08:51 2009
    ERROR => GwIConnect: GwRead to SAPSM01 / 3301 failed, rc: NIETIMEOUT [gwxx_m
    t.c    473]
    ***LOG S90=> SAP_CMREGTP2, GwIConnect ( 223) [r3cpic_mt.c  9618]
    ERROR => ErrTrace: no error info available [err_mt.c     1507]
    Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
    no SAP ErrInfo available
    >TS> Tue Jan 27 15:10:51 2009
    T:4398099755584 ======> Connect to SAP gateway failed
    Connect_PM  TPNAME=IGS.SM1, GWHOST=SAPSM01, GWSERV=3301
    no SAP ErrInfo available
    System is a Suse/Linux  ppc64, with MaxDB as database
    Please help me!!

    hi,
    there is anyone who can help me?
    Many Thanks
    Fabrizio

  • SAP NW 7.4 as java system sync with solution manager system 7.1 issue

    Dear all,
    I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7.
    For manula downlowd( directly from service market place) is difficult for java system and i have started sysnc with solution manager system to download patches through MOPZ.
    Below are the activities completed:
    1) Through template installed I have rgeisterd the system into Solman SLD.
    2) Sync completed succfully exact product version is shwoing in solman SLD
    3) after that I have checked in SMSY and LMDB its showing prefectly
    4) But in SMSY its shwoing only under technical system,not showing product systems
    5) I have assigned in product system in LMDB
    Now the issues while selecting the system group and logical componensts I have created one logical componnets -but in that SAP NW 7.4 is not showing and I have assumed SAP NW 7.3 EHP1 after creating my newly create dsystem is not shwoing in drop down.
    I ma getting belwo error.
    No system found for this product/product instance
    Message no. SOLAR_SPROJECT110
    Please sugegst how to reslove the error ,and a;lso please let me know is there any way to download latest pathces to dpownload from service market place .
    Advance Thanks

    Hi,
    re-check if the 7.4 system is correctly registered in the solman SLD system.
    Re-check LMDB definition for your 7.4 as JAVA system. you have to manually created the Product system. Ensure all the Component and definitions are correct.
    Also do a verrification run within the LMDB. This will confirm whether all the information is correctly defined.
    Please note - SLD -> LMDB -> SMSY.
    So, if the first 2 don't have the correct information, you wont have much joy with smsy.
    Rgds
    Deepak

  • Evaluation system with Solution manager

    has anyone added an evalaution system where a user who logged a support message can evaluate the Solution given, with Solution manager. Basically the same thing like SAP have. When you close a call you have to rank the messageeg in regards of qaulity of answer etc etc..,
    Anyone that might have any ideas how to do this, could you please give me some direction to how I can implement an evaluation system.
    I thought of having a URL added to confirmation message, where the user can click on to take him to some area where he could evalaute the message. This systems is then linked to Solution  manager so that I can report on these messages and the evealuation received for these support answers.
    I will appreciate any feedback and  any ideas would be most welcome to help me to get to a method of implementing such a evaluation system or developing such a system.

    Dear Johan,
    Firstly the kind of scenario that you are trying to implement is not possible via the standard configuration of Support Desk.
    What I can think of is probably creating an action while closing the message which generates a form for the user to be filled and saves the values into an custom table for questions based on evaluation of the solution.
    Later you can generate reports based on this table.
    Regards
    Amit

Maybe you are looking for