Integration steps with MM and SD in Parallel Ledger

Hello Experts,
What are all the integration configuration steps between FI and MM / SD for updating the logistic transaction under Non-Leading Ledger?
Also, guide me does the material ledger works for Non-Leading ledger transactions?
Regards
Anilkumar

Please note that non-leading ledgers will just have General Leder postings; they cannot have any sub-ledger postings.  So your FI integration with SD/MM will be only at the leading ledger level.
I do not know about material ledger, but again your non-leading ledger does not have sub-ledger, so you cannot post to a material in a non-leading ledger; all your non-leading ledger postings are at the general ledger level.

Similar Messages

  • What are the integration points with sd and qm

    hi,
    sap gurus,
    good morning to all,
    what are the integration points with SD and QM.
    in r/3.
    regards,
    balaji.t
    09990019711

    Dear balaji
    Before doing PGI, there will be a preinspection stage where SD will have to integrate with QM.  Similarly after sales, whenever there is sales returns, QM will come into picture.
    To control the above scenarios, in material master, go to "Quality management" view and click on "Insp.setup" where you need to assign Inspection Types like 04, 06 etc.
    thanks
    G. Lakshmipathi

  • What are the integration points with sd and pm

    hi,
    sap gurus,
    good morning to all,
    what are the integration points SD and PLANT MAINTAINCE.
    REARDS,
    balaji.t
    09990019711

    Balji,
    There is no major integration b/w SD and PM.
    But PM is integrated with CS for all service and repair orders.,
    If you really want to see where they can be ssen integrated
    Eg:
    Pm deifines the roles for the people in shopfloor,if you can make use of these roles and give authorization of removal of credit block to them then it is integrated.
    Even when a new machine is purchased or repaired or overhauled the amount is passed to repective cost center internally.
    regards

  • Integrating EBS12 with OID and Oracle Single Sign-On

    Hi All,
    I recently installed EBS12 and followed all the instructions on metalink note 376811.1 to integrate it with OID and OSSO server.
    At the end of integration to verify SSO integration with EBS12, when I access EBS login page via http://[host]:[port]/OA_HTML/AppsLogin, the following error message is displayed:
    << Start of Error Message>>
    500 Internal Server Error
    java.lang.NoClassDefFoundError
    at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:120)
    at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:161)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    << End of Error Message>>
    Please let me know what can be the cause of this error?
    Thanks,
    Shyam

    PLease use NOTE.249669.1 How To Collect Apache and Jserv Debugging Details
    You will collect more informations.

  • S/C proceedure step by step with CIN and w/o cin

    Hi
    Please provide the step by step procedure of S/C with CIN and w/o CIN.what are the accounts it hit during GR and IR.
    Suppose if out of mat 10 qty 2  gets rejected .what is the procedure and how to make the subsequest adjustments.
    regards,
    Ravi

    Hi
    Please provide the step by step procedure of S/C with CIN and w/o CIN.what are the accounts it hit during GR and IR.
    Suppose if out of mat 10 qty 2  gets rejected .what is the procedure and how to make the subsequest adjustments.
    regards,
    Ravi

  • Oracle11g RAC with partitioning and cross instance parallel query problem

    I have set up a 300gb TPC-H database using a 4 node RAC environment (8 cpu per node, 16 GB memory, 2 GHz processors) the system is served by 2.5 terabytes of SSD for its IO subsystem managed by a combination of ASM and OCFS2.
    When I run a large parallel query (number 9 in the TPCH query set) I get:
    ORA-00600: internal error code, arguments [kxfrGraDistNum3],[65535],[4]
    with all other arguments blank. There were some reports of this in version 9, but it was supposedly fixed. Has any one seen this behavior or have a work around?
    Mike

    Good Idea! Why didn't I think of that? Oh yea...I did. Unfortunately TMS CSI is an update only partner type CSI so I cannot submit a SR. The 600 lookup was how I found the old stuff, but it didn't have any 11g references. I hoped maybe someone in the community had encountered this and had a workaround. By the way, the querey looks like so:
    select
    nation,
    o_year,
    sum(amount) as sum_profit
    from
    select
    n_name as nation,
    extract(year from o_orderdate) as o_year,
    l_extendedprice * (1 - l_discount) - ps_supplycost * l_quantity as amount
    from
    h_part,
    h_supplier,
    h_lineitem,
    h_partsupp,
    h_order,
    h_nation
    where
    s_suppkey = l_suppkey
    and ps_suppkey = l_suppkey
    and ps_partkey = l_partkey
    and p_partkey = l_partkey
    and o_orderkey = l_orderkey
    and s_nationkey = n_nationkey
    and p_name like '%spring%'
    ) as profit
    group by
    nation,
    o_year
    order by
    nation,
    o_year desc;
    the other 21 queries, all using the same tables and degrees of paralell and cross instance settings, executed ok.
    Mike

  • Build a product, step by step with visuals and updated price?

    Hello all,
    What I'm looking for has probably been covered but I cannot find it in a search because it's akward to describe. It is also possible that what I'm looking for is more of a javascript than flash...but since I'm more familiar with Flash I wanted to start here. I'm hoping to find some sort of a program or generator (willing to pay) that will build a product on the screen based on sub-categories that a customer would choose. Idealy, the following would take place.
    The customer would see a blank base product on the screen
    They would select the color (color would fill the product in the picture)
    They would select additions to be added to the product and those additions would appear as selected.
    The price would update itself with each selection or extra added to the product build
    They could proceed to checkout from there.
    Here is an example (we're not selling shoes) that I believe is more detailed than what we need...but the process is similar. Time is an issue and we have a good understanding of flash design but none of us are advanced or professional actionscripters. Is there a program out there for purchase (if not freeware.....wishful thinking?.) that could give us a template to use for something like this?
    http://shop.vans.com/catalog/Vans/en_US/category/custom-shoes.html#/selectGenderAndSize
    Any help is greatly appreciated.
    Thanks!
    Jay

    i would code that all on one frame using library movieclips to create the visual display.
    the associative arrays would be used to store data about the next part to be selected given the current state of the construction.
    it's pretty hard to be more specific with such a general topic other than saying, i suspect, you will need to hire someone to do this for you.

  • How to Use Step with Filters in Eclipse

    Hello, everyone!
    I have a question. How do I keep myself from accessing methods outside my own class? See, when I use the debug feature of Eclipse, (I am using Eclipse 3.0), and start debugging, I often "Step Into" methods of classes like String.class and the like. Doing so produces errors that I need to click on to for numerous times! =( It hinders me from doing what I want to do. Can anyone help me? How do I prevent Eclipse from doing that again? After all, my only concern is seeing the methods I wrote in action, and I don't really want to bother with the ones already defined in Java (like Integer.Class and such).
    I also did a search on google, but the sites that turned up are only those that say Use Step with Filters, and nothing specific (most of them are copy-pastes, so different sites end up saying exactly the same thing ). I did that already, and the same thing happens. What do I have to do in
    Window->Preferences->Java->Debug? Do I have to add packages, classes or filters? If so, how should I do it?
    Sorry for the long entry, but I'm getting frustrated with clicking on the errors... I hope someone can help me. =)
    Thanks in advance! =D

    Go to Window-Preferences-Java-Debug-Step Filtering. When the dialog opens, press F1 for help. Good luck!

  • Comparison parallel ledger app. with parallel account app. in terms of IFRS

    Hİ ALL,
    we would like to know what is the advantages of using parallel ledger approach for transition to IFRS in SAP instead of using parallel account approach?
    thanks in advance

    Hi,
    Currently I am making a similar review - account based versus parallel ledger. The pro's of the of parallel ledger are the con's of account based and vice versa:
    Parallel ledger - Pros
    - G/L accounts: fewer G/L accounts required (so opportunity to reduce SCOA), same G/L accounts are shared across all ledgers - unified reporting
    - Fiscal year variant: company codes with different fiscal year variants assigned to a separate ledger, facilitating consolidated reporting
    - Posting period variant: postings to ledgers can be separately controlled by assigning a separate posting period variant for the ledger
    - Carry forward: no need to maintain separate retained earnings accounts per accounting principle
    - Currency valuations and translations: Automated postings updated to appropriate ledgers based on the assignment to relevant accounting principles
    - Adjustment and value postings: Adjustment and value postings, such as reclassification are automatically posted to the appropriate ledgers
    - Standard reports: standard reports are executed by ledger
    Parallel ledger - Cons
    - The data volume could increase as a result ofmaintaining parallel ledgers (see SAP note 820495 for tips on resolving the issue)
    - Parallel ledger is a new concept at my customer so it requires a complete revamp of system configuation, with all the impact on processes and people, all old local reports (using special ledger) will become obsolete.
    Hope this helps. By the way: we have chosen to move from account-based to parallel ledger despite the implementation effort.
    Best regards,
    Alexander Min

  • CO Postings to Parallel Ledger

    We are on ECC 6.0 and when we make an entry in SAP to Z2 and Z3 ledger(Z2 and Z3 are parallel ledger and 0L is leading ledger) without any CO object, the system does not issue ant message: KI 235 is issued ("Account & requires a cost accounting-relevant account assignment") or KI 351?
    Could you please advice and help further on this?
    Regards
    Aaashish Kedia

    Hi,
    Thanks for this SAP Note.It has helped me understand the issue.
    I have also found some additoonal SAP Notes for users to Trasfer data from parallel Ledger to CO in case it is required:
    804753
    932045
    Regards
    Aashish Kedia

  • Any kind of integration experience with Weblogic JMS and Oracle AQ?

    Hi,
    In my company I work with java developers who believe in some kind of "holly" database independence I don't understand and as a result my life as a database developer is hell on earth.. Yesterday we again started to discuss, this time where to log, they believe database is slow and prefer logging to filesystem, after some hours finally I could convince them for some operational and reporting needs to use the database and will do this in an asyncronous way whiich they won't get slow. After all I believe the reason for a database is data, this is the place where data lives, and with the correct desing and implementation logging to database would perform better.
    I love Oracle features, and know that we paid a lot for this software, so today I started investigating this promised solution. And quickly I found AQ and JMS topics in the documentation :)
    After this introduction here is my problem; my company use BEA Weblogic as application server and the java guys want AQ to automatically (but of course with some delay) take their JMS log requests into database tables. Does any one have similar application experience, or any kind of integration experience with Weblogic JMS and Oracle AQ?
    Any comments, references, documentation, sample code, url will be most welcomed :)
    Thank you very much!
    Tonguc
    [email protected]
    References I found upto now;
    Oracle® Streams Advanced Queuing Java API Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14291/toc.htm
    (Packages; javax.jms & oracle.jms)
    Oracle® Streams Advanced Queuing User's Guide and Reference 10g Release 2 (10.2) http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14257/toc.htm
    Part IV
    Using Oracle JMS and Oracle Streams AQPart V describes how to use Oracle JMS and Oracle Streams Advanced Queuing (AQ).
    Chapter 11, "Introducing Oracle JMS"
    Chapter 12, "Oracle JMS Basic Operations"
    Chapter 13, "Oracle JMS Point-to-Point"
    Chapter 14, "Oracle JMS Publish/Subscribe"
    Chapter 15, "Oracle JMS Shared Interfaces"
    Chapter 16, "Oracle JMS Types Examples"
    A Sample Code from Otn
    http://www.oracle.com/technology/sample_code/tech/java/web_services/jmsws/NewsQueueEJB.java.html

    I wouldn't go as far to say Oracle AQ is out-dated today. However, it is indeed a proprietary technology that did not found much main-stream adoption in the earlier years after its introduction. The advent of JMS made it somewhat more useful (or should I say intriguing, because more people are trying to tie it together with other J2EE technologies), but the Oracle's JMS wrapper classes in aqapi.jar were not feature complete for a long while, so using it outside Oracle's application server was painful, if not impossible. I do agree that the info at the dev2dev's JMS newsgroup or in this forum is highly fragmented, as neither Oracle nor BEA provides an official solution to integrate AQ with WebLogic, so people like us have to learn the technology through experimentation and in a piecemeal fashion.
    3 years ago I was literally "playing around" - we had a polling mechanism set up to use triggers to write Oracle data changes into an event table, and had a Java-based daemon to scan that table and publish events as JMS messages to the WebLogic JMS server. This continues to work reliably till today, but I was looking for a solution that has few parts - I wanted to hook up my WebLogic MDB directly to AQ as a foreign JMS provider. Although I was able to get it to work (including XA), there were a few hoops I had to jump through, such as decompiling the Oracle AQjms classes to make them bind to the WebLogic JNDI tree.
    One year after that Diptanshu Parui took what I did a giant step further - he extended the Oracle AQjms classes to allow them to be bound to the WebLogic JNDI tree naturally, and he figured out how to use WebLogic JMS messging bridge to re-send single-threaded AQ JMS messages to clustered JMS queues, which allow concurrent message assumption by multiple instances of MDB's. My impression is that he is using that setup in a production environment.
    I am sure you are aware of it but I would like to make it clear - in order to use AQ as a foreign JMS provider to WebLogic-hosted MDB's, you don't need to update your database to Oracle 10g - Oracle 8i is good enough (although I recommend at least 9i Release 2). It is not the database engine, but rather the aqapi.jar JMS wrapper on top of AQ that matters. I do recommend that you use aqapi.jar from Oracle Application Server 10.0.3 or up for better XA support, among other things. Again, you don't have to replace WebLogic with Oracle AS - you only need a single jar file from it and put it in your WebLogic's classpath. However, I don't know what this means from a licensing point of view if you ever go to production - do you have to pay the full price of OracleAS or OC4J just to use the aqapi.jar?
    In the coming days I will test the latest aqapi.jar to see how much progress Oracle has made in terms of making their J2EE products more spec-compliant :-).
    Hope the above gives you a different perspective.
    Eric

  • Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

    Hi OHPCPaT Forum,
    Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
    Thanks in anticipation

    Hi,
    Yes all the users are facing the issue. Please find more details for the issue.
    Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
    Quality Center Details:
    HP Application Lifecycle Management 11.00
    ALM patch level: 07
    Quality Center 11.00 Enterprise Edition
    Component     Build
    OTA Client     11.0.0.6051
    User Interface     11.0.0.6051
    WebGate Client     11.0.0.6051
    Test Run Scheduler     11.0.0.6051
    Execution Flow     11.0.0.6051
    Site Administration Client     11.0.0.6051
    Extension Version     
    Enterprise Integration for SAP applications     2.6.0.3232
    Sprinter     11.0.0.6051
    Application Model     2.6.0.917
    Installation Steps followed:-
    1.Installed HP ALM
    2.Installed Patch Service Pack 2 (Patch 2,3,4)
    3.Installed Patch 6
    4.Installed Patch 7
    5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
    6.Created new project in HP ALM
    7.Login to the project (no issue)
    8.Enabled the Project Extensions
    9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
    Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
    Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

  • Problem with yosemite and parallels

    Since I have upgraded to yosemite and parallels 10 my windows 7 has been using a lot of CPU resources.  Windows 7 runs very slow and it been using almost constantly 100% of one of the quads resources.  This just started to happen when I upgraded, because I did not have this problem with Mavericks and Parallels 9 or 10. I have an iMac 2011, 8GB of Ram.  Has anybody had this issue.  Thanks.

    Thanks for the response.  I was searching on a parallels forum website and found the following:
    As from the symptoms, the issue can lie in NVRAM preferences of your particular Mac.
    Please do the following to solve:
    open Terminal application on Mac (Applications/Terminal.app)
    please type this command (you may copy-paste it to the terminal from this message):
    sudo nvram boot-args="debug=0xd4e"
    Hit Enter.
    You will be prompted to enter Mac user password. Please type it and hit Enter.
    Note: you won't see what you are typing, just type and hit Enter. If you don't have Mac user password, please create a temporary one.
    Then you may restart your Mac and the issue should be solved.
    If not - please reply me here and I'll create a ticket for you in Support.
    I did the above and it seemed to correct the problem.

  • Printing from MacBook Pro 17" Mid 2010 running 10.8.2 ... persistent inability for Apple MacBook Pro to print to a variety of HP printers (have run Windows and Ubuntu on Parallels and same printers work) ... what is going on with Apple printer support?

    What is wrong with Apple's support of printers ... inability for MacBook Pros to connect with HP and other printers. Yet the same printers
    work under Mac OS based Parallels (running Windows or Ubuntu) - WHY?  Finger pointing (HP . Apple ... Apple > HP) ... who cares ... FIX IT ... this has gone on for months now. WHAT IS THE PROBLEM?

    HP discontinued support (read: stopped updating their OS X printer drivers) for a lot of their printers back when Apple released Snow Leopard and dropped even more when Lion was released.  This is an HP problem, not an Apple problem.
    Exacty what  printers are you having problems with?
    If any of your printers are on the HPIJS list, try installing the HPIJS drivers (there are 3 files to install, and it won't hurt anything).   This solved the issue for me on Snow Leopard, Lion and Mt. Lion with my older HP printers.

  • Windows Integrated Security with SSRS, Sharepoint 2013 and SSAS over http

    I have the following setup and problem:
    Sharepoint 2013 with SSRS in Sharepoint integrated mode
    SSAS 2012 SP1 with http access (IIS + msmdpump) enabled on the same box as SSAS
    Every component I have tried works fine with this (PerformancePoint, .bism connections, SSIS packages etc.), connecting over http using Kerberos and windows integrated authentication.
    SSRS (.rsds) connections in Sharepoint fail a connection test when using the same http connection string + Windows integrated authentication which works for everything else. The error is: "Unsupported data format: -> Microsoft.ReportingServices.DataExtensions.AdomdTestConnectionException:
    Unsupported data format:"
    SQL server profiler shows that the windows username is reaching the SSAS server is all cases.
    Kerberos delegation is set up for SSAS and is working.
    Switching the .rsds connection to saved credentials (same user as I tried with Windows integrated auth) works fine and SQL server profile logs look the same as the Windows integrated case.
    So, everything seems to work with Kerberos + http apart from SSRS ... any idea welcome. I did read that SSPI is not supported for http connections but then again, there are sites which give examples of exactly such connection strings. I can't find any
    mention of this case or exact problem anywhere ...

    For information, this was fixed by applying the .NET 4.5.1 patch as advised by MS support. Now http connections from integrated mode SSRS work ok.

Maybe you are looking for