Integration with Apache 2.0?

Is it possible to use Sun ONE App Server 7 with the latest Apache HHTP server release?
The Release Notes state that only Apache 1.3 is supported...

It may be possible to use the latest Apache server. But it is not tested. So I would suggest you to use Apache1.3 which is tested and supported.

Similar Messages

  • Integration with Apache on NT

    Hi All,
              I noticed that there is an Apache plugin for WebLogic 5.1, but it is only
              for Apache running on Solaris. Has anyone successfully integrated Apache
              running on NT with WebLogic 5.1 running on NT? Also, has anyone
              successfully integrated Apache running on NT with WebLogic 4.5.1 running on
              NT? If so, how?!?
              Thanks!
              Elaine
              

              Ideally, we would love to do so. However, there are two major reasons why
              we cannot release the source code. These are:
              1 ) supportability: It is very difficult to support our product like
              Weblogic because it is a development platform. It makes for a support
              nightmare on occasions when we are not certain what exact code our customers
              are running. Providing the source code to the proxy plug-ins could make
              solving customer issues very difficult when customers modify the source code
              and recompile.
              2 ) trade secrets: Our company has invested much effort in research and
              development for these plug-ins. Unfortunately, our competitors can easily
              steal away our investment if we provide the source code to our plug-ins
              publicly or distribute them widely.
              There are instances in which we might be able to provide the source code.
              However, we typically do not do it as a policy. You should contact your
              account manager to further discuss the situation.
              Thanks, Michael
              Michael Girdley
              WLS Product Manager
              Stephen Earl <[email protected]> wrote in message
              news:[email protected]...
              > Michael,
              >
              > Is BEA willing to release the source for the proxy plugins to enable
              > developers to enhance their functionality?
              >
              > Steve...
              >
              > "Michael Girdley" <[email protected]> wrote in message
              > news:[email protected]...
              > >
              > >
              > > We currently do not have an Apache plug-in for Windows NT as a high
              > > priority. This is primarily because the Apache version for NT is still
              > > listed as "less stable" then those for other platforms.
              > >
              > > We will be doing ports of the plug-in for other platforms. If you have
              > > questions about which ones those will be, please do contact your account
              > > representative.
              > >
              > > Thanks,
              > >
              > > --
              > > Michael Girdley
              > > WLS Product Manager
              > >
              > >
              > >
              > > Elaine Herren <[email protected]> wrote in message
              > > news:[email protected]...
              > > > Hi All,
              > > >
              > > > I noticed that there is an Apache plugin for WebLogic 5.1, but it is
              > only
              > > > for Apache running on Solaris. Has anyone successfully integrated
              > Apache
              > > > running on NT with WebLogic 5.1 running on NT? Also, has anyone
              > > > successfully integrated Apache running on NT with WebLogic 4.5.1
              running
              > > on
              > > > NT? If so, how?!?
              > > >
              > > > Thanks!
              > > > Elaine
              > > >
              > > >
              > >
              > >
              >
              >
              

  • Integrate Tomcat with apache

    I need a procedure to check my installation of Tomcat 4.0.3 and it¹s
              integration with apache. I was told I need mod_jk, but I can¹t find it even
              in the source files of tomcat. Any word on where I can find it?
              Any procedures and insights would be greatly appreciated, thank you!
              Tim Best
              [att1.html]
              

    I am ttrying integrate tomcat/aoache on my local machine.But i can able to run html files only.No jsp,servlets.can you tell me how did u configure that.

  • Integrating tomcat 5.0.28 with apache web server 2.2

    hi all
    i tried a lot on net but could not get the steps for
    connctivity between tomcat 5.0.28 with apache web server 2.2.
    any one pzl do help me in finding the solution
    pzl do tel me the step by step process for this connectivity
    sus

    hi :-)
    you need jk modules ;-)
    i havent try the integrating the version of apache web
    and tomcat you specify but you can refer to the links below :-)
    gudluck :-)
    http://www.serverwatch.com/tutorials/article.php/2203891
    http://www.onjava.com/lpt/a/2826
    http://raibledesigns.com/tomcat/
    regards,

  • Problem with Apache 2.0.39 & Tomcat 4.0.3

    My existing Apache 2.0.35 was integrated with Tomcat 4.0.3 correctly
    (using mod_webapp.so)
    After upgrading to Apache 2.0.39 (as suggested), Apache no longers
    works.
    ERROR MSG:
    httpd: module "mod_webapp.c" is not compatible with this version of Apache.
    Please contact the vendor for correct version.
    Anyone know how to resolve this?

    Please tell us how you solved it
    /Rassol

  • Weblogic portal integration with lenya

    I need to integrate weblogic portal with apache lenya. Is there any integration instructions?

    Hello,
    First of all let me thank you Brad, for taking the time to answer, it's very nice of you. After I read you post I spent a couple of hours searching for the installer of the recommended "WebLogic Portlets for Groupware Integration". After searching everywhere I could possible search : OTN, E-Delivery, Metalink, ias.us.oracle.com I could not find the installer of this portlets. In the Installation Guide it says : " 2. Download the software from the Oracle Software Downloads site. " - there is nothing related to Portlets for Groupware on OTN.
    Now, I'm ashame but I have to give up, I guess perhaps this portlets for groupware integration are bundeled into some kit with a different name, I don't know, believe me I tried to find them, I searched the documentation but with no luck.
    I would be very thankful if you can point me to the installer of this portlets. Thank you very much again !

  • Integration with OBI

    Hi,
    I need to know the physical query generated by the BI server when integrated with endeca 3.0. ( I believe the QueryStatement.sql file in data-in folder is the logical query).
    The BI URL shows lot of data but the Endeca URL after loading data shows just 7 records! I need to understand how data is being loaded into data domain. Appreciate your help.
    Thanks,
    Anusha

    Bwise,
    I tried different options as you suggested. I gave the Presentation Services URL and Port, but I still don't see any Answers requests. I get the following error at the command prompt where OCJ services started.
    [060107_020256390][][STATEMENT] Global context initialized
    [060107_020256406][][STATEMENT] SawFolderNavigationService: getFolderChildren ca
    lled...
    [060107_020257265][][EXCEPTION] Got exception: (404)Not Found
    07/06/01 14:02:57 AxisFault
    faultCode: {http://xml.apache.org/axis/}HTTP
    faultSubcode:
    faultString: (404)Not Found
    faultActor:
    faultNode:
    faultDetail:
    {}:return code: 404
    &lt;HTML&gt;&lt;HEAD&gt;&lt;TITLE&gt;404 Not Found&lt;/TITLE&gt;&lt;/HEAD&gt;&lt
    ;BODY&gt;&lt;H1&gt;404 Not Found&lt;/H1&gt;Resource /analytics/saw.dll not found
    on this server&lt;/BODY&gt;&lt;/HTML&gt;
    {http://xml.apache.org/axis/}HttpErrorCode:404
    07/06/01 14:02:57 (404)Not Found
    Do you have any other suggestions?
    Thank you,
    Krishna

  • Primavera P6 integration with Oracle UCM

    Hello, is there any documentation on how to integrate primavera with Oracle UCM instead of Apache JackRabbit?
    In Primavera P6 documentation there is only one sentence regarding the problem:
    Primavera default integration is with Apache JackRabbit content repository.
    Primavera with native JCR support:
    •Oracle Universal Content Management
    •Apache Jackrabbit
    •Content Repository Extreme (CRX)
    •Magnolia
    •Object Web eXo Platform
    •Alfresco Document Management
    •...

    After communication with Primavera's team: there is no built in integration in Primavera P6 with UCM through JSR-170.
    There are plans to standardize Primavera's content integration with JSR-170 standards in Primavera 7.
    For more information you have to contact Primavera's support team.

  • Outbound integration with peoplesoft HRMS using a soap adaptor  fails

    We are trying to do outbound integration with peoplesoft HRMS as a part of interface requiremnt,we are using soap adaptor for this,we are getting the following error
    An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message transmission failure, response code: 500 at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1731) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeInputOnlyOperation(WSIFOperation_JaxRpc.java:1156) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:865) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:781) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:801) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1444) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:305) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:153) at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher
    Any clues about this..
    How to add HTTP header on top of the response..
    Thanks,
    Azeem.

    We have this working at our organization and my guess is that this is related to either a missing routing or having no security set on the service operation. We are only exploring this in test but we have the ESB set up as node in Peoplesoft. There is then routing defined from that node to financials. On the service operation we have attached the role PTPT1200. I am sure this is not best practice but we are currently only testing.
    If you want to attach headers for authentication/authorization I am sure it is defined in the documentation although I don't have the link in front of me.

  • OIM 9.1.0 Integration with Active Directory 2008 R2

    Hi,
    My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
    My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
    Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
    Any guidance is really appreciated.
    Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
    Is this a working and supported scenario by OIM v9.1.0 ?

    I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
    -Bikash

  • Service desk integration with 3rd party tool

    Hi all,
    I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
    So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
    The webservice then will be called by the 3rd party tool with corresponding data.
    However, according to spro I need to define a value mapping for incoming/outgoing calls.
    I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
    SAPCategory
    SAPComponent
    SAPDatabase
    SAPFrontend
    SAPIncidentID
    SAPIncidentStatus
    SAPInstNo
    SAPOperatingSystem
    SAPSoftwareComponent
    SAPSoftwareComponentPatch
    SAPSoftwareComponentRelease
    SAPSubject
    SAPSystemClient
    SAPSystemID
    SAPSystemType
    SAPUserStatus
    What about attachments, priority etc.?
    Will the interface parameters mapped to these ones?
    For what purpose do I need to maintain the value mapping?
    Can you give me a hint?
    Regards, Richard Pietsch

    can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

  • Java Stack mandatory for a SAP BI system integrated with EP?

    Hi Guru's,
    Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
    This is integrated with the EP. But our BI system does not contain the Java Stack installed.
    When we work on WAD templates and execute  the template, it is automatically directed to EP portal where we can see our reports.
    Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
    Any info on this is of great help.
    Best Regards
    Kumar

    HI Reddy,
    We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
    As it is integrated with EP which has Java, our web reports are working.
    1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
    2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
    Regards
    Kumar

  • Session keep Alive when EBS is integrated with OIF acting as SP

    We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
    The integration is successful and EBS is able to authenticate using this third party SSO.
    Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
    Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
    To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
    So my question is how we can call this java script for each page load for EBS?
    Thanks & Regards
    Sarbashis

    It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
         302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
         Result: 200. Set-Cookie OAM-ID to expired.
    Form Submits: https://sso.mycompany.com/fed/user/sloosso
    Result: 500 Error
    Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
    If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
    Then I am successfully logged out.
    This seems almost like a bug in OAM...

  • Svn with Apache Timeout issue

    Hello Archers,
    I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
    https://wiki.archlinux.org/index.php/LAMP
    https://wiki.archlinux.org/index.php/Subversion_Setup
    Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
    This is a client error message:
    Commit failed (details follow):
    Unexpected end of svndiff Input
    And this the corresponding server side log:
    [date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
    [date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
    [date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
    I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
    I think I don't have specified the timeouts correctly, since I haven't found the default option.
    tl:dr
    Do you know how to set the timeouts in the apache configuration file?
    I very much appreciate your help.
    arch on pi
    Here are my configuration Files with my position for the timeout order:
    httpd-ssl.conf:
    # This is the Apache server configuration file providing SSL support.
    # It contains the configuration directives to instruct the server how to
    # serve pages over an https connection. For detailed information about these
    # directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Required modules: mod_log_config, mod_setenvif, mod_ssl,
    # socache_shmcb_module (for default value of SSLSessionCache)
    # Pseudo Random Number Generator (PRNG):
    # Configure one or more sources to seed the PRNG of the SSL library.
    # The seed data should be of good random quality.
    # WARNING! On some platforms /dev/random blocks if not enough entropy
    # is available. This means you then cannot use the /dev/random device
    # because it would lead to very long connection times (as long as
    # it requires to make more entropy available). But usually those
    # platforms additionally provide a /dev/urandom device which doesn't
    # block. So, if available, use this one instead. Read the mod_ssl User
    # Manual for more details.
    #SSLRandomSeed startup file:/dev/random 512
    SSLRandomSeed startup file:/dev/urandom 512
    #SSLRandomSeed connect file:/dev/random 512
    SSLRandomSeed connect file:/dev/urandom 512
    # When we also provide SSL we have to listen to the
    # standard HTTP port (see above) and to the HTTPS port
    Listen 443
    ## SSL Global Context
    ## All SSL configuration in this context applies both to
    ## the main server and all SSL-enabled virtual hosts.
    # SSL Cipher Suite:
    # List the ciphers that the client is permitted to negotiate.
    # See the mod_ssl documentation for a complete list.
    SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
    # Speed-optimized SSL Cipher configuration:
    # If speed is your main concern (on busy HTTPS servers e.g.),
    # you might want to force clients to specific, performance
    # optimized ciphers. In this case, prepend those ciphers
    # to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
    # Caveat: by giving precedence to RC4-SHA and AES128-SHA
    # (as in the example below), most connections will no longer
    # have perfect forward secrecy - if the server's key is
    # compromised, captures of past or future traffic must be
    # considered compromised, too.
    #SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
    #SSLHonorCipherOrder on
    # Pass Phrase Dialog:
    # Configure the pass phrase gathering process.
    # The filtering dialog program (`builtin' is an internal
    # terminal dialog) has to provide the pass phrase on stdout.
    SSLPassPhraseDialog builtin
    # Inter-Process Session Cache:
    # Configure the SSL Session Cache: First the mechanism
    # to use and second the expiring timeout (in seconds).
    #SSLSessionCache "dbm:/run/httpd/ssl_scache"
    SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
    SSLSessionCacheTimeout 6000
    ## SSL Virtual Host Context
    <VirtualHost _default_:443>
    # General setup for the virtual host
    DocumentRoot "/mnt/sda1/svn"
    ServerName 192.168.178.48:443
    ServerAdmin [email protected]
    ErrorLog "/var/log/httpd/error_log"
    TransferLog "/var/log/httpd/access_log"
    # SSL Engine Switch:
    # Enable/Disable SSL for this virtual host.
    SSLEngine on
    # Server Certificate:
    # Point SSLCertificateFile at a PEM encoded certificate. If
    # the certificate is encrypted, then you will be prompted for a
    # pass phrase. Note that a kill -HUP will prompt again. Keep
    # in mind that if you have both an RSA and a DSA certificate you
    # can configure both in parallel (to also allow the use of DSA
    # ciphers, etc.)
    # Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
    # require an ECC certificate which can also be configured in
    # parallel.
    SSLCertificateFile "/etc/httpd/conf/server.crt"
    #SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
    #SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
    # Server Private Key:
    # If the key is not combined with the certificate, use this
    # directive to point at the key file. Keep in mind that if
    # you've both a RSA and a DSA private key you can configure
    # both in parallel (to also allow the use of DSA ciphers, etc.)
    # ECC keys, when in use, can also be configured in parallel
    SSLCertificateKeyFile "/etc/httpd/conf/server.key"
    #SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
    #SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
    # Server Certificate Chain:
    # Point SSLCertificateChainFile at a file containing the
    # concatenation of PEM encoded CA certificates which form the
    # certificate chain for the server certificate. Alternatively
    # the referenced file can be the same as SSLCertificateFile
    # when the CA certificates are directly appended to the server
    # certificate for convenience.
    #SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
    # Certificate Authority (CA):
    # Set the CA certificate verification path where to find CA
    # certificates for client authentication or alternatively one
    # huge file containing all of them (file must be PEM encoded)
    # Note: Inside SSLCACertificatePath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
    #SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
    # Certificate Revocation Lists (CRL):
    # Set the CA revocation path where to find CA CRLs for client
    # authentication or alternatively one huge file containing all
    # of them (file must be PEM encoded).
    # The CRL checking mode needs to be configured explicitly
    # through SSLCARevocationCheck (defaults to "none" otherwise).
    # Note: Inside SSLCARevocationPath you need hash symlinks
    # to point to the certificate files. Use the provided
    # Makefile to update the hash symlinks after changes.
    #SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
    #SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
    #SSLCARevocationCheck chain
    # Client Authentication (Type):
    # Client certificate verification type and depth. Types are
    # none, optional, require and optional_no_ca. Depth is a
    # number which specifies how deeply to verify the certificate
    # issuer chain before deciding the certificate is not valid.
    #SSLVerifyClient require
    #SSLVerifyDepth 10
    # TLS-SRP mutual authentication:
    # Enable TLS-SRP and set the path to the OpenSSL SRP verifier
    # file (containing login information for SRP user accounts).
    # Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
    # detailed instructions on creating this file. Example:
    # "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
    #SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
    # Access Control:
    # With SSLRequire you can do per-directory access control based
    # on arbitrary complex boolean expressions containing server
    # variable checks and other lookup directives. The syntax is a
    # mixture between C and Perl. See the mod_ssl documentation
    # for more details.
    #<Location />
    #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
    # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
    # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
    # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
    # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
    # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
    #</Location>
    # SSL Engine Options:
    # Set various options for the SSL engine.
    # o FakeBasicAuth:
    # Translate the client X.509 into a Basic Authorisation. This means that
    # the standard Auth/DBMAuth methods can be used for access control. The
    # user name is the `one line' version of the client's X.509 certificate.
    # Note that no password is obtained from the user. Every entry in the user
    # file needs this password: `xxj31ZMTZzkVA'.
    # o ExportCertData:
    # This exports two additional environment variables: SSL_CLIENT_CERT and
    # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
    # server (always existing) and the client (only existing when client
    # authentication is used). This can be used to import the certificates
    # into CGI scripts.
    # o StdEnvVars:
    # This exports the standard SSL/TLS related `SSL_*' environment variables.
    # Per default this exportation is switched off for performance reasons,
    # because the extraction step is an expensive operation and is usually
    # useless for serving static content. So one usually enables the
    # exportation for CGI and SSI requests only.
    # o StrictRequire:
    # This denies access when "SSLRequireSSL" or "SSLRequire" applied even
    # under a "Satisfy any" situation, i.e. when it applies access is denied
    # and no other module can change it.
    # o OptRenegotiate:
    # This enables optimized SSL connection renegotiation handling when SSL
    # directives are used in per-directory context.
    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
    <FilesMatch "\.(cgi|shtml|phtml|php)$">
    SSLOptions +StdEnvVars
    </FilesMatch>
    <Directory "/srv/http/cgi-bin">
    SSLOptions +StdEnvVars
    </Directory>
    # SSL Protocol Adjustments:
    # The safe and default but still SSL/TLS standard compliant shutdown
    # approach is that mod_ssl sends the close notify alert but doesn't wait for
    # the close notify alert from client. When you need a different shutdown
    # approach you can use one of the following variables:
    # o ssl-unclean-shutdown:
    # This forces an unclean shutdown when the connection is closed, i.e. no
    # SSL close notify alert is sent or allowed to be received. This violates
    # the SSL/TLS standard but is needed for some brain-dead browsers. Use
    # this when you receive I/O errors because of the standard approach where
    # mod_ssl sends the close notify alert.
    # o ssl-accurate-shutdown:
    # This forces an accurate shutdown when the connection is closed, i.e. a
    # SSL close notify alert is send and mod_ssl waits for the close notify
    # alert of the client. This is 100% SSL/TLS standard compliant, but in
    # practice often causes hanging connections with brain-dead browsers. Use
    # this only for browsers where you know that their SSL implementation
    # works correctly.
    # Notice: Most problems of broken clients are also related to the HTTP
    # keep-alive facility, so you usually additionally want to disable
    # keep-alive for those clients, too. Use variable "nokeepalive" for this.
    # Similarly, one has to force some clients to use HTTP/1.0 to workaround
    # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
    # "force-response-1.0" for this.
    BrowserMatch "MSIE [2-5]" \
    nokeepalive ssl-unclean-shutdown \
    downgrade-1.0 force-response-1.0
    # Per-Server Logging:
    # The home of a custom SSL log file. Use this when you want a
    # compact non-error SSL logfile on a virtual host basis.
    CustomLog "/var/log/httpd/ssl_request_log" \
    "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
    #SSLSessionTimeout 5m
    Timeout 600000
    <Location />
    DAV svn
    SVNParentPath /mnt/sda1/svn/repos
    AuthzSVNAccessFile /home/svn/.svn-policy-file
    AuthName "SVN Repositories"
    AuthType Basic
    AuthUserFile /home/svn/.svn-auth-file
    # Satisfy Any
    Require valid-user
    </Location>
    </VirtualHost>
    httpd.conf
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
    # will be interpreted as '/logs/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used. If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    ServerRoot "/etc/httpd"
    Timeout 60000
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    # Mutex default:/run/httpd
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #nach fehlermeldung
    LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #Felhermeldung undefined symbols
    LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #nach Fehlermeldung
    LoadModule cache_socache_module modules/mod_cache_socache.so
    #nochne Fehlermeldung
    LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule echo_module modules/mod_echo.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule data_module modules/mod_data.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule reflector_module modules/mod_reflector.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule charset_lite_module modules/mod_charset_lite.so
    #LoadModule deflate_module modules/mod_deflate.so
    #LoadModule xml2enc_module modules/mod_xml2enc.so
    #LoadModule proxy_html_module modules/mod_proxy_html.so
    LoadModule mime_module modules/mod_mime.so
    #LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule log_forensic_module modules/mod_log_forensic.so
    #LoadModule logio_module modules/mod_logio.so
    #LoadModule lua_module modules/mod_lua.so
    LoadModule env_module modules/mod_env.so
    #LoadModule mime_magic_module modules/mod_mime_magic.so
    #LoadModule cern_meta_module modules/mod_cern_meta.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule ident_module modules/mod_ident.so
    #LoadModule usertrack_module modules/mod_usertrack.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_crypto_module modules/mod_session_crypto.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
    #Fuer die cipher suite
    LoadModule ssl_module modules/mod_ssl.so
    #LoadModule dialup_module modules/mod_dialup.so
    LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule heartbeat_module modules/mod_heartbeat.so
    #LoadModule heartmonitor_module modules/mod_heartmonitor.so
    #1 for svn
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule asis_module modules/mod_asis.so
    #LoadModule info_module modules/mod_info.so
    #LoadModule suexec_module modules/mod_suexec.so
    #LoadModule cgid_module modules/mod_cgid.so
    #LoadModule cgi_module modules/mod_cgi.so
    #2 for svn
    LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule dav_lock_module modules/mod_dav_lock.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule imagemap_module modules/mod_imagemap.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #3 for svn
    LoadModule dav_svn_module modules/mod_dav_svn.so
    LoadModule authz_svn_module modules/mod_authz_svn.so
    <IfModule unixd_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other
    # <Directory> blocks below.
    <Directory />
    AllowOverride none
    Require all denied
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/mnt/sda1"
    #<Directory "/mnt/sda1/svn/repos">
    # # Possible values for the Options directive are "None", "All",
    # # or any combination of:
    # # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # # Note that "MultiViews" must be named *explicitly* --- "Options All"#
    # # doesn't give it to you.
    # # The Options directive is both complicated and important. Please see
    # # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # # for more information.#
    # Options Indexes FollowSymLinks
    # # AllowOverride controls what directives may be placed in .htaccess files.
    # # It can be "All", "None", or any combination of the keywords:
    # # AllowOverride FileInfo AuthConfig Limit
    # AllowOverride None
    # # Controls who can get stuff from this server.
    # Require all granted
    #</Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <Files ".ht*">
    Require all denied
    </Files>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
    </Directory>
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall may be used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #EnableMMAP off
    #EnableSendfile on
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include conf/extra/proxy-html.conf
    </IfModule>
    # Secure (SSL/TLS) connections
    Include /etc/httpd/conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    # uncomment out the below to deal with user agents that deliberately
    # violate open standards by misusing DNT (DNT *must* be a specific
    # end-user choice)
    #<IfModule setenvif_module>
    #BrowserMatch "MSIE 10.0;" bad_DNT
    #</IfModule>
    #<IfModule headers_module>
    #RequestHeader unset DNT env=bad_DNT
    #</IfModule>
    Edit: inserted tl;dr
    Last edited by arch_on_pi (2014-05-18 21:33:24)

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • RE: Legacy Integration with PI/Open

    Greg -
    We are currently working on wrappering the APIs for UniVerse (aka Pick on
    UNIX).
    We received some help from the guys at RTD in Denver.
    We tested out a C program that uses the Universe APIs and it works fine.
    We will be building the Forte piece and compiling it this week.
    Our first application is to inquire the UniVerse data, after that is
    successful, we will move to inserting & updating.
    Let us know how we can help.
    Larry McCartney
    [email protected]
    (203)459-7959 - Trumbull
    From:
    [email protected][SMTP:[email protected]
    om]
    Sent: Monday, October 12, 1998 11:00 AM
    To: [email protected]
    Subject: forte-users-digest V1 #1111
    forte-users-digest Monday, 12 October 1998 Volume 01 : Number
    1111
    In this issue:
    Legacy Integration with PI/Open
    is OBB32.dll available
    Java Integration
    Java Integration
    Re: Legacy Integration with PI/Open
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    RE: Forms That Will Not Close
    Re: AfterValueChange event trigged when it shouldn't be...
    math library
    From: [email protected]
    Date: Mon, 12 Oct 1998 09:49:56 +1000
    Subject: Legacy Integration with PI/Open
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.
    Thanks in advance for any help.
    Greg Barber.
    The information transmitted is intended only for the person or entity to
    which it is addressed and may contain confidential and/or privileged
    material. Any review, retransmission, dissemination or other use of, or
    taking of any action in reliance upon, this information by persons or
    entities other than the intended recipient is prohibited. If you
    received
    this in error, please contact the sender and delete the material from any
    computer.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "sridhar t" <[email protected]>
    Date: Sun, 11 Oct 1998 22:01:36 PDT
    Subject: is OBB32.dll available
    hi,
    am working on forte3.0.G.2. when i tried to use objectbroker library i
    am unable to find the runtime objectbroker library (OBB32.dll). is this
    dll available with this version. if not is there any alternative.
    thanks,
    sridhar,
    Goldstone Softech USA
    Get Your Private, Free Email at http://www.hotmail.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: srinivasa gopi <[email protected]>
    Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
    Subject: Java Integration
    Hello,
    I'm trying to integrate Forti with Java in Java mode using IIOP.I
    followed the steps as explained in the Forti Web enterprise manual.I
    compiled the Java files that are generated by Forti along with the
    client Java file.The Java applet is getting downloaded on the client
    browser(IE 4.0), but the problem is browser is giving an exception
    ** Java.lang.RuntimeException can't connect to service object with
    the ior file name **.
    My question is on every client is it necessary for ORB(Visigenic for
    Java 3.2) and also the Forti Java interoperability package that is
    provided by the Forti for compatability with Java or it is not
    required on the clients ?
    Is there any other alternative to achieve the goal as this will give
    wide access to the Forti service objects through Web Browser clients.
    Please mail me the solution to this problem as early as possible it is
    very urgent.
    Thanks in advance,
    Srinivasa Gopi,
    Goldstone Softech USA
    DO YOU YAHOO!?
    Get your free @yahoo.com address at http://mail.yahoo.com
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Tim Hagemann <[email protected]>
    Date: Mon, 12 Oct 1998 09:21:06 +0200
    Subject: Re: Legacy Integration with PI/Open
    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experiencein
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue isthat
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering
    the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 09:38:25 +0200
    Subject: RE: Forms That Will Not Close
    Exiting the event loop will not close the window! Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    Hi,
    We seem to be having some type of deadlock problem when trying to
    close
    forms and am wondering if anyone else has experienced this problem.
    The
    phenomenon does not always occur and is not specific to any one client
    machine.
    I will explain the phenomenon:
    1. We have an object that contains our main application startup
    method.
    This method then instantiates our main application window (Control)
    and
    invokes the Display() method using start task.
    2. All other forms created by the application are created using a form
    manager service object which exists on the client partition. The form
    manager has a CreateForm() method which instantiates a form class of
    the
    specified type and invoked the form's Display() method using start
    task.
    3. Each form has a Close push button which when clicked invokes
    Window.RequestFinalize().
    Now, the problem we have is this:
    The user starts the application and the main application window is
    displayed. The user then selects an option from the main window and a
    child form is created using the form manager service object and is
    displayed. The user can continue to create more child forms by
    selecting
    options from the main window and all child forms are instantiated and
    displayed correctly.
    However, when the user attempts to close one of the forms the form
    does
    not close. The finalize event is triggered and the event loop is
    exited,
    but the form continues to be displayed and does not close. If the user
    then moves the mouse pointer over the main application window, the
    child
    form immediately closes. Moving the mouse cursor over other child
    windows (or even the desktop) does NOT do this - only when the mouse
    cursor is moved over the main window does the child form close.
    Does anyone have any ideas on this?
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive
    <URL:http://pinehurst.sageit.com/listarchive/>- -
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Jason de Cean <[email protected]>
    Date: Mon, 12 Oct 1998 17:47:20 +1000
    Subject: RE: Forms That Will Not Close
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as well
    Regards,
    Jace.
    On Monday, 12 October 1998 17:36, Rottier, Pascal
    [SMTP:[email protected]] wrote:
    Exiting the event loop will not close the window!
    Invoking
    'Close' method on the window will. Check if this method
    is executed. It appears, the AfterFinalize event exits
    the
    event loop and nothing more. Then, your applications
    waits for some event from your main window, like 'Mouse-
    Enter', before invoking Window.Close().
    Pascal
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: "Rottier, Pascal" <[email protected]>
    Date: Mon, 12 Oct 1998 11:04:24 +0200
    Subject: RE: Forms That Will Not Close
    Jason,
    No, self.Close() should close the window. This is the
    method I referred to. You could place a traceline
    behind self.Close() to see if it is executed. It is not
    inconcievable some exception may exit the Display()
    method before self.Close() is executed.
    After that, maybe, some events from your main
    window trigger something that causes a call like 'My-
    Window.Close()', where 'MyWindow' is a subclass of
    'UserWindow', so 'MyWindow' gets closed after all.
    Maybe you've overridden 'Close()', so now it doesn't
    work properly anymore.
    Are you sure you exit the event loop after you press
    the close button?? The display method is not regis-
    terred for any <PushButton>.Click event, though maybe
    you just didn't include the full Display method in your
    mail.
    Remember that an event loop will only respond to an
    event if it is not currently handling an event. So, the
    method behind <PushButton>.Click may call a self.
    Window.RequestFinalize(), which will cause an After-
    Finalize event to be posted, which will be placed in
    the event queue. If this method however keeps waiting
    for something, the event loop will not respond to the
    AfterFinalize event, until this method is done waiting.
    Pascal.
    Hi Pascal,
    The Display() method is as follows:
    self.Open();
    event loop
    when Window.AfterFinalize do
    exit;
    when task.Shutdown do
    exit;
    end event;
    self.Close();
    <end>
    Are you saying we should do a Window.Close() in there somewhere as
    well
    Regards,
    Jace.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Thomas Kunst <[email protected]>
    Date: Mon, 12 Oct 1998 14:28:55 +0200
    Subject: Re: AfterValueChange event trigged when it shouldn't be...
    Which version of Fort=E9 are you using? We had some strage problems with
    GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
    Fouche, Jaco wrote:
    =
    Hi there,
    =
    I'm hoping that someone out there has experienced the following (and
    knows why it is happening. ) :-)
    =
    I have a couple of windows on which the AfterValueChange event is
    triggered on a field upon hitting the delete key.
    We all know that this should only happen upon leaving the field, ie. th=e
    field loosing focus. The problem is that I'm trying to recreate this in=
    a simple test class, but now it won't happen. I still have the original=
    windows on which it is happening, but I would like to construct
    something small and simple to send to Forte.
    =
    Any ideas as to why this could be happening?
    =- -- =
    Dr. Thomas Kunst mailto:[email protected]
    sd&m GmbH & Co. KG http://www.sdm.de
    software design & management
    Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
    Tel +49 89 63812-221 Fax -444
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    From: Greg Gorham <[email protected]>
    Date: Mon, 12 Oct 1998 09:51:07 -0400
    Subject: math library
    I need direction to the source of Forte libs that handle more scientific
    math. Also included is the need for more scientific print formating. I
    understand, second hand, that such material is available from third
    party vendors/sources.
    Thanks
    Greg Gorham
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    End of forte-users-digest V1 #1111
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Greg,
    This is a bit of a long shot, but has anyone experience with integrating
    Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
    to read and update a PI/Open database from within our Forte application,
    and we would be most interested to hear from anyone who has experience in
    doing this.
    We are aware of a set of APIs provided with PI/Open that are written in
    "C". We could wrapper these from within Forte, however the issue is that
    the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
    You could write a dll (on windows) or shared library (on unix) wrappering the
    original,statically linked "C"-Libs. This lib could be used by Forte.
    Tim Hagemann
    Tim Hagemann
    Ascom GmbH Email: [email protected]
    Charlottenburger Allee 61 Phone: +49 241 96806 273
    D-52068 Aachen Fax: +49 241 96806 225
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Maybe you are looking for

  • How do I use FILE_GET_NAME and make my resulting dataset name unique?

    Okay, here's a case where I have a bunch of pieces to the puzzle -- a little knowledge here, a little knowledge there -- but I'm having trouble putting them together. I am working on an RFC that is called by XI as part of an interface.  This interfac

  • Adobe, please help me with my transition to the Photography Program

    It has cost me days with no effect. Her eis what I want: have my one-app Photoshop CC to be transitioned to the Photography Program - which I managed to buy from Adobe (by telephone, in Dutch). I have the confirmation. First of all: I live in The Net

  • Passport screen freezes after a long call

    Hello, I've got my PassPort since fall october. Although I am quite happy with it, I have noticed that after a long call, say 15min or more, the screen becomes slowly responsive. It doesn't fully freeze, though it is very slow to bring back the unloc

  • Using Regular Expressions for Completion

    I'm trying to build a text completer for a simple little editor. The general idea is that I have a regular expression which describes the syntax of an expression and a set of strings which are all semantically valid cases of the expression (the latte

  • Strange Error ! For Reading Application Server File

    Hi Friends, I am getting very strange error while compliling my code. As I am reading a text file for input from Application server for further processing. But my system is giving me an error. As the file and the path is not yet configured on the app