Integration with SAP - Comparing SAP XI with other EAI Middlewares
I highly appreciate if you could throw some of your expertise and insights to the following:
1. What are all the architectural advantages if we use SAP XI instead of using other integration middlewares such as SeeBeyond, WebMethods etc.
2. Most of the EAI middlewares (such as SeeBeyond, WebMethods etc.) provide BAPI and ALE Adapters to integrate with SAP anyway. So, what is the architectural and business value add if we use SAP XI in this scenario?
3. Compare the capabilities of SAP XI any other top EAI middleware that you are familiar with. (Preferably SeeBeyond)
Thanks,
-Sorna
My two cents -
1. XI is from SAP so, no dependency on other vendor to upgrade their platform to take advantage of new features provided by SAP in newer releases.
2. For SAP centric integration, XI is not just a platform. You also get a lot of content for standard SAP centric integration scenarios and no of scenarios supported will increase over the time.
3. XI also supports BPM.
4. Support for ABAP mapping.
Regards,
Sanjeev
Similar Messages
-
Integration with SAP - Comparing SAP XI against other EAI Middlewares
I highly appreciate if you could throw some of your expertise and insights to the following:
1. What are all the architectural advantages if we use SAP XI instead of using other integration middlewares such as SeeBeyond, WebMethods etc.
2. Most of the EAI middlewares (such as SeeBeyond, WebMethods etc.) provide BAPI and ALE Adapters to integrate with SAP anyway. So, what is the architectural and business value add if we use SAP XI in this scenario?
3. Compare the capabilities of SAP XI any other top EAI middleware that you are familiar with. (Preferably SeeBeyond)
Thanks,
-SornaHi,
I do not want to comment on other middlewared outright. But, I will surely share the value proposition of SAP NetWeaver in general, and XI specifically as an Integration Platform.
SAP NetWeaver offers a set of solutions for Integration at 3 levels
1. People Integration - Enterprise Portals, Multichannel Access, Mobile Infrastructure
2. Information Integration - BW, MDM, KM
3. Process Integration - XI
All these solutions work on the same Technology Platform - SAP WebAS and can talk to each other seamlessly. They are also very well integrated to SAP Solutions, hence if the back-end applications are from SAP, it gives a strong reason for the customer to choose from SAP NetWeaver stack. It will definitely have performance advantes also when talking to SAP solutions.
The second most important point is, all SAP Solutions are shipping, or will ship their Integration Content (what SAP calls Business Content) for all the various products of the SAP NetWeaver Stack, including SAP XI. This reduces the integration effort required at customer site, since the integration content is already available (atleast from one side, even if the other application is Non-SAP).
Hence, although other middlewares offers capabilities to integrate with SAP solutions, NetWeaver will reduce the TCO in this case by providing better integration, Business Content from SAP, and also support for integration content from SAP.
Warm regards,
Venki. -
Is it worth buying the macbook pro with 256GB compared to that with only 128GB?
I will mainly be using the laptop for university style dissertations/powerpoints. I'm also a big music and photo lover but I hardly ever download videos. What are everyone's views?
Kind regards,
CharlotteIt is a function of the types of data and how much is generated. If all one would ever have is text on the MBP, certainly 128 GB of storage may be enough. If one starts adding pictures, music, video, game applications etc., the equation can change radically. I venture to say that almost all university students use their computers for personal as well as school activities.
If the bank account is tight and additional storage cannot be added, in all probability great discipline will have to be exercised as to what will be kept on the MBP. If you order a MBP with minimal storage and find you need more, all is not lost because you can purchase, at a reasonable price, an external HDD to take up the slack. The disadvantage is that you then have another physical item to deal with but a degree of convenience and efficiency is lost.
Ciao. -
Integration of SAP R/3 system with BOXI3.0 and SAP EP
Hi experts,
I have a requirement like getting data from SAP R/3 system and make it as Xcelsius Dashboard.
So i have installed BOXI3.0, SAP Integration Kit, Live Office, Crystal Report and Xcelsius. Then i have followed this blog /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication . In this blog explined about how to connect BI System but i want to connect SAP R/3 system.
1. What is purpose of Role import option?
2. What is the type of role i need to import for connecting R/3 system?
3. Do i need to create any specific role for this?
4. How do i integrate Xcelsius dashboard with portal?
Please help me.
Regards,
Kumar.Hi Kumar,
did you follow the installation guide for the SAP Kit and configure all parts of the publishing ?
if so check all configuration steps to see where it fails.
you can also look here:
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
on the ID : each object receives an ID on BusinessObjects Enterprise. You can look at the documentation and search for the CUID or GUID.
Ingo -
Hello,
has anyone experience with the Integration of a 3rd Party System with SAP C4C using SAP Netweaver Process Integration?
Is this a process of days, weeks or months?
Any documentation on this?
I am thankful for every Input!
BR, RomanRoman,
Please read through the integration guides available on the SAP service marketplace as they address this specific topic in great detail.
http://service.sap.com/cloud4customer
The time duration of the project depends on the business process complexity being resolved and the level of integration desired between the different enterprise solutions in the landscape.
Thank you. -
Integrating with SAP CRM / SAP ECC apps with SMP 3.0
Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328Hi All,
I have some questions for integrating SAP ERP / SAP CRM applications with SMP 3.0, what my questions is
1) I want integrate SAP ERP / SAP CRM apps with SMP 3.0 from scratch. (which are available in the SAP Portal)
2) For that what are all the per-requisites, after integration is done if application want required any changes then how to update that app.
3) Provided SAP ERP / SAP CRM applications are all available executable only, is there any source are available for all theat apps.
Some of SAP ERP applications SAP ERP Customer Order Entry, SAP ERP Order Status, SAP ERP Quality Issue, SAP Employee Lookup and etc.. and
Some of SAP CRM applications SAP CRM SALES, SAP CRM SERVICE MANAGER, SAP Customer and Contacts, SAP Customer Briefing, SAP Customer Financial Fact Sheet, SAP Customer Loyalty, SAP Direct Store Delivery and etc... which are all available in the SAP Portal.
Please help me on the same.
Thank & Regards,
Ranjith Lingala
+91-9985241328 -
Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0
Hi Friends,
We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0 which is running in Windows 2008 Server and with SQL Server 2008 as its database.
I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
Kindly provide your valuable inputs.Looking forward to hear from you soon.
Thanks and Regards,
VimalHello Vimal
regarding this software a number of publications are available:
http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
Here you will find the list of rerequisites etc. and the integration e.g. into SAP EHS Management is explained.
In any case. The SAP marketplace is the right place to take a look regarding prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
With best regards
C.B. -
Integrating SAP ECC 6.0 with Microsoft Windows 2003 Active Directory
Hi Gurus,
We are planning to integrate our SAP ECC 6.0 with Microsoft Windows 2003 Active directory.
I have several questions on this:
1. Can i authenticate all the users from SAP
2. It is used only for user authentication or can it be also used for password authentication
ie user can login using his windows password?
3. While integration in SAP does a separate table or a field is created in database.
4.If a employee leaves a company than in SAP is it possible to lock & deactivate the user automatically.
Thanks in advance.
Regards,
NiharHi Mastek,
You should be able to accomodate your needs with respect to integration of your AD accounts with SAP ECC ABAP. This can be done via LDAP connector configuration. The below has info on how to perfrom the configuration at a high level. You will have to integrate, and map certain user data. You may also want to do some LDAP Connector research:
[http://help.sap.com/saphelp_nw70/helpdata/en/10/1a063a15c611d4b61f0000e835363f/content.htm]
On the Java stack - you can also confugure UME to integrate/authenticate with AD:
[http://help.sap.com/saphelp_nw70ehp2/helpdata/en/12/7678123c96814bada2c8632d825443/content.htm]
Hope this helps! -
Are you utlizing SAP's Quality Center with Integration to Solution Manager?
Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
AbuHi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM -
Key differentiation in ERP SAP Finance and Controlling with Other ERP Appli
Hi ALL,
I want to know one important thing in ERP SAP Application, What is the Key differentiation in SAP Finance and controlling with other ERP application like Oracle, PeopleSoft...
And what is the main feature in SAP Finance and controlling with other ERP application. Tell few SAP FICO features compare to other ERP application
thanks
KiranHi ALL,
I am waiting for you reply kindly cooperate in this
thanks
kiran -
PP module integration with SAP-OER & SAP-AII
Dear All,
What is SAP-OER & SAP-AII module?
How this module integrated with SAP PP?
MaulikPlease go to
http://help.sap.com/erp2005_ehp_05/helpdata/en/52/16a979543311d1891c0000e8322f96/frameset.htm -
Doubt With Services in The portal for other modules of SAP
Dear Experts.
I don't know if this doubt I should post in the forum ERP Employee Self-Service .
In The portal SAP have service for E-Recruiting(E-RC), Employee Self-Service(ESS), Manager Self-Service(MSS), Learning Solution(LSO), that are services of HCM.
My question is : SAP have solutions in the portal for the following components:
Materials Management (SAP-MM), SAP-FI , and other components of ERP in the portal?
Thank in advance for your help,
RegardsHi,
For close this post: Have the following question:
There are is Business Package for the components of Materials Management (SAP-MM), SAP-FI ,
in the portal?
Regards -
How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
GalynaHi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1) Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K. -
Procedure to Integrate SAP PI 7.1 with Teradata and IBM Data stage
Hi,
We are integrating SAP PI 7.1 with Teradata and IBM Data stage for retail customer.
Please provide the following information.
1. What are the connectors available in Teradata and IBM Data stage
2. What type of output/input, Teradata can give/take from/to SAP PI
3. What type of output/input, IBM Data stage can give/take from/to SAP PI
4. How to handle Bulk uploads between SAP PI and Terdata, SAP PI and IBM Data stage
Thanks,
RameshHi Ramesh,
Could you get answers for your queries. We have Teradata 13.10.2 in our landscape and I have exactly same queries that you asked. Can you possibly share your experience in this area.
Anand. -
Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module
Dear All,
I would like to know the know the Key Differences in ECC 6.0 and 4.6C with respect to SAP SD Module. I have already gone throught the release notes and
upgrade erp in service.sap.com. I have also checked solution browser.
Its Urgent.
Regards,
RakeshHi Rakesh,
Some of the differences are:
1. Document Flow
In ECC 6.0, The flow of sales documents is seen much better and improved as compared to 4.6C. Once You look at the screen, You will clearly figure out the difference.
2. Sales Order Look and Feel
There are more tabs in ECC 6.0 for Item Level Details.
The Sales Doc. appears as supremely perfect.
3. ECC 6.0 is built on NetWeaver Technology (that possess SOA i.e. service oriented architecture) , Hence more reliable and Improved as compared to previous one.
Hope this will help you. Reward if found useful
Regards,
Gaurav Raghav
Maybe you are looking for
-
Plant on goods receipt document
Hi gurus We have a situation where a purchase order is created automatically for intercompany stock transfer deliveries. On the PO when we default the plant to be P001. But the plant on FI doc, created by the goods receipt, is different than the on
-
My digital signatures no longer work the credential selected for signing is invalid
Adobe Acrobat Pro My digital signatures no longer work I get the error of "the credential selected for signing is invalid" when I try to add my signature Even my old signatures on all my previous signed documents from years ago are broken now. How d
-
When I try to install Firefox for Android on my Motorola Defy Mini (XT320), Google Play Store tells me that my device is not compatible with Firefox for Android,so I cannot install it; according to Antutu Benchmark system info, the Motorola Defy Mini
-
[solved] [dwm] wrong encoding
Hi, I have a few questions related to dwm: 1. The titlebar of dwm gives me problems with umlauts (öäü). Its a fresh 2009.08-installation with dwm (5.6.1) as windowmanager. Instead of umlauts funny symbols and letters are shown. I have the same probl
-
Disableing the printer color management in the printer settings box
Hello I am printing on a Epsonstylus r1800 printer using windows 8.. Printer has new drivers v6.55 The Adobe print setup reminds me to disable the printer color management in the print settings box. I can't find where to do this in the print setting