Integrtion Scenario using BPM with two sender and multiple receiver
integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?
Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech
Similar Messages
-
File to RFC scenario using BPM : a synchronous one
Hi All
I am doing File>RFC>File scenario using BPM with help of the blog
RFC Scenario using BPM --Starter Kit
here everything is explained but i am getting error while the processing of BPM part
Input file is being picked (this part is success) but rest BPM and response i am not getting back in .
interface names
filereq_MI >Filetoabstract_MI>Sync_MI>RFCtoabstract_MI>Fileres_MI
(abstract means its an abstract interface)
i have configuered the Integration process as follows
Start>Recieve>synch_send>send>end
step : Recieve
mode : asynch
message:Filetoabstract_MI
step : synch_send
mode : synch
synch interface : synch_send
req message:Filetoabstract_MI
res message : RFCtoabstract_MI
step : send
mode : asynch
message:RFCtoabstract_MI
and i have given interface mapping during second (synch_send) step but here mapping is giving problem its showing exception error during mapping
error is there
1) Integration process ---> file
2) Integration process-->R/3 systemHi,
Configure the Integration Engine According to this Blog and Trigger the Process again
Configuration of a Central Integration Server
Regards
Seshagiri -
BPM when both sender and receiver systems are Sync. Please help!
Hi Experts,
I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
GopalHi Hemant,
I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help!
Thanks & Regards,
Gopal -
I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
Cheers, Tom -
using windows vista with two users and I can only open books with adobe digital edition
You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID. -
Could any one provide me with the links of file to file scenario using BPM
Could any one provide me with the links of file to file scenario using BPM
Hi,
omit RFC part
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
File to IDOC Scenario using BPM
Hi Experts,
I am working on file-Bapi-Idoc scenario using BPM.
I have two conditions
1. If the Sonumber is populated then need trigger an Bapi_change
2.If the Sonumber is not populated from the file then need to trigger a Bapi_Createfromdat to create the sales order and receive the salesorder number as response from Bapi
and the response of these BAPIs should be validated whether the Bapi is successful or not.
If it is successful message then need to trigger IDOC or else should throw an alert message.
let me know the steps involved in this scenario.
can i send alert message to other email IDs or can i send it to only XI admin?
Please let me know u r inputs.
Thanks in advance
PraveenHey,
You need to have a BPM for this.
BPM design.
Recieve step(abstract asynchronous) for file structure
Switch Case(condition whether sonumber is populated or not)
if populated
Branch 1(of switch)
transforamtion step:- mapping between File and Bapi_Change(Request structure)
Send step(abstract syncronous) To send the BAPI_change
Branch 2(of switch)
transformation step:-mapping between file and BApi_Create
Send step(abstract synchronous) To send the BAPI_Create
Block step(which will include the Switch step)
trigger an Execption in case of an error(in any of the two branches) through the block
The Exception will trigger an alert.
Now after the Block step there will be a transformation step(which will have the mapping between RFC response and Idoc)
Next is the send step(abstract asynchronous) for the idoc
In case if there is no exception the Idoc will be triggered or the exception branch will trigger the alert
rewards points if useful
regards,
Milan -
I did whatever mentioned in that blog(/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit). Also I do have some experience in BPM.
After testing I don't see the file inthe outbound directory. So I started analysing from all sides.
1. First checked the message in my sxi_monitor, it black and white flag showed that the message processed successfully.
2. I opened the message and saw the message from CENTRAL Client passed to PE ADAPTER Client with tooltip showing "Transfer to Process engine".
1. First I checked whether my BPM is correct by pressing F7. There is no syntax error.
2. I checked in sx_cache, the ReturnCode was 0.
3. In smq2 I saw a message stuck in the PE queue. I double clicked the queue and saw the status text as "Permanent error in BPE inbound processing". So I kept debugging by pressing F8 and after that the message got disappeared.
4. I opened the message in sxi_monitor, and after the CENTRAL Client the message passed to PE ADAPTER, which measn the meesage has got transferred to process engine. But i'm not seeing any change in the file.
5. Also what I did was use transaction SXMB_MONI and chose process radio button and execute. Located my message but there is no task value which starts with 'WS..' in Process def column.
Can you please pinpoint where i went wrong and anything else?
One more thing, everytime i test the new file the file goes and gets stuck in the queue and I have got to follow the item 3 mentioned above.
Thanks,Hi Kishore, The second block is a synchronous send block in the BPM triggers the call to RFC. I've done it as per the blog. There is no transformation step in the BPM. Anyway I fixed the issue. In the receive block whatever container value I used should be used in the send block also. Earlier I was getting some warning. Now my BPM is clean and it worked.
Lesson learnt: Ensure there is no warning in the BPM. Thanks again Kishore.
Thanks,
Edited by: XISearch on Apr 29, 2011 5:20 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:24 AM
Edited by: XISearch on Apr 29, 2011 5:25 AM -
File to SOAP Scenario Using BPM
Hi,
I am doing File to SOAP scenario using BPM.
while doing Integration Process in IR, i got the following error message
"Expression of simple type xsd:string expected"
But i have given xsd:string in the correlation element as well as in Data types.
I dont know why it is getting the error.
could you anyone please help me to sort out?
Regards,
Sai Ch.Hey,
Check in the correlation editor, where you define the condition.
Whether the data type of the XPath is string and whether it matches with the data type of the messages that you have selected.also make sure the type of the correlation variable is string.
regards,
Milan -
Blogg RFC scenario using BPM - starter kit (more detail on BPM required)
I follow this blog to the letter - because it is the same as my scenario:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
The problem is I have no experience with BPM. I have setup the Integration process as I think it should be but I get an error.
Could one of you experts go through the BPM steps in more detail? Screen shots/details of the properties and containers on each step would be very useful. Thanks.Hi Lynn!!
Check this SAP help for certain requirements when to use BPM:
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/13283fd0ca8443e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ca/7c5c41fe06cf1ee10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e8/8e2d4233c8db2ce10000000a1550b0/content.htm
Take a look at this blog by Michal,
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in BPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in BPM
Check this weblog for a step by step procedure:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
or case study go thru this blog:
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
for checklist:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
Take a look at this blog for some very good guidelines on when to use BPM's and when not to use BPM,
/people/swen.conrad/blog/2006/12/22/xi-ccbpm-performance-under-perform-or-out-perform
Thanks !!
Pls reward if useful -
How to use lightroom with desktop PC and mobile with MacBook Pro ?hav
At home I have a desktop PC with all my lr files stored on NAS drive I want to be able to access and edit on macbook when away from home.
1 Is it possible or do I need a Mac pc or change laptop to windows based ?
2 do I use remote access to NAS or use previews and sync catalogue ?
3 can lr exist with both file formats at same time ?I use a similar setup, with a Windows desktop PC and a MacBook Pro. My photos are on an external drive connected to the Windows machine, and I sync the catalog and smart previews using Dropbox.
See see my post A Portable Lightroom Catalog on TipSquirrel.
Also, see my post on Using Lightroom with Two Computers.
mh++ -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
RFC Sender and RFC Receiver Sync Scenario . Help required.
Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
RegardsHi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM -
since i instaled ios 6 , i send a message with my iphone and i receive in my ipad. what is happening?
Sounds like it is using your Apple ID / Associated Emails to receive the iMessage. This means that the person who is replying is making it go to your email address. Make sure that the person you are sending the iMessage to has an iPhone as well. I don't remember if other iOS devices can send iMessages to a mobile phone number.
-
Using iPhone with two computers
Home PC - MacBook Pro
Work PC - Windows
both running iTunes 7.7
My music is on my home Mac and I manually create playlists, add music etc.
With my 3G Nano, I can connect and listen to songs on my iPod from my work PC. I can't seem to do this with my iPhone - my PC sees the iPhone but all of the music is greyed out and cannot be selected.
Is it a limitation of the iPhone that I cannot use it with two computers in this way, or is it a configuration issue?
I would prefer not to have to buy a set of external speakers just to use my iPhone to play music at work.
thanks
ShaneActually, there are several articles on the web about the fact that you CAN
synch the itunes with two computers. Music, Video, and Ringtones can be done from one computer, and Mail, Contacts, etc. can be done from a second computer.
Just do a Yahoo search on "synching iPhone with two computers."
If you are trying to do music from two computers, you are right, that will not work. There is a program, which I think the Yahoo search above will also uncover that allows you to do a "swap," where you can have the songs from one computer show up on the iPhone, and when you swap, the songs from the other computer show up. I am not sure if this utility survived the upgrage to version 2.0 of the softweare.
cheers,
Ray
Maybe you are looking for
-
Ok, here's my problem: I had all my songs on my ipod. Then when i went to update my songs, all of the songs got deleted and so did the playlists. Now when I try to put the songs back onto my ipod, it says "Songs on the iPod Bryan cannot be updated be
-
Since none of my devices have a "manage account" selection under Sync (or Sync set up), there's no way to get or reset my recovery key. I only see "Set up Firefox sync" and "Pair a device". Everything else leads to a dead end without access to a reco
-
Hi PPl, It happened second time in a row. Though the root disk is mirrored, server is unable to boot from alternate disk (mirror disk) When the disk was found faulty, still unable to boot the OS from alternate disk, it says it still probe/look for ot
-
Moving the remarks column in the G/L Report
Hello, Please can you consider for a future release, the ability to change the position of the 'Remarks' column in the General Ledger report. Currently, 'Remarks' does not show as a field in Form Settings. Many thanks, Kate
-
Air localconnection not working
Hi I have a simple question: I have two SWF files that communicate through a localConnection. This works fine, but as soon as I publish one of the two SWF's as an AIR app, the connection is refused. What is the difference between a localconnection fr