Intel 320 160gb SSD any issues with mac pro 2008?

Hi there.
I have a mac pro 2008. and Install Intel 320 160gb ssd. and boot...
It's shows black screen...
is any one has that issue? I tested that SSD with my old quad mac pro 2007, it works fine...
Please help me....

The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself.

Similar Messages

Are yo having any issues with mac os x the latest update heres the fix

ok a lot of people have had issues with installing the update via the software update option in mac os x tiger now let me explain something first it is not apples fault they did not expect that tons of people would be downloading this update at once which caused problems
some of the issues people have run into are
1.the cd rom after the update the superdrive or regular super drive will not read cds
2.your photoshop application stops working or any adobe product stops working
now the simple fix is this
go online to apple.com select the download section in the support area of this web page once this is done
go and download the update manually and run the update manually this will correct any issues with the update including cd rom drive errors and even adobe product errors

ok a lot of people have had issues with installing
the update via the software update option in mac os x
tiger now let me explain something first it is not
apples fault they did not expect that tons of people
would be downloading this update at once which caused
problems
Since Apple know exactly how many systems are out there, have experienced download demands from previous update releases, they very clearly know the kind of demand there will be when a new update for MacOS is released. The issues with Software Update are nothing to do with this - and indeed, historically there have always appeared to be a small proportion of systems that have not functioned correctly with a MacOS update - a quick perusal of MacFixit going back some years would evidence the fact.
When Software Update downloads the wrong components, it's not volume of traffic that causes it, but that when Software Update examines the specific system, it finds components that cause it to misidentify it.
some of the issues people have run into are
1.the cd rom after the update the superdrive or
regular super drive will not read cds
2.your photoshop application stops working or any
adobe product stops working
There are many reasons users may suffer these, and similar (and very DISsimilar) issues, not just from the update itself, but prebinding, permissions, system caches, font files, plists....
now the simple fix is this
go online to apple.com select the download section in
the support area of this web page once this is done
go and download the update manually and run the
update manually this will correct any issues with the
update including cd rom drive errors and even adobe
product errors
You omitted to mention WHICH update file to download - which is the critical part of the advice. Users who experience problems with the update as downloaded by Software Update, should download the 10.4.8 'Combi' update file from the apple/support/downloads page. The combi (combined) update contains the entire thing, not just the bits tailored to what Software Update takes to be the specific system. There are two versions of this file - one for PPC systems and one for Intel - it's important of course to select the correct one for the type of system, being used.
People often say that the Combi update fixes their problem when in fact what may well be happening is that by installing the combi update version, it overwrites faulty files (plists for example) that had caused the problem the user experienced. Installing this version of the update can certainly RESOLVE these kind of problems, but is not the only way to do so.
Simple and easy when it works - undoubtedly so.

Replacing old HD with SSD and Hybrid HD Mac Pro 2008, 10.7.5

My old 1tb 7200 rpm drive has started doing some quirky things, so I decided to upgrade to a 240 Gb SSD for my OS and App's, and I would install the 2TB Hybrid drive to hold the home folder with movies, pics, music. So I formatted my 2TB disk in disk utilities.
I copied, by dragging and dropping my home folder from old drive to new 2TB, I went into system preferences, under User/Group created a new user at the administrator level, and set the new user to open at login.
When I restarted it was the old galaxy screen, the dock had moved back to the bottom and it was set up different.I also can open Iphoto or itunes and they are empty, "The folder “Pictures” can't be opened because you don’t have permission to see its contents", and the same goes for Itunes, I haven't tried FCPX or the Adobe Products I use.
"So, I think well I probably just need to set up my ssd with my OS and App's so the new disk can see my prefrences", so I format, use Carbon Copy Cloner, deselecting, under the User tab, my old User and the New user I had created for the new 2TB drive, because I have no room for it on the 240 GB drive. And, I deselected some apps I didn't want to come over. I cloned it, changed my start up disk in my preferences, and restarted.
I still get the same thing when I logged into my new 2TB Drive. I am planning on keeping my old drive for archive, and I also backed up to an external using Time Machine before I started messing with the new drives.
Please Help!
Mac Pro 2008
OSX 10.7.5

Mac OS X is inherently a Multi-User system designed to protect each User's data from all other Users. A new User does not have access to your existing files, including the desktop Preferences and the Dock Preferences
You need to do one of:
a) change all the permissions all around -OR-
b) make this change without creating a new User (e.g., by cloning your original User or by Installing a new version of Mac OS X and using Assistants to connect to the old User data. This guide can help:
Setting-up a new Mac from an old one, its backups, or a PC

Need help with Mac Pro (2008) iCloud sync problem

I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing. I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files. I then found that I did have another Mountain LIon partition in which the data syncing all worked. Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work. I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

I am using a Mac Pro (Early 2008) with multiple drives and partitions, some of which I use for various software testing. I wanted to have access to the same data on various partitions, so I tried to use iCloud to store some Pages files. I found that in the Mountain Lion Partition that I normally use, that the document data ( Pages, Numbers, etc) would not upload to the cloud... just showed as waiting. All other iCloud Data ( Calendar, Address Book , etc) did sync fine. If I accessed iCloud using a browser or looked on iClould using the iCloud Manage function in the iCloud system preferences, I could see all the files. I then found that I did have another Mountain LIon partition in which the data syncing all worked. Other testing showed that if I did a clone of the working partition using SuperDuper, the clone worked properly, but if I did a clean install of 10.8.4, the document data did not sync.If I did a clean install and used the migration assistant to migrate from the working partition, it still did not work. I later found that if I replaced the top level Library file in a non working partition with the one from the working partition, that I could make the non working partition sync properly. I have not been able to find a subset of the folder that would make things work, but have not tried every combination. At this point my only conclusion is that there must be a bug in the 10.8.4 installer. Apple has been working on this for a few weeks, but has not found anything and cannot duplicate... but they are testing with iMacs.
Is there anyone with a Mac Pro (2008) who can do a clean install of 10.8.4 on a partition and see if they can still access their iCloud data (Pages, Numbers, Etc). If so that would probably confirm the otherwise unexplanable problem.

Any known issues with Mac Pro supply?

On the 22nd Nov I ordered my 8 core Mac Pro with 4 x 1TB internal drives 8 GB Ram, ATI Radeon HD 4870 512MB, and Raid card.
At the time Apple Store was showing 5 working days for dispatch.
Here we are on 2nd December and although the store still shows 5 days, the Mac hasn't dispatched yet.
I called Apple support and a man called David said he'd find out what was happening +(I thought that's what support was for - surely they should know)+ and call me back.
Three hours later I called Apple support again and a man called Daniel told me that "Order Management" had replied to David but they didn't know what had happened to the order.
He suggested it may have "dropped out of the system".
I have to say, I'm extremely disappointed with this. Obviously, I'm very anxious to get a new computer +(chiefly for video editing)+ and I don't expect to pay over 4,000 GBP +(about 6,600 US Dollars)+ and have no communication whatever - and then when I'm frustrated enough to telephone for help, find that Apple have taken my money OK but don't know anything about the stuff the money was for.
Any ideas anyone?

Custom BTO taking longer due to configuration?
It's probably due in part to Thanksgiving; I find the online order status is always strange or full of surprises in its estimates and goes from 5 days to shipped or gets held up (maybe they ran out of widgets? the boat was full? weather kept the plane from departing?)
And yes, I get anxious, and end up paying overnight just to get the whole experience and waiting over as soon as possible too~!
And maybe only a super or level 2 can look into someone else's message queue.
There really are shortages of GPU chips with the ATI 5xxx rollout right now, holidays and other factors.
Hint: not to put salt into a wound, not my intention, but the Apple RAID card is not well loved, useful but only because there aren't many choices for an internal Hard RAID controller; plus you really do have to pay for Apple drives (firmware compatibility). Most get one drive and buy those things separately.
So BTO like yours might indeed take longer than estimates go.

Display Issues with Mac Pro 1.1 HELP!!

I have a Mac Pro 1,1:
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version: 1.7f10
Running OSX 10.6.3
I'm on my second graphics card [ATI Radeon HD 2600] after having issues with the original [NVIDIA GeForce 7300 GT]. The issue with the NVIDIA card was that, at times, it would display digital artifacts, glitches, distortion and freeze up the system forcing me to have to do a hard shut down. I found many reports of similar issues with that card and the Mac Pro 1,1's.
When I replaced it with the ATI the problem went away for 6 months and now IT"S BACK.
So, are there any particular graphics cards that work OK with the Mac Pro 1,1? I don't want to waste my money again only to encounter the same issue!
I'm also contemplating getting a new Mac all together.
Please advise, I've read many threads with this issue and they all seem to point to the same deal: replace the card. I can't afford to keep replacing graphics cards.
Saki

The 2600XT required 10.5.2+ and while it may 'look' like a G5 the Mac Pro is not. G5 refers to IBM PowerPC based, not Intel Xeon EFI based.
You're running 10.6.3, might want to update your profile itself.

Internal hard drive issue with Mac Pro

I work for two office that share information through a VPN. Each office has one Mac Pro being used as a server for data storage. The Pros have four internal hard drives (1TB each).
Hard drives in the Pro for OFFICE 1 were configured like so:
HD1 - OS/Boot drive
HD2 - Time Machine backup of HD1/DATA1/DATA2
DATA1 - Data storage
DATA2 - Data storage
Three weeks ago: Time Machine could not find HD2 and could not backup. I rebooted the machine and HD2 reappeared. However, after the reboot, DATA1 did not mount. I was unable to find DATA1 in Disk Utility. However, the drive could be accessed by all other Macs on the network. This machine was taken to the local Apple Store and we were told that HD2 was a bad drive and need to be replaced. We opted not to replaced the drive at this time and turned Time Machine backups off. We haven't had any problems with DATA1 since. (NOTE: During the weeks prior, the client machines intermittently lost connection with DATA1 and would have to reconnect)
Last week: OFFICE 2 - Mac Pro hard drives configured the same as OFFICE 1; however, HD2 was not used for TM backups. TM was turned on and set to backup HD1/DATA1/DATA2 to HD2 (exactly like OFFICE 1). The next day, TM could not find HD2 and backups stopped running. I rebooted the machine, HD2 reappeared, but we did not restart the TM backups.
Today: OFFICE 2 client machines have experienced intermittent disconnecting of DATA1.
I wasn't extremely concerned with the situation at OFFICE 1 as these Pros are almost five years old and in constant use. We plan on purchasing an external drive for the TM backups. HOWEVER, with a similar situation now being experienced in OFFICE 2, I am perplexed.
Could both machine be experiencing hard drive failures weeks apart? They were both purchased and installed at the same time.
Is there a known issue with TM and internal drives?
One difference between the two machines: OFFICE 1 is running OS X 10.8.5; OFFICE 2 runs 10.6.8
Any suggestions/help is appreciated. Thanks!

Relying on TimeMachine has some issues, along with only having one, I use at least two swapping TimeMachine so that they rotate AND I clone every drive (volume actually) so I can swap drives if need be, especially useful for t he system but good for any drive.
Power issues in t he buildings?
There are some programs that will scan for and report and./or attempt to reassign a failing sector ("fail" is qualitative, is 10 write failures a fail? then the 9th is not but it is a "weak sector.") Some run in the background.
Mirror can be 2 or 3 ( I prefer 3, that way if one fails I STILL have a mirror array in place) where any failure is not acceptable, AND where the array data is backed up usually - less important when using a three-drive configurations.
How old, when last initialized (zero), and is it showing spare blocks being used? that last is the most indicative of failed drive.
Rare but a bad SATA cable or power (seeing how the cables are tucked away) is only way generally for multiple failures in same drive bay or computer. Note: early on in 2006-7 there were reports of some customers having motherboard and trouble with a drive bay , and t he problems showed up early.
Often though it is NVRAM or SMC related issue trigged by something else, a USB cable or device that is faulty, even a PCIe controller that is the culprit. And replacing cable, keyboard, device, and resetting SMC and NVRAM (often NVRAM needed to be done multiple times, but never keep resetting SMC) - unplugged and when you connect back up, do not install anything other than system, keyboard and mouse and see if that helps.
With a drive, likely the drive in 85% or more, is fine, but the directory is not, or it needs to be erased to rebuild all the system partitions.
1TB is small for TimeMachine. 350% of the amount of data, and always have free space for a full backup set of all the data. T.M. will try and prefers to automatically backup any and everything plugged in and connected, rather than my preference which is ASK FIRST to add a drive to TM backup set, otherwise leave it out. 600GB of data and system would mean 2.5TB drive, maybe 2TB minimum.

Windows 7 Install Issues with Mac Pro

I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD.
I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version 3.1. After Boot Camp upgrade, I mounted the Windows 7 64-bit installation disk. Since the Windows disk did not open automatically, I then attempted to open the Setup.exe file but got the following error message –
“D:/setup.exe is not a valid Win 32 application.”
I suspect the Boot Camp 3.1 upgrade was for the 32-bit Windows XP system currently installed and this caused Windows 7 (64-bit) not to open.
If my suspicion is correct, would upgrading to Boot Camp 3.1 (64-bit) cause problems with the currently installed Windows XP? Any advice would be appreciated.

I have since attempted to boot from the Windows 7 install disk by using both the OS 10.6.3 System Preferences/Startup Disk and from within Windows XP using the Boot Camp Control Panel. In both cases, all I saw was a black screen with a “Select CD-ROM Boot Type” and flashing cursor. No keyboard input was possible.
If anyone encounters this problem, go to the Boot Camp/Installation and Storage discussion and search for “Select CD-ROM Boot Type”. Hal Jay Greene has an excellent article here titled “Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough” dated Mar 20, 2010 that walks one through the process of creating a boot disk for installing Windows 7 x64. Two minor comments on his discussion. John Anderson’s blog is at www.AndersonsHatch.com (note extra s) and Imgburn can be downloaded free from www.imgburn.com.
I used Mr. Greene’s procedure and the resultant boot disk loaded Windows 7 correctly.
Unfortunately, a new issue arose. Installing Windows 7 over Windows XP requires a clean install that eliminates all Boot Camp installations. After installing Windows 7, I attempted to load Boot Camp by inserting the Mac SL installation disk and clicking on Setup in the Boot Camp folder. The result was this error message: “Boot Camp x64 is unsupported on this computer model”. Fortunately, there is a procedure that worked for me, and my MacPro, to bypass this error message. It can be found near the bottom of this article http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/ on John Anderson’s blog.
Message was edited by: johnshap

Issues with mac pro 2014 and Adobe CC

Having major issues with my New Mac Pro since installing 10.9.3. The issues are with render in Adobe CC products and glitches on displays.
Model Name:          Mac Pro
Model Identifier:          MacPro6,1
Processor Name:          12-Core Intel Xeon E5
Processor Speed:          2.7 GHz
Number of Processors:          1
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache:          30 MB
Memory:          64 GB
Boot ROM Version:          MP61.0116.B05
SMC Version (system):          2.20f18
Illumination Version:          1.4a6

Well known issue and no solution yet. There is nothing wrong with your computer. http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compati bility-with-critical-pro-apps/

Video display issues with Mac Pro and GeForce 7300?

I'm just wondering whether anyone else has experienced any video strangeness with their Mac Pros with GeForce 7300 cards? Basically, twice now I've had the mouse cursor stop responding and the entire screen turn black, then a second later everything's back to normal (with the cursor moving and the display back). I seem to recall a similar issue on my Windows PC with a Quadro FX 1100 card, so I'm hoping it's just a video driver issue.
Bryan

I am not sure if its the monitor, the MP, or the video card, but, I have had my computer completely replaced after reporting to my local Apple Store about my G5 fans over heating and my monitor either not being able to wake or refusing to sleep. I called AppleCare and did all the normal trouble shooting but they said take it in to store. But now that I have a brand new MP 3.0 I am getting the same issue but no fan noise. I have a 23Cinima HD (the strore said it was fine when they had both my computer and monitor in) but last night after hours of inactivity the monitor had the screen saver on but didn't got to sleep. I then put in to sleep but when I got up this morning I couldn't wake it up. When I got my new computer (3 days ago) I didn't migraite any of my old stuff. I have been slowly reinstalling all my software and updated anything before I install anything else as an added attempt to not have any bad files. I have 2 gig of ram and 500 hd with the 7300 card. I am at a lost I checked and rechecked all my setting. The only other thing I have connected is my airport extreme base.
Any idea's anyone?
Ops one last issue, I have blown my apartment circut breaker three time while attempting to start the new PM and once it did it when I was trying to wake it just by tapping the space bar. Is it the computer being more power hunger?
Mac OS X (10.4.8)

Serious display issues with Mac Pro

Hello
I have a 5 or 6 years old Mac Pro G5 with a ATI Radeon 9600 XT video card. I have a lot of problem properly connecting a display to that computer. Here is a small list of all the irregularities I witnessed :
- When I connect an Apple Studio Display, the computer detect two displays (when looking at the display preference, one is labeled "VGA Display" and another labeled "Color LCD"), both at the same resolution and working as a two screens setup (as seen with Space) when not mirrored
- I can't have the computer working with an Apple Cinema Display. The computer will not boot with that screen plugged in. The normal loading screen appeared, then just before the login screen, it goes black and eventually the computer stop.
- The screen stay black when I connected it while the computer is running.
- I have a couple of those G5, so I tried switching the video card with a working one (same model), and it didn't change anything to the screen problem.
I guess it sums up all the symptoms I can see. If anyone as a suggestion on what might be the problem, it will be greatly appreciated.
Thanks

You really should post this in the PowerMac forum, since it's a G5 and not a Mac Pro. All the Mac Pros are intel based.

Nvidea GeForce 7300 GT and ati hd 5870 issues with mac pro and dual monitors etc

I have a mac pro 1,1 running 10.5.8
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          2
Total Number Of Cores:          4
L2 Cache (per processor):          4 MB
Memory:          8 GB
Bus Speed:          1.33 GHz
I installed an ati 5870 and fcp 7 wont run, it says no vram. so I reinstalled the NVIDIA GeForce 7300 GT. This card however doesnt support my 46" sony bravia client monitor via vdi to hdmi (with adapter) is there anyway to make it do that (patch, driver, tweek to card)? also what other card should I get that will support the 30" apple display and the sony. I have another system luckily thats newer that I work on with clients, but I dont want to foresake the other mac pro yet. is the 5770 going to work? Please let me know what you think, I greatly appreciate it. Also my system profile doesnt say I have pci express 2.0 on either my old or new mac pros.
why are there no patches for this card, updates, drivers? nada. let me know. thank you.

*Is it possible to run the factory NVIDIA 7300 GT side-by-side with an ATI Radeon HD 4870 to achieve a three monitor setup?*
Yes with OSX. There may be problems with Boot Camp.

Any Issues With MacBook Pro Software Update 1.2?

Just wondered if there were any problems with the newest update and Tiger.
frank

Probably a bit late for this to be helpful to you, but after I installed the update I can't play Civilization 4 anymore.
And here I was so excited about updated graphics drivers!
I've contacted Aspyr... I'm sure someone will eventually fix whatever has gone wrong.

Any issues with Premiere Pro CC and Avid Media Composer on same system?

Hi all:
Searched around for this but couldn't find similar question.
Am a long time Premiere Pro user, but have something coming up where I'm having to use Avid MC to collaborate with a staff editor for the duration of the job. Am wondering if I should expect any conflicts or issues to installing both Premiere Pro CC and Media Composer on the same system? Any insight would be most welcome.
Running Adobe CC on a Windows 7 HP Z820, Dual Xeon Processors, 128Gb RAM.
Thanks!

hi Jim,
well it turns out that Premiere update 7.2.2. put my computer into disarray, and caused my multi-camera monitor to lag (about 6 seconds) behind my program monitor .. so my my multi-cam monitor (with my 2 or 3 camera feeds) would be playing footage that is 6 seconds or so BEHIND what was playing on the program monitor.
that's the gist of it..
anyway the fine folks at Adobe, talked me through the process of going back to premiere 7.2.0 and that fixed the issue.
i hope future updates resolve this issue so that i can get back up to the minute on my software
thanks
jahZ

TS3048 Apple bluetooth keyboard issues with mac pro

Hi,
I have been using my keyboard with my mac for a while, but today I reopened the laptop and the keboard, had to pair the keyboard again because I started the computer before the device, the computer showed that the keyboard is connected and paired, but when I try to push the buttons(typing) nothing happens. Can any body help?

Could you use the camera icon to post a screenshot here of what you are seeing? Exactly which Hangul keyboard layout from Apple are you using?
When you talk about the "virtual keyboard", are you referring to the Keyboard Viewer?
OS X Yosemite: Use the Keyboard Viewer

Intel 320 160gb SSD any issues with mac pro 2008?

Similar Messages

Maybe you are looking for