Inter company PO is not pulling the valuation price from Material Master

Hi Experts,
We have a scenario, Inter-company PO with pricing procedure which pulls Material Price from Material Master (Std Price), similar to intra company PO
Even after maintaining the std price in the supplying plant , system is not pulling the Valuation price from Material master only for a particular Material
I checked the Plant level attributes ( for ex: Plant Mat status, client level status and everything looks fine )
Could you guys please mention what would be the issue ?
Thanks in advance
Illayaraja

Hi,
Is there a routine which pulls the value? then you need debug with ABAP help for that routine where its failing to pull
Thanks
Diwakar

Similar Messages

  • Can not change the ABC indicator in Material master MRP1 View?

    Hi All,
    I could not change the ABC indicator in Material master for material X. Could some one please specify the condition or prerquisit for making chnages in ABC indicator?

    Hi Animesh,
    In Logistics Information system , ABC analysis can being done  and results updated in Material master for ABC indicator by background job run.
    The relevant transaction is MC40  ( Total Analysis) .
    This transaction when run in backgroung with field "Update ABC Ind.in background processing mode" clicked, will update the ABC indicator appropriately.
    You can find different criteria based on which A, B,C is decided.
    I hope this will be useful to you.
    Please check and confirm.
    Regards
    Datta

  • System is picking the previous price in material master

    Dear all,
                    We are purchasing the halb material with price control S. Initial stock upload v hav uploaded with one price after that uploaded the stock. then created some po and grn also made those po's/. now we found that that std price was wrong, then manualy maintain the new price in MR21. Here quality also available so we are did return delivery and once again did the GRN. now also system is picking the previous price only. Pls help me to sortout this issue.

    Check the P.O , price. It also need to be changed.
    If you have done GR cancel it. and change the P.O price through ME22N and try to post again.

  • Zen Reporting Infoview not pulling the inventory info I want

    I am trying to pull some useful Inventory information from the managed devices but the Report generated does not CONTAINS all the information I needed or at least not pulling the right information from the Managed devices (agents are installed) Here is the scoop: Reports -> Zenworks Reporting Server Infoview -> NEW -> Web Intelligence Document -> and here we can see the Universe Pane. The questions what to select to add item to the right pane so that I can generate some report that shows all the Inventoried pc (with agent installed) right now I selected and tried many attributes or items but only show the DNS, IP address and none of the HD, CPU, Serial number and Manufacturer and others on the GENERATED report. Here is the sample of the Reported generated for your review. It only DNS name, Machine name, Platform, machine GUID and the rest are NOT showing which were selected and there are: hard drive size, memory type and size, cpu type, vendor name and so and whole bunge of them.

    jlau168,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • How to change Valuation class in material master(have stock)

    HI,
    I would like to change the valuation class in material master, How to change VC? is there any process before changing VC?
    I heared when Material have nil stock then only it's possible to change VC, Is it correct? which TC can I use for change VC?
    Regards,
    venki

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • Purchase group in Purchase order from creator not from Material Master

    Hi All,
    Can you please help me with the next one?
    Points rewarded.
    In the materialmaster is purchase group 44B entered but
    The default purchase group of the buyer is 55C. Is it possible
    that the value 55C is automaticaly placed in the PO when
    the buyer creates the Purchase order?
    At this moment always the default value from Material
    master is proposed.
    Thank you in advance,
    Eric.

    Hi,
    You have to look at the overall process.
    The idea of the Purchasing Group is to indicate which buyer manages that material in that plant.
    SO when the system (or a user) generates a requisition for that item at that plant, the system then knows who should convert it etc.
    So my question to you would be, "why have you got a default P group in the material master record that is NOT the buyer who manages that item at that plant?"
    If several buyers share a list of materials then just use one P group for the "group" of buyers, instead of separate P groups for each buyer.
    The system doesn't have the option to automatically overwrite the P group on the requisition because this may be someone just "helping out" the buyer who is busy and so it does not mean that the requisition should be changed to be linked to this other P group.
    You already have the field "created by" on the PO and so if you need to report on who created what, then simply use this field instead of P group.
    But the P group on the material master (and therefore the requisition) shoudl ALWAYS be the P group that will convert reqs for this item plant combination.
    Steve B

  • Valuation type in material master

    Dear SAP GURU'S
    please tell me what is a valuation type, it's uses and what are it's setting so that i can get the valuation type in material master.
    thanks and regards.

    Hi Yogesh ,
    Valuation type  is A subdivision of a valuation category in split valuation.
    Example
    An enterprise manages its stocks of a material using the valuation category "Quality", comprising the following valuation types:
    High quality
    Average quality
    Inferior quality
    Valuation category: A criterion for the separate valuation of different stocks of a material managed under one material number for quality and other purpose ...
    If you have any further query on the same then let us know ........
    Thanks
    Kaushik

  • Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

    If you just installed iCloud does that mean you updated the iOS that's running on your iPad?  If so, you'll want to restore all the programs you have from the backup you hopefully made.
    Refer to these articles for help.
    iTunes: Backing up, updating, and restoring iOS software.
    If you don't want to use iCloud, simply don't activate it.
    You can also download the programs again.
    If you live in a country that supports re-downloading apps then you can re-download them.  You can refer to this article for more help.
    Downloading past purchases from the App Store and iTunes Store
    What to know if your country supports downloading past purchases?
    iTunes in the Cloud Availability

  • Folder mapping with Unix XI box / XI is not pulling the file from folder

    We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
    any help appreciated
    Regards,
    Venkat Bomma.

    Well, I had the same problem once but I don't remember exatcly the solution...
    I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
    You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
    Let me know if this helps. In the meantime I will dig in my memory...
    Cheers,
    Alex

  • I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    I want to mirror an iOS device to my computer for demonstration and training purposes.  I cannot use Airserver as my company VPN does not allow the connection.  Is there a hardware solution instead?

    Shoeb, hi.
    Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

  • [svn] 4129: Fix for - the @inheritDoc tag in an ASDoc comment: is not pulling in a comment from UIComponent

    Revision: 4129
    Author: [email protected]
    Date: 2008-11-17 14:57:15 -0800 (Mon, 17 Nov 2008)
    Log Message:
    Fix for - the @inheritDoc tag in an ASDoc comment: is not pulling in a comment from UIComponent
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-18127, SDK-13592
    tests: checkintests
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18127
    http://bugs.adobe.com/jira/browse/SDK-13592
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsClass.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    logged bug:
    Bug No: 5203064 LINE ENDING WITH ';' IN A COMMENT ENDS SQL STATEMENT,LIKE SQLPLUS BUT UNEXPECTED
    Note that:
    SELECT COUNT(*)
    FROM all_objects
    /* WHERE OBJECT_NAME LIKE 'A%';
    WHERE object_name LIKE 'Z%';
    Ends sql statement on the first ';', just like in sqlplus

  • Change the valuation class of material [Stock transport order scenario]

    Dears,
    Client would like to change the valuation class of material.
    There is no open Purchase order/Process order/Purchase requistion and stock in plant.
    Scenario- One Stock transport order is created.
    For same goods issue (351-issuing plant) and goods receipt (101-receiving plant) is done.
    When we are going to change the valuation class of said material, message is "purchase order is open
    and it shows the no of STO [for which receipt and issue is done]"
    To resolve this issue we had first delete the STO line item no(ME22N). Then change the valuation class.
    (this allows). and then undelete the STO line item. Through this we can change the valuation class of material.
    Please advise in such business process that this is right way or there may be other option.
    Thanks & Regards
    Rajan

    rajanshah219,
    Here's my take on how to fix:
    *Manually change Config TCode OMT4 - change message MM 326 & 327 to type "W"   (if open order exists...now you can enter through warning messages)
    *If inventory exists, then issue out of stock to a cost center
    *Change valuation class
    *Put stock back into inventory (reverse to that same cost center)  Note issue out and reverse back into inventory must happen in the same posting period.
    **Valuation class should be changed as expected
    **Manually change config  TCode OMT4 - change message MM 326 & 327 back to type "E"
    Thanks,
    Jason

  • Phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on

    hi,
    phone works great but when on a call proximity sensor kicks in turns off the screen. When I pull the phone away from my head screen is still blank. The force hangup/lock is the only way to bring the screen back on.
    I purchaged it before one month onl. So i wont understand how it comes. Please help me. I am waiting for you reply.

    "Your face is so ugly, it broke your phone!" Ha ha. Get it? How I was joking there? About your iPhone not working correctly after... <sigh>
    But seriously, you said the situation only happens when you have been on a long call, so maybe the iPhone is just autolockng?

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

  • Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

    Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera.  How can I get my files open to view and edit?  I am using LR3, Photoshop CS3 and Bridge CS3.  Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
    When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file"  ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
    When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
    When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
    Please help!!!

    Unless I missed an announcement, today, LR6 isn't available, yet, right?  Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
    LR5 is available as a standalone version.
    PS-CS6 is available as a serial-number-licensed version.
    PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
    Bridge is part of PS, not a separate program.
    LR5 standalone and LR+PS-CC plan are both available on this page:  http://www.adobe.com/products/catalog/software.html
    PS-CS6 can be found on this page:  Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
    As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

Maybe you are looking for

  • How do I get rid of "Savekeep" on a mac

    How do I get rid of "Savekeep" on a mac

  • Outstanding MIS Report Problem.

    Hi, We need to generate report only current financial (transactions) year report no need to show previous financial year entries and also if we raised receipts in current financial year against the previous financial years bills also no need to show

  • Scheduling in Ora Apps

    Hi, I have a requirement where in the third party will enqueue the data to the queue. I want that in Oracle Apps, the data should be read as soon enqueued into the queue. I have written a procedure to dequeue the data but dont know how to trigger it.

  • I can't set up my auto-pay directly to my bank account.

    I have a prepaid phone which has the option of setting up auto-pay.  However, when I tried to set up auto-pay (on the phone and online), it only gives me the option of using a credit card -when what I want is to hook it up to my checking account.  I

  • Desktop Manager 5.0.1 crashes on startup

    I installed the Desktop Manager 5.0.1 off the CD that came with my new Blackberry Bold 9700, after first using Windows Control Panel > Add/Remove Programs to remove the Desktop Manager 4.6 that I had previously installed with my old device. After ins