Interactive form is not showing data during design time

Hello,
I have created a interactive form to display PDF. It is of 12 page. I created and checked in the code to DTR but now when I checked out the DC and and edited the interactive form for further update it is not showing any thing in the design time,showing only one blank page. However if I build and run that checked out project it is showing the proper data at runtime, so now i am unable to update the pdf.
Please help and let me know what to do.

Hi Timo,
Sorry for the late response and not specifying more in detail.
My Jdeveloper version is 11.1.1.6 R1. When I ran for the first time, it was working fine. Then later on, when I was running it was opening completely blank screen.
I thought it is something to do with the permission to the task flow. I have opened web.xml and jazn-data.xml file to check and closed without tweaking these files.
Now, I was not able to open the page in the designer also. It was just showing hierarchy of all the components.
I copied the backup again and it worked. What could be the reason so that I can avoid doing this in future?
Is this related to Jdeveloper bug as I have seen on other forums highlighting this issue.

Similar Messages

Submit button on Adobe Interactive form does not send data back to ABAP

The integration of my ABAP View and Adobe works fine getting data into the form. The form is interactive and I am able to change the data. I am using ZCI and the XML Context. I display the FirstName attribute both on the ABAP View, and the Adobe Form. When I press the SUBMIT button the first time, it disables that button, but the ABAP View is not updated. I have an ONACTION event, but it doesn't get triggered at all.
Here are my specs:
Adobe Reader 8.1.1. Local
Adobe LiveCycle Designer 8.01.3250.1.491864
NetWeaver 7.0 SP19
HR Support Pack 48 and Enhancement Pack 2

Hi all,
I assume the ZCI script included in the form (800.20070410093956.383622.376748 ) is too old (I guess it's from SP13 or14).
In general, I propose the following to analyze/fix these kind of problems (Web Dynpro ABAP only):
1. Check the tracefile (available from SAP NetWeaver 700 SP19): Add "&sap-wd-clientDebug=X" to the application URL and open the trace by typing <CTRL><ALT><SHIFT>T (see note 999998 too):
-> Watch for an entry "Got a message from Adobe Reader: zciReady 1: 2: 3:". If this line doesn't appear => ZCI script too old, go on with step 2
-> Watch for an entry "Got a message from Adobe Reader: zciVersion 1: 800....". That's the version of the ZCI script included in the form
-> Watch for entries containing "sendDataToServer" and "responseFromServer": If you can't find these entries, something went wrong transferring the form data to the ABAP server: Watch out for entries containing "Error", there might be a network problem.
2. Execute report FP_PDF_TEST_00 to find out the used ADS version: The corresponding ADS version of SP19 is 800.20090130093518.519793 or 800.20090608122643.560369 (look at the second part of the version string. It's a timestamp: The ZCI script included in the form is from April 2007, the ADS version of SP19 is from January/June 2009!
-> Update the ADS or patch the ADS (see notes 999998, 1229392 and 956074)
3. optional step: Have a look at note 999998, section "related notes" (this is the complete list of available notes for Web Dynpro ABAP Interactive Forms integration): Install all notes available for your release/SP - or even better: Update SAP NetWeaver (SAP_BASIS) to the latest available SP
4. Update the ZCI script of the form using transaction SFP_ZCI_UPDATE
5. Repeat step 1, I'm pretty sure that it will work now!
Regards,
Ralf

Layout Editor is not rendering widgets during Design time

Hi,
I am new in ADF development and my page has suddenly stop rendering in Design Tab. Initially, when I was running unbounded task flow, it is just showing a blank page.
Can anybody help me in resolving this issue? I have seen Franks note on PhaseListener. I would appreciate if some one can guide me with the detailed class and how to create the same.
Parvez

Hi Timo,
Sorry for the late response and not specifying more in detail.
My Jdeveloper version is 11.1.1.6 R1. When I ran for the first time, it was working fine. Then later on, when I was running it was opening completely blank screen.
I thought it is something to do with the permission to the task flow. I have opened web.xml and jazn-data.xml file to check and closed without tweaking these files.
Now, I was not able to open the page in the designer also. It was just showing hierarchy of all the components.
I copied the backup again and it worked. What could be the reason so that I can avoid doing this in future?
Is this related to Jdeveloper bug as I have seen on other forums highlighting this issue.

When using designer the form will not show up.

When I activate the form designer to make it interactive, it will not show the form except momentatily. Is ther a way to turn it up?

David,
I responded to the forum but could not figure how to send attachments to you there. This is another try .
I scanned a form to PDF that I want to, make interactive and fillable. In Adobe Acrobat 7 I clicked on Advanced > Forms> Make form Fillable in Adobe Design. The results is a conversion to an unreadable Form. Checking the PDF preview tab does not help. Attached are the Form and the enteractive form.
Is there any suggestions as to what I am doing wrong?
Ed Walsh

Adobe Interactive forms are not editable following an EHP6 upgrade, how do we correct this?

Good day,
We are currently going through an upgrade to EHP6. We have set up a test parallel environment that was copied from prod and applied EHP6 for a compare.
During our initial tests, we have found that Adobe interactive forms are not loading properly following the upgrade. 11 out of the 13 interactive forms currently implemented in the portal are no longer editable. When you go to select a value from the drop-downs or input a value in the field the fields remain blank. This is a high priority as all users perform their PA actions via MSS and through workflow approvals using Abode interactive forms.
Does anyone have any ideas of how to fix this issue or have come across this issue before?
Thanks in advance,
Christine

Hi Christine,
maybe a restart of the ADS-Server helps you out. I can remember a similar case where the restart helped.
IF not, check if you got the latest patch of the ADS, maybe the upgrade of the erp causes this error, because it pass now more data to the ads than before.
IT's just a suggest. Let us know, if that helped you out.
Regards
Florian

PLD Report does not show data from Query

Hello,
SAP b1 9.0 PL08 on MSSQL 2008 and I get data on the query, but when the PLD prints, it shows nothing. Is there a way to filter the data that the PLD shows? Does PLD have its own SQL script it uses b/c its not showing data from the query.
Thanks,
Nick

Hi Nicholas,
Please check below links.
query based print layout design
Print Layout Designer \Custom Reports
How to Make a Print Layout (PLD) Report from a SBO Query | SBOnotes.com
http://www.tegrous.com/wp-content/uploads/2011/07/HowTo_QPrintLs_88.pdf
Hope this help
Regards::::
Atul Chakraborty

Discoverer Plus 10gR2 not show data when the script of view have package

Hi my friends.
I have a problem with discoverer plus, I don't know is a problem or I'm doing something wrong.
I have a four views, the views containg in the SELECT stament and WHERE clause packages, example:
SELECT d.price,
d.total,
d.min,
d.mx,
TO_CHAR (SYSDATE, 'q') quarter,
d.fid,
k_xdcd_qry.f_xdc_obt_price (d.prod, d.id) --> package
k_xpxpd_qry.f_xpeds_salary_ca_u (
d.prod,
d.id) xp --> package
FROM px_prices_proc c,
xp_sla_max d,
xmp_sla_puc b
WHERE a.prod = b.prod
AND a.id = b.id
AND a.prod = k_xps_tools.f_obt_prod --> package
When I used the views on discoverer plus for construct the report, when execute the query not show data.
Appreciate it if you could help or tell me I'm doing wrong or does not support Discoverer Plus package execution.

Hi Tux,
This appears to be a grant issue. Apparently, you have granted execute with respect to this package to the EUL owner or the view would not have compiled. If you have not given EUL owner the grant option, I would recommend doing this as well.
This appears to be an Oracle APPS EUL (tell me if I am wrong). If this is the case, it goes without saying that APPS will need to be granted the execute privilege.
Also, by default, a stored package executes with the privileges of its owner. If your custom package was designed this way, are the objects which it references received the appropriate grant? I assume you tested this, but I am concerned that the line, a.prod = k_xps_tools.f_obt_prod, in the where clause could be resulting in the Null set being returned.
Patrick

Why some times jdeveloper does not show a coreect design view ?

Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanks

Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald

PMI Problem (End-to-End Monitor does not show data)

(End-to-End Monitor does not show data)
As I know that XML Messages Alerts T-code: SXMB_NOMI shows all alerts including errors as well I put date Range: 01-01-2008 to 01-08-2008 and filters for "Errors" system does show more then 300 errors
But problem in RWB - End-to-End Monitoring, when I click on display and date range 01-01-2008 to 01-08-2008 its give me graphical overview in right of window
and shows summary:
Errors:                     0 Average
Open                  904 Maximum
Successfully Completed         0 Minimum
Overall:                  904
I thing End-to-End Monitor doesn't get data from PMI...
why does't show any errors, which is shows in SXMB_MONI
Please tell me how to resolve that problem
Thanks in Advanced
Edited by: issue2008 issue on Aug 26, 2008 12:02 PM

Hi,
A destination pointing to the Integration Server is created on the J2EE engine to collect the data for the end-to-end monitoring. If this destination is incorrect or if there are several clients in the system of the integration server, the data may be sent to the incorrect client.
This might be a reason so you can implement the correction of the destination in a manual way as follows:
Open the J2EE visual administrator.
Select the Destination service.
Select the HTTP "pmistore" destination.
Enter the URL for the ICF service spi_gate of the Integration Server in the following form "http://<host>:<port>/sap/bc/spi_gate?sap-client=<xxx>", where 'host' denotes the host of the integration server, 'port' denotes the HTTP port, and xxx is the client of the Integration Server.
Thanks,
Hemant

SAP Interactive Form is not installed

All,
I have installed NWDS 7.0.09. When I click 'Edit' on InteractiveForm component the Adobe LiveCycle Designer does not open.
I did download the Adobe LiveCycle designer Patch 7.0 from service marketplace. But when i try to install the same I get the following error:
<b>This patch cannot be applied because 'SAP Interactive Forms' is not installed on this workstation!</b>
Has anyone seen this error and can anyone advice as to what I need to do to get the Adobe LiveCycle Designer to work.
The message seems to be self explanatory the question then arises how to I load SAP Interactive Forms
SAP Partner

Hi
You have to first install Adobe LiveCycle Designer on your PC to be able to use InteractiveForms component in NWDS (Provided ADS is installed and configured in your landscape, ADS is installed by default in NW2004s installation, we can also have standalone ADS Server).
You can obtain the Adobe LiveCycle Designer 7.1 from https://service.sap.com/swdc -> Installations and Upgrades->SAP NetWeaver->SAP NETWEAVER->SAP NETWEAVER 2004S->Adobe LiveCycle Designer 7.1
Hope this helps!
Thanks & Regards,
Preetha Rethinam
null

UIX form will not refresh data within session

I have some UIX forms to view a table, they displays data fine but when the underling table data changes (from another user session or an update trigger from different table) the forms will not show refreshed data, unless I delete my browser session cookie. Is there a simple way to fix this, and cause data to be reloaded each time its displayed? I'm using JDeveloper 10.1.2
Thanks, Craig Smith
Message was edited by:
user503876
Message was edited by:
user503876

Dear Sir...
in the struts page flow diagram
1- create a data action
2- drag the execute method from the viewobject methods and drop it on the data action
3- draw a page forward from the data action to your data page
4- finally ad a refresh link in your page which links to your data action
now each time you click the refresh button on your page, the execution will go to the data action, where the execute method is executed (the data is refreshed) and then the control goes back to your page.
best regards

"edit" link from report to form does not show values

I created a report and an attached form on two different pages. The report is a query combining two tables with outer joins. When I click on the "edit" button on the report, I get forwarded to the form page.
My problem: When I get forwarded to the forms page, I get an empty form, and not the data from the column as expected. The "edit" button behaves more like the "create" button. Anybody an idea what I could change to be able to edit the column data?
Thank you.

I've met the similar problem with previous releases (1.5.0 and 1.5.1) without any objective reason.
As I suggests, sometimes HTMLDB lost current session state. When this occurs, ALL links from reports to it's forms does not transit primary keys. I've just completed application development and I've met this behaviour every months.
As a workaround I found folowwjing process:
Come into administration tab, selet "Report with option to purge current session state". When I purge current session state and re-login to application, all report-form links will start to work.
I don't know, what is the issue, but I met it so soon on my local HTMLDB environment.

EXCEL out put is not showing data

Hi All,
My report is working fine it is showing data in XML but it is not showing data in Excel output. Excel output is empty.
i have attached excel and xml files. please help me.
FYI: these are migrated reports from 10g to 11g.
Thanks in advance for your time

Using ua.bat we upgraded 10g to 11g., we got sucessfully message.
after upgrade if i try to open excel it is not showing opening and showing action instead of excel name . I though excel out put has corrupted. i downloaded excel layout from 10g and uploaded in 11g report using upload layout.
we did not make any changes in database.
below one is not related to this one but .. after upgraded reports multi parametrs did not work if i select more than one column ( i opened as different topic) then i have removed
( (coalesce(null, :P_PPD_REGION) is null) and kept(region.X_REGION in (:P_PPD_REGION) from following statement then i did report is working with multi parameters.
my doubt is is it correct thing i did ? if not how can my multi parameter will work . we are using oracle as database.
AND ( (coalesce(null, :P_PPD_REGION) is null) or (region.X_REGION in (:P_PPD_REGION)) )
AND ( (coalesce(null, :P_COUNTRY) is null) or (region.REGION_CD in (:P_COUNTRY)) )
AND ( (coalesce(null, :P_SITE_NUM) is null) or (ptcl_site.site_num in (:P_SITE_NUM)) )
I really appreciate for your support.

2lis_03_bf data is not showing data in RSA3

Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in Advance

ODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm

CFGRID does not show data (CF9.0)

Under development server, CFGRID show data , all is fine , correct. (CF9.0 version dev)
Under production server , CFGRID does not show data, only a grey line (like a HR).
How to debug this ?
Thanks,

Kindly check below to troubleshoot this issue:-
Is there any difference between your CF production & developement server setting summary?
Is there any browser script level difference between your both CF server?
Are you getting any relevant logging error in your CF server application.log & exception.log?
Run a very simple cfgrid running app to check, either getting issue with that too or not.

Interactive form is not showing data during design time

Similar Messages

Maybe you are looking for