Interactive Planning question

Hello,
The feature 'Select Time Buckets Profile' which can be selected from the icon 'Period Structure' in Interactive Planning in DP when selected after loading data in the dataview, is being applied to only the future horizon.
I tried to use the next feature from the menu 'Set Time Buckets profile', this too gives option to select only 'TB Profile ID (Future)' and gets applied to future horizon.
Is this a bug in the system or it comes like that. If we want the selected TBP to be applied to both future and past, is there any additional setting we need to do to be able to change the past profile on the fly using this feature?
Thanks,
Tej

Thanks Sunitha for your clarification, its a little surprising that we need to change at the dataview level Only for  the past horizon. Because in production system, a business user might want to do this , but will not be able to do due to security.
It would be good to have this feature usable for past horizon as well.
Guru Charan,
Not necessarily that Business users will not be concerned about knowing past patterns, sometimes it becomes important to analyse history as well , as you rightly said - 'we are much concerned with how the future is getting affected based on the past data.', It becomes important to analyse both history and forecast in the same buckets and therefore need to be using the same profile both for past and future for comparing on same levels. I understand this is not a bug, but you could say its necessary feature which is missing in interactive planning.
Thanks,
Tej

Similar Messages

  • DP_How to lock KF in the interactive Planning table

    Dear Expert!
    I want to lock the data in the Interactive Planning table according to each Key figure and a period of time (that mean I can not change the data of KF after locked). How can I do?
    e.g: I created a Planning book and data view with following Key Figure:
    - Forecast
    - GDP
    - CPI
    - Historical Data
    And the time bucket profile of this planning book as following:
    - Past: 24 months
    - Future: 12months
    Now, I want to lock data of the KF "Forecast" in all past and future; lock data of other KF (GDP, CPI, Historical data) in past period.
    How can I do now!
    I hope to know the question soon. Thanks for your support!
    LeGiang

    Hi LeGiang,
    If you would like to not allow any manual input for ALL the key figures in the past, then the solution for this "history" part would be quite easy.
    When you define the planning view, specify the "input from" date as the current date. This way, no-one would be able to change any data in the past manually.
    The above would also take care of not allowing any manual changes to "Forecast" in the past.
    If however, you want only certain KFs should be non-editable while others should be editable, then you should use the function CELL_INPUT:
    Syntax would be like
    <Macro Name>
       <Step Name>  ( <Maintain 'processing Area'  as 'past'>)
           Cell: <Key Figure Row name>  ( Attributes ) =
              CELL_INPUT(0)
    In above, remember that in <Step> row, you should double-click and change the value of the field 'change scope' to "attributes" from 'values'.
    For the future and past, if you want that Forecast should be non-editable, then you could do this by another macro. Define a default macro that would change the attribute of the KF for Forecast as "no input allowed" for all the time periods. You could do this by using the function ROW_INPUT.
    Your macro would look like -
    <Macro Name>
        <Step Name> : ( 1 Iterations :INITIAL;INITIAL ) 
            Row: <Key Figure name e.g. Forecast> ( Attributes ) =
               ROW_INPUT( 0)
    In the row line above, remember to double click and change the value of the field 'change scope' to "attributes" from 'values'.
    If you need more help, do let me know. This second macro would actually make the whole row non-editable. You could create these macros as a default macro, and have them run in the end after the other default macros.
    Thanks - Pawan

  • Key Figure Display in Interactive Planning

    Hello,
    I am unable to display some of the key figures in  SNP Interactive Planning. All these Key Figures are present in Planning book and are also included in the data view.
    Is there any setting wherein I can control the display of Key figure although that key figure is present in Planning book and data view. For Example I have my "safety stock" key figure in my planning book and data view, but I am unable to see the "safety stock" key figure in SNP interactive planning.
    Would really appreciate your help.
    Thanks,
    Sarath.

    Hi Visu,
    Your answer is really helpful, thanks for that. But while I am trying to hide some key figures it is not allowing me to do so. It is either hiding all the key figures or unhiding all. Please let me know if why the system is behaving like this.
    Thanks

  • Saving data in the Interactive Planning Data

    Hi,
    I want to save data in the interactive Planning and for some key figures it says that the data is saved successfully but the data is not saved when I returne to the Interactive Planning.
    What can it be?
    I have looked for possible causes, but I have not identify it 
    Thanks in advance

    Hi ,
    Are the key figures that you are trying to save data for "auxillary key figures" . If so they will retain their value only till your are in the interactive planning screen , once you back out and come in again you will not be able to see the values that you put earlier. Check that and update me
    Thanks
    Saradha

  • Urgent!!  Error in interactive planning

    Hi Gurus,
                 I am getting error in interactive planning "Invalid data Statues" for some material.
    I am able to run forecast for all the materials other then 10 products.
    Can anyone help me why this error is coming up?
    I checked the data in cube , time series and CVC and everything looks good .
    Please let me know
    Thanks in advance
    Regards,
    Raj

    Hi Gurus,
                I tryed LC consistence check and Planning object consistency and even then i am getting same error "invaild data statues" for some materials.
    Thanks and please let me know if you have any solution.
    Thanks a Lot
    Regards,
    Raj

  • Map functionality in interactive planning using PC MILER instead of IGS

    Dear Experts,
    We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
    The PC MILER is using the customized solution for calculating of  the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
    I have configured all the relevant settings that are  required for using the MAP functionality in interactive planning. However the  VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
    Please advice if anyone came across similar integration issues, or have any insights on this issue?
    Thank you,
    Ramesh.

    Dear Experts,
    We would like to utilize the map functionality in TPVS interactive planning, We have implemented PC MILER for Geo coding instead of IGS and GIS tools.
    The PC MILER is using the customized solution for calculating of  the distances of Geo co-ordinates using the defined precession level.However we would like to utilize MAP functionality in interactive planning through PCMILER. Just FYI PC miler is connected through http connection (RFC connection type G -http) unlike the RFC connection for IGS and GIS.
    I have configured all the relevant settings that are  required for using the MAP functionality in interactive planning. However the  VS optimizer is giving the error message as "no map available ". I also did a test run using the standard map test program, I got a short dump. But the PC MILER connection and other setting seems to correct.
    Please advice if anyone came across similar integration issues, or have any insights on this issue?
    Thank you,
    Ramesh.

  • SAP PP-Single item interactive planning & simulation Mode in MRP

    Hello SAP-Guruu2019s
    Pls tell me the Use of Single item interactive planning & simulation Mode in MRP

    Dear,
    MD43 provide you with interactive planning.
    if you use long term planning and you want to import the
    result of long term planning to productive planning, you can import long term planning result from MD43.
    In the second screen of MD43 (almost same as MD04), go to menu and select edit
    =>Copy simulative LT planned order.
    MD03 does not have interactive mode. So once you kick the MRP from MD03,
    MRP is triggered and save the MRP result automatically.
    I hope this explanation help your understanding.
    Regards,
    R.Brahmankar

  • Setting up headers in interactive planning

    Hi All,
    We adding almost 50 new users to our existing DP setup. We have specific requirement to set headers for specific users. Can anyone tell me how can I setup headers for users?
    I tried using user setting and in that navigation Path (Drill down) but it actually drill down to detail all level when I get into interactive planning. That I do not want.
    I just want to add headers in interactive planning for users.
    Regards,
    Harshil Desai

    Hi harshil,
    Check in this table '/SAPAPO/MSDPHEAD'
    it is self explanatory, by reading the contents of this table you will get some idea/clue.
    Also, seek help of ABAP in uploading the user specific setting details to this table.
    Let me know if it works.
    Thanks,
    Regards,
    Sandeep Kumar.S

  • Interactive Planning area - No plannable

    We just upgraded to SCM 5.0. We are getting errors when running the interactive planning area.
    When we select a single products and try to load into our planning book, we are getting no plannable characteristic combination.  When we select multiple products, the products load. 
    Any ideas on why it works for multiple and not one?

    Here is what we completed to fix our problem.
    Run report /SAPAPO/OM_LC_UPGRADE_50 via TCODE SE38. In section
    C - At End of Upgrade, and perform steps 4 - 7.
    If you run transaction /NRSRV; >All Elementary Tests; >>Database;
    Double-click >>>Check Database Parameter(s)<<<
    ++EXECUTE++
    You will find 2 red lights there.
    ORACLE: Parameter OPTIMIZER_FEATURES_ENABLE is set to value 9.2.0
    (recommended value is 10.x)
    Message no. RSCV527
    This is related to our problem, which is due to a big issue in Oracle
    10.*. You might need to get your Oracle admin involved to change the
    parameters.
    ORACLE: Parameter OPTIMIZER_MODE is set to value CHOOSE(recommended
    value is ALL_ROWS).
    In most cases the /SAPAPO/DELETE_LC_ANCHORS report did not run for the
    affected client during the last LiveCache initialization due to one of
    the following configuration errors:
    /SAPAPO/DELETE_LC_ANCHORS was not entered as post-processing step
    for LiveCache initialization. In LC10 press the pencil button (and the
    administration reports tab if necessary) to check this setting.
    The RFC destination was not set up (correctly) for the affected
    client during LiveCache initialization. See note 305634 for more details

  • Combining scored interactions and questions - navigation settings

    I'm trying to get to grips with the way the Preferences > Quiz > Settings > Requried options work when my quiz combines both scored interactive objects and questions.
    I'm currently using Cp4 but would be interested to know if Cp5 behaves the same.
    Am I right in thinking that the effects of the different options are:
    Optional
    The learner can scrub back and forth with the playbar as much as they like without restrictions.
    Required
    The learner can scrub back and forth without restriction, but only up to the last slide with a scored interaction or question. To get further into the lesson they have to click any one of the previous scored interations, or submit a single question answer (wrong or right).
    Pass Requried
    I couldn't figure this out at all! I set a pass score, had a load of scored interactions and questions, but the learner could scrub right through the slides with scored interactions into later slides that weren't scored. Ah well, good job I'll be using the LMS to manage pass/fail
    Edit: Oh, it looks like this only comes into play if I select 'show score at end of quiz' - you can only ontinue past the results page if you achieve the pass score.
    Answer all
    Learner can scrub to the end of any slide with a scored interaction or question, but to get to the next slide must either click the interaction or submit an answer (right or wrong). And if the next slide also has a scored object, repeat. Once they've 'unlocked' a slide they can scrub out and back into it in the same session.
    Any observations on that?
    Obviously learners won't be able to scrub back if backward movement/review is disallowed.
    Incidentally, I did notice that the point Cp locks the slide seems on 'answer all' to have some very odd properties. If I removed the pause from the click box, or the learner clicks play at the pause, then it carries on into a kind of phantom frame - with no captions or slide background - but the click box still works, if you know where on the screen to aim for!
    Does anyone know a way to modify that locking frame to provide some info for the learner on what they need to do to progress?
    Thanks

    Hi BrightonJon
    For the back movement there is an additional field. "Allow Back Movement" (or close to that)
    Required only mentions that you cannot skip until you have answered
    Pass Required means that you have to answer it correct to continue
    These are about single questions.
    A locking frame often happens at strange places. I have it most often using advanced actions.
    Best TD

  • Avoiding save option POP upin a interactive planning screen

    Hi,
    I have a requirement to avoid the Pop up menu which asks to save changes, when i close the interactive planning table. This save option comes up even though i havent changed any data. So i need to switch off this pop up, if i am not really doing nay changes in the planning table. I just view the data.
    regards
    Karthik

    Hi,
              If you are just viewing, why don't you set the parameter /SAPAPO/SDP94_D_MODE to X in user own data or SU01 - parameters tab. It puts you in display mode by default and when you go to edit mode, it works as usual.
    Checking whether there are any changes and then giving the popup may put extra load on the system...but you can try with BADI /SAPAPO/SDP_INTERACT, method SAFETY_POPUP_EXCLUDE...
    I haven't tried this though.

  • Characteristic restricted DP interactive Planning

    Hi !!!!!
    When I try on my interactive planning, view my table for a object i have a mistake.
    The message is :
    - Superior characteristic 0DIVISION of characteristic ZBGPCUSSL has to be restricted
    - Error reading data - Planning book cannot be processed further
    Any know something about this?
    Thanks

    Are the infobjects ZBGPCUSSL and 0DIVISION compounded? In that case you need to add an additional navigation attribute ZBGPCUSSL_NAV (name it any way you like) to the infoobject ZBGPCUSSL. Then you need to activate it in your planning area. And you will also need to populate the navigation attribute during master data loading of infoobject ZBGPCUSSL.
    Then you can use the new navigation attribute to do the selection.

  • Issue in capturing in transit in SNP interactive planning book

    Hi,
    We are facing issue in capturing in trasit in SNP interactive planning book.
    We are using standard planning area ( 9ASNP02) on which we have build up planning book which is copy of standard planning book. Earlier standard planning area was containing key figure 9AITRAN(in transit)attached to category group (IT1) which contained categories AH, EI.
    As intransit was coming under category CS we added category in category group IT1. After adding it the intransit is not visble in planning book in key figure in transit but when we checking details of cell the value is present with start and end date as 01.01.1970 where as in RRP3 view intransit is present under current date.
    Before additing category CS in IT1 group the intransit was not coming but now after adding category also the in transit is not visible in cell but present in detail view with wrong dates.
    Regards,
    Vrushali.

    HI,
    Stock in transit keyfigure will display only EI orders (incase of VMI
    scenario) and AH orders (if you create inbound delivery).
    If you integrate stock,CS orders only will be available in /sapapo/RRP3.
    The root of the problem is in the setting from Intransit key figure:
    from a planning area management point of view it reflects
    the setting used in the standard SNP planning area  but the customizing
    of the category group used there is different from the one used in
    standard systems.
    Actually you added category CS there. But category CS has a atp category
    type 0, which means stocks actually. In the SNP planning books by design
    stocks are read separately from other orders because  have to be
    considered in the ATD computation.
    Therefore if you need to read orders with category CS you should
    consider it in the category group assigned to the ATD receipts key
    figure and to the stock key figure.
    This customizing could be applied at the planning area level, as
    described above or at the master location level, SNP tab.
    In this case you can specify there the category groups which have to be
    used in order to consider stocks, ATD receipts and ATD issues about all
    products assigned to the used master location. Please refer to the
    related F1 helps in order to get more information about.
    You can get more information at note 591310.
    Regards,
    Sunitha

  • SNP Interactive Planning. Problems for SNP PPM plant

    Hi All
    Can you advise please why SNP interactive planning does not create SNP planned order when there are SNP and PP/DS related PPMs together.
    And once i delete SNP PPM, SNP interactive planning creates SNP Planned Order without any problems.
    Once i again create SNP PPM and run SNP interactive planning- it does not create planned order to fullfill demand.
    Thanks
    Best Regards
    Andrey

    Hi Nandha
    Thanks! You solved a problem. PPM had maximum/minumum lot size 100 while in product master in Quantity determination max/min lot size fields were empty.
    I've added the same values to product master as in PPM and run again SNP interactive planning.
    And planned order was created.
    Thanks!
    Best Regards
    Andrey

  • Office365 Plan Question

    Hi,
    We qualify as a non-profit for the E1 and E3 plans. We have seasonal staff of which we would like to have access to the E1 plan only and then full time staff of which we would like to have on the E3 plans. Is it possible to split a user base amongst two
    plans on the same account and email domain?
    Thanks,
    Andy Pe

    Hi Andy,
    Don is right that you might need to post your question in the dedicated forum of
    Office 365 Community.
    This is because that current forum only focuses on questions and feedback for
    Microsoft Office client. There is not so much about Office 365 Plans/Services aspects here:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • Purge Concurrent Request and/or Manager Data program:

    Hi Friends, I am purging all my test report output logs using the above program, but the table FND_CONC_PP_ACTIONS is not being deleted; SQL> select count (*) from FND_CONC_PP_ACTIONS; COUNT(*) 9470 FND_CONC_PP_ACTIONS Stores the post request process

  • Problem Invoking a EBIZ webservice from ABC Service

    Hi, I need to invoke a webservice of EBIZ in a ABC Service.For that I created a partner link of the webservice and created the properties wsseHeaders,wsseUsername,wssePassword in the partnerlink for ebiz service call and I also have this properties d

  • Output video to Portrait Display

    We're trying to use an iPad that's mounted in a stand locked in portrait mode in an installation. We're mirroring the video to two displays that we'd like to set up as portrait as well, so that we can take full advantage of the size of the screen ins

  • Can I change a field that is displayed on a Purchase Order Message Output

    I have read on a couple message threads that have stated that it is not recommended to change the length of a field on a purchase order.  If I am unable to  change a field length, can I instead use another field that is long enough to fit in the info

  • ITunes store errors after switching to new computer

    I am in process of moving everything from one Mac to another. I'm doing it by hand so I don't carry along all the old cruft left behind by programs that I deleted long ago. I've done this before without problems, but this time iTunes is giving me som