Interactive Reports: Can values for 2nd filter be limited by first filter?

Hi,
I have a question for the inbuilt filter tool of interactive reports in apex 4.0.2.00.07. Let's assume my IR data looks like:
Col1:*Col2*
A:1
A:2
B:3
If I click on the header of Col1 I will be presented with filter possibilities "A" and "B" and can e.g. set a filter to Col1=A which leaves me with the following view
Col1:*Col2*
A:1
A:2
Now, if I click on the heading of Col2 to set another filter, I can still select value "3" as well.
In some cases it would be nice if for any additional filter only those filter values were presented which are still relevant and allow further narrowing of results (like something in the way of LOV cascading). I.e. in our example only "1" and "2", omitting "3". Is there a way to do this?
Best regards,
Martin
Edited by: MBK on Sep 27, 2011 5:35 PM
Edited by: MBK on Sep 27, 2011 5:37 PM

Praise goes to Anthony Rayner_ (http://anthonyrayner.blogspot.com/) for a very instructive blog and smooth example applications.
Anyway, found out what the problem is: Some of my columns are derived from LOVs. In the column 'Report properties > List of Values > Column filter type' my default was 'Use defined list of values to filter exact match', so always all lov entries are available as filters. With e.g. 'Default based on Column type', the application now actually only states values present in the current (potentially pre-filtered) view.
I guess sometimes it is easy... :-/
Thanks for the help offered. Nice to see this forum working so smoothly
BR,
Martin

Similar Messages

  • Saved Interactive reports options display for all users

    Hello,
    For now I build once again my apex apllications in Apex 4.0
    I created a user. In the apex administration this user is not an administrator and not a developper either.
    However the saved interactive report options display for him too, so he can choose the look of the default report, etc...
    Is that a bug ?? Or did I forget something ?
    Thanks !
    Fanny

    Fanny, as long as you are logged in as a developer in apex you will be able to save the report as the standard report, no matter with what user you are logged into your application.
    Paul

  • Passing Interactive report item values to flash chart.

    Hello,
    I am trying to pass an interactive report item value to a 2D column chart type in the chart query as :IR_EMPNO but the item value comes as null and the chart does not show any data. when I am passing this value to another form item and referencing it in the chart query as :P2_EMPNO, it works fine!! have anyone encountered such problem? Please help.
    Regards.

    Thank you Varad...
    Unfortunately, I am still getting no data found. (and there IS data).
    a) Do you mean in the link column section of the report attributes? that is done: item 1 name= IR_P2_FID, value = #FID#
    b) Do you mean my changing my hidden page item to ir_p2_fid with its source value as #FID# ? also done.
    Do I need this hidden item?, and if not how do I refer to link in the where clause of the called page's sql region?
    3) Where Fishery_id = :IR_P2_FID
    Where Fishery_id = &IR_P2_FID
    Thanks again!
    Pamela

  • How to enable detail view interactive report as default for public user?

    Hello all,
    I'm currently developing a search results page.
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    all worked well and looked neat but however when i pass value from my search page using IR_ROWFILTER and clear the results page using page_no,RIR, it brings me to the interactive reports result page with the default table like view.
    i have to press the detail view to get it. i tried saving it as default but it wont work. this issue is for public user.
    if i make the page requires authentication, and save the detail view as default i would not have any problem. i could search and it will straightly bring to the detail view of the search page.
    of course the other reason i found is because im using the IR_ROWFILTER and clearing page using page_no,RIR..without it,it works well but i need it coz im doing a a search result. i need to send search text from another page and put it in the filter in the search page. i would need to use RIR to clear it for searching again.
    is this a limitation for public user? it doesnt happened for authenticated user though..
    how can i make this view as default for public user?

    T101_cyberdyne wrote:
    how can i make this view as default for public user?
    Flip the report into Detail view on page load using an Page Load dynamic action with the following Execute JavaScript Code true action:
    gReport.data.view('DETAIL');
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    Do you really need this to be an IR? Other than the detail layout, do you require any of the interactive features? If not, try using a standard report with a custom report template.

  • Interactive report: Can I exclude a particular column from single row view?

    Hi -- I posted on this yesterday (Possible to exclude interactive report column from single row display?
    a bit anxious for suggestions, I guess!
    I've added a column with edit-link functionality to my interactive report query (that is, the link
    is not attached to the database data... it's an additional column and shows an icon). It's also
    in addition to the default single row view link. (We need both.)
    Unfortunately, the Edit link column shows up in the single row view. I've pared it down as much
    as I can: the label is empty, and the null value shows as "-". But an extra row with "-" is pretty
    ugly. Is there a way to always, completely exclude this column from the single row view?
    I know I could put the edit link on a data column, but:
    1) I want the link to always be to the left of the data (and the user can re-order columns)
    2) when the user doesn't have edit privileges, the link will need to be disabled or just not
    be displayed, and I think that would be a problem if the link were on the data. (true?)
    Thanks,
    Carol

    Please disregard this thread, and the one it refers back to. I see a flaw in the design of what I was attempting to do! Creating the link for Editing as a column means the user could inadvertently not display it, or move it, or... any number of problematic scenarios.
    Thanks,
    Carol

  • CNET Reports: iCloud our for 2nd Day....

    http://reviews.cnet.com/8301-13727_7-57511311-263/icloud-outage-affecting-users- for-two-days-running/
    Here is an article I found on Cnet, that reports iCloud being down for 2nd day, with no explanation of why, or when it will be back up.
    I am posting this so you won't think it's YOUR computer.

    Praise goes to Anthony Rayner_ (http://anthonyrayner.blogspot.com/) for a very instructive blog and smooth example applications.
    Anyway, found out what the problem is: Some of my columns are derived from LOVs. In the column 'Report properties > List of Values > Column filter type' my default was 'Use defined list of values to filter exact match', so always all lov entries are available as filters. With e.g. 'Default based on Column type', the application now actually only states values present in the current (potentially pre-filtered) view.
    I guess sometimes it is easy... :-/
    Thanks for the help offered. Nice to see this forum working so smoothly
    BR,
    Martin

  • Incorrect initial value for char 0FISCYEAR in i_t_range in DTP filter prog

    Gurus
    I need your help , I have searched all the threads but could not find anything which can help me resolve this issue.
    I have a filter in DTP as a routine to get the year from system date.
    The program is correct for syntex but when I trigger the DTP I am getting the following message , not sure what needs to be added to my programe.
    Incorrect initial value for characteristic 0FISCYEAR in i_t_range
    Message no. DBMAN889
    appreciate any help I can get to reoslve this ASAP.
    Thanks in advance

    Hi
    Pleae check if you have initialised with a NULL value . "blank/null" is indeed not a valid characteristic value for fiscal period. Fisc.per is of type NUMC which means all characters have to be numerical. The initial value should be "0000000" .
    Thanks,
    Rajesh.
    Please provide points to answers if you find them helpful

  • How do I set an Apex mulri-row reports form value for the specifc current row using Javascript?

    I have a multi-row region based on a table in which I have two particular columns of interest.  The first has an LOV defined for which I have set up a pick-list of codes associated with the item's status as "OK" or having some problem, for which there are a small number of set codes associated.  Most rows will be OK, but when there is a problem, the pick-list will be used.
    When that pick list has been used, there is an optional "comments" column that can be filled in.  I want my screen to dynamically enable/disable a pushbutton that links to the comment based on the code.  This being row-based, the push-button needs enabling or disabling by row, not as a whole "conditional column".  That bit is ok, I think, but I don't know and can't find the syntax for how within the javascript onchange function I set the current row value for a different column to the one that triggered it.
    My header function (that doesn't work) is going to be something like this (where the status column LOV having a value = 6 means "OK").  Note I'm using alert for a debug mechamism.  The $s line is my failed attempt to set he column value, here with a hard-coded string "Changed COMMENTS":
    <script type="text/javascript">
    function doActivateButton(object)
      if(parseInt(object.value)!='6')
        alert('It is not 6!');
        $s('#COMMENTS','Changed COMMENTS','Changed COMMENTS',TRUE);
      else
        alert('It is 6, you know!');
    </script>
    Ideally, I want any existing comments blanked if the user picks "OK" (6) as the new status, whereas for debug above I'm setting the hardcoded debug string.  You will probably also note I realise I haven't properly understood the purpose of the third parameter in the $s API.
    (This is a reports region, by the way.  A detail block, in forms-speak, with a header block above it.)
    Thanks for any assistance.
    Mark

    Sorry, versions are: Apex 4.1 on Oracle RDBMS 11.2.

  • Interactive Report & Item Value in Page 0

    Hi,
    Is it true that Interactive Report query couldn't read item value from Page 0?
    I have this Interactive Report region using the :P0_EMP_SEQ in the where CLAUSE, i found out that the value is always blank/NULL.
    I created a normal Report region to test the SQL, I can see records being returned.
    Cheers,
    -Joel

    Hi,
    When you are on page 32, check that there is value on page 34 item session state
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/concept_ses.htm#sthref100
    Regards,
    Jari

  • Interactive Reports - Database Hack for sharing developer saved reports

    Just this morning I posted to another thread about not being able to create and save multiple reports, but after a bit of database hacking, I've got it working in version 3.1.2.
    I take no responsibility in anything that may happen to your APEX install because of what I am about to tell you.  If you try this, you do so at your own risk.
    That's right, you CAN create multiple default views for your users.
    Background:
    <ul><li>     I created 1 interactive report.</li>
    <li>     I added criteria and saved the report with the name Report1.</li>
    <li>I modified the criteria and saved the report with a new name 3 additional times.</li>
    <li>I am now seeing 5 tabs
    <ul><li>Working Report</li>
    <li>Report1</li>
    <li>Report2</li>
    <li>Report3</li>
    <li>Report4</li>
    </ul>
    </li>
    <li>At this point, other users can not see the reports because they are private to me.</li>
    </ul>
    So, how can I make these reports public to other users?
    <ul><li>Logon to your APEX database as a user that has privileges to select and update the WWV_FLOW_WORKSHEET_RPTS table.</li>
    <li>Browse the table and find the 4 rows of the new reports that were created above.</li>
    <li>Set the SESSION_ID and BASE_REPORT_ID columns to NULL</li>
    <li>Set the APPLICTION_USER column to 'APXWS_DEFAULT'</li>
    <li>Set the STATUS column to 'PUBLIC'</li>
    <li>Set the IS_DEFAULT column to 'Y'</li>
    </ul>
    It seems to be the combination of APPLICATION_USER and IS_DEFAULT that really makes it work, but I set the other fields to make them look like the row for the working report.
    So, now after making these changes, I had two other users login to the site and look at the interactive report, and viola, 5 default tabbed reports!
    Hope this helps someone!!!
    Kris

    Hello,
    Just to stress, that the moment you do direct modifications to WWV_FLOW_WORKSHEET_RPTS (or indeed any 'internal' table) via this non-supported route you are probably making your APEX installation non-supported by Oracle (hopefully someone from Oracle can speaking officially on that).
    Even if your update works today, tomorrow, in a months time, you have still done something that you were not supposed to do.
    So, do you really want to do that in production?
    Just playing Devils Advocate.
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • Report asset values for segment?

    Hi all,
    so I have been trying to see if it is possible to get a list of all assets but grouped by segment. At the moment, during posting the system knows which segment to post to according to cost center. Also, according to cost center, it is easy to get all assets grouped by profit centers. That is done by creating a new sort variant. But when I want to do that also for segment I can not find a segment field? I read through numerous posts here, notes, help, but could not find how to do it. Some help suggests to "Activate segment reporting" in customizing, but I can not find that option at all? I tried checking field status variants to see if this field is suppressed somehow, but it is not. I tried with activating account assignment objects but there also segment field does not exist.
    Any ideas?
    Thank you!
    D.

    Hi ,
    First and foremost thing that if we are talking of Segment wise report then in that case following possibilty has to be there :
    1. Relevant entries in ANLZ should be there with a value in the field SEGMENT .
    2. Using the T code OAVI you can make you own sort varient where in you can select ANLAV - SEGMENT as sort level .
    3. By making the settings as mentioned above , you can use various reports like S_ALR_870* with your sort varient for achieving your requirement .
    Hope this helps .
    Regards ,
    Dewang T.

  • Need help on interactive report parameter value based on  a sequence

    At a press of a button..
    i have a form where i insert data in a table .a unique number is generated via sequence.
    And then a report is called .. all at the press of the same button
    Now i need to make a query such that
    select * from table_name where no1 = (select d_table_name_seq.currval from dual);
    Such statement is not possible in apex..
    So what should i do ..Use page_items
    How can i store the sequence value in a page item
    Edited by: susf on Nov 29, 2012 6:32 AM

    ok solved..using apex application item thanks

  • What the new update i can use for 2nd gen ipod touch

    well this is kinda stupid i cant update my ipod 2nd gen and i want to buy minecraft PE but i need a newer update what should i do?

    Buy a newer iPod. No, it's not stupid, iPod touch 2nd gen can only go up to 4.2 due to hardware restrictions.

  • Capturing Interactive Report Filter Fields

    I've a requirement where in a user can view data, apply filters to it, and then invoke an Oracle API by passing in the data set currently visible on the report.
    If I can some how capture currently applied filters on an Interactive report, I should be able to recreate the same data on the server side before calling the Oracle API.
    Is there a way to capture these Filter field out of the Interactive report?
    Thanks,
    Shikhar

    Thanks again Jari.
    I compiled Stew's package and setup a call like this:
    DECLARE
       v_variable   VARCHAR2 (5000);
    BEGIN
           v_variable := apex_ir_query.IR_QUERY_WHERE (app_id_in => 125,
                                        page_id_in => 2,
                                        session_id_in => 1058992121588043,
                                        base_report_id_in => 6902307847490674);
       DBMS_OUTPUT.PUT_LINE ('Query: ' || v_variable);
    EXCEPTION
       WHEN OTHERS
       THEN
          DBMS_OUTPUT.PUT_LINE ('Exception :' || SQLERRM);
    END;But this didn't return anything. Did some digging and ran the SQL below:
       SELECT * FROM apex_application_page_ir_cond cond where application_id = 125Which revealed interactive report id values different from the ones returned by $v('apexir_REPORT_ID'); $v('apexir_REPORT_ID') returns 6902307847490674 but in the table its 7.76121620735057E15 (My Apex version is 3.2).
    I'm not going to pursue it further, as I've decided to implement custom filtering functionality using ape_util.ir_query package. Thanks for your valuable help with this issue. Closing the question.
    Edited by: user4368002 on Jul 16, 2010 2:00 PM

  • Can I link from Interactive report Page 1 to Master Detail page 2?

    Hi folks-
    I know how to create a Page as an Interactive Report; it creates 2 pages automatically (primary page with the great interactive bar) and a 2nd page that's a single record.
    I know how to create a Page as Master Detail, whereby I get a tabular list without the super interactive bar, and I can select a record, and get transported to a nice page with 2 regions (master on top, detail on bottom).
    I want to have the First page from the Interactive Report, select the record, and go to the 2nd page of a MasterDetail.
    Do I create the Interactive Report, and customize the 2nd page, to add a region?
    Or, do I create both page types, and redirect from the 1st page of the Interactive Report to the DML Form from the MD report? I tried that, re-assigning the link from the Interactive Report to be a Link to Custom Target, and specify the page # of the Master-Detail page. And it is taking me to the right page, but the data from the selected row is not coming with me, and the detail in the bottom region is not appearing at all.
    Can someone please give me a nudge as to the sequence I should be doing?
    (As you can tell, I'm new to Apex.... I'm trying to use it to create a prototype or proof-of-concept for a database driven web application)
    Thank you
    Marion

    Yes, I tried that after I wrote to you - and it's fine, but not what I'm after; it's only based on 1 table and I'm working with 2 tables.
    Perhaps I can explain in better.
    I want one page as an interactive tabular report (of the master records)
    I want to select a row, and transfer to a page that has the corresponding row on top (as a form), and a tabular region below of records from a related detail table.
    ie, I want page 1 from the Interactive Report, and page 2 of the Master Detail report.
    OK - I just took the form page, and added a region below in a tabular report. And I'm getting the data, but I'm getting all the records (not just the ones associated with the single record on top. I figure I need to edit the Region Definition->Source (to specify that the id numbers need to match), but the code is not editable.....
    So I am in Structured Query Attributes, and I've Modified the Join Conditions - but I still get all the detail records in the bottom region. I''m trying to add in the ( + ) qualifier, but it doesn't affect anything...
    I'm soo close to what i'm trying to do!
    Thank you for your continued patience and assistance
    Marion
    here's the Source I have for the region..... (I'm including the excess ID columns just for learning purposes)
    SELECT
    "PHONENUMBERS"."PHONE_ENTITY_ID" "PHONE_ENTITY_ID",
    "ENTITIES"."ENTITY_ID" "ENTITY_ID",
    "ENTITIES"."FIRSTNAME" "FIRSTNAME",
    "ENTITIES"."LASTNAME" "LASTNAME",
    "ENTITIES"."COMPANY" "COMPANY",
    "PHONENUMBERS"."PHONE_ID" "PHONE_ID",
    "PHONENUMBERS"."PHONETYPE" "PHONETYPE",
    "PHONENUMBERS"."PHONENUMBER" "PHONENUMBER",
    "PHONENUMBERS"."PHONECOMMENT" "PHONECOMMENT"
    FROM
    "PHONENUMBERS",
    "ENTITIES"
    WHERE ENTITIES.ENTITY_ID = PHONENUMBERS.PHONE_ENTITY_ID
    Edited by: mtpaper on Oct 12, 2009 1:30 PM
    Edited by: mtpaper on Oct 12, 2009 1:32 PM

Maybe you are looking for

  • Possible to store different iTunes media in different locations?

    Hi apologies if this question has been raised before, but searching high and low I have not yet been able to find an answer specific to my requirements. I would like to prevent the disk space of my MBP to be nearly fully consumed by iTunes media file

  • PLEASE HELP Lightroom 5 assertion failed.

    I followed the below fix and still get assertion failed Open Windows Explorer. Go to C:\Users\[your user name]\. Check for the folder named Pictures. If you don't see the folder, create a folder named Pictures under folder C:\Users\[your user name]\.

  • Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

    i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: co

  • Not just a yellow tint!

    my iphone 3g screen has a brighter yellow light on the right side of the screen(top right corner to bottom right corner) it's like a column of yellow light and it only appears over black backgrounds.... is it normal??

  • Case Condition not working

    I am trying to create a calculation based on the following case condition. For some reason its working fine on a existing report but now when I am creating a new report based on this, its giving error "Invalid Combinations of Condition and Calculatio