Interest calculation on Open items and cleared items

Dear Experts
I am trying to do needful configuration for interest indicator on which interest can be calculated for open items and cleared items as well.  But,  system is calculating interest for open items properly, but not calculating interest on cleared items with same interest indicator,  I am repeatedly getting error "interest calculation indicator is not compatible with this type of interest calculation"
Is it possible to use same interest indicator for open line items and cleared line items of customer?
If possible, request you share the needful config steps to do same.
points will be awarded for usful reply.
Best regards,
S. Habib Pasha.

Hello Habib,
depending on the requests you can setup a item interest calculation or a balance interest calculation "Define calculation types".
IIC: check settings (item selection, all cleared items, only items with payment, no cleared items) "Prepare item interest calculation"
I guess you have setup the item interest calculation - maybe you have mixed some entries with BAIC.
Check in "Prepare account balance interest calculation" whether you have entries with the indicator you want to use.
At least check your entries in "Define time-based Terms" If you have entries with Balance account interest calculation the system gives even an error.
Hope this is helpfull.
Best regards
   Horst

Similar Messages

  • Doubt about report FBL5N of screen field:Open items and Cleared items

    hi
    i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
    but i don't know to differentiate Open Items and Cleared items in this report.
    Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
    or they must be calc in program ? if true what about calc rules?
    waiting for help! thank you!

    Hi,
    Here is the difference in Open Items and Cleared Items.
    In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
    The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
    Hope this helps.
    ashish
    Message was edited by:
            Ashish Gundawar

  • Display between open items and cleared items in FS10N

    hello all,
    I have the following problem.
    When I go with FS10N with double click on the initial balance of an G/L account I get the message:
    "A large number of line items were selected
    Recommendation: Only display open items
    Do you want to display open items only?
    Yes or NO?"
    If I click yes, I get the open items only and if I click no, I get the cleared items. The strange thing is that I get same line items in both reports. For example, I can see same line item, one time as cleared (when I click no) and one time as open (when I click yes).
    Do you know the reason for this? For both reports I click on initial balance, so key date should be 01.01.2009, if I run FS10N for fiscal year 2009. Right?
    The user is confused in this situation because he is not sure if the item is cleared or not.
    thanks for quick reply!
    Daniel Nicula.

    If you click yes, you get the open items only , but if I click no, you don't get the cleared items only. With NO, you get ALL items.

  • FBL3N-cleared item visible in both open item and cleared item.

    Hi
    We have posted a line item to Bank clearing account-open item.
                            XXXX a/c
                                 To bank clearing account
    Then we posted another entry of reconciliation
                         Bank clearing account
                               To main bank
    The we went to f-03 and cleared the bank clearing account.
    However i could still see both the entries in open item in fbl3n and also in cleared items.How this be possible when the accounts are cleared i could see it in open item too.Please suggest.

    Hi,
    One more reason for this is that you have posted ur bank reconsilation entry in the future date.
    See by default SAP will always derives current date to your FBL3N selection screen in the open item key date field, so when you pass ur recon entry at a future date, system will show this line items as open items as on current date.
    check the open items by removing date in the key date field in FBL3N selection screen
    Where as cleared item selection there will not be any date derivation by the system, so system considers all the documents irrespective of their posting dates.
    Please ask for further issues.
    Thanks,
    Srinu.

  • Extraction of the open items(TC FPBW) and clear items in FI-CA(TC FPCIBW)

    Dear experts,
    I have a question regarding as the transaction FPBW and FPCIBW .
    What i know is that these transactions tranfer the open item and clear item information from the table DFKKKO to table DFKKOPBW and DFKKCIBW.
    But I would  like to know whether there are some filters when  these transaction SAP transfer the table from DFKKKO.
    As we are adding a new document type (DFKKKO -> BLART) in the FI-CA system, I wonder whether they would be also transferted by the transaction.
    Thanks in advance.

    Hi,
    How you resolved this issue?
    If you are having the solution for this please share with me as well.
    and one more thing, how can we schedule these two jobs in background for daily loading the data into DFKKCIBW and DFKKOPBW.
    Please share these two things with me.
    Thanks in advance.
    Srinivas

  • FINT  interest calculation on open items

    Hello,
    I am a noob and I hope this is an easy one... At the moment our system is doing interest calculation only on closed items through FINT transaction, but now we need to enable it to do an interest calculation on open items, too. I would kindly require to point me how to do this.
    Help is greatly appreciated.
    Kind regards,
    Andrej Trilavov

    Dear Andrej,
    You have to change Your interest indicator setting:
    IMG (SPRO transaction)
    Prepare Interest on Arrears Calculation
    AND
    Prepare Item Interest Calculation
    change the item selection frame settings.
    I hope this helps.
    mauri

  • Open and Cleared Items

    Hi all
    We are currently busy finalising our FI-CA BW Data Modeling exercise - and in process to complete Dataflow documentation.
    We will make use of the standard open and cleared item extractors with enhancements on different levels. Some background on the requirements:
    - We will have to extract document types, divisions, dates, clearing reasons, contract account, Business Partner etc.. information to meet the requirements.
    - We will have to keep history for at least 26 months to produce the required management reports (very high number of data), and 'partition' the cubes on date level for both Cleared and Open Items.
    - Most of the reports display 13 months worth of billing/ payment figures. I.e. the report for the end of October show billings vs. payments for October 2006, September, August, July, ... to October 2005.
    - The requirement is that the report figures will not change from one month to the next (i.e. if I run the report for end of October - all figures from October 2006 to Oct 2005 will remain the same when I run the report for end of November). I.e. if reversals, transfers, returns etc. occur - these will be picked up in later months.
    - For the above requirement, we are looking at extracting open (end of month) and cleared items (for the specific monthly interval) on a monthly basis, and appending the data in the cubes. We will then always base the June figure in the report on the June month extraction (LAUFD/ LAUFI fields) and we will pick up any movement in the next month/s - i.e. July.
    Has anyone had these types of requirements before - to report on billings vs. payments, and report on history as described above. We would appreciate it if you could share your report requirements, and also design documents, especially the DataFlow documentation that we can look at as input to our design.

    We had a requirement to retrieve "aging of receiveables" by customer. Basically, it goes thru each record and depending on the due date places the amounts in the following buckets (example). 0-30 day Overdue, 31-60 days Overdue, 61-90 days overdue, 30+ days overdue, 60+ days overdue) etc all the way to 6+ years overdue.
    There are also cooresponding buckets for coming due analysis. For example, what is: 0-30 days coming due, 31-60 days coming due, 30+ days coming due, etc...
    To do this, first I needed to be able be able to produce an open items statement at any given time in the past. Now, this seems impossible because of how the items go from open to cleared all the time. And an item that was open one month ago, may not be open anymore.
    What I did was first remove any selections on item status. Then compare the posting date with teh key date in the past, if the posting date is less than or equal to the key date, keep the record.
    Then compare the clearing date with the key date. First, keep all that are #. (This keeps all records still open from that posting date/key date)
    Then, add another check for all items that were cleared after the key date (GT Key Date). This gives you the open items on that date.
    Hope that makes sense. Let me know if you want clarification.
    /smw

  • How to clear the open items and parked items for customer

    Hi Experts,
    I need to clear the open items and parked items for customer.
    So any one could let me know the transaction code and procedure for clearing the items for customer.
    Best regards,
    Kesava balaji.

    Hello,
    Parked items will have NO RELEVANCE, unless you post it.
    You CANNOT clear parked items.
    You can clear the posted items using F.13 or F-32
    Regards,
    Ravi

  • Open and cleared items FBL3n

    Hi Guys,
    I have a query.
    In FBL3n for G/L line item display , we select open items or cleared items on a particular date.
    What is the meaning of this? open in what sense? cleared in what sense?
    thanks..
    srikanth

    Hi,
    You can set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
    Example:
    A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
    Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
    You can say that open items means vendor or customers needs to be paid.
    Regards,
    Jigar

  • How to convert a open item become cleared item without using F-32

    Dear experts,
    Can I convert an open item become clear item without using F-32.
    Please help.

    Hi,
    You can use F-28.
    If it's useful assign points
    Thanks&Regards,
    Kumar

  • Interest calculation on due date and not on invoice

    Hello,
    Pls can some one let me how to start interest calculation on due date and not invoice date.
    In the interest calculation, T code FINT, the system calculates interest from invoice date till clearing date and not from due date till clearing date.
    BR,
    Zulfikar

    Hello,
    We have selected the Always calculate interest from net due date check box. but now when i run FINT transaction for a customer it is calculation interest from invoice date and not on due date. the item is already cleared.
    The scenarion is
    the net due date of the docuemnt is 30.07.2008 so the interest calculation should stard from 31.07.2008 till clearing date. but the interest calcualtion is starting from 01..07.2008 which is the invocie date.
    BR,
    Zulfikar

  • Difference between booked items and requested items

    Hi Gurus,
    I wanted to understand the difference between
    Booking History - booked items – booked date
    Booking History – requested items –booked date
    The Series definition has the same definition given in the hint. I checked one of the below links for the same topic but couldn't get a full view.
    Which series go to Actual_quantity in Standrad collections
    Can any one let me know what the difference between booked items and requested items is? As I understand in OM, we have no differentiation. Do let me know
    Thanks
    DNP

    Hi
    In normal circumstances, there is no difference between requested item vs. booked item. But if you're using Item Substitution, these could be different. For example, a customer may call to request item A but for multiple reasons it may be substituted by a different item (usually an upgrade with similar form, function etc).
    Oracle APS supports this functionality out of box in order promising and ASCP where it can be done based on a pre-defined relationship based on availability etc.
    Hope this answers your question, please feel free to let me know if I may help calrify further
    Navneet Goel
    Inspirage
    [email protected]

  • Unable to display the Kit Items and component Items in XML Publisher

    we have created an Order with Kit Items,when we Pick Release the Order it is not printing Kit Items as it is Oracle standard functionality. We customized the Pick Slip RDF to display Kit Items.
    when we run the XML Publisher version of Pick Slip report, it is displaying component Items on one page and Kit Items on another page without header information.
    How can we display Kit Items and Component Items on single page instead of 2 pages?
    Please give us suggestions to implement this in XML Publisher.
    Thanks&Regards,
    Suresh.

    Suresh
    I dont know anything about the Pick Slip template so am unable to help without more information.
    If there are enough kit items to fill more than one page then w/o reducing the font size you'll have to put up with the items spilling to a second page
    Tim

  • How to show statistics of main item and related items with less filter?

    Hi experts,
    Have any of you come thro' similar requirements before?
    To show the statistics of a main item in different aspect in a document and show the comparison of this item in a particular aspect with other related items as inputted at prompt.
    You can image that, for the comparison, if I build another query for the related items, there will be duplicated dimensions, which we aim to avoid as duplicated dimension confuse end users.
    However, if i build the main items and related items in same query, for those reports of main item only, I need to add a report filter one by one!
    Any one of you have better idea?
    Thanks and Regards,
    Cherry

    You Should use Formatted Search in this case.
    You must create and associate a query for your field.
    click on the field you want items to be listed and press Shift + F2
    catch the keydown event of this field  and check pval.charpressed = 9 (tab key press)
    then execute
    SBO_Application.SendKeys("+")

  • JQuery Tutorial needed to customize Add New Item and Edit Item forms

    Hello,
    I need a tutorial to use JQuery to customize the UI Screen of SharePoint to add a new item in a list.
    since I don't have prior UI experience it will be nice if the tutorial is specifically targetted towards customizing the automatic form which is presented by sharepoint when we try to add an item to a custom lists.
    val it: unit=()

    Hi,
    According to your post, my understanding is that you want to customize the New Item and Edit Item forms using jQuery.
    The following examples for your reference:
    http://ankursharepoint.blogspot.com/2012/10/jquery-for-tabbed-navigation-in.html
    http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
    https://www.nothingbutsharepoint.com/sites/eusp/Pages/10-jQuery-Snippets-for-SharePoint-2010.aspx
    jQuery Tutorial
    http://www.w3schools.com/jQuery/
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

Maybe you are looking for