Interface between Lotus Notes Data Base &  SAP

Hi All,
Our client is having both Lotus Notes Database & SAP. Theirs some data is stored in the Lotus Notes Database. Now they want to transfer that data into SAP.
What we have suggested is to download the data from the Lotus Notes into excel sheets & from the excel sheets we can upload into SAP.
Plz tell is there any interfacing tool available between Lotus Notes Database & SAP or what we have suggested is right?
Reg,
Nishant

Hello Nishant,
you may consider the SAP R/3 - Lotus Notes/Domino Integration options listed in
Re: SAP Workflow and Lotus Notes Integration
If this does not fit your requirements or if you need more information, please let me know.
Regards
Michael

Similar Messages

  • Lotus notes data in SAP BW

    Hi Gurus,
    We are facing with a typical scenario here. I want to have my Lotus Notes data in SAP BW system. Lotus notes uses NSF file system to store data. I am not clear how can we get this into SAP BW. I tried searching the same in different forums but none of the thread come close to solving the issue.
    There are connectors available. However, I am not able to find documentations on the same. I know how to transfer SAP BW data in Lotus notes but not the reverse. I tried searching for LotusSQL Drivers but found no documents on this as well.
    I want to know what source system can we use here. Is'nt there any other way without using a file system as Source system to accomplish this. I want the entire process to be automated. I don't want to use a middleware (like ORACLE database) in between Lotus notes server and SAP BW.
    Can anyone please respond to the same.
    Thanks in advance.
    Regards,
    Sreekul Nair

    Thank you for the prompt response Shanthi. However, I don't want to use File System as my source system. I want to do it via a use of a Lotus notes connector or Lotus Enterprise integrator. I want that the data as and when pushed from Lotus notes  should appear in BW system.
    How to achieve this. Plz help.
    rgds,
    Sree

  • Accessing Lotus Notes data from SAP

    We need to fetch some user data such as their email address from a Lotus Notes database using the user's phone extension as a key. This could be from a BOR method used in a workflow or from an FM.
    Is this possible, feasible, advisable? If so, what does it take?
    Any help or ideas from experts on this forum will be greatly appreciated.
    Thanks ... Jameel

    Hi Murthy,
    Given link below has a ADOBE DOCUMENT that has the detailed information on how to use i-views for accessing outlook calendar from within SAP :
    http://help.sap.com/bp_epv260/EP_JA/documentation/How-to_Guides/KM/Create%20iViews%20to%20Access%20MS%20Exchange%20Data.pdf
    <b>Kindly reward points if you found the reply helpful.<b>
    Cheers,
    Chaitanya.

  • "Read" status of e-mail will not sync wirelessly between Lotus Notes and 8520??

    HI,
    This is my first post and I realize that this might not be the right area to post this question but my question did not seem to fit anywhere else.
    I was recently issued a BB 8520 at my new company and we work in a Lotus Notes environment and I believe it is version 7.
    This is not happening to anyone else that I know of in our company but when I read an e-mail in Lotus Notes from my desktop, wireless sync will not mark it read on my Blackberry. Also when I read an e-mail on my BB, it will not mark it read in Lotus Notes. However if I delete an e-mail in Lotus Notes, it will delete it from my BB via wireless sync. Finally, when my BB is attached to my desktop via USB, and I do a manual sync from Blackberry Desktop Manager, it will sync the "read" status of my e-mails between Lotus Notes and my BB.
    So I guess my question is why are most sync functions working via wireless sync between my e-mail in Lotus Notes and my BB, but not the "read" status of an e-mail? And I know that it works for other users in our company so it's really bothering as it is a whipping to have check e-mails that are still marked as unread (in both Lotus Notes and my BB) when I have already read them.
    Thank you and I would really appreciate any help or information that I could provide to our IT Admin at work to help him solve my problem.
    Thank you,
    Matt

    Hi and welcome to the forums!
    Looks like you posted in the right device forum and your post is very clear!
    First open the main message queue, menu key options, email reconciliation, is wireless reconcile on?
    Some "light reading" that may address the issue as well is attached below.
    Let us know how it goes!
    Thanks,
    Bifocals
    Unread marks synchronization is inconsistent between BlackBerry smartphone and IBM Lotus Notes
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Lotus Notes data migration

    Hi,
    is there a possibility in OWB to migrate Lotus Notes data in Oracle?
    Thanks

    You can also use Lotus's LEI (Lotus Enterprise Integrator)to do this. If you having recurring datasets to move across (say, refreshes from lotus databases 1x/week)you can automate that pretty easily. Also, if you want users to be able to do some of this themselves (educated users ideally) it can help there. As a bonus, you can place the responsibility of upkeep onto the Lotus Admin. or Notes developer, as it is add-on to a Notes Domino Server. the onlypart you would need to play would be to add appropriate Oracle client software onto that server and give hostname, etc. to them for the setup. I think LEI (Notes to Oracle) belongs at least in some part.

  • IBM Lotus Notes access for SAP solutions

    Hi SDN friends,
    Can somebody through some light on IBM Lotus Notes access for SAP solutions.
    How this works technically?

    Hi vinay
    u cn refer to these links.u cn get some idea abt IBM Lotus Notes
    IBM Lotus Notes integration with SAP CRM
    Integrating lotus notes with R\3
    ESS to IBM Lotus Notes...
    Regards
    Bhargava
    sorry for replying late,i havent seen this question.......
    pls assign points if the links are useful by clicking on the radio buttons to the left of my post

  • Adobe Form with XML interface cannot retrieve all data from SAP

    hi all
    I want to use the Adobe forms for the real estate module.
    I had seen that adobe forms can have an interface with XML input and output as parameter.
    In the interface type only the /DOCPARAMS an the DOCXML are INPUT parameters which are available.
    No other INPUT parameter can be added to it.
    When i try to retrieve the data in real estate there are some default function modules for retrieving the data from real estate.
    But this function modules also are going to find out if the form which asks for this information has a IMPORT parameter
    for the required data. For example, the SENDER data is retrieved, but before the default function module retrieve this data
    the function module checks if the form has a INPUT parameter SENDER.
    And that is not the case. And i cannot create the SENDER parameter to it, because this INTERFACE type does not allow it.
    Does anybody know a solution herefore?
    kind regards,
    Anton Pierhagen

    Hi Bhaskar
    It is a long time ago, almost 2 years.
    I created my own custom development for calling the Adobe form. This custom development uses the correct function module interface with the IMPORT XML.
    The XML which i sent as IMPORT PARAMETER to the form is also created by own custom development. Via the default XML class of SAP
    So that was my solution
    Kind regards,
    Anton Pierhagen

  • Link in lotus notes to view SAP document

    Dear All,
    I have implemented the Z workflows through which I am sending the notification to all the cost centers mentioned in the invoice through rule(Agent determination:Function to be executed). This will cause notification to be sent to SAP inbox as well as lotus notes. Now my requirement is to have a link in the lotus notes to view the FI document & the invoice attached which has cause the mail to be sent to user.
    How can this be achieved?
    Kindly advice.
    Thanks & Regards,
    Sangeeta

    Hello,
    To solve this issue you have to make changes in the program RSWUWFMLEC. Please follow the below steps to solve this issue.
    1. Create a custom program by ZRSWUWFMLEC by copying the program RSWUWFMLEC.
    2. Find out the Language of the Appover set in the System.
    3. In the Mail sending function module you will get the language option. You have to set the language as the curent approver / mail recepiant's langue.
    4. Schedule a JOB using the report ZRSWUWFMLEC  and cancel the job which was running with the report RSWUWFMLEC.
    Regards,
    Anindya

  • I can send multiline interface commands but not data commands

    hi
    i am using a gpib controller.I cannot seem to find a way to switch between multiline commads and data commands.the key is the ATN bit as to send a DAB command the atn bit must be low. I cannot make the controller distinguish when a command is a adta command and not a multiline command,

    sorry bit i did not know i could answer you directly.
    i am using the measurement computing gpib controller cb7210.2 which is nearly ni compatabile.i am interfacing it with a microcontroller connected to the pc.Then i am trying to use a monitor program that is embedded in the microcontroller to perform remote access of instruments.i am using assembly. i have managed to communicate with the instrument.now the problem is that i cannot make the distinction between data commands and interface commands.for eg if i send 3Fh and atn happens to be 1 this is interpreted as UNL if atn is 0 then it is interpreted as data command.i need to be able to have control of the atn bit so that i can send either at will. so to problem is how to control the atn bit.
    thanks
    again

  • "All Day" Calendar issue between Lotus Notes, iPad & iPhone

    I use only the Exchange sync feature to sync my corporate account with both my iPad and iPhone and both on iOS 4 latest releases. All my calendar entries (irrespective of which device I enter it on) sync flawlessly between all 3 devices. Except when I enter a multiple "All Day" event!
    The computer and iPad display the correct start and end dates for the "All Day" events (so it is not a syncing issue), but the iPhone insists on shifting everything 1 day forward!
    Any ideas why the iPhone does this although all other calendar entries are correct? I suspect this is something very specific in the iPhone calendar coding.

    Did you ever manage to work out what was happening with this?

  • Using RDI Interface to send print data to SAP PI

    Hi,
    I have never used the SAPScript Raw Data Interface, but I now have the task to send printing information to SAP PI and
    from there to a print service.
    I see, that I could send the printing documents as IDoc, but is it also possible to call for example a function/program, where I could process the print data and then send it to PI?
    Each different print document needs to have it's own sapscript form to derive the necessary fields of content, right?
    Has anyone an idea, what I could do? Can anyone give me an overview about the possibilities of the RDI interface?
    Thank you very much!
    Michael

    Please check the element "Dealer_code" in your SAP system . Is it a data element or a field? i dont think that is defined in your system.

  • Interface between TestStand and Clearcase base project

    I would like to interface TestStand 3.5 with clearcase but in my company we only use clearcase base project whereas TestStand requires UCM base project.
    What can I do to fix this issue ?

    Hi,
    I'm afraid but there is no workaround to achieve what you want to do.
    You can use Teststand and get Source Code Control menu and features from Clearcase.
    Have a look on the folklowing link:
    http://digital.ni.com/public.nsf/allkb/E5763AD50D2​9E44286256CEC0055552F?OpenDocument
    Omar. NI

  • Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

    Dear SAP Expert:
    I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
    I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
    Please suggest me how to fix that kind of issue.
    "com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
    at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
    at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
    at SAPAdapter.execute(Unknown Source)
    at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
    at JavaAgent.NotesMain(Unknown Source)
    at lotus.domino.AgentBase.runNotes(Unknown Source)
    at lotus.domino.NotesThread.run(NotesThread.java:249)
    Thanks in advance! Your help would be highly appreciated! Thanks again!

    error is clear, check your abap code.

  • Encrypting Lotus Notes - SAP interface

    Dear all,
    Is there any standard best practice if you want to encrypt data transfer from Lotus Notes to SAP RFC?
    Is SNC compatible with Lotus Notes?
    Or should I create or implement custom algorithm in my ABAP code for corresponding RFC and also in Lotus Notes program?
    Thanks for the advice
    Regards,
    Erick L. Panjaitan

    Hi, Pavan,
    Thanks, but that one was not really what I'm looking for.
    I've already established an interface connection from Lotus Notes to SAP. What I am looking for is, how can I encrypt the data transmission between Lotus Notes and SAP. I am looking for some way to encrypt the transferred data between those two system.
    Should I create some encryption function on both system or is there any "standard", "ready to use" one.
    Regards,
    Erick

  • Intergate Lotus Notes with SAP

    Dear All,
    I had do mail configuration in SAP and its working.
    But i want to import all my Lotus Notes contact in SAP. is it possible? How?
    OR can I Intergate Lotus  mailing system with SAP?
    Regards,
    Nisit

    Nisith,
    The approaches that are currently available to integrate SAP R/3 and Lotus Notes are:
    Lotus Connectors:
    Lotus Connectors are system files that are developed using common object model interface, known as Lotus Connector API. They provide optimized access to the enterprise data from Domino. These connectors are installed on the Web Application Server platform of SAP and are used to connect to and to transfer data from the enterprise servers and other enterprise platforms. This Lotus Connector, when used with enterprise integration tools, facilitates to integrate SAP application logic with Domino applications. The Connector was developed using SAP's Remote Function Call Software Development Kit (RFCSDK) and enables execution of any SAP Remote Function Call (RFC) that is remotely callable, all BAPIs and Transactions using Batch Data Input. Using the Lotus Connector for SAP technology ensures that data transfers and queries are processed through the SAP application layer, preserving the business logic and data validations contained in SAP Remote Function Call and transaction interfaces, which comprised of SAP processes. Therefore, reading and writing SAP data is always performed through the application layer and not by directly accessing back-end database tables and by using Lotus Connectors all the business rules provided by RFCu2019s and SAP Transactions are maintained.
    Domino Mail Transfer Agent for R/3:
    A server-based add-ins, Domino MTA is used in bi-directional message transfer amid SAP R/3 and Notes, which leads to the transformation of Dominou2019s inbox into a universal inbox for both Domino and SAP. This tool is used to send messages to and from SAP R/3 to notes. It enables the users to send or receive mails, faxes and also disseminate the data from R/3 system to the notes mailbox. Hence, the users are required to check a common interface for reading the messages from both SAP R/3 and Lotus Notes. The Mail transfer Agent along with providing full attachment support provides users with the rich text support, facilitating R/3 mail users using any other application like Microsoft word as their e-mail editors. In addition, R/3 MTA provides all the transactional support that is required by the users. The users to make sure that the data being transferred from R/3 is properly routed to Domino can also use this support. MTA even enables the users to keep a track of all the messages that are sent or received from R/3 by tracking them in a Notes log file. As mentioned above, the Domino MTA uses add-ins. These add-ins are object client to send mail from Domino to R/3 and object server to receive mail from R/3.
    Lotus Enterprise Integrators (LEI):
    This tool is used to transfer the data both ways between SAP R/3 and Domino applications. LEI are the quickest way to ensure transfer of data and that too without following the tedious task of writing long lines of codes. Also, it facilitates this transfer by taking one end as a source and the other as a target. In this, the data transfer of each type utilizes a different connector such as Oracle connector and Notes connector. These connectors are used in both LEI and Domino Enterprise Connectivity Services (DECS) to ensure bi-directional access of notes and web applications of R/3 data from a Domino server.
    Hope this helps you.
    Rgds
    manish

Maybe you are looking for