Interface between XI and BIZTalk

Hi Guys,
Can any help me here In Middleware
1. i need some INputs between XI and BIztalk
like what are XI Futures and BIZTAlk
2. WHat sort of Adapter need in XI to make a Connectivity between XI and BIZTALK.
Advance thanks..
Thanks
Raj

Hi,
Please check this two documents:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/a73e8127-0a01-0010-b19f-f72ee1c2403c
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/107c7a27-0a01-0010-be82-92347921ae03
Regards,
Wojciech

Similar Messages

Interface between WM and SD

Hi,
Is there anybody who can give me the details of the interface between WM and SD through shipping module?
It would be nice to have few info about WM /PP and WM/QM.
Thank you in advance.

Hi,
The interface is mainly through the LEWM movement type configuration. You need to define the Interim storage type and movement types required to sales process prior to that.
After you are done with the above settings, then you can configure for the 2 step picking. If you need it.
Thanks,
Mono

IDOC Interface between CO and BW

Hi Gurus
I am just looking for documents about all interfaces between CO and BW/BI. Can any body supply me these??
Thanks in advance
SIM

Hi Joe-
There are several How To guides that provide detailed instructions on how to automate transactional and master data loads from NW BW into BPC. Please check out the following guides:
[How to Migrate Transactional Data|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0427318-5ffb-2b10-9cac-96ec44c73c11]
and
[How to Automate Master Data Loads|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827]
Regards,
Sheldon

Interface between paravision and labview

Hi,
Does any one here who can help or give some idea how to make an interface between paravision and labview software???I need to acquire captured MRI image from paravision and store it to Labview.
I would appreciate for any kind of assistance.
Kind Regards,
Jasim

Hi Jasim,
Could I get a little more information about how you are importing the MRI image into LabVIEW?
1) How are you getting the MRI image into LabVIEW?
2) What image format will the image be in?
3) What will you be doing to the image once it is in LabVIEW?
Best Regards,
Bill
Bill E. | Applications Engineer | National Instruments

Interface between sockmod and udp

Hi,
where can find info on interface between sockmod and udp stream modules. Iam specifically looking for how sockmod and udp/tcp modules inform each other of the destination ip/port numbers, source port number etc... any help would be greatly appreciated.
Thanks,
Surya

Hi,
In our case we are using
IDOC-XI--SOAP ( For all Outbound scenarios)
In this case ask abt wsdl files for SOAP Structure
HTTPXI--IDOC ( For all Inbound scenarios)
In this case POS will directly post the message to intergration server direcly by using parameters like namespace , IS details
Regards
Seshagiri

Interface between Legacy and SAP for Equipment Master

Hello
I got a requirement where I need to develop a interface between legacy system and R/3 system for Equipment Master Data update in R/3. I am thinking of getting a Idoc file from Legacy and then update the changes or any new creation of Equipments in R/3. I found a standard BAPI for this BAPI_EQUIPMENT_CREATE/CHANGE. This BAPI use a strcture BAPI_ITOB for data record of IDoc. But I got more data from legacy except what we have in BAPI_ITOB. I got Partner Data, Classification data also for Equipments. I am thinking of copying the BAPI to a Z function module and modify the Idoc structure , message type and all to capture all the data and then do a update in same way as standard transaction IE01(Equipment Create) is doing in Batch Input. Do you think if there is any better way of doing this? I am not used to transaction BAPI . just wondering if we Can use that in someway to include our modification?
Thanks
Harkamal

20,000 is on quite higher side for IDOC.
IBIP help doc says it needs 2 Kbyte for each record, i.e. 40 Mb for 20,000 rec. that should be ok. Since it has structures for Partner & classification data , I don't think u need to modify the BAPI.
Transaction IE01 - Create equipment
Transaction IE02 - Change equipment
Structure - IBIPEQUI Equipment record
                 |->    IBIPNSTA     New status profile if necessary
                 |->>   IBIPSTAT     User status records
                 |->>   IBIPDOCU     Doc. from Doc. management system
                 |->>   IBIPPART     Partner details (comment below)
                 |-->> IBIPTEXT     (see comment below)
                          for long text:          TEXT_MARK = " " empty
                          for internal comment:   TEXT_MARK = "1"
                 |-->> IBIPCLAS    Classification record (eqpmt class)
                     |-->> IBIPFEAT     Classification characteristics,
                                           ie. features for the class
                 |-->> IBIPBDCD     see below (from screen 102)

Block Demand Depend Interfaces between ECC and SCM

Hello All.
Is there a way to block only interfaces of Dependent Demand between ECC and SCM.
I need to do this because ECC writes over my plan in SCM.
Thanks and Best Regards

Hello PrasunM
For example:
When you create an Order on finished material, SCM using PP method "3 - Cover Ind. Requ." creates DepReq on raw material.
SCM using CIF sends PlOrd, PrdOrd and DepReq to ECC. I want send only PlOrd and PrdOrd, DepReq i only need in SCM side.
Best Regards.

Docs about Interfaces between CO and BW/BI

Hi all Gurus,
I am just looking for documents about Interfaces between FI/CO and BW/BI. Can any body provide me the required documents. It is very urgent.... [email protected]
Thanks in advance
SIM
Edited by: SIM on Feb 22, 2008 12:19 PM

Hi
You are right. I meant the interfaces between FI/CO and BW/BI. Namely how do we build the Interfaces such as IDOC and other interfaces between them. I need practice oriented docs with all steps towards building interfaces.
Thanks
SIM

Interface between ABAP and Excel-report

Hi anyone!
I need to implement a BAdI (CRM_MKTTG_SEG_MEM_EX) for displaying an aggregated BW field in the CRM Segment Builder. However my programmer knows little about the interface between ABAP an Excel. He therefore struggles with the programming. Have anyone of you any suggestions for how he can call a field in a query. Has anyone used this BAdI for the same purpose?
Thanks, Camilla

Hello Camilla,
i think you should ask your question in a generic form in the BW forum. Ask them for access to a Query via RFC.
Regards
Gregor

Reliable messaging between XI and BizTalk using SOAP

I came across this document describing how reliable messaging between XI and BTS can be implemented using the SOAP extensions. This document has been authored by
- André Fischer, Project Manager CTSC, SAP AG
- Matthias Allgaier, Consultant XI, SAP Deutschland AG & Co.
- KG Jürgen Daiberl, SAP Program Manager CTSC, Microsoft Corporation
Does anyone know if the prototype code is available for download from SDN or elsewhere? A search on SDN did not produce any results...
Thanks.
- KishenM

Larry,
Let me see if I understood this - You need to use the SOAP adapter to integrate with BizLink. Bizlink Provides its own SOAP Header and hence you are not sure how to do this.
Got a few questions,
1. Has Bizlink given you a XSD / WSDL. Does this have the entire SOAP Payload including the SOAP Header and SOAP body? If yes, create the mapping as needed and instead of the SOAP adapter use the HTTP adapter or use the SOAP adapter and in the SOAP adapter select option Do Not Use SOAP Envelope.
2. If you do not have a XSD that contains the entire SOAP Enevelope - SOAP header and body then use XSL or Java Mapping that creates this output structure and use the SOAP adapter with the DoNotuseSOAP Envelope option or the HTTP adapter.
The SOAP adapter in the DONotUseSOAP Emvelope mode basically becomes a http adapter.
Regards
Bhavesh

Interface between Labmax and Labview

Hi all,
I am trying to control a laser energy meter, Labmax-top, with labview using labview drivers provided by the meter’s manufacturer (coherent). Once running the labview driver an error message appears saying that the sensor index cannot be found. According to the manual, the sensor index is a number between 1 and 127 and is automatically set by the system.
Does anyone know how to set this manually? or any experience with these kind of problem?
Thanks

I am not familiar with this system at all, but in the worst case your LabVIEW program could just iterate over all possible sensor numbers until it no longer generates an error....
LabVIEW Champion . Do more with less code and in less time .

Interface between SAP and OSI - PI

Team,
Appreciate your response for a query from a customer. Find below
Kindly help us to get some more details from SAP about the connectivity between OSI-PI system and SAP (PP,EHSM and QM).
Because, we might use only for one way communication (pull) the data from OSI-PI to get plant information to update our SAP –ECC for informative
purpose of production reports and EHS.
Queries:
Plan A
1.      Whether OSI-PI RLink is enough for the connectivity to SAP?
2.      Whether any other interface other than SAP-PI or MII to connect OSI PI?
Plan B
    1.      From this year, we are using Honeywell DCS (SCADA) system, whether Honeywell PHD system could connect SAP?
2.      If the above answer yes , then what is the standard interface using for SAP and Honeywell PHD ?
   The above queries raised because of clarity required for OSI –PI interface minimal connectivity requirement.
Thanks and regards,
Irfan

Hi Ifran,
Recommend that you use PCo amd MII to integrate to ECC. MII has JCO and BAPI connectors for ECC as well as the capablilty to implement Listeners to receive IDOC from ECC. MII has additonal capabilities such as the Plant Information Catalog that will be very beneficial in defining historian data and providing business context around it.
PCo has a native OSP PI connector as well as MII connectors that can execute MII transactions directly; the transactions can then execute JCO and BAPI to ECC.
PCo can connect to Honeywell PHD using the PCo OPC HDA connector. (The Honeywell historian OPC server will need to be installed and activated, preferably on the PCo server.) PCo also has connectors for TCP Socket, OPC DA, OPC UA, OPC AE, ODBC, OLEDB, FileMonitor, and additional native historian connectors (Aspentech IP21, GE Proficy, CiTectSCADA).
Regards, Steve

Interface between UC and fire system

Hello,
We are trying to find a way to dial an extension number on our Cisco VoIP phones, that would enable the interface on our firelight alarm system.
In the old days it was just a plc interface that you could change some logic.
The company of the alarm system states that they only need an acknowledgment signal to activate a relay.
Is there a module that can go between a phone or UC system and the firesystem that anyone knows about.
There also maybe another way to do this and if anyone knows a good way, please let me know.
Thank you very much,
Jim

Ask the alarm company what is the interface device the use with other customer PBXs.
Buy and connect it to an FXS port.
If they can't indicate one, get something like a door opener.

Interface between C++ and labview

I have decided a project that consists of C++ and Labview. C++ is used
as the input to labview. However, i don't know how to use C++ to
control the labview. Can C++ control the labview directly? and how ?
or I have to buy another program or hardware to be interface?
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

ActiveX and TCP/IP are both good choices for high-level communication
between Windows applications. LabVIEW's VI Server, introduced in version
5.0, gives you tremendous power to control LabVIEW programmatically and
exposes it to the programmer via either ActiveX or TCP/IP.
For a very nice example that shows how to call a LabVIEW VI with arguments
passed from the C++ environment, then bring the resulting data from
LabVIEW back to C++, check out the following example from NI's site:
http://digital.natinst.com/explprog.nsf/websearch/6960cee3bf3d8c30862565da0078ef30?OpenDocument
If the URL doesn't work for you, just go to NI's Example Programs Database
(http://www.natinst.com/support/epd/) and search for "labview and c++".
Regards,
John Lum
National Instruments
Matthew
Ho wrote:
> I have decided a project that consists of C++ and Labview. C++ is used
> as the input to labview. However, i don't know how to use C++ to
> control the labview. Can C++ control the labview directly? and how ?
> or I have to buy another program or hardware to be interface?
>
> Sent via Deja.com http://www.deja.com/
> Share what you know. Learn what you don't.

Interface between SAP and Document management system

Hi,
I have a requirement to interface SAP 4.7 with a Document management system(Fakta).A vendor invoice will be created in SAP using FB60 transaction.The vendor invoice(in paper form) will be scanned by the Fakta digital document system.The Fakta system will handle the approval process for the vendor invoice and update the status of invoice in SAP as APPROVED.
My requirement is when an SAP user wants to see the scanned invoice stored in the fakta system,he should be able to view it from SAP preferably from FB60 or the document overview for the invoice in SAP.What is the best way to do this.
I found one option of using RSDEMO_HTML_VIEWER which may not be useful as we think.Is there a better option available?
Please share your experience.
Thanks in millions,
Leo

Hi
I'm sorry but I've never worked on this problem, but I think the better solution should be use SAP Archivelink, I know It should do what you want.
See here:
http://help.sap.com/saphelp_46c/helpdata/en/93/51b7569e0811d1a55e0000e82deaaa/frameset.htm
Max
Message was edited by: max bianchi

Interface between XI and BIZTalk

Similar Messages

Maybe you are looking for