Interface Mapping not found in interface determination

Hello experts,
I am facing a very basic problem in my scenario which is stoping me from moving forward.
In interface determination when i select the inbound interface and then try to select the interface mapping, nothing is shown in the value help.
this is happening for all my scenarios even though the IR configurations are correct and I have also refreshed the cache.
What can be the problem? some installation problem, SLd prob or IR??? Please help as i am stuck!!
Thanks a lot in advance.
Yash

Hi Yash,
This is really very strange despite of most probable solutions.
Can you do one thing delete all configuration objects in Directory and activate. Now in repostiory remove mapping programs(message mapping and interface maaping) and activate.
Check the message types and data types and message interfaces.
Specially in message interfaces check whether correct message types are assigned. If so proceed with new mapping programs and activate the objects.
Also do a fresh configuration in ID, activate and execute your scenario.
One question, can you give a arrow diagram of scenario(e.g. file>xi>JMS)
Thanks,
Gujjeti

Similar Messages

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
 <EmpId>315143</EmpId>
 <EmpName>Deepak Sodhi</EmpName>
 <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Interface Mapping Not found?

Hi expert,
iam doing file to file senario using file content convertion,i have done IR,ID.while runing the senario its not execuing.To test the senario in ID i done it in Test Configuration in that its giving Interface Mapping not found but i have check all i done it right were the problem is there i cant understand can any one plz help me.
Regards,
Phani

Hi Phani,
It won't be solved by restarting the server.
Please go to the IR and check the interfaces you are using are pointing towards namespaces in which you have made the message mapping.
Most of the times if you are copying the things from different namespaces these errors come.
Thanks
Amitanshu
Reward Points if the answer is useful for you
Message was edited by:
Amitanshu Deep

ORABPEL-11627 Mapping Not Found Exception

Hi,
I am getting into this error . Any idea how I can overcome this.
Invoke_1 (faulted)
[2006/05/16 18:03:20] "{http://schemas.oracle.com/bpel/extension}bindingFault" has been thrown. less
<bindingFault>
<part name="code" >
<code>null</code>
</part>
<part name="summary" >
<summary>file:/D:/OraBPELPM_1/integration/orabpel/domains/default/tmp/.bpel_check3xml_1.0.jar/write_good_file.wsdl [ write_good_file_ptt::merge(Ebill1500HdrStagingCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: Mapping Not Found Exception. The mapping [ebill1500DtlStagingCollection] for descriptor [class bpel___localhost_default_check3xml_1_0__MD5_1599fb090298a18cd7a14175df888307_.check3xml.Ebill1500HdrStaging] could not be found. The input xml record had an element [Ebill1500HdrStaging/ebill1500DtlStagingCollection]. ; nested exception is: ORABPEL-11627 Mapping Not Found Exception. The mapping [ebill1500DtlStagingCollection] for descriptor [class bpel___localhost_default_check3xml_1_0__MD5_1599fb090298a18cd7a14175df888307_.check3xml.Ebill1500HdrStaging] could not be found. The input xml record had an element [Ebill1500HdrStaging/ebill1500DtlStagingCollection]. Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping. </summary>
</part>
<part name="detail" >
<detail>null</detail>
</part>
</bindingFault>
thanks in advance

Hi,
I too get the same type of error. But in my case, i don't have two partner links. I have created only one and it throws the same error.
Error details:
<bindingFault>
<part name="code" >
<code>null</code>
</part>
<part name="summary" >
<summary>file:/usr/oracle/midtier/integration/orabpel/domains/Dev/tmp/.bpel_DBSample_1.0.jar/DBInsert.wsdl [ DBInsert_ptt::merge(TestQueueCollection) ] - WSIF JCA Execute of operation 'merge' failed due to: Mapping Not Found Exception. The mapping [TestQueue] for descriptor [class bpel___localhost_Dev_DBSample_1_0__MD5_354f16a7145fe31c41b6d41f55336740_.DBSample.TestQueue] could not be found. The input xml record had an element [TestQueue/TestQueue]. ; nested exception is: ORABPEL-11627 Mapping Not Found Exception. The mapping [TestQueue] for descriptor [class bpel___localhost_Dev_DBSample_1_0__MD5_354f16a7145fe31c41b6d41f55336740_.DBSample.TestQueue] could not be found. The input xml record had an element [TestQueue/TestQueue]. Make sure that the input xml is valid relative to the xsd and that the mapping exists in the Mappings.xml. If an old version of the descriptor without this mapping has been loaded by the database adapter, you may need to bounce the app server. If the same descriptor is described in two separate Mappings.xml files, make sure both versions include this attribute/mapping. </summary>
</part>
<part name="detail" >
<detail>null</detail>
</part>
</bindingFault>
Can you please help me to solve this problem?
Thanks

Interface mapping not found at runtime.

Hi all,
For the idoc to idoc scenario i was getting an error
Runtime error
Unable to read the payload from the message object
I have cleared the sld cache and also checked in SXI_CACHE to check the mapping at runtime .I m unable to understand where the problem lies.
Can anyone help?
Regards,
Shrita.

Hi,
Please check you message first properly all conditions supporting or not.Is message is having any exceptional chars , and Check whether your are using Async or Synch communication , respectivly the sender and receiver communication mode supporting both sides. and check your J2EE is working fine or not, Check your interface is having the module processors in sender side/receiver side is yes , those are working fine or not , those are properly imported properly or not.
these diffects may not effect the activation of components.
Also check your receiver Business system is working fine or not
And also check your receiver agreement is configured,receiver determination and interface determination all are refered same business systems or not.
,please see the following threads
Error RCVR_DETERMINATION
No Receiver Determination
Re: NO_RECEIVER_CASE_ASYNC
XPATH and RECEIVER DETERMINATION
XI 3.0 No receiver could be determined
Regards
Chilla..

BPM Error in Transformation Step: Interface Mapping not found

Hi,
Can you help me on this? I have a tranformation step in my BPM that combines a request and response message of a previous Send step to create a Source message for the next Send step. However, on my transformation step, I got the mapping error in workflow log: Interface mapping http://gl.euhreka.com/learning/skillsoft/catalogSy.YGLXI_OM_MergeRequestAndHandleResponseAB_To_PollFo (SWCV=DF8549309ECE11DFB58DF3570A341E0F) not found
Do you have any idea about this error? My mapping program is working fine. I also checked if the container elements assigned to the transformation steps are correct.
Can you suggest of other way on how can I achieve on merging 2 messages (request and response) and set it to the Request for another send step?
Thanks,
Jenny

Hello,
I already solved the problem. The namespace and Operation mapping name is too long that's why it cannot be located at runtime.
After the rename, another error appeared.
"Incorrect XML format after mapping: Root-Tag expected instead of Messages"
There are no useful information on the trace:
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping http://test YGLXI_OM_Merge , Software Component Version DF8549309ECE11DFB58DF3570A341E0F</Trace>
<Trace level="1" type="T">Mapping Step 1 , Type XSLT , Program PollForReport_Merge</Trace>
<Trace level="2" type="T">Call XSLT processor with stylsheet PollForReport_Merge.xsl.</Trace>
<Trace level="2" type="T">Returned form XSLT processor.</Trace>
</MappingTrace>
Here is myXSLT program:
<?xml version='1.0' encoding='utf-8' ?>
<xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" >
 <xsl:template match="/">
 <YGLXI_MT_PollForReportRequest>
 <customerID>
 <xsl:value-of select="//customerID"/>
 </customerID>
 <customerPassword>
 <xsl:value-of select="//customerPassword"/>
 </customerPassword>
 <reportIDHandle>
 <xsl:value-of select="//reportHandle"/>
 </reportIDHandle>
 </YGLXI_MT_PollForReportRequest>
 </xsl:template>
Here is my source message:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:YGLXI_MT_InitiateFullCourseListingRequest xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
 <customerID>ZZZ</customerID>
 <customerPassword>XXX</customerPassword>
 <reportFormat>VVV</reportFormat>
 <mode>VCC</mode>
 <userName>CC</userName>
 </ns1:YGLXI_MT_InitiateFullCourseListingRequest>
 </ns0:Message1>
 <ns0:Message2>
 <ns1:YGLXI_MT_InitiateFullCourseListingResponse xmlns:ns1="http://gl.euhreka.com/learning/skillsoft/catalogSynchronization">
 <reportHandle>SADA</reportHandle>
 </ns1:YGLXI_MT_InitiateFullCourseListingResponse>
 </ns0:Message2>
</ns0:Messages>
I tested my program in Operation mapping and it is working. How come it is not in BPM?
Thanks,
Jenny

Interface Mapping not found error

I'm getting "Interface Mapping <name> (SWCV=<id>) not found" error during runtime. I did not do anything to the specified interface mapping. If I go into the repository and put into modify mode, add space to description, save, activate, it all works fine. Any idea why my interface mappings are getting "lost" in the runtime cache... any way to do a bulk reload of repository objects into the runtime cache?

Hi Tadd,
It may help to eliminate the possible erros:
1) In the Runtime Workbench, simulate the message in the Component Monitoring / Adapter Engine. If this does not work:
2) Try to restart the JVM. I have seen sometimes that the mapping functions stored as Java files do not get refreshed.
Cheers,
Bhanu

Interface not found in Recevier Determination

Hi,
I am trying find out why I cannot see the interface i created in the IR in ID. The sceanio is IDOC via HTTP to XI to R/3.
2 Comm channels are setup, 1) HTTP sender for business service and 2) an IDoc recvier for the R3 system.
The repository project only conatins a Message Interface (abstract, asyc) created from an imported IDoc structure.
When I go to create a new receiver or interface determination, I cannot see the interface....am i missing something?

Hi Butts,
We use abstarct async Interface when we are using BPM else for sender we have to use Outbound Async. INterface.
And add this Outbound Async. interface to Business Service.
And for sender IDOC no need to create Sneder Comm. Channel even Sender aggrement is not required.
Sachin
Message was edited by:
Sachin Dhingra

Multi-mapping not found at configuration time

Hi
I have defined an interface mapping that takes one msg interface as source and two msg interfaces as targets - the underlying message mapping is a multi-mapping.
However , when I go to configuration time - and create a enhanced interface determination - and drop down - to pick up multi-mapping - it says no objects found !!!
I double check the sender interface and its link with the SWCV , the interface mapping - everything is ok . Coud anybody help me - as to why my multi-mapping is not being picked up at configuration time ( I also check the runtime cache - everything is ok )
Please help !!!!

HI,
see the below links
multi mapping - /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
multi mapping without bpm -/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Multiple mappings into one Im - Multiple message mappings in one integration scenario
Regards
Chilla

In Idoc bundling ...message mapping not found

Hi XI Friends..
In my File to Idoc scenario..i want to send multiple IDOCs from the XI without a BPM .
I am following blog by Michal.
<a href="///people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change:///people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
I have xsd for source ..so i created one external definition .and message interface for outbound.
following the above blog by michal..
i imported idoc ..and i exported that idoc into xsd and i changed the occurance of idoc to unbounded and again imported as external definition.
i created the message mapping between these two external definitions.and tested ..
As in michal 's blog..
In Interface mapping..i given source and target interface as standard idoc.and clicked on Read interface then i am not finding the message mapping created in previous step..
i refreshed cache also..
please guide me.....
regards
ram

Hi bavesh...
thank you so much for very your quick responses..
i got xsd as source..based on xsd i created external definition for source xsd and i created outbound interface based on source external deifinition MI_OUT_WearUnits.
and i imported Idoc and exported as xsd and changed occurance to unbounded and again imported as external definition.
i did mapping between these two external definitions.
and i selected standard idoc for source and target interface for interface mapping and given message mapping of previous step.
In ID
sender agreement :
 sender service :BS_external
 sender interface :MI_OUT_WearUnits
receiver agreement:
 receiver service :R/3
 receiver interface : standard Idoc
Interface determination:
sender service :BS_external
sender interface :MI_OUT_WearUnits
reciever service :R/3
and clicked create
inbound interface : Standard IDOc
i am not getting Interface mapping which i created in IR.
i tried Enhance interface determination also..
please guide me....
waiting for your help.
regards
ram

"Mapping not found" Error related to cellular (or slow) connection?

I have an app that uses ORM rather extensively. For the most part it works like a charm. I only have an intermittent error that seems to occur exclusively when the app is accessed on an iPad using data (as opposed to WiFi).
I have users accessing this app in the field and occasionally they will get that obnoxious "Mapping for component (fill in the blank) not found". Only, it was clearly found earlier and if the user logs out and back in, or closes the browser and starts over, the error goes away.
The error throws on a <cfajaxproxy> tag at the beginning of a page load.
Any thoughts?

You call the unit method for purpose.The data or whatever you do is needed to show it in a table, or initialize a text field. You have e.g. bound the table to the bean. So if you unit the data for the table you can use the getter for the table.
I don't know why it works if you select only some rows. It's difficult to say without seeing all evidence. Reading unformatted code doesn't make it easier (not your fault that the forum editor can't format properly).
If you use a getter to check if the data is already initialized you can use a variable which is set to null at first. You check this variable and if it's null you unit the data and set the variable to anything but null.
Timo

CUP 5.3 - Approver Not Found for STD Determinator

All,
I am using the standard approver determinator for super user access - Super Access Owner.
I have got an SPM Owner defined in the source system table for owners but CUP is returning an error message saying that the Approver is not found.
The other Custom Approver Determinators seem to work but the standard one referencing SPM owners does not. Am I looking in the right place?
Can any of you suggest how this can be corrected?
Please advise me if you have any recommendations.
Thanks,
Simon
Edited by: Simon Persin on Aug 17, 2009 11:51 AM Updated type on title.

Hi Simon,
Look at OSS note - 1350046. It may help.
Regards,
Alpesh

Message Interface not found during Receiver determination

Hi Folks,
While doing Receiver determination i found this error
Problem Loading Schema Description: Message interface does not exist in any software components installed on this business system
i checked it in SLD also for Product assigned to Particular Business System. Even i tried with creating a new one and assigning the product and software component to it.
When i imported the Business system from SLD, i m not able to see any inbound and outbound interface for particular business system.
But it is working for another scenario where inbound interfaces are used.
plz help me out
Sachin

Sachin,
>DEV and QA is having diff. SLD so i created the SWC and products in SLD again.
You should export the SWCV from your Old SLD and import in into your new SLD.
and then import the same in Integration Respository.
When you try to export SWCV from SLD, you will get a .CIM file which you need to save in your local desktop and then import this in the new environment.
More in this article,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards
Bhavesh

XSLT Interface Mapping Not Found For HTTP Response

NW 04's SR 10, RFC => XSL => HTML
The scenario transforms data from R/3 into XML using XSLT and sends it to a 3rd party vendor wrapped inside a field of an HTML form via the HTTPS adapter. XSL was used for this instead of standard MessageMapping to meet the customer's needed for the XML data to be delivered in an untransformed structure, including their DTD declaration, so they could parse it upon receipt.
The outbound process is successful and the data is posted to the customer's database. Upon receipt, they send back a simple HTML form containing the success/failure in an H1 tag and our submitted XML data in the Body tag.
The problem is that due to the use of an XSL as the outbound mapping XI does not have a cached message structure to which it can map the response and thus throws the Interface mapping .... does not exist in runtime cache message. I do not feel this is a cache problem since I've cleared the XI cache, CPACache and anything else I've read as well as verified that the outbound mapping exists in the XI Cache list. I honestly feel I'm just missing a necessary piece to tell XI how to map the HTML response message back to the RFC Sender.
I have attempted numerous ideas, one of which included the use of the same RFC structure as the inbound and outbound MessageType so that a Response mapping could be specified but a NullPointerException was thrown in the mapping step since the response was of a completely different structure.
My question is how to handle the return data when using XSLT to create the outbound structure dynamically to prevent runtime errors in XI?
Thanks in advance,
Lane

Thanks for the quick response Bhavesh.
I figured out the response mapping option after I posted the question and also thought of using XSL to handle the response but I ran into a few other issues relating to my limited experience with XSLT that is preventing me from completely solving this.
The response is a plain HTML file structured as:
< html >
< body >
 < h1 >Success/FailureMessage< /h1 >
 
 Record Created
 XML Data: <?xml version="1.0" encoding="utf-8"?><!DOCTYPE ....
< /body >
< /html >
where the actual XML data posted to the client system is embedded in the HTML body. Therefore the response is not well-formed XML and fails on parsing but also contains another XML message within the HTML structure that throws off parsing as well. Do you know XSLT well enough to get around this?
What about writing a Java function that just reads the incoming information but in doing this how do I go about mapping back to the RFC? Can I get ahold of the XI API somewhere to instantiate the RFC Objects dynamically?
Thanks again,
Lane

Interface Mapping not found in interface determination

Similar Messages

Maybe you are looking for