Interface Mapping not supported in the JPA specification?

Are there any plans to add Interface support in the JPA specification? It is not supported by JPA annotations, which seems quite disruptive to proper object oriented design. However, individual implementations of JPA seem to support this:
http://docs.jboss.org/hibernate/stable/core/reference/en/html_single/#inheritance-tableperclass
http://wiki.eclipse.org/Using_EclipseLink_JPA_Extensions_%28ELUG%29#How_to_Use_the_.40VariableOneToOne_Annotation
There is visible interest in getting this implemented at an Annotation level for Hibernate also but the developers for Hibernate point out that this isn't even in the JPA specifications.
http://opensource.atlassian.com/projects/hibernate/browse/ANN-9
https://forum.hibernate.org/viewtopic.php?f=9&t=941363&sid=4abdbc72cbf04380f4a8e2cadd7dfada&start=15
Is this being talked about/in the works for JPA? Why not include @VariableOneToOne in the spec? It would seem to be quite an essential feature for wide adoption.

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

Similar Messages

Interface Mapping not listing in the Extended Reciever Determination

Hi,
The Interface Mapping is not shown in my Extended receiver determination. I have created and activated the IM & MM using the MT - Receivers within the SAP Basis.
Regards
Unni

Hi,
You can only choose the Interface mapping for the Enhanced recevier determination in the extended tab of Receiver determination. & I dont see the Interface mapping in the select list.
Where do I have to check for the proper outbound message???
Regards

Are there any specific files (other than swf) that are not supported in the content viewer?

Are there any specific files (other than swf) that are not supported in the content viewer?

Specifically -- Is there a limitation as to any content in a PDF that would keep it from displaying correctly other than swf?

Why New Apple maps not supporting the direction of route in the UAE; which was supported in ios5.Please help

Why New Apple maps not supporting the direction of route in the UAE; which was supported in ios5.
When it is going to resolve

iOS 6 Which Features in What Countries...
http://www.apple.com/ios/feature-availability/

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Getting compilation error: java.util.Set is an interface. This interface is not supported.

Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Hello,
Generic java collections can only be handled in a very generic, weakly
typed manner.
Take a look at the
http://workshop.bea.com/xmlbeans/guide/conXMLBeansSupportBuiltInSchemaTypes.html
and also
http://workshop.bea.com/xmlbeans/guide/conJavaTypesGeneratedFromUserDerived.html
You might also ask your question to the XMLBeans newsgroup:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.xmlbeans
Regards,
Bruce
Sanjay wrote:
>
Hi Folks,
Is there a limitation in BEA's web services implementation? I have a simple web
service that returns an array of java objects. However I am calling another middle
tier API that returns a Set. I convert this Set into array of object and return
it via the web service.
However the .jws file that implements the webservice does not compile. I get the
following error message:
java.util.Set is an interface. This interface is not supported.
Is there a limitation on using Collections within the .jws file? If that is the
case it is a severe limitation.
Note my Web Service API returns an array of java objects with no collections in
them.
Sanjay

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Coldfusion dev installer wont work - "installer user interface mode not supported..."

i just downloaded the os x version of coldfusion 7 mx
developer edition (for the thrid time making sure the download
wasn't corrupt) and extracted the zip and launched the installer by
double-clicking it. the install screen pops up where it lets you
choose what language and i press ok. almost instantly i get an
error message to pop up that says... "Installer user interface mode
not supported. Unable to load and to prepare the installer in GUI
mode."
umm... what?!
does anyone have any idea what's going on and why the
installer is misbehaving?! thanks!
: : michael

and the answer for others stuck on this...
the problems is an installanywhere bug where if the anything
in the directory path contains special characters like "!" or "#" ,
it causes problems with the install. in my case, the directory path
had a "!" in it... hope this helps someone else out!
: : michael

Windows 8, "Installer Interface Mode Not Supported"

I am getting the "Installer UI Mode Error", "Installer User Interface Mode Not Supported"
I have tried compatibility mode, as this worked on my previous laptop Windows 7 and XP sp3, but when I "Test Program" and the InstallAnywhere Self-Extractor completes install prep. to 100%, there is no response.

Is this a very, very old program? What program?
Have you done an Internet search to see if anyone else has gotten it to install?
Have you tried running it As Administrator, in addition to the compatibility modes?
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
   <EmpId>315143</EmpId>
   <EmpName>Deepak Sodhi</EmpName>
   <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Interface Mapping Not found?

Hi expert,
iam doing file to file senario using file content convertion,i have done IR,ID.while runing the senario its not execuing.To test the senario in ID i done it in Test Configuration in that its giving Interface Mapping not found but i have check all i done it right were the problem is there i cant understand can any one plz help me.
Regards,
Phani

Hi Phani,
It won't be solved by restarting the server.
Please go to the IR and check the interfaces you are using are pointing towards namespaces in which you have made the message mapping.
Most of the times if you are copying the things from different namespaces these errors come.
Thanks
Amitanshu
Reward Points if the answer is useful for you
Message was edited by:
Amitanshu Deep

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Error Message: This type of file is not supported, or the required codec is not installed?

I am trying to get media from my computer, and I only receive this error message :
This type of file is not supported, or the required codec is not installed?
What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
I have used this software with success before. HELP would greatly be appreciated!

darlingdarleen
Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
Thanks.
ATR

Error Message: "The formula syntax is not supported by the report"

We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
But when I tried to Add FormulaField, it succeeds
Please help me in knowing how to add SQlExpressionFields to ReportDocument.
Regards,
-atul

Thanx Don & Ludek for the reply.
CR provides support for addition/modification of SQLExpressions.
CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
innerReport .SQLExpressionFields.Add(name, strSQLExpression)
CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
Thanx
-atul
Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

Interface Mapping not supported in the JPA specification?

Similar Messages

Maybe you are looking for