Interface mapping Object doesn't exist in runtime cache

Hi SDN,
Now I am trying to finish a senario that Getting an IDOC of R/3 into a file by XI. I can get the xml message by tcode IDX5, but always get the following error infromation by IDX5:
===============
Interface mapping Object ID E4815D26AD5B35D2B89A5557DBE045E7 Software Component 2F1990F0E66D11DB9DC2C239C0A8007A does not exist in runtime cache
===============
What happens?
Thanks for your time ahead!
Bruce

HI,
See the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla

Similar Messages

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
   IN BACKGROUND TASK
   DESTINATION 'PI_DEST'
   EXPORTING
     t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

Interface mapping Object _Doesn't exist in RuntimeCache_Error_SXMB_MONI

Hi EXperts ,
Issue in XI --Dev System
I have an simple IDOC (DESADV.DELVRY03) ->Flat File Scenario . Mapping is done as per the Line of Business requirements .
I have tested mapping and I get the response as expected.
We released the IDOC (Outbound Processing ) in SAP R/3 , but I get the mapping error in SXMB_MONI.
Error:
SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 61CFAE955F1A345ABEA3081C92818052 Software Component C31B3EB0F7B811DFC3F3ECDD0AE005A3</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 61CFAE955F1A345ABEA3081C92818052 Software Component C31B3EB0F7B811DFC3F3ECDD0AE005A3 does not exist in runtime cache</SAP:Stack>
Activtaed the Interfcae mapping and refeshed the configurtaion Object : Interface , Receiver Determination.Noticed that we have error in Cache Notifictaion --Design Part . The Configuration --Cache update is fine.
I have raised the Ticket to resolve this error.
But as this was high proirity task to be delivered,how can i try fixing this issue myself . I have tried couple of times, creating new interface mapping , activating , referring new interface mapping in : Interface , Reciever Determination but nothing fix this issue.
Please provide me inputs.
Thanks,
Vara

Thanks to all of your for your support .
Yes as Udo said , I did reassign the Interface mapping in : Interface Determintaion / Reciever Determination and activated .
Buta s this isuse was in Development System , and I reliased that there was mismatch of Password entered for : PIAPPLUSER --pipeline user and Cache Error with SLD in Design . Configurtaion / SLD .
Raised ticket for Cache Error which got solved . Resetting password of PI service user also worked .
Release new IDOC in WE19(--outbound DESADV.DELVRY03) and it was successfully processed to File(xml).
Best Regards,
Varalakshmi

Interface Mapping Doesnot Exist in Runtime Cache

Hi
I am doing Http - Webservice scenario.I have created all the mappings but when I am testing I am getting the following error
<SAP:Error><SAP:Category>XIServer</SAP:Category><SAP:Code>MAPPING.NO_MAPPINGPROGRAM_FOUND</SAP:Code><SAP:P1>http://sample.sc.com/filetofile OrderProcess_To_Webservice_IM</SAP:P1><SAP:Stack>Interface mapping http://sample.sc.com/filetofile OrderProcess_To_Webservice_IM does not exist in runtime cache</SAP:Stack></SAP:Error>
I have done Cache refresh in SXI_CACHE and in RWB also I have done all kind of cache refresh. But still I am getting the same error. If I am testing in Intergration Directory I am getting success..
Please help me in resolving this
Regards
Sowmya

Hi
Same error is solved here in the below thread by Restarting the server solved the problem
SOAP Error - XIServer:NO_MAPPINGPROGRAM_FOUND
look at this thread also
ABAP Proxy to SOAP Error..
Regards
Abhishek

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache

Hi,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.

Hi experts,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache : Object ID <ID of Operation Mapping>' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.
The ZBAPI is a wrapper for a standard BAPI with Request, Response and Exception as a structure.
Can anyone please highlight on the above issue also please consider the note above.
Regards,
Rohit.

Interface Mapping Object - No class definition found

Hi
I have created a simple Interface Mapping in the Integration Repo. When i try to TEST the interface mapping i get class not found errors.See the stacktrace below.
LinkageError at JavaMapping.load(): Could not load class: com/sap/xi/tf/_PO_MAPPING_
- java.lang.NoClassDefFoundError: Illegal name: com/sap/xi/tf/_PO_MAPPING_
Looks like some standard sap packages are missing from the CLASSPATH. Anyidea where it has to be specified ?
PO_MAPPING is the message mapping object i have created and the test is successful for this object.However when i reference it in Interface Mapping , i get the above errors.
I suppose XI generates Java Code when i create these objects and the mappings.Any idea where the JVM seems to reference these packages and How to rectify it ?
Thanks
Saravana

Hi,
Please check whether you have applied note 755302.
- Sreekanth

System throwing error " ibase object doesn't exist"

Dear Friends;
in the transaction ib52 when im putting the component number and pressing enter the system is showing me the error
"ibase objec doesn't exist" . Which means system not allowing to search ibase using the component number.
Please help.
shibashish banerjee

Dear Denis,
When I'm putting the component and pressing enter the system should automatically display the ibase related to this component right?
Instead of this the system is throwing me the error " ibase object does'nt exist" . which i feel is incorrect . As per me system should automatically show me ibase , when i enter the component number and press enter.
I checked in ibib and ibin tables as well. No conclusion.
Regards
shibashish banerjee

OM relationship for OD (internal order) object doesn't exist in SAP-HR

Hello,
In SAP-HR, within the OM module, I am trying to link an internal order (OD) as well as a cost center (K) to an organizational unit (O).
But OD object doesn't have standard relationship, as if we could only use this object in infotype 1018 (Account Assignment).
Is it normal??
Thanks,
Stéphane

Hi Stéphane,
External object is one that has master data outside SAP HCM module and in this case OD (Internal order ) if its ouside personnel planning ,there needs to be extra care taken to maintain consitency.please chech t778V.
External Relationships: Simulation Class
interface program need to be devloped should there not be a standar one that suits the need.please also refe SAP Note 390373.
hope it helps
No Worries
KG
Edited by: SAPenjoy:) on Sep 16, 2010 1:35 PM

Admin object doesn't exist in JND tree.

I am using glassfish 9.1.
I created a admin object with command:
asadmin create-admin-object --host localhost --port 4848 -u admin --passwordfile=D:/ProgramFiles/glassfish/bin/asadmin_password.txt --target=domain --restype javax.jms.Queue --raname swiftmq_rar --property QueueName=Ping@router1 jms/PingAfter successful creation, the jndi name "jms/Ping" can not be found in JNDI tree.
Is this normal? How can I use this admin object if this resource does not exist in JNDI tree?

I am using glassfish 9.1.
I created a admin object with command:
asadmin create-admin-object --host localhost --port 4848 -u admin --passwordfile=D:/ProgramFiles/glassfish/bin/asadmin_password.txt --target=domain --restype javax.jms.Queue --raname swiftmq_rar --property QueueName=Ping@router1 jms/PingAfter successful creation, the jndi name "jms/Ping" can not be found in JNDI tree.
Is this normal? How can I use this admin object if this resource does not exist in JNDI tree?

Object Doesn't Exist in Catalog

I have one report on a dashboard that works for everyone (200+) with the exception of 3 users. When these 3 users attempt to run the dashboard - they receive nothing but the title box show up. When they go into edit dashboard - the report (that shows for everyone else) has a little yellow exclamation point - and says "Item no longer exists in the catalog". Each of these users have been able to view this report in the past, and I've checked the report's security settings - and have cleared the cache and had them all sign out and back in. Still they are unable to get this report to return results. I am running 10.1.4.3.1 version of OBIEE.
Any ideas would be greatly appreciated.
Thanks!

As Per my understanding - when your able to view a yellow exclamation mark means - the item was deleted from the catalog / or renamed and saved with diff. name.
Did you check the catalog of the 3 users where the report used to be ?
I hope you have the report in shared folders.
Re-save the report with same previous name and view the results.

ORA-12545; Can't connect because object doesn't exist

For the life of me, I can't figure out why I can't log into the server from my client. I get the ORA-12545 error. I can TNSPing the server from the client as well as ping the client.
Can someone please give me a trick to test which layer is causing the problem. Can't find docs on 8i. I'm using 8i.
Thanks in advance,
Bob

Hi,
Please search tnsnames.ora file in your computer. I hope you can find two copy of it. if so please make sure the tns name parameters are correct in both file.
hope you can solve this problem,
Jagal ([email protected])

Interface map not exist in cache

hi iam configuring proxy to bapi and getting following error
Interface mapping urn:xiworkshop:group00:webapp
PO_out__ZBAPI_PO_CREATE does not exist in runtime cache
i refreshed the cache and done reactivation of the objects
still same story. plz help me
thanks and regards

can you please explain how you refreshed the cache ?

ODS Activation Failure due to Number range object for char doesn't exist

Hi
I am having problem regarding ODS actvatn, My oDS is gttng fail due to number range for char object doesn't exist.
error when checking sid for ODS.
I have made all tests in RSRV for dat Infoobject
can any one suggest me ...........
points will be assigned
kindly mail me 2 [email protected]

Hi,
chk tis blog.. hope it clears wat buffering is
/people/vikash.agrawal/blog/2006/04/05/load-lots-of-data-147faster148-with-buffering-number-range
What is buffering number range:
Buffer the Numbers ( which system picks up from database -in case of Master Data SIDs & in case of Transaction Data Dimension Ids) and use these buffered numbers rather than hitting the database (for each new master data records or for each new combination of SIDs to create a new Dimension Ids). So the concept is
SID Number Range can be Buffered Instead of Accessing the Database for Each SID
Hope its clear!

Interface mapping Object doesn't exist in runtime cache

Similar Messages

Maybe you are looking for