Interface Mapping Object - No class definition found

Hi
I have created a simple Interface Mapping in the Integration Repo. When i try to TEST the interface mapping i get class not found errors.See the stacktrace below.
LinkageError at JavaMapping.load(): Could not load class: com/sap/xi/tf/_PO_MAPPING_
- java.lang.NoClassDefFoundError: Illegal name: com/sap/xi/tf/_PO_MAPPING_
Looks like some standard sap packages are missing from the CLASSPATH. Anyidea where it has to be specified ?
PO_MAPPING is the message mapping object i have created and the test is successful for this object.However when i reference it in Interface Mapping , i get the above errors.
I suppose XI generates Java Code when i create these objects and the mappings.Any idea where the JVM seems to reference these packages and How to rectify it ?
Thanks
Saravana

Hi,
Please check whether you have applied note 755302.
- Sreekanth

Similar Messages

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 . However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
 IN BACKGROUND TASK
 DESTINATION 'PI_DEST'
 EXPORTING
 t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

Interface mapping Object _Doesn't exist in RuntimeCache_Error_SXMB_MONI

Hi EXperts ,
Issue in XI --Dev System
I have an simple IDOC (DESADV.DELVRY03) ->Flat File Scenario . Mapping is done as per the Line of Business requirements .
I have tested mapping and I get the response as expected.
We released the IDOC (Outbound Processing ) in SAP R/3 , but I get the mapping error in SXMB_MONI.
Error:
SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID 61CFAE955F1A345ABEA3081C92818052 Software Component C31B3EB0F7B811DFC3F3ECDD0AE005A3</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Interface mapping Object ID 61CFAE955F1A345ABEA3081C92818052 Software Component C31B3EB0F7B811DFC3F3ECDD0AE005A3 does not exist in runtime cache</SAP:Stack>
Activtaed the Interfcae mapping and refeshed the configurtaion Object : Interface , Receiver Determination.Noticed that we have error in Cache Notifictaion --Design Part . The Configuration --Cache update is fine.
I have raised the Ticket to resolve this error.
But as this was high proirity task to be delivered,how can i try fixing this issue myself . I have tried couple of times, creating new interface mapping , activating , referring new interface mapping in : Interface , Reciever Determination but nothing fix this issue.
Please provide me inputs.
Thanks,
Vara

Thanks to all of your for your support .
Yes as Udo said , I did reassign the Interface mapping in : Interface Determintaion / Reciever Determination and activated .
Buta s this isuse was in Development System , and I reliased that there was mismatch of Password entered for : PIAPPLUSER --pipeline user and Cache Error with SLD in Design . Configurtaion / SLD .
Raised ticket for Cache Error which got solved . Resetting password of PI service user also worked .
Release new IDOC in WE19(--outbound DESADV.DELVRY03) and it was successfully processed to File(xml).
Best Regards,
Varalakshmi

Interface mapping Object doesn't exist in runtime cache

Hi SDN,
Now I am trying to finish a senario that Getting an IDOC of R/3 into a file by XI. I can get the xml message by tcode IDX5, but always get the following error infromation by IDX5:
===============
Interface mapping Object ID E4815D26AD5B35D2B89A5557DBE045E7 Software Component 2F1990F0E66D11DB9DC2C239C0A8007A does not exist in runtime cache
===============
What happens?
Thanks for your time ahead!
Bruce

HI,
See the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla

No class definition found

My directory structure for the JSF application is here
JSFBeans
|
|-------WEB-INF--->mnew
| | |
| | |---->demo
| | |
| | |------->Name.java
| | |------->TableData.java
| |
| |
| |--------------->faces-config.xml
| |--------------->web.xml
|
|--------------->index.html
|--------------->index.jsp
|
|
|
|
|
index.jsp
1. <html>
2. <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
3. <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
4. <f:view>
5. <head>
6. <title>
7. <h:outputText value="#{msgs.windowTitle}"/>
8. </title>
9. </head>
10.
11. <body>
12. <h:outputText value="#{msgs.pageTitle}"/>
13. 
14. <h:form>
15. <h:dataTable value="#{tableData.names}"
16. var="name">
17. <h:column>
18. <h:outputText value="#{name.last}, "/>
19. </h:column>
20.
21. <h:column>
22. <h:outputText value="#{name.first}"/>
23. </h:column>
24. </h:dataTable>
25. </h:form>
26. </body>
27.</f:view>
28.</html>
Name.java
package mnew.demo;
public class Name {
private String first;
private String last;
public Name(String first, String last) {
this.first = first;
this.last = last;
public void setFirst(String newValue) { first = newValue; }
public String getFirst() { return first; }
public void setLast(String newValue) { last = newValue; }
public String getLast() { return last; }
TableData.java
package mnew.demo;
public class TableData {
private static final Name[] names = new Name[]{
 new Name("William", "Dupont"),
 new Name("Anna", "Keeney"),
 new Name("Mariko", "Randor"),
 new Name("John", "Wilson")
public Name[] getNames() { return names;}
the problem that i am getting is i am not able to compile TableData.java
TableData.java:4: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
private static final Name[] names = new Name[]{
^
TableData.java:11: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
public Name[] getNames() { return names;}
^
TableData.java:4: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
private static final Name[] names = new Name[]{
^
TableData.java:5: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
new Name("William", "Dupont"),
^
TableData.java:6: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
new Name("Anna", "Keeney"),
^
TableData.java:7: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
new Name("Mariko", "Randor"),
^
TableData.java:8: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
new Name("John", "Wilson")
^
7 errors
i am getting this error

girishdurgasi wrote:
the problem that i am getting is i am not able to compile TableData.java
TableData.java:4: cannot find symbol
symbol : class Name
location: class mnew.demo.TableData
private static final Name[] names = new Name[]{
^In the future, you should be posting compilation errors in the [New To Java|http://forums.sun.com/forum.jspa?forumID=54] forum. Those are really trivial.
But OK, it just tells you that it cannot find the class Name. Either you haven't imported it, or not taken it in the classpath, or made a typo in classname, or it actually doesn't exist. Still, compilation errors are fairly self-explaining. Use your human powered logical thinking powers. If you still stucks, well, you now know where's the new-to-java forum is. Post future compilation errors (and runtimeexceptions) over there.

Interface Mapping not found error

I'm getting "Interface Mapping <name> (SWCV=<id>) not found" error during runtime. I did not do anything to the specified interface mapping. If I go into the repository and put into modify mode, add space to description, save, activate, it all works fine. Any idea why my interface mappings are getting "lost" in the runtime cache... any way to do a bulk reload of repository objects into the runtime cache?

Hi Tadd,
It may help to eliminate the possible erros:
1) In the Runtime Workbench, simulate the message in the Component Monitoring / Adapter Engine. If this does not work:
2) Try to restart the JVM. I have seen sometimes that the mapping functions stored as Java files do not get refreshed.
Cheers,
Bhanu

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

How to get the latest Version of Interface Mapping

Hi
I made some changes in IR, and when I am sending the Request...as per Monitor..it is not picking up the latest Interface Mapping Object. I am checking it from Trace in Monitor and then cross checking it with Object Version ID in Repository for Interface Mapping.
I cleaned all the cache as well (from Design, Config and also from Admin), but still I am seeing old version id.
Any suggestion....?

Right now I do not have access to XI system but I remember these are the places you can check.
Did you go to http://host:5<sysnr>00/rep/start
There click on the Administration, and log on using XISUPER. Click on Cache and there is a drop down for mapping programs list. Check that out.
regards
SKM

No interface mapping in interface determination.

Hi ALL,
I am doing a simple File to File scenario. i have created all repository elements and activated them.
Now while configuring them in Directory at interface determination level I can enter
inbound Interface but in interface mapping i can´t see my Interface mapping object so i am getting error while testing scenario in Directory.
Can anybody tell me where exactly can be problem_
Please note that i have created interface mapping object in repository.
Thanks,
Atul

Hi Atul,
After creating your business system or business service, click on your BS and include the sender and receiver interfaces.
Regards,
Ramesh P

Webserivces interface mapping error

Hi..
I am doing the Webservices to file scenario. In Test configuration it is showing error in interface mapping.
The below is the error it is showing.
Interface Mapping
Please kindly help in this matter..

Hi,
Previously i am also facing the same problem.
while testing configuration, it shows the follwoing error.
Interface mapping Object ID xxxx Software Component xxxx does not exits in runtime cache
at that time by changing the business servcies, i resolve the problem.
any how, please execute the following URL to refresh cache.
http://<host>:5<sys#>00/CPACache/refresh?mode=full
regards
mahesh.

** Interface Mapping - No Objects Found - IDoc is receiver

Hi Friends,
In our scenario, sender is File & receiver is IDoc. For each record in file, we need to created one IDoc. IDoc is CREMAS.CREMAS05. For this as usual we exported XSD and changed the occurrence of IDOC node as minOccurs="0" maxOccurs="unbounded" (as explained in Michael Blog - 2762) and did the message mapping successfully.
While create Interface Mapping, (Message interface (OB) for File, no message interface for IDoc, we directly use CREMAS.CREMAS05 in the target interface) and 'Read Interfaces' and select the Message Mapping option' it shows 'No Objects Found'. What could be the problem ?
Note that earlier it was working fine (Some times ago), now it is showing this error 'No Objects Found". I am very confused why this error is coming.
Kindly help me friends, to solve this.
Kind regards,
Jegathees P.

Friends,
Thanks for all your reply. When we click Read messages button automaticlly our source message (type) and target message (type) will be selected. Then, we select Mapping Program which is suitable for the Source & Target Message. When we do like this, it is showing the error 'No Objects Found'.
I want to check with you Is this due to what reason ? (Because, earlier it was working fine)
Eventhough we select 'Any' to 'Any' and select the mapping, save. After that If we do consistency check , it will show an warning message about the namespace issue.

"No Objects found" in Interface Mapping

Hi,
I am working on a simple BPM synchronous scenario as follows
File>XI>RFC (request)
RFC (Response)>XI>File
I have done almost everything fine, but while configuring the Receiver determination, I am able to choose the Inbound interfcae, but when I try to select the "Interface Mapping" for the same inbound interface,
it says "No Objects found".
Can anybody help me out in this regard?
I would very much appreciate your help in this regard.
Thanks in advance.
Regards,
Rambabu

Hi Shravan,
I have resolved the issue. In fact there is no mistake done in Repository. In Configuration, I haven't selected the appropriate service, because of this, I wasn't able to see the objects.
Thanks & Regards,
Rambabu

Non BPM process - no mapping object found in interface determination

I'm working on a non BPM synchronous process of kind HTTP=>XI=>RFC
I completed my design and onto config now. I created receiver determination for HTTP (no sender agreement) and receiver determination for RFC. In my interface determination I cannot find mapping objects.
I included in HTTP service, the request, sync and response message and RFC shows up naturally with RFC objects.
Any ideas. I've been struggling with this for over a day now.
Thanks.

Hi Parimala -
Just to clarify, for this scenario, here's what you need:
Design
1. One Message Interface (outbound/synchronous) corresponding to your HTTP request/response. You don't need a Message Interface nor Message Type for your inbound/synchronous RFC.
2. Request Mapping corresponding to request
- HTTP request Message Type to imported RFC (request)
3. Response Mapping corresponding to response
- RFC.response to some Message Type for the response
4. Interface Mapping
- interfaces: your outbound/sync Message Interface corresponding to HTTP request to imported RFC
- at bottom request tab, select your Request mapping (#2 above)
- at bottom response tab, select your Response mapping (#3 above)
Config
When you say the following:
>>>I completed my design and onto config now. I created receiver determination for HTTP (no sender agreement) and receiver determination for RFC.
Don't know if that's a typo, but there should only be one receiver determination based on your sending system/service, sending interface (HTTP one), and interface namespace.
Confirm the above steps and see if that helps.
Regards,
Jin

No class found error in ESR Interface mapping ?

Hi all ,
I am trying to add a java validation in my Interface mapping .
When i am compiling it in eclipse it is working fine.But when i am exporting and using it in my IM it is giving error as
TEst_210/test/validation/OldFileJava6; details: java.lang.NoClassDefFoundError.
i am compiling it in JDK 1.5.is there any compatibility issie???
please helppp.....

Hi XIGIRL,
Compatibility issues: It depends on what version of XI / PI you're on. You can do a bit more research on it bit as far as I remember for PI 7.0 you should use JDK 1.4 & for PI 7.1 you use 1.5. You probably also need to be weary of the Eclipse version you're using & compatibility issues too. I don't think that is your problem though.
Example based on PI 7.0 usage:
When you're exporting from Eclipse (after compiling with JDK 1.4 but you have the option of decididng which JDK you want to compile with)), make sure you export the class as well as the source (there's a check box for this while exporting). You can also double check this when you double click on the imported archive in the PI Integration Repository, you should have the compiled .class file & the .java soure file listed. If you don't see that then you know where the problem lies.
Best Regards, Trevor

Unale to get XSLT object in interface mapping

Hi
i had imported the zip file contaning xslt file for mapping in Import Archives .But during interface mapping, integration builder is not able to show me the created import archive object.
Please Help me out.

Hai Mitesh,
After u r importing a Zip file ( which the zip file contains (.xsl extension...)), make sure in the interface mapping to select xsl type and clik F4 to Select the zip file in the mapping program... and if u doesnt see ...
try by clicking Environment --> Cache notifications and click refresh for some secs... then proceed with above steps u will definitely get...
Regards,
sridhar reddy . k

Interface Mapping Object - No class definition found

Similar Messages

Maybe you are looking for