Interface messages SAP - WMS

Dear experts,
I am looking for the following information. I cannot seem to find a consistent answer, so I hope you can give me some more direction.
I have the following interface requirement:
- My customer wants to interface information towards an external logistics service provider (their WMS), which standard IDOC is most appropriate for this (for sending PO information)
- Then the LSP will do a goods receipt and interface this back towards SAP. Which IDOC can be used for this?
Thanks for your reply!
M

Dear experts,
did you get a chance to look at the question above? Am I directing this question to the right people, or should I bring this question to another forum?
Thanks!
M

Similar Messages

SAP WMS interface to external WMS

Dear all
Present Setup
We are running our independent WMS system, which is called as ASRS, using Oracle Database and with crane, and conveyor controllers, which are managed by VB Modules.
ASRS system is communicating with AS400 system and getting the Goods Receive and Goods Issue messages as a flat file and sending the acknowledgement messages thro FTP.
Ok
Now the customer is planning to implement the SAP IM-WM module and wanted to interface with our WMS system.
Customer is planning to send Goods Receiving and Goods Issue Messages thro IDOC format and also expecting the confirm messages from ASRS in the IDOC format.(The Transfer orders and Confirmation of Transfer orders will be transferred between SAP and ASRS system.)
Some of the possible approaches
Interface EDI subsystem (Gentran or Mercator) on the SAP system and the use EDFACT or ANSI X12 format for the data transfer to our ASRS system.
In our ASRS system we have to develop modules to receive and send the EDIFACT or ANSI X12 format.
Another approach, to use SAP Business Connector which will convert the IDOC format to XML format .In our ASRS system we have develop modules for processing the XML messages.
Can any one suggest the Best solution for the above scenario?
If you need any further info please feel free to post your comments.
My Emailid [email protected]
Anyway my advance thanks for partcipants
Thanks
R.sekar

Hello,
Did you able to crack this, if so... which method you adopted for integration between Automated warehouse (crane system) and SAP WM.
Please suggest.
Regards,
JPS

Com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException in sap pi

Hi all,
I am working on SAP PI 7.3.1 SP09. Currently we have interfaces which uses 50200 port. I have created a http destination from nwa pointing to https://....url. So all of a sudden all the interfaces went to error state. After debugging i found that the port 50200 is replaced with 50201which is https port. After changing the port to initial value ie., 50200 all interfaces are working fine except the one which were pointing to https url and they are showing the following error description.
<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.NullPointerException</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The entire trace is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="3" type="T">Sender scheme external =</Trace>
<Trace level="3" type="T">Sender agency external =</Trace>
<Trace level="3" type="T">Sender party external =</Trace>
<Trace level="3" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Determining the sender agreement</Trace>
<Trace level="3" type="T">##### DG: 3</Trace>
<Trace level="3" type="T">##### TO: 3</Trace>
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine/?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine/?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = 10.66.14.150:50200</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="1" type="T">Remote address = 10.66.10.160</Trace>
<Trace level="1" type="T">User = SFUSER</Trace>
<Trace level="1" type="T">Process ID: 760</Trace>
<Trace level="1" type="T">Work Process ID: 10</Trace>
<Trace level="1" type="T">Message ID = 53BEFE7146893BD5E10000000A420AA0</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="3" type="T">##### DG: 3</Trace>
<Trace level="3" type="T">##### TO: 3</Trace>
<Trace level="1" type="T">Hop engine name = is.02.devpipd1</Trace>
<Trace level="1" type="T">Hop engine type = IS</Trace>
<Trace level="1" type="T">Hop adapter name = XI</Trace>
<Trace level="1" type="T">Hop adapter namespace = http://sap.com/xi/XI/System</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="3" type="T">system-ID = PD1</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = SFUSER</Trace>
<Trace level="1" type="Timestamp">2014-07-10T08:56:37Z INDIA</Trace>
<Trace level="1" type="T">ACL Check is performed</Trace>
<Trace level="1" type="T">XML validation is executed</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">>>>PID delete old pid determination coding</Trace>
<Trace level="3" type="T">Pipeline-Elements for pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T">0001 PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">0002 PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">0003 PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">0004 PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">0005 PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">0006 PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">0007 PLSRV_VIRUS_SCAN_RQ_OUT</Trace>
<Trace level="3" type="T">0008 PLSRV_XML_VALIDATION_RQ_OUT</Trace>
<Trace level="3" type="T">0009 PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">0010 PLSRV_VIRUS_SCAN_RS_INB</Trace>
<Trace level="3" type="T">0011 PLSRV_XML_VALIDATION_RS_INB</Trace>
<Trace level="3" type="T">0012 PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">0013 PLSRV_VIRUS_SCAN_RS_OUT</Trace>
<Trace level="3" type="T">0014 PLSRV_XML_VALIDATION_RS_OUT</Trace>
<Trace level="3" type="T">system-ID = PD1</Trace>
<Trace level="3" type="T">client = 001</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = SFUSER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="2" type="T">Persisting original message</Trace>
<Trace level="3" type="T">Message-Version = 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_INB">
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Start of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_VALIDATION</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">
<Trace level="3" type="T">Pipeline Service = PLSRV_XML_VALIDATION_RQ_INB</Trace>
<Trace level="3" type="T">Skip Inbound Validation =</Trace>
<Trace level="3" type="T">Skip Outbound Validation =</Trace>
<Trace level="3" type="T">Area = XML_VALIDATION_INB</Trace>
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Message does not contain a sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA End of pipeline service processing PLSRVID= PLSRV_XML_VALIDATION_RQ_INB</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MESSAGE_PERS_MAN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="3" type="Timestamp">2014-07-10T08:56:37Z INDIA Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T

HI,
Thank you for your hint. Maybe I just forgot to mention one important fact. We have second SAP Netweaver PI 7.1 which is completely our system. The first one I mentioned in first message is the customer's one. The one we have extra is also connected to MAXIMO and GIS. Settings of this interface is completely same among one thing:
Patch level of XIAF:
1. customers SAP PI level is
Adapter Common Library Version: 1.7.1007.20081105173106.0000, NW07_07_REL (2008-11-07T17:29:47+0000)
Adapter Application Version: 1.7.1007.20081105173106.0000, NW07_07_REL (2008-11-07T17:30:00+0000)
2. our SAP PI level is
Adapter Common Library Version: 1.7.1008.20100215155230.0000, NW07_08_REL (2010-02-15T17:19:21+0000)
Adapter Application Version: 1.7.1008.20100215155230.0000, NW07_08_REL (2010-02-15T17:19:31+0000)
Both of them has Axis Version: Apache Axis version: 1.4 Built on Apr 22, 2006 (06:55:48 PDT)
Also important to mention is fact that same problem happened in our SAP PI, but we implemented last patch of XIAF and it has suddenly started to work. I have suspicion it is somehow connected to this patch. Btw. this patch contains a lot of notes regarding AXIS framework (i.e. 1435998, 1150375, 1048268), so obviously some bugs of the AXIS adapter has been resolved by this patch.
What do you think ?
Thanks

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File to RFC Error com.sap.engine.interfaces.messaging.api.exception.Messagi

Hi ,
I am doing File to RFC Scenario.
My file get picked and I able to view the audit log under RWB message monitoring.
Here I am getting the error
u201CTransmitting the message to endpoint dest://XI_INTEGRATION_SERVER using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message using HTTPTransmitter. Reason: java.net.MalformedURLException: unknown protocol: dest.
Can any one tell me what is the reason.
Regards, Navneet

Hi Prakasu,
I am using PI 7.1 version .
When I opened SMICM there I am finding the HTTP Port as 52000.and the BS at SLD are also using the same Port in URL..
And when i verified with the Basis they confirmed that Exchange profile is set correctly.
But My file adapter is still not able to send the data to IS.
Than I configured a scenario file to file without IR object and in this case data is coming to IS and it is succesfull also.
what is the reason that in this case file adapter not able to push the data to IS.
I used File adapter with NFS protocol.
regards,
navneet

SOAP Sender Error - com.sap.engine.interfaces.messaging.api.exception

Hi,
I am testing a SOAP Sender Channel using a SOAP Client and getting the following error. I have read almost all the posts related to errors in SOAP Channel and also have checked my URL which is correct. AS mentioned in many of the posts, my url goes like
https://<host>:<port>/XISOAPAdapter/MessageServlet?channel=:DEMO:SOAP_s_GETLIST&version=3.0&SenderService=DEMO&interface=si_os_GETLIST&interfaceNamespace=<namespace>
This is the error that I get when sending a message to the interface
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIProxy:PARSE_APPLICATION_DATA:
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1041)
     at sun.reflect.GeneratedMethodAccessor1044_10001.invoke(Unknown Source)*
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
Has Anybody got this problem before? Is it any problem with the SOAP Adapter itself or with the data that is going in the message? If so, What is the possible solution for this?
Thanks,
Rashmi.

Hi Rashmi,
I also think your problem is data related.
Check the response in your SAP PI message monitor (SXMB_MONI) when you trigger a request using SoapUI. It sometimes provides a bit more detail. You design (data types, message types, service interfaces etc.) was done in SAP PI 7 then an Abap Proxy was generated from the service interface?
Sometimes there is an issue between the XSD data type declaration in SAP PI and the conversion to Abap data types that takes place when a proxy is generated from a PI Service Interface.
Check the data that you pass in your request, especially those like datetime fields. Maybe even change some of the data type definitions (like datetime) to a string (request & response) & then test through SoapUI & see if you still get the error. Then you can work out how to best resolve it.
Best Regards, Trevor

Integrated Configurations com.sap.engine.interfaces.messaging.api.exception

Hi guys,
we are using PI 7.11.
With this release local processing on the advanced adapter engine is possible, when using integrated configurations.
This works fine.
Lately I faced an error situation in an RFC to JDBC scenario, when one field doesn´t meet the conditions of the database.
I tried to dig deeper to identify the incorrect value by switch on the trace in the receiver JDBC channel, as I did several times before.
Afterwards I treied to restart the message.
Following error occurs.
com.sap.engine.interfaces.messaging.api.exception.ConfigException: Unable to retrieve interface determination with object ID ab1bf720bf2711dea7d2020000000030 from CPA cache.
I made some test with integrated configurations (FTP to FTP) and come to the result that errors, which require changes on the communication channel e.g. wrong password etc. result in an new object in the CPA cache
trying restart the failed message ends up in the error specified aboce.
Anyone faced the same issue already?
Kind regards
Jochen

HI Jochen,
I feel that you should once go for a CPA Cache refresh from Adapter Engine and try executing your failed messages once again in the adapter engine.
To do a CPA Cache Refresh from the Adapter Engine:
To trigger a cache refresh from the individual Adapter Framework, open a browser window and enter the following URL:
http://<host>:<port>/CPACache/refresh?mode=delta|full
The Monitoring url is like this:
http://<host>:<port>/CPACache
Check this How-to Guide on Cache, it will be useful:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34&overridelayout=true
Thanks
Dhwani

Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all

Hello,
I have an issue configuring a simple File Adapter Content Conversion, it will be great to give me some support as I'am new in the PO Environment.
Iam reading a flat file and trying to write into an XML in the same FTP server
I have a 1 to 1 Mapping as follows
And my Content Conversion at Sender side Looks like this
After running the configuration Iam getting following error message
Error: com.sap.engine.interfaces.messaging.api.exception.RetryControlException: Receiver Determination did not find any receivers at all
My System is the SAP Netweaver Process Intgration 7.4 single Java stack
Do you have any idea how to fix this issue?
Many thanks in advance
Khadim

Hi evrybody
I have enabled the tracing of ICO and have seen that my payload for the message mapping is ok,.
<ns:hartgeldbest_ERP_KT xmlns:ns="http://xxxxxx.de">
<Recordset>
<header>
     <gesellschaft>03</gesellschaft>
     <filiale>000</filiale>
     <satzart>11</satzart>
     <datum>00000000</datum>
     <kennzeichen>1</kennzeichen>
</header>
</Recordset>
</ns:hartgeldbest_ERP_KT>
The issue is on detrmining the RECEIVER in the Main-XML
<sap:Main xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sap="http://sap.com/xi/XI/Message/30" versionMajor="3"versionMinor="1" SOAP:mustUnderstand="1">
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>asynchronous</sap:ProcessingMode>
<sap:MessageId>ae41678e-da87-11e3-cd0f-0000006831a2</sap:MessageId>
<sap:TimeSent>2014-05-13T10:16:43Z</sap:TimeSent>
<sap:Sender>
<sap:Party agency="http://sap.com/xi/XI" scheme="XIParty"/>
<sap:Service>CC_Hartgeldbest_File2Idoc</sap:Service>
</sap:Sender>
<sap:Receiver>
<sap:Party agency="" scheme=""/>
<sap:Service/>
</sap:Receiver>
<sap:Interface namespace="http://xxxxx.de">hartgeldbest_KT_async_out</sap:Interface>
</sap:Main>
Is it possible that the receiver is overwritten due to the Content Conversion? Because if I set my Message Protocol to "File" the receiver determination will work.
Any idea?
Thx
Khadim

Com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax

Hello,
Please explain me the error :
com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.ejb.EJBException: nested exception is: java.lang.RuntimeException: java.lang.NoClassDefFoundError: com/primavera/integration/server/ServerFacade : cannot initialize class because prior initialization attempt failed
Where should I find the issue and how to correct it.
Regards

Hi,
This seems to be related to some deployed components on J2EE-engine being corrupt. Try re-deploy the primavera-component to fix the error. I'm guessing this component is some 3rd party or custom developed component?
Also make sure this component compiles correctly if it's a custom development component.
Br,
Kenneth

Com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException

Hi All,
PI 7.1 is sending the following error:
2009-12-10 15:55:00     Information     Trying to put the message into the send queue.
2009-12-10 15:55:00     Error     Putting message into send queue failed, due to: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id ee6b5d0d-25a6-4aec-0fec-f1099b5335ce(OUTBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: 1;SAPPIDDB.BC_MSG_DUP_CHECK.
2009-12-10 15:55:00     Error     Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id ee6b5d0d-25a6-4aec-0fec-f1099b5335ce(OUTBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: 1;SAPPIDDB.BC_MSG_DUP_CHECK
2009-12-10 15:55:00     Error     MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id ee6b5d0d-25a6-4aec-0fec-f1099b5335ce(OUTBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: DB2 SQL error: SQLCODE: -803, SQLSTATE: 23505, SQLERRMC: 1;SAPPIDDB.BC_MSG_DUP_CHECK
I didn't find anything into OSS... =(   Does anybody can help me?
I really appreciate your help
Regards,
Gilberto Martínez

Hi Suman,
Which PI version you are using? Is it double stack?
We also faced a similar problem few days back.
We have tried a below approach and succeeded.
Can you please check with T-code SXMB_MONI if there are any queues are stopped (Red circle symbol written STOP on it).
Go to t-code SMQ1/SMQ2 and click on the line items, it will open another session which will display the details of message status (Green flag-scheduled).
Click on the Resend button on the tool bar, it will show a pop-up there click on Retain button.
This will help you to restart a stucked EOIO/EO messages.
P.S: You have to determine that how many such kind of queues are stopped and so you have to manually restart those scheduled messages.
Also refer to this thread Queue stopped in sxmb_moni
Try this if it helps.
Regards,
Dipen.

Jar for the package com.sap.engine.interfaces.messaging.api

Dear All,
I am writing a UDF where we want to use the Payload class of package com.sap.engine.interfaces.messaging.api. We are not getting the corresponding jar file.
Please suggest what should be the jar file.
Thanks and Regards,
Rana Brata De

this you can not use at mapping runtime. You can use this API only in Adapter modules.
What is your requirement?
Edited by: Praveen Gujjeti on Feb 27, 2012 4:38 PM

Swift Net MT-103 Interface with SAP

Hello all,
I am having a hard time to understand the concept and reason to use the Swiftnet MT103 (Outgoing Payment).
1)At what point I will consider MT103 solution versus EDI820 (Outgoing Payment)?
2)What will be the considerations I need to take place when I am creating the Functional Design of this interface with SAP?
3)What will be the steps I need to take on the config side?
4)Do I need to setup inbound interface as well for confirmation once I sent the MT103 file?
5)DME will be only solution that produce this format?
6)Please provide me the File structure of MT103?
I would appreciate your prompt response since I need to represent this to the client.
Thanks

Hi
It is a good practice to know the status of payment file rather than waiting for the bank to call. Yes, if need be, you will need to create an inbound interface.
Many things would depend on the method of communcation with banks you choose (i.e. direct connection or value added network), which needs to be secure and encrypted. SWIFTnet is a product that SWIFT offers to allow companies to build a single connection to SWIFT net and connect to thousands of banks around the globe. I am not sure whether this is a valid scenario for your project. Obviously, there is a cost implication attached to it.
If you are using BCM module, you would need to use a format created in Payment media workbench for MT103 and PI to faciliate the file mapping, conversion, encryption and secure transmission to your bank. In this case, you would build an inbound interface for Status/Confirmation from bank into BCM for Batch monitor.
while if you are not using BCM module, you would map IDOC to MT103. in this case, you would build an Inbound Interface to manage the confirmation message from bank. I have worked on this sort of interface development and developed a report output for users to run.
Hope that this helps
taro

Dcs interface with sap pm

Dear experts,
can anyone explain me the basic steps and information regarding dcs interface with sap .
i want to do this sap implementation for the thermal power station. i want to generate notifications and work orders when the parameteres of particular equipment crosses its range.
how the important parameters from the dcs is linked with sap server. how i can get the data from dcs and pass it to the sap system.
can anyone give the helping hand.

Hi,
You can use XI as a connector instead of ALE to connect mySAP ERP to SAP Business One. The DI API is the connector for SAP Business One.
The DI API or Data Interface API is part of Business One and the Business One SDK. B1i exists to easily connect mySAP and SAP Business One without typical coding that would be required simply by using XI to connect with SAP Business One and mySAP. B1i contains all of the connections, pre-defined content, message handling and error correction for common business scenarios to connect these to systems. Without B1i, you have to hand code everything. If you are not connecting with SAP Business One, then you may not have a need or requirement to use B1i. There are more detailed whitepapers here from the SAP Business One main page on SDN. You should have a look at those.
You should have SAP Portal authorisation to access the following info. Go to sevicemarketplace -> smb -> SBO -> Install'n'Updates->Updates->Updates for SAP Business One->SAP Business One Releases prior to 2004->SBO-MYSAP INTEGRAT.TOOLKIT 1.5.
You can find there an presentation how to Integrate SBO with mySAP via XI (https://websmp203.sap-ag.de/~sapidb/011000358700002285912003E.ppt)
Thanks
Swarup

IDOC type for interface between SAP ECC and SAP F&R

Hi Experts,
I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
Please help me in finding the idoc type?
Regards,
Krishan

Hi Denish,
You have 2 ways of loading data from R/3 to APO.
1. R/3 to BW cube to APO-BW cube to APO planning area
or
2. R/3 to APO-BW cube to APO planning area
BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

Interface and SAP system issue

hi Experts
Scenario : We have External system (Interface) and SAP system. GR usually done in External system for stock materials PO , then it will transfered and updated in SAP system thro IDOC daily bases.
And then in SAP ,Zreport is there to find out any discrepancy in stocks(Between Extrnl and SAP system).
Problem: They had done GR in external system and they had transferred to SAP throu IDOC. (This usually bieing processed for 1000 of materials.
Now for some materials its showing discrepancy error in Zreport eventhough the SAP system got updated on stocks throu IDOC from external system. ( Not for all materials only for very few case).
So any experts has come across this kind situation in thier experiance .. how to solve this ??
Note : If any Bacth job is being done in background in SAP after updation the stocks in SAP system throu IDOC. How to find out the batch job in back groud ???
Thanks

hii
Thanks for ur response.
I did't mention in previous message, IDOC got posted in SAP system perfectly without any error . (I have cross checked IDOC).
But after idoc posting in SAP system , the Zreport getting updated , so here is my confusion and doubt.
Where there can be any system in background to update stocks in Zreport from SAP system. Is it possible to find from our side batch job has being processed between standard SAP and Zreport .
There is any way to find ???
Thanks

Interface messages SAP - WMS

Similar Messages

Maybe you are looking for